summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-05-29ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORMWill Deacon7-6/+1
When targetting ARCH_MULTIPLATFORM, we may include support for SoCs with PCI-capable devices (e.g. mach-virt with virtio-pci). This patch allows PCI support to be selected for these SoCs by selecting CONFIG_MIGHT_HAVE_PCI when CONFIG_ARCH_MULTIPLATFORM=y and removes the individual selections from multi-platform enabled SoCs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29Merge tag 'samsung-cleanup' of ↵Olof Johansson21-322/+219
http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup Merge "Samsung cleanup for v3.16" from Kukjin Kim: - use a common macro v7_exit_coherency_flush macro instead of local function - cleanup mach-exynos/Makefile and remove inclusion plat/cpu.h in mach-exynos - migrate exynos macros from plat-samsung to mach-exynos - cleanup s3c24xx debug macro/earlyprintk to remove arch dependency - fixed compilation error for cpufreq due to moving header in this branch : use of_machine_is_compatible() instead of soc_is_exynos...() Note that based on tags/samsung-clk and tags/samsung-fixes. * tag 'samsung-cleanup' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: cpufreq: exynos: Fix the compile error ARM: S3C24XX: move debug-macro.S into the common space ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro ARM: S3C24XX: trim down debug uart handling ARM: compressed/head.S: remove s3c24xx special case ARM: EXYNOS: Remove unnecessary inclusion of cpu.h ARM: EXYNOS: Migrate Exynos specific macros from plat to mach ARM: EXYNOS: Remove exynos_subsys registration ARM: EXYNOS: Remove duplicate lines in Makefile ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling ARM: dts: Remove g2d_pd node for exynos5420 ARM: dts: Remove mau_pd node for exynos5420 ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount ARM: dts: disable MDMA1 node for exynos5420 ARM: EXYNOS: fix the secondary CPU boot of exynos4212 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-26clk: samsung: fix build errorOlof Johansson1-1/+1
"clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata" had a typo in it which caused build failure. Trivial fix. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-26Merge tag 'omap-for-v3.16/prcm-signed' of ↵Olof Johansson56-242/+243
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Merge "ARM: omap prcm changes for v3.16 merge window" from Tony Lindgren: PRCM changes for omaps. I ended up merging these with the big endian changes because of the merge conflicts for read and write operations. Via Paul Walmsley <paul@pwsan.com>: Some OMAP PRCM cleanup patches. These help prepare to convert the PRCM code into drivers. Basic build, boot, and PM test results are available here: http://www.pwsan.com/omap/testlogs/prcm-cleanup-v3.16/20140515213244/ * tag 'omap-for-v3.16/prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit ARM: OMAP2+: PRCM: cleanup some header includes ARM: OMAP4: CM: use cm_base* in register address calculations ARM: OMAP2/3: CM: remove some external dependencies ARM: OMAP2+: prcm: add omap_test_timeout to prcm-common.h ARM: OMAP3: CM: remove a few OMAP34XX_CM_REGADDR defines ARM: OMAP: debug-leds: raw read and write endian fix ARM: OMAP: counter-32k: raw read and write endian fix ARM: OMAP: dmtimer: raw read and write endian fix ARM: OMAP2+: raw read and write endian fix Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-26ARM: vexpress: refine dependencies for new codeArnd Bergmann5-3/+6
The versatile express changes for 3.16 introduced a number of build regressions for randconfig kernels by not tracking dependencies between the components right. This patch tries to rectify that: * the mach-vexpress code cannot link without the syscfg driver, which in turn needs MFD_VEXPRESS_SYSREG * various drivers call devm_regmap_init_vexpress_config(), which has to be exported so it can be used by loadable modules * the configuration bus uses OF DT helper functions that are not available to platforms disable CONFIG_OF * The sysreg driver exports GPIOs through gpiolib, which can be disabled on some platforms. * The clocksource code cannot be built on platforms that don't use modern timekeeping but rely on gettimeoffset. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-26clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdataHeiko Stübner1-10/+10
The originally used PNAME macro from the core samsung clock infrastructure declares the created array as initdata, creating section mismatch warnings in the dclk driver. Thus declare them directly, removing these warning. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-26cpufreq: exynos: Fix the compile errorJonghwan Choi3-12/+26
Commit 7da83a80 ("ARM: EXYNOS: Migrate Exynos specific macros from plat to mach") which lands in samsung tree causes build breakage for cpufreq-exynos like following: drivers/cpufreq/exynos-cpufreq.c: In function 'exynos_cpufreq_probe': drivers/cpufreq/exynos-cpufreq.c:166:2: error: implicit declaration of function 'soc_is_exynos4210' [-Werror=implicit-function-declaration] drivers/cpufreq/exynos-cpufreq.c:168:2: error: implicit declaration of function 'soc_is_exynos4212' [-Werror=implicit-function-declaration] drivers/cpufreq/exynos-cpufreq.c:168:2: error: implicit declaration of function 'soc_is_exynos4412' [-Werror=implicit-function-declaration] drivers/cpufreq/exynos-cpufreq.c:170:2: error: implicit declaration of function 'soc_is_exynos5250' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [drivers/cpufreq/exynos-cpufreq.o] Error 1 make[2]: *** Waiting for unfinished jobs.... drivers/cpufreq/exynos4x12-cpufreq.c: In function 'exynos4x12_set_clkdiv': drivers/cpufreq/exynos4x12-cpufreq.c:118:2: error: implicit declaration of function 'soc_is_exynos4212' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [drivers/cpufreq/exynos4x12-cpufreq.o] Error 1 make[1]: *** [drivers/cpufreq] Error 2 This fixes above error with getting SoC information via of_machine_is_compatible() instead of soc_is_exynosXXXX(). Suggested-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> [kgene.kim@samsung.com: fixed typo and modified as per Viresh's suggestion] [kgene.kim@samsung.com: Rafael agreed] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26ARM: S3C24XX: move debug-macro.S into the common spaceHeiko Stuebner2-0/+1
Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macroHeiko Stuebner2-9/+23
This removes the need for mach/-headers in the debug macro. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26ARM: S3C24XX: trim down debug uart handlingHeiko Stuebner3-79/+31
Using the lowlevel debug uart is a corner case - even more so in a multiplatform environment. So it seems reasonable to simply let the developer set the appropriate uart type for the debugged SoC. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26ARM: compressed/head.S: remove s3c24xx special caseHeiko Stuebner1-5/+0
addruart from the generic debug macro is doing exactly the same using the common lowlevel uart definition, so there is no cause for this special casing for s3c24xx. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26ARM: EXYNOS: Remove unnecessary inclusion of cpu.hSachin Kamat7-12/+1
Exynos specific macros and declarations have been moved to mach-exynos. Inclusion of plat/cpu.h is no more necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26ARM: EXYNOS: Migrate Exynos specific macros from plat to machSachin Kamat2-60/+72
Move Exynos specific macros to mach-exynos from plat-samsung to avoid unnecessary dependency on plat based header files. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26ARM: EXYNOS: Remove exynos_subsys registrationSachin Kamat2-12/+0
'exynos_subsys' has no users. Remove this code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26ARM: EXYNOS: Remove duplicate lines in MakefileSachin Kamat1-6/+1
Group all files compiled under common config option together. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disablingLeela Krishna Amudala1-62/+1
A common macro v7_exit_coherency_flush available which does the below tasks in the seqeunce. -clearing C bit -clearing L1 cache -exit SMP -instruction and data synchronization So removing the local functions which does the same thing and use the macro instead. Signed-off-by: Leela Krishna Amudala <leela.krishna@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> [cw00.choi@samsung.com: tested on exynos3250 based board] Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-26Merge branch 'v3.16-next/clk-s3c24xx-3' into v3.16-next/cleanup-samsungKukjin Kim61-3223/+2655
2014-05-24Merge tag 'for-3.16/bcm-cleanup' of git://github.com/broadcom/mach-bcm into ↵Arnd Bergmann9-149/+170
next/cleanup * Clean up mach-bcm config and build targets * Clean up bcm281xx/21664 SMC code * Clean up bcm281xx/21664 L2C code * tag 'for-3.16/bcm-cleanup' of git://github.com/broadcom/mach-bcm: ARM: bcm: rename "kona.h" and "kona.c" ARM: bcm: rewrite commentary for bcm_kona_do_smc() ARM: bcm: use inline assembly for "smc" request ARM: bcm: tidy up a few includes ARM: bcm: config option for l2 cache support ARM: bcm: don't special-case CPU 0 in bcm_kona_smc() ARM: bcm: have bcm_kona_smc() return request result ARM: bcm: clean up SMC code ARM: bcm: err, don't BUG() on SMC init failures ARM: bcm: use memory accessors for ioremapped area ARM: bcm: clean up config and build targets Signed-off-by: Arnd Bergmann <arnd@arndb.de> Conflicts: arch/arm/mach-bcm/Kconfig
2014-05-21Merge tag 's3c24xx-clk' of ↵Olof Johansson61-3223/+2655
http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup Merge "Samsung S3C24XX updates for 3.16" from Kukjin Kim: Samsung S3C24XX to use the common clock framework - S3C2412, S3C2413, S3C2416 and S3C2443 to use CCF - S3C2410, S3C2440, S3C2442 to use CCF - Remove legacy samsung clock from mach-s3c24xx/ - Some of them are missed from previous pull-request - Clock related sutff got ack from Mike and Tomasz - Created the last commit due to missing changes during re-sorting because this branch is provided as a base to samsung clk tree. * tag 's3c24xx-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (23 commits) ARM: S3C24XX: fix merge conflict ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion ARM: S3C24XX: remove legacy clock code ARM: S3C24XX: convert s3c2410 to common clock framework ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock framework ARM: S3C24XX: add platform code for conversion to the common clock framework clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442 dt-bindings: add documentation for s3c2410 clock controller ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled clk: samsung: add clock driver for external clock outputs ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf ARM: S3C24XX: convert s3c2412 to common clock framework clk: samsung: add clock controller driver for s3c2412 dt-bindings: add documentation for s3c2412 clock controller clk: samsung: add plls used by the early s3c24xx cpus ARM: S3C24XX: only store clock registers when old clock code is active ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework ARM: dts: add clock data for s3c2416 ARM: S3C24XX: prevent conflicts between ccf and non-ccf s3c24xx-socs clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-21Merge tag 'vexpress/updates-for-3.16' of ↵Olof Johansson515-4422/+6397
git://git.linaro.org/people/pawel.moll/linux into next/cleanup Merge "ARM Versatile Express updates for 3.16" from Pawel Moll: This series reworks VE's platform configuration infrastructure by: - making it possible to instantiate selected devices from the Device Tree, prior to massive population, - converting custom "func" API into standard "regmap", - splitting the existing MFD driver into smaller ones and placing them into relevant directories. The common clock framework driver can now be selected individually (mostly for arm64 sake, where some of them are not used at all). It also simplifies the machine code, by: - moving the shed clock info clocksource driver, - simplifying SMP operations to base them entirely of the DT data, - moving platform ID checks into relevant driver. * tag 'vexpress/updates-for-3.16' of git://git.linaro.org/people/pawel.moll/linux: ARM: vexpress: move HBI check to sysreg driver ARM: vexpress: Simplify SMP operations for DT-powered system ARM: vexpress: remove redundant vexpress_dt_cpus_num to get cpu count clocksource: Sched clock source for Versatile Express clk: versatile: Split config options for sp810 and vexpress_osc mfd: vexpress: Define the device as MFD cells mfd: syscon: Add platform data with a regmap config name mfd: vexpress: Convert custom func API to regmap of: Keep track of populated platform devices + Linux 3.15-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-19Merge tag 'sirf-soc-for-3.16' of ↵Olof Johansson255-1479/+2368
git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/cleanup Merge "ARM: sirf: machine update for 3.16" from Barry Song: Most of them fix some minor checkpatch issues according to key customers' requirement. And this patchset also cleanups the clk of clocksource: move to get clk by dts properity. * tag 'sirf-soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: clocksource:sirf: remove the hardcode for the clk of timers irqchip: sirf: fix one minor checkpatch issue clocksource: prima2: fix some minor checkpatch issues ARM: prima2: rstc: fix some minor checkpatch issues + Linux 3.15-rc3 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-16Merge tag 'for-v3.16/prcm-cleanup-a' of ↵Tony Lindgren21-94/+95
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.16/prcm Some OMAP PRCM cleanup patches. These help prepare to convert the PRCM code into drivers. Basic build, boot, and PM test results are available here: http://www.pwsan.com/omap/testlogs/prcm-cleanup-v3.16/20140515213244/ Conflicts: arch/arm/mach-omap2/cm3xxx.c arch/arm/mach-omap2/cm44xx.c Also fixed up new section mismatch warnings.
2014-05-15ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core filesTero Kristo3-3/+7
Done in preparation to make PRCM a standalone driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_opsTero Kristo4-8/+16
SoC specific late_init call is now registered during PRM init, and will be called automatically by PRM core. This helps to get rid of some redundant initcalls and cpu_is_X checks from the PRM code. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under itTero Kristo4-1/+23
prm_features flag will contain SoC specific feature enabler flags. Initially IO wakeup is added under this. Helps to get rid of runtime cpu_is_X checks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setupTero Kristo4-6/+5
This helps to make the PRM registration modular, and also gets rid of a cpu type check done later. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exitTero Kristo3-30/+3
Done in preparation to make PRM its own driver, as the cpu_is_XXX calls are not available outside mach-omap2 folder. The init functions are called only from cpu specific init chain, and thus don't need to double check against cpu type. The exit calls check against the data provided during init-time registration and thus don't need cpu check either. Signed-off-by: Tero Kristo <t-kristo@ti.com> [paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP2+: PRCM: cleanup some header includesTero Kristo12-14/+8
Some of the includes are totally unnecessary, remove some others in preparation to make the PRCM its own driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> [paul@pwsan.com: updated to apply; fixed build error on OMAP2xxx-only configs] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP4: CM: use cm_base* in register address calculationsTero Kristo1-4/+4
OMAP44XX_CM*_REGADDR macros should be avoided, instead use the cm_base* iomaps. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP2/3: CM: remove some external dependenciesTero Kristo2-25/+3
Done in preparation to move the CM driver to its own driver folder. These drivers will not have access to functionality under mach-omap2 anymore. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: OMAP2+: prcm: add omap_test_timeout to prcm-common.hTero Kristo1-0/+20
Done in preparation to move cm/prm to drivers. These will still use omap_test_timeout, but will not have access to common.h header under mach-omap2 anymore. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15ARM: vexpress: move HBI check to sysreg driverPawel Moll3-69/+11
The last reason for static memory mapping is the HBI (board identification number) check early in the machine code. Moving the check to the sysreg driver makes it possible to completely remove the early mapping and init functions. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15ARM: vexpress: Simplify SMP operations for DT-powered systemPawel Moll3-126/+41
As all cores must be properly described in the Device Tree, there is no point in getting their numbers from SCU on A5/A9 platforms. This significantly simplifies the code, removing the need for flat-tree scanning and early static mapping. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-05-15ARM: vexpress: remove redundant vexpress_dt_cpus_num to get cpu countSudeep KarkadaNagesha1-30/+1
arm_dt_init_cpu_maps parses the device tree, validates and sets the cpu_possible_mask appropriately. It is unnecessary to do another DT parse to get the number of cpus, use num_possible_cpus instead. This patch also removes setting cpu_present_mask as platforms should only re-initialize it in smp_prepare_cpus() if present != possible. Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-05-15clocksource: Sched clock source for Versatile ExpressPawel Moll4-2/+52
This patch adds a trival sched clock source using free running, 24MHz clocked counter present in the ARM Ltd. reference platforms (Versatile, RealView, Versatile Express) System Registers block. This code replaces the call in the VE machine code. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-15clk: versatile: Split config options for sp810 and vexpress_oscPawel Moll3-10/+30
Move the Kconfig entry for Versatile (& Express) clock drivers into a separate file and add individual options for sp810 and vexpress_osc drivers, as they are optional in some configurations and may have separate dependencies. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2014-05-15mfd: vexpress: Define the device as MFD cellsPawel Moll12-438/+667
This patch - finally, after over 6 months! :-( - addresses Samuel's request to split the vexpress-sysreg driver into smaller portions and define the device in a form of MFD cells: * LEDs code has been completely removed and replaced with "gpio-leds" nodes in the tree (referencing dedicated GPIO subnodes in sysreg - bindings documentation updated); this also better fits the reality as some variants of the motherboard don't have all the LEDs populated * syscfg bridge code has been extracted into a separate driver (placed in drivers/misc for no better place) * all the ID & MISC registers are defined as sysconf making them available for other drivers should they need to use them (and also to the user via /sys/kernel/debug/regmap which can be helpful in platform debugging) Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15mfd: syscon: Add platform data with a regmap config namePawel Moll2-0/+12
Define syscon platform data structure that can be used to define a regmap config name. This is particularly useful in the regmap debugfs when there is more than one syscon device registered, to distinguish the register blocks. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15mfd: vexpress: Convert custom func API to regmapPawel Moll17-680/+568
Components of the Versatile Express platform (configuration microcontrollers on motherboard and daughterboards in particular) talk to each other over a custom configuration bus. They provide miscellaneous functions (from clock generator control to energy sensors) which are represented as platform devices (and Device Tree nodes). The transactions on the bus can be generated by different "bridges" in the system, some of which are universal for the whole platform (for the price of high transfer latencies), others restricted to a subsystem (but much faster). Until now drivers for such functions were using custom "func" API, which is being replaced in this patch by regmap calls. This required: * a rework (and move to drivers/bus directory, as suggested by Samuel and Arnd) of the config bus core, which is much simpler now and uses device model infrastructure (class) to keep track of the bridges; non-DT case (soon to be retired anyway) is simply covered by a special device registration function * the new config-bus driver also takes over device population, so there is no need for special matching table for of_platform_populate nor "simple-bus" hack in the arm64 model dtsi file (relevant bindings documentation has been updated); this allows all the vexpress devices fit into normal device model, making it possible to remove plenty of early inits and other hacks in the near future * adaptation of the syscfg bridge implementation in the sysreg driver, again making it much simpler; there is a special case of the "energy" function spanning two registers, where they should be both defined in the tree now, but backward compatibility is maintained in the code * modification of the relevant drivers: * hwmon - just a straight-forward API change * power/reset driver - API change * regulator - API change plus error handling simplification * osc clock driver - this one required larger rework in order to turn in into a standard platform driver Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mike Turquette <mturquette@linaro.org>
2014-05-15of: Keep track of populated platform devicesPawel Moll3-5/+81
In "Device Tree powered" systems, platform devices are usually massively populated with of_platform_populate() call, executed at some level of initcalls, either by generic architecture or by platform-specific code. There are situations though where certain devices must be created (and bound with drivers) before all the others. This presents a challenge, as devices created explicitly would be created again by of_platform_populate(). This patch tries to solve that issue in a generic way, adding a "populated" flag for a DT node description. Subsequent of_platform_populate() will skip such nodes (and its children) in a similar way to the non-available ones. This patch also adds of_platform_depopulate() as an operation complementary to the _populate() one. It removes a platform or an amba device populated from the Device Tree, together with its all children (leaving, however, devices without associated of_node untouched) clearing the "populated" flag on the way. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Grant Likely <grant.likely@linaro.org>
2014-05-15ARM: S3C24XX: fix merge conflictKukjin Kim1-2/+0
Missed some changes during re-sorting this branch. So fixed it. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-15ARM: dts: Remove g2d_pd node for exynos5420Arun Kumar K1-6/+0
G2D power domain also controls the CMU block of G2D. Since clock registers can be accessed anytime for viewing clk_summary, it can cause a system crash if g2d power domain is disabled. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-15ARM: dts: Remove mau_pd node for exynos5420Tushar Behera1-5/+0
MAU powerdomain provides clocks for Audio sub-system block. This block comprises of the I2S audio controller, audio DMA blocks and Audio sub-system clock registers. Right now, there is no way to hook up power-domains with clock providers. During late boot when this power-domain gets disabled, we get following external abort. Unhandled fault: imprecise external abort (0x1406) at 0x00000000 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-15ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mountSachin Kamat1-0/+1
High speed I2C is used on Exynos5 based SoCs. Enable it. The MMC partition for Root filesystem cannot be mounted without this enabling HS-I2C and regulators on many boards are connected HS-I2C bus so the regulators don't come by default without this. Actually, we are not able to get arndale-octa board to boot and mount an MMC partition without this change. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Tested-by: Javi Merino <javi.merino@arm.com> [kgene.kim@samsung.com: modified description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-15ARM: dts: disable MDMA1 node for exynos5420Seungwon Jeon2-12/+7
This change places MDMA1 in disabled node for Exynos5420. If MDMA1 region is configured with secure mode, it makes the boot failure with the following on smdk5420 board. ("Unhandled fault: imprecise external abort (0x1406) at 0x00000000") Thus, arndale-octa board don't need to do the same thing anymore. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-15ARM: EXYNOS: fix the secondary CPU boot of exynos4212Kyungmin Park1-1/+14
This patch fixes the offset of CPU boot address and changes the parameter of smc call for SMC_CMD_CPU1BOOT command on exynos4212. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-13ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversionHeiko Stuebner9-160/+0
This finally removes all remaining SAMSUNG_CLOCK conditional code from s3c24xx architectures. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-13ARM: S3C24XX: remove legacy clock codeHeiko Stuebner13-1122/+0
With the move to the common clock framework completed for s3c2410, s3c2440 and s3c2442, the legacy clock code for these machines can go away too. This also includes the legacy dclk code, as all legacy users are converted. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-13ARM: S3C24XX: convert s3c2410 to common clock frameworkHeiko Stuebner12-34/+67
Convert the machines using the s3c2410 to use the new driver based on the common clock framework instead of the legacy Samsung clock driver. As with the s3c244x, machines using the clkout output will need a fixup from someone with the hardware. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-13ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock frameworkHeiko Stuebner12-36/+73
Convert all machines using these cpus to use the ccf clock driver instead of the legacy Samsung clock implementation. Some of the more esotheric machines will probably need a fixup, as they do strange things to the clkout outputs, that I did not really understand nor have the hardware to check. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 03:05:31 +0000