summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/arm
AgeCommit message (Collapse)AuthorFilesLines
2022-12-16dt-bindings: drop redundant part of title (end, part three)Krzysztof Kozlowski10-10/+10
The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-12-16dt-bindings: drop redundant part of title (end)Krzysztof Kozlowski29-29/+29
The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding", but instead just describe the hardware. Drop trailing "Devicetree bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds1-0/+52
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-13Merge tag 'devicetree-for-6.2' of ↵Linus Torvalds2-28/+27
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT Bindings: - Various LED binding conversions and clean-ups. Convert the ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas. Consistently reference LED common.yaml or multi-led schemas and disallow undefined properties. - Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts, and fsl,imx-fb bindings to schema - Add ata-generic, Broadcom u-boot environment, and dynamic MTD sub-partitions bindings. - Make all SPI based displays reference spi-peripheral-props.yaml - Fix some schema property regex's which should be fixed strings or were missing start/end anchors - Remove 'status' in examples, again... DT Core: - Fix a possible NULL dereference in overlay functions - Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which never worked) - Add of_address_count() helper to count number of 'reg' entries - Support .dtso extension for DT overlay source files. Rename staging and unittest overlay files. - Update dtc to upstream v1.6.1-63-g55778a03df61" * tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits) dt-bindings: leds: Add missing references to common LED schema dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() dt-bindings: lcdif: Fix constraints for imx8mp media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties dt-bindings: Drop Jee Heng Sia dt-bindings: thermal: cooling-devices: Add missing cache related properties dt-bindings: leds: irled: ir-spi-led: convert to DT schema dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema dt-bindings: leds: mt6360: rework to match multi-led dt-bindings: leds: lp55xx: rework to match multi-led dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix dt-bindings: leds: lp55xx: allow label dt-bindings: leds: use unevaluatedProperties for common.yaml dt-bindings: thermal: tsens: Add SM6115 compatible of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema dt-bindings: Add missing start and/or end of line regex anchors dt-bindings: qcom,pdc: Add missing compatibles ...
2022-12-13Merge tag 'pinctrl-v6.2-1' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "The two large chunks is the header clean-up from Andy and the Qualcomm DT bindings clean-up from Krzysztof. Each which could give rise to conflicts, but I haven't seen any. The YAML conversions happening around the device tree is the biggest item in the series and is the result of Rob Herrings ambition to autovalidate these trees against strict schemas and it is paying off in lots of bugs found and ever prettier device trees. Sooner or later the transition will be complete, Krzysztof is fixing up all of the Qualcomm stuff, which is pretty voluminous. Core changes: - minor but nice and important documentation clean-ups New drivers: - subdriver for the Qualcomm SDM670 SoC - subdriver for the Intel Moorefield SoC - trivial support for the NXP Freescale i.MXRT1170 SoC Other changes and improvements - major clean-up of the Qualcomm pin control device tree bindings by Krzysztof - major header clean-up by Andy - some immutable irqchip clean-up for the Actions Semiconductor and Nuvoton drivers - GPIO helpers for The Cypress cy8c95x0 driver - bias handling in the Mediatek MT7986 driver - remove the unused pins-are-numbered concept that never flew" * tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits) pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions() dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered pinctrl: stm32: Remove check for pins-are-numbered pinctrl: mediatek: common: Remove check for pins-are-numbered pinctrl: qcom: remove duplicate included header files pinctrl: sunxi: d1: Add CAN bus pinmuxes pinctrl: loongson2: Fix some const correctness pinctrl: pinconf-generic: add missing of_node_put() pinctrl: intel: Enumerate PWM device when community has a capability pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() pwm: lpss: Allow other drivers to enable PWM LPSS pwm: lpss: Include headers we are the direct user of pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS pwm: Add a stub for devm_pwmchip_add() pinctrl: k210: call of_node_put() pinctrl: starfive: Use existing variable gpio dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching pinconf-generic: fix style issues in pin_config_param doc pinctrl: pinctrl-loongson2: fix Kconfig dependency ...
2022-12-12Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds15-488/+255
Pull ARM SoC DT updates from Arnd Bergmann: "The devicetree changes contain exactly 1000 non-merge changesets, including a number of new arm64 SoC variants from Qualcomm and Apple, as well as the Renesas r9a07g043f/u chip in both arm64 and riscv variants. While we have occasionally merged support for non-arm SoCs in the past, this is now the normal path for riscv devicetree files. The most notable changes, by SoC platform, are: - The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips now have initial support. This is particularly nice as I am typing this on a T6002 Mac Studio with only a small number of driver patches. - Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662), SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670 (Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon 650) are all mobile phone chips that are closely related to others we already support. Adding those helps support more phones and we add several models from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3, 3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and Google (Pixel 3a). There are also new variants of the Herobrine and Trogdor chromebook motherboards. SA8540P is an automotive SoC used in the Qdrive-3 development platform - Rockchips gains no new SoC variants, but a lot of new boards: three mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two more Anbernic gaming systems based on RK3566 and a number of other RK356x based single-board computers. - Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as the newly added RZ/Five is based on the same design, this now gets reorganized in order to share most of the dts description between the two and add the RZ/Five SMARC EVK board support. Aside from that, there are the usual changes all over the tree: - New boards on other platforms contain two ASpeed BMC users, two Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based Kobo Aura2 ebook reader, two i.MX8 based development boards, two Uniphier Pro5 development boards, the STM32MP1 testbench board from DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek Helio X10 based Sony Xperia M5 phone. - The Starfive JH7100 source gets reorganized in order to support the VisionFive V1 board. - Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI, ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton, Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500, spear, ... The treewide cleanups now have a lot of fixes for cache nodes and other binding violoations. - Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and Renesas platforms, adding a lot more on-chip device support - A rework of the way that DTB overlays are built" * tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits) arm64: dts: apple: t6002: Fix GPU power domains arm64: dts: apple: t600x-pmgr: Fix search & replace typo arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes arm64: dts: apple: Rename dart-sio* to sio-dart* arch: arm64: apple: t600x: Use standard "iommu" node name arch: arm64: apple: t8103: Use standard "iommu" node name ARM: dts: socfpga: Fix pca9548 i2c-mux node name dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define dt-bindings: iio: adc: qcom,spmi-vadc: extend example arm64: dts: qcom: sc8280xp: fix UFS DMA coherency arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI arm64: dts: qcom: sm8450: align MMC node names with dtschema arm64: dts: qcom: sc7180-trogdor: use generic node names arm64: dts: qcom: sm8450-hdk: add sound support arm64: dts: qcom: sm8450: add Soundwire and LPASS ...
2022-12-07Merge tag 'qcom-drivers-for-6.2-2' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for 6.2 Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550. Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver. Support for SM8550 and SM4250 ARC regulators are added to the RPM(h) power-domain drivers. SM8550 support is added to the LLCC driver. The AOSS QMP binding is declared compatible for SM8550. BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built properly. * tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155 dt-bindings: soc: qcom: apr: document generic qcom,apr compatible soc: qcom: Select REMAP_MMIO for ICC_BWMON driver soc: qcom: Select REMAP_MMIO for LLCC driver soc: qcom: rpmpd: Add SM4250 support dt-bindings: power: rpmpd: Add SM4250 support dt-bindings: soc: qcom: aoss: Add compatible for SM8550 soc: qcom: llcc: Add configuration data for SM8550 dt-bindings: arm: msm: Add LLCC compatible for SM8550 soc: qcom: llcc: Add v4.1 HW version support soc: qcom: socinfo: Add SM8550 ID soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets soc: qcom: rpmhpd: Add SM8550 power domains dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976 Link: https://lore.kernel.org/r/20221207154134.3233779-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-07Merge tag 'qcom-dts-for-6.2-2' of ↵Arnd Bergmann3-15/+80
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm DTS updates for 6.2 This introduces support for the OnePlus One, on MSM8974Pro, and properly marks other Pro devices as compatible thereof. Also on MSM8974, the description of USB devices and their PHYs are cleaned up. On the binding side compatibles for recently added ARM and ARM64 boards are added. * tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (102 commits) dt-bindings: arm: qcom: Add zombie ARM: dts: qcom: msm8974: Add OnePlus One dt-bindings: arm: qcom: Document oneplus,bacon device ARM: dts: qcom: msm8974: clean up USB nodes arm: dts: qcom: use qcom,msm8974pro for pro devices dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974 ARM: dts: qcom: align LED node names with dtschema dt-bindings: arm: qcom: Document additional sa8540p device dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224) dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devices dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible dt-bindings: arm: cpus: add qcom kryo 360 compatible ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema ARM: dts: qcom-msm8960: use define for interrupt constants dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema ARM: dts: qcom: msm8226: Add MMCC node dt-bindings: arm: qcom: Separate LTE/WIFI SKU for sc7280-evoker dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards ... Link: https://lore.kernel.org/r/20221207153201.3233015-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-06dt-bindings: Move fixed string node names under 'properties'Rob Herring1-27/+27
Fixed string node names should be under 'properties' rather than 'patternProperties'. Additionally, without beginning and end of line anchors, any prefix or suffix is allowed on the specified node name. These cases don't appear to want a prefix or suffix, so move them under 'properties'. In some cases, the diff turns out to look like we're moving some patterns rather than the fixed string properties. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221118223708.1721134-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-12-05dt-bindings: arm: qcom: Add zombieOwen Yang1-0/+10
Add entries in the device tree binding for sc7280-zombie. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221205133603.v15.1.Idfcba5344b7995b44b7fa2e20f1aa4351defeca6@changeid
2022-12-05dt-bindings: arm: qcom: Document oneplus,bacon deviceLuca Weiss1-0/+1
Document the OnePlus One ("bacon") which is a smartphone based on the Snapdragon 801 SoC. Also allow msm8974(pro) devices to use qcom,msm-id and qcom,board-id. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221128172531.828660-1-luca@z3ntu.xyz
2022-12-05dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974Dmitry Baryshkov1-3/+8
The MSM8974 Pro (AC) and bare MSM8974 are slightly different platforms. Split the compat strings accordingly to clearly specify the platform used by the device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221128131550.858724-1-dmitry.baryshkov@linaro.org
2022-12-05dt-bindings: arm: qcom: Document additional sa8540p deviceParikshit Pareek1-0/+1
Add the qdrive3 ride device to the valid device compatibles found on the sa8540p platform. Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118025158.16902-2-quic_ppareek@quicinc.com
2022-12-05dt-bindings: arm: msm: Add LLCC compatible for SM8550Abel Vesa1-0/+1
Add LLCC compatible for SM8550 SoC. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221116113005.2653284-3-abel.vesa@linaro.org
2022-12-05dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224)Konrad Dybcio1-0/+1
Add a compatible for Sony Xperia 5 IV. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114095654.34561-1-konrad.dybcio@linaro.org
2022-12-05dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devicesMarijn Suijten1-0/+8
Note that msm8976 is omitted as a compatible, since there are currently no boards/devices using it. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221111120156.48040-9-angelogioacchino.delregno@collabora.com
2022-11-30Merge tag 'arm-soc/for-6.2/devicetree' of ↵Arnd Bergmann1-0/+2
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.2, please pull the following: - Linus adds support for the D-Link DWL-8610AP which is based upon the BCM53016 SoC and the D-Link DIR-890L routers - Maxime resolves a long standing issue affecting Raspberry Pi devices by switching entirely over to the VPU firmware clock provider rather than mixing the "bare metal" clock driver and VPU - Rafal corrects the description of the TP-Link router partitions to use the "safeloader" partition parser - Stefan fixes a number of invalid underscores in the bcm283x DTS files and also moves the ACT LED into a separate DTS include file for better re-use - Krzysztof aligns the LEDs DT nodes to the proper schema format - Pierre adds missing cache properties to various SoCs * tag 'arm-soc/for-6.2/devicetree' of https://github.com/Broadcom/stblinux: arm: dts: Update cache properties for broadcom ARM: dts: broadcom: align LED node names with dtschema ARM: dts: bcm283x: Move ACT LED into separate dtsi ARM: dts: bcm283x: Fix underscores in node names ARM: dts: BCM5301X: Correct description of TP-Link partitions ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L dt-bindings: ARM: add bindings for the D-Link DIR-890L ARM: dts: bcm2835-rpi: Use firmware clocks for display ARM: dts: bcm283x: Remove bcm2835-rpi-common.dtsi from SoC DTSI ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP dt-bindings: ARM: add bindings for the D-Link DWL-8610AP Link: https://lore.kernel.org/r/20221129191755.542584-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-30Merge tag 'qcom-arm64-for-6.2' of ↵Arnd Bergmann3-0/+97
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DTS updates for 6.2 This introduces support for SM4250, SM6115, SM6375 and SDM670 platforms and Sony Xperia 10 IV, Google Pixel 3a, OnePlus 3, OnePlus 3T, Google Pazquel and OnePlus Nord N100. A wide variety of updates to align with DeviceTree bindings across many/most platforms is introduced, and incorrectly styled comments are adjusted across the tree. Apps RSC is added to the cluster-idle power-domain across SM8150, SM8250, SM8350 and SM8450, to ensure sleep and wake votes are flushed as the last core is being powered down. Remoteproc firmware patches are aligned with agreed upon structure used in linux-firmware across Inforce 6560, Lenovo Miix 630, various Sony Xperia devices and Samsung Galaxy Book2 (although these are not available in linux-firmware today). On IPQ8074 CPU clocks are added, thermal zones are introduced and vqmmc supply is specified for the HK01 board. Alcatel OneTouch Idol 3 gains LED nodes and Samsung Galaxy A3U gained vibrator support. The application subsystem's IOMMU and the display subsystem is enabled for MSM8953. A new CPU frequency table is introduced for MSM8996Pro, to properly describe it separate of MSM8996. The GPU opp-table is extended as well. On SC7180 USB is marked as a wakeup source, USB gains required-opps to ensure that the core voltage rail is voted for as needed. The description of the fingerprint sensor in Trogdor is corrected. On SC7280 Wake-on-WLAN is introduced, and PHY parameters for the SNPS USB PHY is defined across SC7280. The memory map across Google Herobrine is adjusted, to regain unused memory on the WiFi SKUs. A LTE SKU of the Evoker board is introduced and the bard gains touchscreen. NVME support is disabled on Villager boards, as it's not used. PCIe support is introduced on SC8280XP, with NVMe, SDX55 (5G) and WiFi enabled on the Lenovo Thinkpad X13s and Compute Reference Device. ADCs and thermal zones are intrduced for the same. Lenovo Thinkpad X13s gains LID switch support. Fairphone FP3 gains touchscreen support. Support for Xiaomi Poco F1 variant with EBBG panel. The round-robin ADC is enabled across DB845c, OnePlus devices and Pocophone F1 devices. The displayport controller on SDM845 is introduced. SM6350 gains SDHCI support and on Sony Xperia 10 III sd-card, touchscreen and GPI DMA is enabled. Fairphone FP4 got SD-card support. UFS PHY register ranges are corrected across SM8150, SM8250, SM8350 and SM8450. Sony Xperia 1 II got NFC support and Sony Xperia 5 III got PMIC regulators defined and USB definition corrected, to enable USB3. The SDHCI controller is described for SM8450 and microSD support is enabled for the HDK and QRD devices. SM8450 also gains camera CCI interface and display clock controller. * tag 'qcom-arm64-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (261 commits) arm64: dts: qcom: sdm845-polaris: Don't duplicate DMA assignment arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3 arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators arm64: dts: qcom: sc7280: Make herobrine-audio-rt5682 mic dtsi's match more arm64: dts: qcom: trim addresses to 8 digits arm64: dts: msm8998: unify PCIe clock order withMSM8996 arm64: dts: msm8998: add MSM8998 specific compatible arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller arm64: dts: qcom: sc8280xp-x13s: enable modem arm64: dts: qcom: sc8280xp-x13s: enable NVMe SSD arm64: dts: qcom: sc8280xp-crd: enable WiFi controller arm64: dts: qcom: sc8280xp-crd: enable SDX55 modem arm64: dts: qcom: sc8280xp-crd: enable NVMe SSD arm64: dts: qcom: sc8280xp-crd: rename backlight and misc regulators arm64: dts: qcom: sa8295p-adp: enable PCIe arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes arm64: dts: qcom: add sdm670 and pixel 3a device trees arm64: dts: qcom: sc7280: Add Google Herobrine WIFI SKU dts fragment arm64: dts: qcom: sc7280: Mark all Qualcomm reference boards as LTE arm64: dts: qcom: sm7225-fairphone-fp4: Enable SD card ... Link: https://lore.kernel.org/r/20221124100650.1982448-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-29Merge tag 'v6.2-rockchip-dts64-1' of ↵Arnd Bergmann1-0/+42
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into asahi-wip New boards: - Model A and blade baseboards for the SOQuartz (rk3568) SoM, - Anberic RG351M, RG353V, RG353VS; Odroid Go Super, Advance gaming devices - Odroid M1 - Theobroma px30 SoM with baseboard - Rockchip's own rk3566 demo board Some core support for per SoC specifics: - crypto support for rk3399 and rk3328 - second I2S controller for rk3568 - Cache properties for follow the binding for rk3308 and rk3328 Bigger device support updates for: - SOQuartz: PCIe2, video output, gpu, HDMI sound - Rock 3A: eth regulator, eth clock input, Wifi+Bt, I2S, PCIe3 As well as some minor extensions for Rock960 (hdmi supplies), rk3566-roc-pc (PCIe2), Rock 4C+ (thermal support), Pinephone Pro (Wifi+Bt) * tag 'v6.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (51 commits) arm64: dts: rockchip: update cache properties for rk3308 and rk3328 arm64: dts: rockchip: Add SOQuartz Model A baseboard dt-bindings: arm: rockchip: Add SOQuartz Model A arm64: dts: rockchip: Add SOQuartz blade board dt-bindings: arm: rockchip: Add SOQuartz Blade arm64: dts: rockchip: Add Anbernic RG351M arm64: dts: rockchip: Add Odroid Go Super arm64: dts: rockchip: Add Odroid Go Advance Black Edition dt-bindings: arm: rockchip: Add more RK3326 devices arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI arm64: dts: rockchip: Add support of regulator for ethernet node on Rock 3A SBC arm64: dts: rockchip: Add support of external clock to ethernet node on Rock 3A SBC arm64: dts: rockchip: Add HDMI supplies on Rock960 arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board dt-bindings: rockchip: Add Rockchip rk3566 box demo board arm64: dts: rockchip: Enable PCIe 2 on SOQuartz CM4IO arm64: dts: rockchip: Enable HDMI sound on SOQuartz arm64: dts: rockchip: Enable video output and HDMI on SOQuartz arm64: dts: rockchip: Enable GPU on SOQuartz CM4 arm64: dts: rockchip: enable pcie2 on rk3566-roc-pc ... Link: https://lore.kernel.org/r/4716610.aeNJFYEL58@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-23Merge tag 'amlogic-arm64-dt-for-v6.2' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT changes for v6.2: - meson-gxl: add SPI pinctrl nodes for CLK - meson-gxbb: add SPI pinctrl nodes for CLK - Enable active coling using gpio-fan on Odroid N2/N2+ - remove clock-frequency from rtc - Update cache properties for amlogic - Add DDR PMU node for G12 series SoC - document Odroid Go Ultra compatible - add initial Odroid Go Ultra DTS * tag 'amlogic-arm64-dt-for-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: add initial Odroid Go Ultra DTS dt-bindings: amlogic: document Odroid Go Ultra compatible arm64: dts: meson: Add DDR PMU node arm64: dts: Update cache properties for amlogic arm64: dts: meson: remove clock-frequency from rtc arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+ arm64: dts: meson-gxbb: add SPI pinctrl nodes for CLK arm64: dts: meson-gxl: add SPI pinctrl nodes for CLK Link: https://lore.kernel.org/r/8faa1d3c-5a17-2c3f-92d1-f8fe3df74131@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-23Merge tag 'ti-k3-dt-for-v6.2' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 devicetree updates for v6.2 New Features: J721e: * PWMs, BeagleBone AI-64 platform. J721s2: * Crypto AM65/AM62: * General purpose Timer support (system timer is still arch timer) Fixes: * Bunch of fixes in crypto usage and GPIO intr * Minor schema related fixes for audio, addressing etc. Cleanups: * Refactor of device tree to "disable" peripherals at SoC level for nodes that are un-usable without board level properties. TI K3 devices have large number of peripherals of which only a smaller subset is actually enabled on platforms. Switching to this approach enables two benefits: lesser confusion in creating board level devicetrees as only relevant pinned out device nodes need enabled, as well as smaller board device trees as most un-used peripherals don't need to explicitly disabled. * tag 'ti-k3-dt-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (61 commits) arm64: dts: ti: Add k3-j721e-beagleboneai64 dt-bindings: arm: ti: Add bindings for BeagleBone AI-64 arm64: dts: ti: k3-j721s2-main: Enable crypto accelerator arm64: dts: ti: k3-am64-main: Drop RNG clock arm64: dts: ti: k3-j721e-main: Drop RNG clock arm64: dts: ti: k3-am65-main: Drop RNG clock arm64: dts: ti: j721e-common-proc-board: Fix sound node-name arm64: dts: ti: k3-j721s2: Fix the interrupt ranges property for main & wkup gpio intr arm64: dts: ti: k3-j7200-mcu-wakeup: Drop dma-coherent in crypto node arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node arm64: dts: ti: k3-am62: Add general purpose timers for am62 arm64: dts: ti: k3-am65: Add general purpose timers for am65 arm64: dts: ti: k3-am65: Configure pinctrl for timer IO pads arm64: dts: ti: Trim addresses to 8 digits arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs arm64: dts: ti: k3-am65: Enable McASP nodes at the board level arm64: dts: ti: k3-am65: Enable Mailbox nodes at the board level arm64: dts: ti: k3-am65: Enable PCIe nodes at the board level ... Link: https://lore.kernel.org/r/20221122190209.jwfj56d6kxpxdkua@untreated Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-23Merge tag 'aspeed-6.2-devicetree' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt ASPEED device tree updates for 6.2 - New machines * IBM Bonnell AST2600 BMC, for a Power10 server * Delta AHE-50DC AST1250 BMC, for a 1U Open19 power shelf - Removed machines * IBM Mihawk AST2500 BMC, a Power9 server similar to Witherspoon - Fixes and updates for bletchley, mtjade/mtmitchell, rainier/everest * tag 'aspeed-6.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: mtjade: Add SMPro nodes ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes ARM: dts: aspeed: Add Delta AHE-50DC BMC dt-bindings: arm: aspeed: document Delta AHE-50DC BMC ARM: dts: aspeed: rainier: Fix pca9551 nodes ARM: dts: aspeed: p10bmc: Add occ-hwmon nodes ARM: dts: aspeed-g6: Add aliases for mdio nodes ARM: dts: aspeed: Remove Mihawk ARM: dts: aspeed: rainier,everest: Move reserved memory regions ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree ARM: dts: aspeed: bletchley: Enable emmc and ehci1 ARM: dts: aspeed: bletchley: Update and fix gpio-line-names ARM: dts: aspeed: bletchley: Update fusb302 nodes ARM: dts: aspeed: bletchley: Bind presence-sledX pins via gpio-keys ARM: dts: aspeed: bletchley: Disable GPIOV2 pull-down ARM: dts: aspeed: bletchley: Change LED sys_log_id to active low Link: https://lore.kernel.org/r/CACPK8Xfsc8BaL_qAgV+3Rk-AFcQoDVfTpMzHvq_rR-UYqwpNNQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-23Merge tag 'qcom-drivers-for-6.2' of ↵Arnd Bergmann1-0/+120
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for 6.2 The qcom,msm-id and qcom,board-id DeviceTree properties are documented, to allow them to be used in configurations or devices requiring these and the socinfo driver is updated to reuse the introduced identifiers. The rpmh-rsc driver is extended to register for PM runtime notifications from the CPU clusters, in order to submit sleep and wake votes the last core in a cluster is being powered down. A mechanism for keeping rpmhpd resources voted until sync_state is introduced, this ensures that power-domains required during boot are kept enabled. The rpmhpd power-domains for SDM670 are also added. Support for the new QDU1000/QRU1000 platform is introduced in the rpmhpd and socinfo drivers. The APR driver gains missing error handling. QMI message descriptors in the PDR driver are made const. Support for the RPM found in SM6375 is added. The SPM driver gains support for MSM8939 and MSM8976 platforms. The stats and command-db drvers are marked as not having PM support. * tag 'qcom-drivers-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (36 commits) dt-bindings: firmware: scm: add sdm670 compatible soc: qcom: rpmh-rsc: Write CONTROL_TCS with next timer wakeup soc: qcom: rpmh-rsc: Save base address of drv PM: domains: Store the next hrtimer wakeup in genpd soc: qcom: rpmh-rsc: Attach RSC to cluster PM domain dt-bindings: soc: qcom: Update devicetree binding document for rpmh-rsc dt-bindings: soc: qcom: qcom,smd-rpm: Use qcom,smd-channels on MSM8976 soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index soc: qcom: socinfo: Add QDU1000/QRU1000 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for QDU1000/QRU1000 soc: qcom: rpmhpd: Add QDU1000/QRU1000 power domains dt-bindings: power: rpmpd: Add QDU1000/QRU1000 to rpmpd binding dt-bindings: qcom: smp2p: Add WPSS node names to pattern property soc: qcom: spm: Implement support for SAWv2.3, MSM8976 L2 PM dt-bindings: soc: qcom: spm: Add compatibles for MSM8976 L2 soc: qcom: llcc: make irq truly optional soc: qcom: spm: Add MSM8939 SPM register data dt-bindings: soc: qcom: spm: Add MSM8939 CPU compatible dt-bindings: soc: qcom: aoss: Add sc8280xp compatible dt-bindings: firmware: document Qualcomm SM6375 SCM ... Link: https://lore.kernel.org/r/20221122202748.1854487-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-22dt-bindings: arm: rockchip: Add SOQuartz Model ANicolas Frattaroli1-0/+1
The SOQuartz Model A base board is a carrier board for the CM4 form factor, designed around the PINE64 SOQuartz CM4 SoM. The board sports "Model A" dimensions like the Quartz64 Model A, but is not to be confused with that. As for I/O, it features USB 2 ports, Gigabit Ethernet, a PCIe 2 x1 slot, HDMI, a 40-pin GPIO header, CSI/DSI connectors, an eDP flat-flex cable connector, a 12V DC barrel jack for power input and power/reset buttons as well as a microSD card slot. Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221116115337.541601-4-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-22dt-bindings: arm: rockchip: Add SOQuartz BladeNicolas Frattaroli1-0/+1
Add a compatible for the SOQuartz Blade base board to the rockchip platforms binding. The SOQuartz Blade is a PoE-capable carrier board for the CM4 SoM form factor, designed around the SOQuartz CM4 System-on-Module. The board features the usual connectivity (GPIO, USB, HDMI, Ethernet) and an M.2 slot for SSDs. It may also be powered from a 5V barrel jack input, and has a 3.5mm jack for UART debug output. Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221116115337.541601-2-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-22dt-bindings: arm: rockchip: Add more RK3326 devicesMaya Matuszczyk1-0/+15
This patch adds Anbernic RG351M, Odroid Go Advance Black Edition and Odroid Go Super into dt bindings. Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221117215954.4114202-3-maccraft123mc@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-22Merge tag 'v6.1-next-dts64' of ↵Arnd Bergmann1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt Fix check warnings all over the place. mt7986: - Add crypto, I2C and SPI nodes mt6795: - Add clock nodes - Add DMA support for UARTs - Add MMC nodes - Add basic support for Sonyx Xperia M5 mt8195: - Add video enconder node - Add PCIe support - Fine tune capacity-dmips-mhz - Add support for internal and external display port * tag 'v6.1-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (35 commits) arm64: dts: mt7986: add spi related device nodes arm64: dts: mt7986: move wed_pcie node arm64: dts: mediatek: Add support for MT6795 Sony Xperia M5 smartphone dt-bindings: arm: mediatek: Add compatible for MT6795 Sony Xperia M5 arm64: dts: mediatek: mt6795: Add support for eMMC/SD/SDIO controllers arm64: dts: mediatek: mt6795: Add support for APDMA and wire up UART DMAs arm64: dts: mediatek: mt6795: Replace UART dummy clocks with pericfg arm64: dts: mediatek: mt6795: Add topckgen, infra, peri clocks/resets arm64: dts: mediatek: cherry: Add edptx and dptx support arm64: dts: mediatek: cherry: Add dp-intf ports arm64: dts: mt8195: Add edptx and dptx nodes arm64: dts: mt8195: Add dp-intf nodes arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings arm64: dts: mt2712-evb: Fix usb vbus regulators unit names arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names arm64: dts: mt2712e: Fix unit address for pinctrl node arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators arm64: dts: mt6779: Fix devicetree build warnings arm64: dts: mt7896a: Fix unit_address_vs_reg warning for oscillator ... Link: https://lore.kernel.org/r/8933d687-71f0-e9ad-a7c6-2e5a8993463d@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21dt-bindings: arm: mediatek: mmsys: change compatible for MT8195Jason-JH.Lin1-1/+13
For previous MediaTek SoCs, such as MT8173, there are 2 display HW pipelines binding to 1 mmsys with the same power domain, the same clock driver and the same mediatek-drm driver. For MT8195, VDOSYS0 and VDOSYS1 are 2 display HW pipelines binding to 2 different power domains, different clock drivers and different mediatek-drm drivers. Moreover, Hardware pipeline of VDOSYS0 has these components: COLOR, CCORR, AAL, GAMMA, DITHER. They are related to the PQ (Picture Quality) and they makes VDOSYS0 supports PQ function while they are not including in VDOSYS1. Hardware pipeline of VDOSYS1 has the component ETHDR (HDR related component). It makes VDOSYS1 supports the HDR function while it's not including in VDOSYS0. To summarize0: Only VDOSYS0 can support PQ adjustment. Only VDOSYS1 can support HDR adjustment. Therefore, we need to separate these two different mmsys hardwares to 2 different compatibles for MT8195. Fixes: 81c5a41d10b9 ("dt-bindings: arm: mediatek: mmsys: add mt8195 SoC binding") Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220927152704.12018-2-jason-jh.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-11-21dt-bindings: arm: ti: Add bindings for BeagleBone AI-64Robert Nelson1-0/+1
This board is based on the ti,j721e https://beagleboard.org/ai-64 https://git.beagleboard.org/beagleboard/beaglebone-ai-64 Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Acked-by: Rob Herring <robh@kernel.org> CC: Nishanth Menon <nm@ti.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20221118163139.3592054-1-robertcnelson@gmail.com
2022-11-21Merge tag 'stm32-dt-for-v6.2-1' of ↵Arnd Bergmann1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.2, round 1 Highlights: ---------- - MPU: - ST boards: - Add MCP23017 IO expander support on stm32mp135f-dk board. - Add stm32g0 support for USB typeC on stm32mp135f-dk - Add USB (EHCI / OTG) on stm32mp135f-dk - Add ADC support on stm32mp135f-dk - Add USB2514B onboard hub on stm32mp157c-ev1 - DH: - Fix severals Yaml DT validation issues * tag 'stm32-dt-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (28 commits) ARM: dts: stm32: Rename mdio0 to mdio on DHCOR Testbench board ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk ARM: dts: stm32: add USB OTG HS support on stm32mp131 ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 ARM: dts: stm32: add PWR fixed regulators on stm32mp131 ARM: dts: stm32: Fix AV96 WLAN regulator gpio property ARM: dts: stm32: add adc support on stm32mp135f-dk ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk ARM: dts: stm32: add adc support to stm32mp13 ARM: dts: stm32: Drop MMCI interrupt-names ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1 ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1 ... Link: https://lore.kernel.org/r/3235e5be-d89f-f76c-5e25-5d1210feb857@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'imx-bindings-6.2' of ↵Arnd Bergmann1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX dt-bindings update for 6.2: - New vendor prefix for Cloos and InnoComm. - New compatible for Cloos PHG board, InnoComm WB15 EVK and Kobo Aura 2. - Improve snvs-lpgpr bindings schema regarding i.MX8M SNVS LPGRP compatible strings. - Improve fsl-imx-cspi bindings schema for i.MX8MP ECSPI. - Add bindings schema for i.MX8M ANATOP device. - Update SCU firmware resource ID header by syncing with the latest available SCFW kit version 1.13.0. * tag 'imx-bindings-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add an entry for Cloos PHG board dt-bindings: vendor-prefixes: Add an entry for Cloos dt-bindings: nvmem: snvs-lpgpr: Fix i.MX8M compatible strings dt-bindings: spi: fsl-imx-cspi: update i.MX8MP binding dt-bindings: arm: fsl: add compatible string for Kobo Aura 2 dt-bindings: clock: add i.MX8M Anatop dt-bindings: arm: fsl: Add InnoComm WB15 EVK dt-bindings: vendor-prefixes: Add prefix for InnoComm dt-bindings: firmware: imx: sync with SCFW kit v1.13.0 Link: https://lore.kernel.org/r/20221119125733.32719-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21dt-bindings: arm: mediatek: Add compatible for MT6795 Sony Xperia M5AngeloGioacchino Del Regno1-0/+1
Add a compatible for the Sony Xperia M5 smartphone. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221027095504.37432-6-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-11-21dt-bindings: amlogic: document Odroid Go Ultra compatibleNeil Armstrong1-0/+1
This documents the Odroid Go Ultra, a portable gaming device, with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221031-b4-odroid-go-ultra-initial-v2-1-a3df1e09b0af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-11-21dt-bindings: arm: uniphier: Add Pro5 boardsKunihiko Hayashi1-0/+6
Add compatible string for Pro5 EP-Core board and ProEX board support. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221117163219.3673-2-hayashi.kunihiko@socionext.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-20dt-bindings: arm: aspeed: document Delta AHE-50DC BMCZev Weiss1-0/+1
Document Delta AHE-50DC BMC board compatible. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221108001551.18175-2-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-11-15dt-bindings: arm: add xiaomi,sagit board based on msm8998 chipDzmitry Sankouski1-0/+1
Add xiaomi,sagit board (Xiaomi Mi 6) binding. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221112203300.536010-2-dsankouski@gmail.com
2022-11-15dt-bindings: rockchip: Add Rockchip rk3566 box demo boardAndy Yan1-0/+5
Add device tree binding for Rockchip rk3566 box demo board. Signed-off-by: Andy Yan <andyshrk@163.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221105095935.958144-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14Merge tag 'asahi-soc-dt-6.2' of https://github.com/AsahiLinux/linux into arm/dtArnd Bergmann1-1/+13
Apple SoC DT updates for 6.2. This includes new device trees for Apple M1 Pro/Max/Ultra SoCs and the devices that contain them, as well as some audio-related changes. * tag 'asahi-soc-dt-6.2' of https://github.com/AsahiLinux/linux: arm64: dts: apple: Add ADMAC resets on t8103/t600x dt-bindings: dma: apple,admac: Add reset arm64: dts: apple: t600x: Add MCA and its support arm64: dts: apple: t8103: Add MCA and its support arm64: dts: apple: t8103: Add AUDIO_P parent to the SIO_ADMA power domain arm64: dts: apple: Add J375 devicetrees arm64: dts: apple: Add J314 and J316 devicetrees arm64: dts: apple: Add initial t6000/t6001/t6002 DTs arm64: dts: apple: Fix j45x model years dt-bindings: arm: apple: Add t6001/t6002 Mac Studio compatibles dt-bindings: apple,aic2: Add CPU PMU per-cpu pseudo-interrupts dt-bindings: iommu: dart: add t6000 compatible Link: https://lore.kernel.org/r/dea10860-2870-3a9e-fa51-21e493b1573a@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14Merge tag 'dt-cleanup-6.2' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.2 1. Aspeed: fix qcom,dc-scm-v1-bmc compatible in the bindings. 2. Marvell: include bindings in maintainers entry. 3. Cleanup DTS according to bindings (panel endpoint unit address, incorrect spi-max-frequency, generic node names). 4. Few indentation fixes. * tag 'dt-cleanup-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: dt-bindings: arm: aspeed: adjust qcom,dc-scm-v1-bmc compatible after rename ARM: dts: sunxi: correct indentation ARM: dts: omap: correct indentation ARM: dts: kirkwood: correct indentation ARM: dts: armada: correct indentation ARM: dts: ti: correct indentation ARM: dts: aspeed: align SPI node name with dtschema MAINTAINERS: ARM: marvell: include bindings ARM: dts: sunplus: sp7021: drop incorrect spi-max-frequency ARM: dts: am335x: drop panel endpoint unit address Link: https://lore.kernel.org/r/20221110092111.18581-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14dt-bindings: arm: fsl: Add an entry for Cloos PHG boardFabio Estevam1-0/+1
Add an entry for the i.MX8MM Cloos PHG board. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11dt-bindings: arm: qcom: add sdm670 and pixel 3a compatibleRichard Acayan1-0/+6
The Snapdragon 670 and Pixel 3a initial device trees are about to be added. Add the compatible strings for the board. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221111001818.124901-3-mailingradian@gmail.com
2022-11-11dt-bindings: arm: cpus: add qcom kryo 360 compatibleRichard Acayan1-0/+1
The Snapdragon 670 uses CPUs named Kryo 360 silver and Kryo 360 gold. Add the compatible string in the documentation. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221111001818.124901-2-mailingradian@gmail.com
2022-11-11dt-bindings: arm64: dts: mediatek: add compatible for bananapi r3Frank Wunderlich1-0/+1
Add compatible for mt7986 based BananaPi R3 SBC. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221106085034.12582-9-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-11-11dt-bindings: net: mediatek: add WED RX binding for MT7986 eth driverLorenzo Bianconi1-0/+52
Document the binding for the RX Wireless Ethernet Dispatch core on the MT7986 ethernet driver used to offload traffic received by WLAN NIC and forwarded to LAN/WAN one. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-10dt-bindings: ARM: add bindings for the D-Link DIR-890LLinus Walleij1-0/+1
The DIR-890L is a router similar to DIR-885L just a bit different. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221107134104.1422169-1-linus.walleij@linaro.org Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-10dt-bindings: arm: aspeed: adjust qcom,dc-scm-v1-bmc compatible after renameKrzysztof Kozlowski1-1/+1
The Nuvia DC-SCM BMC board compatible was renamed in commit 7f058112873e ("ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom"), so adjust the bindings as well. Fixes: f77024c80147 ("dt-bindings: arm: aspeed: document board compatibles") Acked-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220811062953.5976-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-11-10dt-bindings: arm: imx: Add i.MXRT compatible DocumentationJesse Taube1-0/+12
Recently the imxrt1050 was added but the cpu compatible node wasn't added. Add both i.MXRT1170 and 1050 compatibles to fsl.yaml. Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221107071511.2764628-2-Mr.Bossman075@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-09dt-bindings: ARM: add bindings for the D-Link DWL-8610APLinus Walleij1-0/+1
The D-Link DWL-8610AP is a pure access point with ethernet in and wireless (both 2.4GHz and 5GHz) out. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221019193449.3036010-1-linus.walleij@linaro.org Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-11-07dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IVKonrad Dybcio1-0/+6
Add compatibles for Sony Xperia 10 IV (PDX225) and the SM6375 SoC it's based on. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107120920.12593-2-konrad.dybcio@linaro.org
2022-11-07dt-bindings: arm: cpus: Add Kryo 660 CPUsKonrad Dybcio1-0/+1
Add a compatible for Kryo 660 CPUs found in at least Qualcomm SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107120920.12593-1-konrad.dybcio@linaro.org
generated by cgit v1.2.3 (git 2.46.0) at 2026-01-14 21:18:42 +0000