Merge tag 'samsung-cleanup' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

Merge "Samsung cleanup for v3.16" from Kukjin Kim:

- use a common macro v7_exit_coherency_flush macro instead of local function
- cleanup mach-exynos/Makefile and remove inclusion plat/cpu.h in mach-exynos
- migrate exynos macros from plat-samsung to mach-exynos
- cleanup s3c24xx debug macro/earlyprintk to remove arch dependency
- fixed compilation error for cpufreq due to moving header in this branch
  : use of_machine_is_compatible() instead of soc_is_exynos...()

Note that based on tags/samsung-clk and tags/samsung-fixes.

* tag 'samsung-cleanup' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  cpufreq: exynos: Fix the compile error
  ARM: S3C24XX: move debug-macro.S into the common space
  ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
  ARM: S3C24XX: trim down debug uart handling
  ARM: compressed/head.S: remove s3c24xx special case
  ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
  ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
  ARM: EXYNOS: Remove exynos_subsys registration
  ARM: EXYNOS: Remove duplicate lines in Makefile
  ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
  ARM: dts: Remove g2d_pd node for exynos5420
  ARM: dts: Remove mau_pd node for exynos5420
  ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
  ARM: dts: disable MDMA1 node for exynos5420
  ARM: EXYNOS: fix the secondary CPU boot of exynos4212

Signed-off-by: Olof Johansson <olof@lixom.net>

21 files changed, 219 insertions, 322 deletions

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index eab8ecbe69c1..4678870f8ee8 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -625,6 +625,7 @@ choice
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -637,6 +638,7 @@ choice
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -649,6 +651,7 @@ choice
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -670,6 +673,33 @@ choice
 		  The uncompressor code port configuration is now handled
 		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
+	config DEBUG_S3C2410_UART0
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+	config DEBUG_S3C2410_UART1
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
+
+	config DEBUG_S3C2410_UART2
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
+
 	config DEBUG_SOCFPGA_UART
 		depends on ARCH_SOCFPGA
 		bool "Use SOCFPGA UART for low-level debug"
@@ -921,6 +951,13 @@ endchoice
 config DEBUG_EXYNOS_UART
 	bool
 
+config DEBUG_S3C2410_UART
+	bool
+	select DEBUG_S3C24XX_UART
+
+config DEBUG_S3C24XX_UART
+	bool
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
@@ -973,6 +1010,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6SL_UART
 	default "debug/msm.S" if DEBUG_MSM_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/sti.S" if DEBUG_STI_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
@@ -1029,6 +1067,12 @@ config DEBUG_UART_PHYS
 	default 0x40090000 if ARCH_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if ARCH_GEMINI
+	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+				DEBUG_S3C2410_UART0)
+	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+				DEBUG_S3C2410_UART1)
+	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+				DEBUG_S3C2410_UART2)
 	default 0x7c0003f8 if FOOTBRIDGE
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
@@ -1058,7 +1102,7 @@ config DEBUG_UART_PHYS
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1075,6 +1119,12 @@ config DEBUG_UART_VIRT
 	default 0xf2100000 if DEBUG_PXA_UART1
 	default 0xf4090000 if ARCH_LPC32XX
 	default 0xf4200000 if ARCH_GEMINI
+	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+				DEBUG_S3C2410_UART0)
+	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+				DEBUG_S3C2410_UART1)
+	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+				DEBUG_S3C2410_UART2)
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
@@ -1116,7 +1166,7 @@ config DEBUG_UART_VIRT
 	default 0xff003000 if DEBUG_U300_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 066b03480b63..3a8b32df6b31 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -60,11 +60,6 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #endif
 		.endm
-#elif defined(CONFIG_ARCH_S3C24XX)
-		.macro loadsp, rb, tmp
-		mov	\rb, #0x50000000
-		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
-		.endm
 #else
 		.macro	loadsp,	rb, tmp
 		addruart \rb, \tmp
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 80a3bf4c5986..896a2a6619e0 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -364,16 +364,4 @@
 			gpio-key,wakeup;
 		};
 	};
-
-	amba {
-		mdma1: mdma@11C10000 {
-			/*
-			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in the kernel
-			 * for boards that run in secure mode, we are getting
-			 * imprecise external aborts causing the kernel to oops.
-			 */
-			status = "disabled";
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index c3a9a66c5767..418f2506aaf0 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -219,16 +219,6 @@
 		reg = <0x100440C0 0x20>;
 	};
 
-	mau_pd: power-domain@100440E0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440E0 0x20>;
-	};
-
-	g2d_pd: power-domain@10044100 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044100 0x20>;
-	};
-
 	msc_pd: power-domain@10044120 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044120 0x20>;
@@ -336,6 +326,13 @@
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
+			/*
+			 * MDMA1 can support both secure and non-secure
+			 * AXI transactions. When this is enabled in the kernel
+			 * for boards that run in secure mode, we are getting
+			 * imprecise external aborts causing the kernel to oops.
+			 */
+			status = "disabled";
 		};
 	};
 
@@ -730,6 +727,5 @@
 		interrupts = <0 112 0>;
 		clocks = <&clock 471>;
 		clock-names = "secss";
-		samsung,power-domain = <&g2d_pd>;
 	};
 };
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 4ce7b70ea901..e07a227ec0db 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y
 CONFIG_I2C=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_EXYNOS5=y
 CONFIG_I2C_S3C2410=y
 CONFIG_DEBUG_GPIO=y
 # CONFIG_HWMON is not set
diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
new file mode 100644
index 000000000000..b1f54dc4888c
--- /dev/null
+++ b/arch/arm/include/debug/s3c24xx.S
@@ -0,0 +1,46 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2005 Simtec Electronics
+ *
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_s3c.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+
+	.macro addruart, rp, rv, tmp
+		ldr	\rp, = CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, = CONFIG_DEBUG_UART_VIRT
+	.endm
+
+	.macro  fifo_full_s3c2410 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+	.macro fifo_level_s3c2410 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+	.endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_DEBUG_S3C2410_UART)
+#define fifo_full  fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index a656dbe3b78c..f6dcc256db56 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -12,20 +12,15 @@ obj-				:=
 
 # Core
 
-obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o
 
 obj-$(CONFIG_PM_SLEEP)		+= pm.o sleep.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
-obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
-
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
-obj-$(CONFIG_ARCH_EXYNOS)	+= exynos-smc.o
-obj-$(CONFIG_ARCH_EXYNOS)	+= firmware.o
-
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 9ef3f83efaff..c1a2f2207af0 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -15,6 +15,75 @@
 #include <linux/reboot.h>
 #include <linux/of.h>
 
+#define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
+#define EXYNOS4412_CPU_ID	0xE4412200
+#define EXYNOS4_CPU_MASK	0xFFFE0000
+
+#define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5420_SOC_ID	0xE5420000
+#define EXYNOS5440_SOC_ID	0xE5440000
+#define EXYNOS5_SOC_MASK	0xFFFFF000
+
+extern unsigned long samsung_cpu_id;
+
+#define IS_SAMSUNG_CPU(name, id, mask)		\
+static inline int is_samsung_##name(void)	\
+{						\
+	return ((samsung_cpu_id & mask) == (id & mask));	\
+}
+
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210()	is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412()	is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412()	0
+#endif
+
+#define EXYNOS4210_REV_0	(0x0)
+#define EXYNOS4210_REV_1_0	(0x10)
+#define EXYNOS4210_REV_1_1	(0x11)
+
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250()	is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5420)
+# define soc_is_exynos5420()	is_samsung_exynos5420()
+#else
+# define soc_is_exynos5420()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5440)
+# define soc_is_exynos5440()	is_samsung_exynos5440()
+#else
+# define soc_is_exynos5440()	0
+#endif
+
+#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
+			  soc_is_exynos4412())
+#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420())
+
 void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
 
 struct map_desc;
@@ -63,4 +132,7 @@ struct exynos_pmu_conf {
 
 extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
 
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+extern unsigned int samsung_rev(void);
+
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index c57cae0e8779..3dd385ebf195 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -24,7 +24,6 @@
 #include <asm/unified.h>
 #include <asm/cpuidle.h>
 
-#include <plat/cpu.h>
 #include <plat/pm.h>
 
 #include <mach/map.h>
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index b32a907d021d..59aab756702e 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -26,8 +26,6 @@
 #include <asm/mach/map.h>
 #include <asm/memory.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "mfc.h"
 #include "regs-pmu.h"
@@ -308,17 +306,6 @@ void __init exynos_init_io(void)
 	exynos_map_io();
 }
 
-struct bus_type exynos_subsys = {
-	.name		= "exynos-core",
-	.dev_name	= "exynos-core",
-};
-
-static int __init exynos_core_init(void)
-{
-	return subsys_system_register(&exynos_subsys, NULL);
-}
-core_initcall(exynos_core_init);
-
 static int __init exynos4_l2x0_cache_init(void)
 {
 	int ret;
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 932129ef26c6..f6cb510aee85 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -18,6 +18,7 @@
 
 #include <mach/map.h>
 
+#include "common.h"
 #include "smc.h"
 
 static int exynos_do_idle(void)
@@ -28,13 +29,24 @@ static int exynos_do_idle(void)
 
 static int exynos_cpu_boot(int cpu)
 {
+	/*
+	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+	 * But, Exynos4212 has only one secondary CPU so second parameter
+	 * isn't used for informing secure firmware about CPU id.
+	 */
+	if (soc_is_exynos4212())
+		cpu = 0;
+
 	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
 	return 0;
 }
 
 static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 {
-	void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
+	void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c;
+
+	if (!soc_is_exynos4212())
+		boot_reg += 4*cpu;
 
 	__raw_writel(boot_addr, boot_reg);
 	return 0;
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 5eead530c6f8..3cab3f506689 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -19,61 +19,9 @@
 #include <asm/cp15.h>
 #include <asm/smp_plat.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "regs-pmu.h"
 
-static inline void cpu_enter_lowpower_a9(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"	mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %3\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
-static inline void cpu_enter_lowpower_a15(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-
-	flush_cache_louis();
-
-	asm volatile(
-	/*
-	* Turn off coherency
-	*/
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	: "=&r" (v)
-	: "Ir" (0x40)
-	: "cc");
-
-	isb();
-	dsb();
-}
-
 static inline void cpu_leave_lowpower(void)
 {
 	unsigned int v;
@@ -132,19 +80,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 void __ref exynos_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
-	int primary_part = 0;
 
-	/*
-	 * we're ready for shutdown now, so do it.
-	 * Exynos4 is A9 based while Exynos5 is A15; check the CPU part
-	 * number by reading the Main ID register and then perform the
-	 * appropriate sequence for entering low power.
-	 */
-	asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc");
-	if ((primary_part & 0xfff0) == 0xc0f0)
-		cpu_enter_lowpower_a15();
-	else
-		cpu_enter_lowpower_a9();
+	v7_exit_coherency_flush(louis);
 
 	platform_do_lowpower(cpu, &spurious);
 
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 03e5e9f94705..c28cdb1c82cd 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -26,8 +26,6 @@
 #include <asm/smp_scu.h>
 #include <asm/firmware.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "regs-pmu.h"
 
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 15af0ceb0a66..ca672e24b5cd 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -26,7 +26,6 @@
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 
-#include <plat/cpu.h>
 #include <plat/pm-common.h>
 #include <plat/pll.h>
 #include <plat/regs-srom.h>
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 05c7ce15322a..fb0deda3b3a4 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -13,8 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/bug.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "regs-pmu.h"
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 22d149bcfcc6..45a7026e9419 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -39,7 +39,6 @@ config CPU_S3C2410
 	default y
 	select COMMON_CLK
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2410
 	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
@@ -53,7 +52,6 @@ config CPU_S3C2412
 	bool "SAMSUNG S3C2412"
 	select COMMON_CLK
 	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2412_COMMON_CLK
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
@@ -64,7 +62,6 @@ config CPU_S3C2416
 	bool "SAMSUNG S3C2416/S3C2450"
 	select COMMON_CLK
 	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2416_PM if PM
 	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
@@ -75,7 +72,6 @@ config CPU_S3C2440
 	bool "SAMSUNG S3C2440"
 	select COMMON_CLK
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
@@ -86,7 +82,6 @@ config CPU_S3C2442
 	bool "SAMSUNG S3C2442"
 	select COMMON_CLK
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
@@ -102,7 +97,6 @@ config CPU_S3C2443
 	bool "SAMSUNG S3C2443"
 	select COMMON_CLK
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
 	help
@@ -164,28 +158,6 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
-# low-level serial option nodes
-
-config CPU_LLSERIAL_S3C2410_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-	bool
-	help
-	  Selected if there is an S3C2410 (or register compatible) serial
-	  low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-	bool
-	help
-	  Selected if there is an S3C2440 (or register compatible) serial
-	  low-level implementation needed
-
 config S3C24XX_PLL
 	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
 	depends on ARM_S3C24XX_CPUFREQ
diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
deleted file mode 100644
index 2f39737544c0..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2005 Simtec Electronics
- *
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <linux/serial_s3c.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C24XX_PA_UART
-		ldr	\rv, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-	.macro fifo_full_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	1004f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-1004:
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		moveq	\rd, \rd, lsr #SHIFT_2440TXF
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-/* fifo level reading */
-
-	.macro fifo_level_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	10000f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-
-10000:
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-	.endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full  fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <debug/samsung.S>
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 5992b8dd9b89..5a237db9f9eb 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -43,16 +43,6 @@ extern unsigned long samsung_cpu_id;
 #define S5PV210_CPU_ID		0x43110000
 #define S5PV210_CPU_MASK	0xFFFFF000
 
-#define EXYNOS4210_CPU_ID	0x43210000
-#define EXYNOS4212_CPU_ID	0x43220000
-#define EXYNOS4412_CPU_ID	0xE4412200
-#define EXYNOS4_CPU_MASK	0xFFFE0000
-
-#define EXYNOS5250_SOC_ID	0x43520000
-#define EXYNOS5420_SOC_ID	0xE5420000
-#define EXYNOS5440_SOC_ID	0xE5440000
-#define EXYNOS5_SOC_MASK	0xFFFFF000
-
 #define IS_SAMSUNG_CPU(name, id, mask)		\
 static inline int is_samsung_##name(void)	\
 {						\
@@ -68,12 +58,6 @@ IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
 IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -126,50 +110,6 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_s5pv210()	0
 #endif
 
-#if defined(CONFIG_CPU_EXYNOS4210)
-# define soc_is_exynos4210()	is_samsung_exynos4210()
-#else
-# define soc_is_exynos4210()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4212)
-# define soc_is_exynos4212()	is_samsung_exynos4212()
-#else
-# define soc_is_exynos4212()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412)
-# define soc_is_exynos4412()	is_samsung_exynos4412()
-#else
-# define soc_is_exynos4412()	0
-#endif
-
-#define EXYNOS4210_REV_0	(0x0)
-#define EXYNOS4210_REV_1_0	(0x10)
-#define EXYNOS4210_REV_1_1	(0x11)
-
-#if defined(CONFIG_SOC_EXYNOS5250)
-# define soc_is_exynos5250()	is_samsung_exynos5250()
-#else
-# define soc_is_exynos5250()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5420)
-# define soc_is_exynos5420()	is_samsung_exynos5420()
-#else
-# define soc_is_exynos5420()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5440)
-# define soc_is_exynos5440()	is_samsung_exynos5440()
-#else
-# define soc_is_exynos5440()	0
-#endif
-
-#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
-			  soc_is_exynos4412())
-#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420())
-
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef KHZ
@@ -239,7 +179,6 @@ extern struct bus_type s3c2443_subsys;
 extern struct bus_type s3c6410_subsys;
 extern struct bus_type s5p64x0_subsys;
 extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos_subsys;
 
 extern void (*s5pc1xx_idle)(void);
 
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index f99cfe24e7bc..e8a4a7ed38c1 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -17,6 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <plat/cpu.h>
 
@@ -163,14 +164,22 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 	if (!exynos_info)
 		return -ENOMEM;
 
-	if (soc_is_exynos4210())
+	if (of_machine_is_compatible("samsung,exynos4210")) {
+		exynos_info->type = EXYNOS_SOC_4210;
 		ret = exynos4210_cpufreq_init(exynos_info);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
+	} else if (of_machine_is_compatible("samsung,exynos4212")) {
+		exynos_info->type = EXYNOS_SOC_4212;
 		ret = exynos4x12_cpufreq_init(exynos_info);
-	else if (soc_is_exynos5250())
+	} else if (of_machine_is_compatible("samsung,exynos4412")) {
+		exynos_info->type = EXYNOS_SOC_4412;
+		ret = exynos4x12_cpufreq_init(exynos_info);
+	} else if (of_machine_is_compatible("samsung,exynos5250")) {
+		exynos_info->type = EXYNOS_SOC_5250;
 		ret = exynos5250_cpufreq_init(exynos_info);
-	else
-		return 0;
+	} else {
+		pr_err("%s: Unknown SoC type\n", __func__);
+		return -ENODEV;
+	}
 
 	if (ret)
 		goto err_vdd_arm;
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index 3ddade8a5125..f189547bb447 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -17,6 +17,13 @@ enum cpufreq_level_index {
 	L20,
 };
 
+enum exynos_soc_type {
+	EXYNOS_SOC_4210,
+	EXYNOS_SOC_4212,
+	EXYNOS_SOC_4412,
+	EXYNOS_SOC_5250,
+};
+
 #define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
 	{ \
 		.freq = (f) * 1000, \
@@ -34,6 +41,7 @@ struct apll_freq {
 };
 
 struct exynos_dvfs_info {
+	enum exynos_soc_type type;
 	unsigned long	mpll_freq_khz;
 	unsigned int	pll_safe_idx;
 	struct clk	*cpu_clk;
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 466c76ad335b..63a3907ce578 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -100,7 +100,6 @@ static struct apll_freq apll_freq_4412[] = {
 static void exynos4x12_set_clkdiv(unsigned int div_index)
 {
 	unsigned int tmp;
-	unsigned int stat_cpu1;
 
 	/* Change Divider - CPU0 */
 
@@ -115,13 +114,11 @@ static void exynos4x12_set_clkdiv(unsigned int div_index)
 	tmp = apll_freq_4x12[div_index].clk_div_cpu1;
 
 	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
-	if (soc_is_exynos4212())
-		stat_cpu1 = 0x11;
-	else
-		stat_cpu1 = 0x111;
 
-	while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1)
+	do {
 		cpu_relax();
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
+	} while (tmp != 0x0);
 }
 
 static void exynos4x12_set_apll(unsigned int index)
@@ -184,7 +181,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 	if (IS_ERR(mout_apll))
 		goto err_mout_apll;
 
-	if (soc_is_exynos4212())
+	if (info->type == EXYNOS_SOC_4212)
 		apll_freq_4x12 = apll_freq_4212;
 	else
 		apll_freq_4x12 = apll_freq_4412;