Age | Commit message (Collapse) | Author | Files | Lines |
|
Add a device tree for the Xperia 5 IV (pdx224). It's literally the 1 IV
with a smaller body, different panel, one camera lens (not sensor afaict)
swapped out and no 3D iToF sensor, hence the device-specific DT is tiny.
Be sure to follow the vbmeta disablement steps (detailed in pdx223
introduction commit message), otherwise your phone will not boot and
will reject anything and everything with just a non-descriptive
"Your device is corrupted" followed by a sad reboot. This should not
be the case, as vbmeta should be plainly ignored in unlocked state,
but what can we do..
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114095654.34561-3-konrad.dybcio@linaro.org
|
|
Turns out 1 IV is not the only Nagara device, reflect that in the DTS.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114095654.34561-2-konrad.dybcio@linaro.org
|
|
Add coresight components for sm8250. STM/ETM are added.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114091251.13939-1-quic_jinlmao@quicinc.com
|
|
New device support - Xiaomi Mi6 phone
What works:
- storage
- usb
- power regulators
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konra.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221112203300.536010-3-dsankouski@gmail.com
|
|
This adds support for the Sony Xperia Loire/SmartLoire platform
with a base configuration that is common across all of the
devices that are based on this project.
Also adds a base DT configuration for the Xperia X and Xperia
X Compact (respectively, Suzu and Kugo) which is valid for both
their RoW (single-sim), DSDS (dual-sim) and other regional
variants of these two smartphones, that makes us able to boot
to a UART console.
Please note that, currently, the APC0/1 (cluster 0/1) vregs
are set to a safe voltage in order to ensure boot stability
until a proper solution for CPU DVFS scaling lands.
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-12-angelogioacchino.delregno@collabora.com
|
|
This commit adds device trees for MSM8956 and MSM8976 SoCs.
They are *almost* identical, with minor differences, such as
MSM8956 having two A72 cores less.
However, there is a bug in Sony Loire bootloader that requires presence
of all 8 cores in the cpu{} node, so these will not be deleted.
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-11-angelogioacchino.delregno@collabora.com
|
|
The PMI8950 features integrated peripherals like ADC, GPIO controller,
MPPs and others.
[luca@z3ntu.xyz: remove pm8950, style changes for 2022 standards, add wled]
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221101161801.1058969-2-luca@z3ntu.xyz
|
|
The PM8950 features integrated peripherals like ADC, GPIO controller,
MPPs, PON keys and others.
Add them to DT files that will be imported on boards having this PMIC
combo (or one of them, anyways).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-10-angelogioacchino.delregno@collabora.com
|
|
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes: 5aa0d1becd5b ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-3-johan+linaro@kernel.org
|
|
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes")
Cc: stable@vger.kernel.org # 5.16
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-2-johan+linaro@kernel.org
|
|
The source clock for the reference clock should not be described by the
devicetree binding and instead this relationship should be modelled in
the clock driver.
Update the USB PHY nodes to match the fixed binding.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111093857.11360-4-johan+linaro@kernel.org
|
|
Add the two bwmon instances and define votes for CPU -> LLCC and LLCC ->
DDR, with bandwidth values based on the downstream DeviceTree.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111032515.3460-11-quic_bjorande@quicinc.com
|
|
Add the L3 interconnect path to all CPUs and define the bandwidth
requirements for all opp entries across sc8280xp and sa8540p.
The values are based on the tables reported by the hardware, distributed
such that each value is the largest value, lower than the cluster
frequency.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111032515.3460-9-quic_bjorande@quicinc.com
|
|
Add a device node for the EPSS L3 frequency domain.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111032515.3460-8-quic_bjorande@quicinc.com
|
|
Update all references to OSM or EPSS L3 compatibles, to include the
generic compatible, as defined by the updated binding.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111032515.3460-7-quic_bjorande@quicinc.com
|
|
Update the UFS PHY nodes to match the new binding.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104092045.17410-3-johan+linaro@kernel.org
|
|
This is not a fix on its own but more a cleanup. Phy qmp pcie driver
currently have a workaround to handle pcs_misc not declared and add
0x400 offset to the pcs reg if pcs_misc is not declared.
Correctly declare pcs_misc reg and reduce PCS size to the common value
of 0x1f0 as done for every other qmp based pcie phy device.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221103212125.17156-2-ansuelsmth@gmail.com
|
|
These devicetrees override a rt5682 node to use the rt5682s compatible,
however, unlike rt5682, rt5682s doesn't have a VBAT supply. Remove the
inexistent supply in the rt5682s nodes.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102182002.255282-9-nfraprado@collabora.com
|
|
The DBVDD and LDO1-IN supplies for rt5682 are required but are missing.
They are supplied by the same power rail as AVDD. Add them.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102182002.255282-8-nfraprado@collabora.com
|
|
The first PM8540 PMIC has an available RTC block, describe this in the
SA8295P ADP. Mark it as wakeup-source to allow waking the system from
sleep.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221205174309.16733-1-quic_bjorande@quicinc.com
|
|
There are three UFS reference clocks on SC8280XP which are used as
follows:
- The GCC_UFS_REF_CLKREF_CLK clock is fed to any UFS device connected
to either controller.
- The GCC_UFS_1_CARD_CLKREF_CLK and GCC_UFS_CARD_CLKREF_CLK clocks
provide reference clocks to the two PHYs.
Note that this depends on first updating the clock driver to reflect
that all three clocks are sourced from CXO. Specifically, the UFS
controller driver expects the device reference clock to have a valid
frequency:
ufshcd-qcom 1d84000.ufs: invalid ref_clk setting = 0
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Fixes: 8d6b458ce6e9 ("arm64: dts: qcom: sc8280xp: fix ufs_card_phy ref clock")
Fixes: f3aa975e230e ("arm64: dts: qcom: sc8280xp: correct ref clock for ufs_mem_phy")
Link: https://lore.kernel.org/lkml/Y2OEjNAPXg5BfOxH@hovoldconsulting.com/
Cc: stable@vger.kernel.org # 5.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104092045.17410-2-johan+linaro@kernel.org
|
|
The devices on the SC8280XP PCIe buses are cache coherent and must be
marked as such to avoid data corruption.
A coherent device can, for example, end up snooping stale data from the
caches instead of using data written by the CPU through the
non-cacheable mapping which is used for consistent DMA buffers for
non-coherent devices.
Note that this is much more likely to happen since commit c44094eee32f
("arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()")
that was added in 6.1 and which removed the cache invalidation when
setting up the non-cacheable mapping.
Marking the PCIe devices as coherent specifically fixes the intermittent
NVMe probe failures observed on the Thinkpad X13s, which was due to
corruption of the submission and completion queues. This was typically
observed as corruption of the admin submission queue (with well-formed
completion):
could not locate request for tag 0x0
nvme nvme0: invalid id 0 completed on queue 0
or corruption of the admin or I/O completion queues (malformed
completion):
could not locate request for tag 0x45f
nvme nvme0: invalid id 25695 completed on queue 25965
presumably as these queues are small enough to not be allocated using
CMA which in turn make them more likely to be cached (e.g. due to
accesses to nearby pages through the cacheable linear map). Increasing
the buffer sizes to two pages to force CMA allocation also appears to
make the problem go away.
Fixes: 813e83157001 ("arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221124142501.29314-1-johan+linaro@kernel.org
|
|
Mergeback arm64-fixes-for-6.1 to avoid merge conflicts.
|
|
The DMA properties in this DT are identical to the ones already
defined in sdm845.dtsi. Remove them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114140011.43442-1-konrad.dybcio@linaro.org
|
|
Wire up necessary supplies to USB PHYs to enable USB3 on Sagami and
remove all the limit-to-USB2 properties.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114143642.44839-2-konrad.dybcio@linaro.org
|
|
Configure most RPMh-controlled regulators on SoMC Sagami. The missing
ones (on pm8350b and pm8008[ij]) will be configured when driver support
is added. Thankfully, it looks like PDX215 and PDX214 don't have any
differences when it comes to PM8350/PM8350C/PMR735a.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114143642.44839-1-konrad.dybcio@linaro.org
|
|
The 1-mic and 3-mic dtsi still had two minor cosmetic differences
after commit '3d11e7e120ee ("arm64: dts: qcom: sc7280: sort out the
"Status" to last property with
sc7280-herobrine-audio-rt5682.dtsi")'. Let's fix them so the two files
diff better. This is expected to have no effect though it will
slightly change the generated dtb by removing an unnecessary 'status =
"okay"' from the sound node.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114162807.1.I0900b97128f9bb03e5f96fcb3068c227a33f143a@changeid
|
|
Hex numbers in addresses and sizes should be rather eight digits, not
nine. Drop leading zeros. No functional change (same DTB).
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115105046.95254-1-krzysztof.kozlowski@linaro.org
|
|
PCIe on MSM8996 and MSM8998 use the same clocks, so use one order to
make the binding simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115125310.184012-4-krzysztof.kozlowski@linaro.org
|
|
Add new compatible for MSM8998 (compatible with MSM8996) to allow
further customizing if needed and to accurately describe the hardware.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115125310.184012-3-krzysztof.kozlowski@linaro.org
|
|
Enable the Qualcomm QCNFA765 Wireless Network Adapter connected to
PCIe4.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-10-johan+linaro@kernel.org
|
|
Enable the modem connected to the PCIe3a M.2 connector.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-9-johan+linaro@kernel.org
|
|
Enable the NVMe SSD connected to PCIe2.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-8-johan+linaro@kernel.org
|
|
Enable the Qualcomm QCNFA765 Wireless Network Adapter connected to
PCIe4.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-7-johan+linaro@kernel.org
|
|
Enable the SDX55 modem connected to PCIe3.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-6-johan+linaro@kernel.org
|
|
Enable the NVMe SSD connected to PCIe2.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-5-johan+linaro@kernel.org
|
|
Rename the backlight and misc regulators according to the net names.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-4-johan+linaro@kernel.org
|
|
The SA8295P-ADP has up to four PCIe interfaces implemented by three or
four controllers: PCIe2A, PCIe3A/PCIe3B and PCIe4.
PCIe2 is used in x4 mode, while PCIe3 can be used in either x2 or x4
mode. Enable both PCIe3A and PCI3B in x2 mode for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-3-johan+linaro@kernel.org
|
|
The SC8280XP platform has seven PCIe controllers:
PCIe0 USB4
PCIe1 USB4
PCIe2A 4-lane
PCIe2B 2-lane
PCIe3A 4-lane
PCIe3B 2-lane
PCIe4 1-lane
while SA8540P only has five (PCIe2-4).
Add devicetree nodes for the PCIe2-4 controllers and their PHYs.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110103558.12690-2-johan+linaro@kernel.org
|
|
The Qualcomm Snapdragon 670 has been out for a while. Add a device tree
for it and the Google Pixel 3a as the first device.
The Pixel 3a has the same bootloader issue as the Pixel 3 and will not work
on Android 10 bootloaders or later until it gets fixed for the Pixel 3.
SoC Initial Features:
- power management
- clocks
- pinctrl
- eMMC
- USB 2.0
- GENI I2C
- IOMMU
- RPMh
- interrupts
Device-Specific Initial Features:
- side buttons (keys)
- regulators
- touchscreen
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111001818.124901-5-mailingradian@gmail.com
|
|
The Google Herobrine WIFI SKU can save 256M by not having modem/mba/rmtfs
memory regions defined. Add the dts fragment and mark all the board files
appropriately.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110070813.1777-2-quic_sibis@quicinc.com
|
|
When the modem node was re-located to a separate LTE source file
"sc7280-herobrine-lte-sku.dtsi", some of the previous LTE users
weren't marked appropriately. Fix this by marking all Qualcomm
reference devices as LTE.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Fixes: d42fae738f3a ("arm64: dts: qcom: Add LTE SKUs for sc7280-villager family")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110070813.1777-1-quic_sibis@quicinc.com
|
|
Fairphone 4 uses sdhc_2 for the SD card, configure the pins for it and
enable it.
The regulators which are exclusively used for SDHCI have their maximum
voltage decreased to what downstream sets on the consumer side, like on
many other platforms and allowed to set the load.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110151507.53650-1-luca.weiss@fairphone.com
|
|
spi-max-frequency is a property of SPI device, not the controller:
qcom/sm8450-hdk.dtb: geniqup@8c0000: spi@880000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221110152741.542024-1-krzysztof.kozlowski@linaro.org
|
|
Add gpio-keys for exposing the LID switch state.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220730193617.1688563-1-bjorn.andersson@linaro.org
|
|
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108142357.67202-2-krzysztof.kozlowski@linaro.org
|
|
Remove redundant and undocumented property qcom,port-offset in
soundwire controller nodes.
This patch is required to avoid dtbs_check errors with
qcom,soundwire.yaml
Fixes: 12ef689f09ab ("arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1667918763-32445-4-git-send-email-quic_srivasam@quicinc.com
|
|
Remove redundant and undocumented property qcom,port-offset in
soundwire controller nodes.
This patch is required to avoid dtbs_check errors with
qcom,soundwire.yaml
Fixes: 24f52ef0c4bf ("arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire masters")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1667918763-32445-3-git-send-email-quic_srivasam@quicinc.com
|
|
Update soundwire secondary nodes of WSA speaker to match with
dt-bindings pattern properties regular expression.
This modification is required to avoid dtbs-check errors
occurred with qcom,soundwire.yaml.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1667918763-32445-2-git-send-email-quic_srivasam@quicinc.com
|
|
In "sc7280-idp.dts", the IPA node is modified after being defined.
However that file includes "sc7280-idp.dtsi", which also modifies
the IPA node (in the same way). This only needs to be done in
"sc7280-idp.dtsi".
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108201625.1220919-1-elder@linaro.org
|