summaryrefslogtreecommitdiffstats
path: root/tools/testing
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing')
-rwxr-xr-xtools/testing/ktest/ktest.pl255
-rw-r--r--tools/testing/ktest/sample.conf50
2 files changed, 301 insertions, 4 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 6166f3a0f2ea..5323c6f9bf9b 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -86,6 +86,9 @@ my $make;
my $post_install;
my $noclean;
my $minconfig;
+my $start_minconfig;
+my $output_minconfig;
+my $ignore_config;
my $addconfig;
my $in_bisect = 0;
my $bisect_bad = "";
@@ -1189,7 +1192,11 @@ sub apply_min_config {
sub make_oldconfig {
- apply_min_config;
+ my @force_list = keys %force_config;
+
+ if ($#force_list >= 0) {
+ apply_min_config;
+ }
if (!run_command "$make oldnoconfig") {
# Perhaps oldnoconfig doesn't exist in this version of the kernel
@@ -1678,21 +1685,27 @@ my %null_config;
my %dependency;
-sub process_config_ignore {
- my ($config) = @_;
+sub assign_configs {
+ my ($hash, $config) = @_;
open (IN, $config)
or dodie "Failed to read $config";
while (<IN>) {
if (/^((CONFIG\S*)=.*)/) {
- $config_ignore{$2} = $1;
+ ${$hash}{$2} = $1;
}
}
close(IN);
}
+sub process_config_ignore {
+ my ($config) = @_;
+
+ assign_configs \%config_ignore, $config;
+}
+
sub read_current_config {
my ($config_ref) = @_;
@@ -2149,6 +2162,226 @@ sub patchcheck {
return 1;
}
+sub read_config_list {
+ my ($config) = @_;
+
+ open (IN, $config)
+ or dodie "Failed to read $config";
+
+ while (<IN>) {
+ if (/^((CONFIG\S*)=.*)/) {
+ if (!defined($config_ignore{$2})) {
+ $config_list{$2} = $1;
+ }
+ }
+ }
+
+ close(IN);
+}
+
+sub read_output_config {
+ my ($config) = @_;
+
+ assign_configs \%config_ignore, $config;
+}
+
+sub make_new_config {
+ my @configs = @_;
+
+ open (OUT, ">$output_config")
+ or dodie "Failed to write $output_config";
+
+ foreach my $config (@configs) {
+ print OUT "$config\n";
+ }
+ close OUT;
+}
+
+sub make_min_config {
+ my ($i) = @_;
+
+ if (!defined($output_minconfig)) {
+ fail "OUTPUT_MIN_CONFIG not defined" and return;
+ }
+ if (!defined($start_minconfig)) {
+ fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return;
+ }
+
+ # First things first. We build an allnoconfig to find
+ # out what the defaults are that we can't touch.
+ # Some are selections, but we really can't handle selections.
+
+ my $save_minconfig = $minconfig;
+ undef $minconfig;
+
+ run_command "$make allnoconfig" or return 0;
+
+ process_config_ignore $output_config;
+ my %keep_configs;
+
+ if (defined($ignore_config)) {
+ # make sure the file exists
+ `touch $ignore_config`;
+ assign_configs \%keep_configs, $ignore_config;
+ }
+
+ doprint "Load initial configs from $start_minconfig\n";
+
+ # Look at the current min configs, and save off all the
+ # ones that were set via the allnoconfig
+ my %min_configs;
+ assign_configs \%min_configs, $start_minconfig;
+
+ my @config_keys = keys %min_configs;
+
+ # Remove anything that was set by the make allnoconfig
+ # we shouldn't need them as they get set for us anyway.
+ foreach my $config (@config_keys) {
+ # Remove anything in the ignore_config
+ if (defined($keep_configs{$config})) {
+ my $file = $ignore_config;
+ $file =~ s,.*/(.*?)$,$1,;
+ doprint "$config set by $file ... ignored\n";
+ delete $min_configs{$config};
+ next;
+ }
+ # But make sure the settings are the same. If a min config
+ # sets a selection, we do not want to get rid of it if
+ # it is not the same as what we have. Just move it into
+ # the keep configs.
+ if (defined($config_ignore{$config})) {
+ if ($config_ignore{$config} ne $min_configs{$config}) {
+ doprint "$config is in allnoconfig as '$config_ignore{$config}'";
+ doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n";
+ $keep_configs{$config} = $min_configs{$config};
+ } else {
+ doprint "$config set by allnoconfig ... ignored\n";
+ }
+ delete $min_configs{$config};
+ }
+ }
+
+ my %nochange_config;
+
+ my $done = 0;
+
+ while (!$done) {
+
+ my $config;
+ my $found;
+
+ # Now disable each config one by one and do a make oldconfig
+ # till we find a config that changes our list.
+
+ # Put configs that did not modify the config at the end.
+ my @test_configs = keys %min_configs;
+ my $reset = 1;
+ for (my $i = 0; $i < $#test_configs; $i++) {
+ if (!defined($nochange_config{$test_configs[0]})) {
+ $reset = 0;
+ last;
+ }
+ # This config didn't change the .config last time.
+ # Place it at the end
+ my $config = shift @test_configs;
+ push @test_configs, $config;
+ }
+
+ # if every test config has failed to modify the .config file
+ # in the past, then reset and start over.
+ if ($reset) {
+ undef %nochange_config;
+ }
+
+ foreach my $config (@test_configs) {
+
+ # Remove this config from the list of configs
+ # do a make oldnoconfig and then read the resulting
+ # .config to make sure it is missing the config that
+ # we had before
+ my %configs = %min_configs;
+ delete $configs{$config};
+ make_new_config ((values %configs), (values %keep_configs));
+ make_oldconfig;
+ undef %configs;
+ assign_configs \%configs, $output_config;
+
+ if (!defined($configs{$config})) {
+ $found = $config;
+ last;
+ }
+
+ doprint "disabling config $config did not change .config\n";
+
+ # oh well, try another config
+ $nochange_config{$config} = 1;
+ }
+
+ if (!defined($found)) {
+ doprint "No more configs found that we can disable\n";
+ $done = 1;
+ last;
+ }
+
+ $config = $found;
+
+ doprint "Test with $config disabled\n";
+
+ # set in_bisect to keep build and monitor from dieing
+ $in_bisect = 1;
+
+ my $failed = 0;
+ build "oldconfig";
+ start_monitor_and_boot or $failed = 1;
+ end_monitor;
+
+ $in_bisect = 0;
+
+ if ($failed) {
+ doprint "$config is needed to boot the box... keeping\n";
+ # this config is needed, add it to the ignore list.
+ $keep_configs{$config} = $min_configs{$config};
+ delete $min_configs{$config};
+ } else {
+ # We booted without this config, remove it from the minconfigs.
+ doprint "$config is not needed, disabling\n";
+
+ delete $min_configs{$config};
+
+ # Also disable anything that is not enabled in this config
+ my %configs;
+ assign_configs \%configs, $output_config;
+ my @config_keys = keys %min_configs;
+ foreach my $config (@config_keys) {
+ if (!defined($configs{$config})) {
+ doprint "$config is not set, disabling\n";
+ delete $min_configs{$config};
+ }
+ }
+
+ # Save off all the current mandidory configs
+ open (OUT, ">$output_minconfig")
+ or die "Can't write to $output_minconfig";
+ foreach my $config (keys %keep_configs) {
+ print OUT "$keep_configs{$config}\n";
+ }
+ foreach my $config (keys %min_configs) {
+ print OUT "$min_configs{$config}\n";
+ }
+ close OUT;
+ }
+
+ doprint "Reboot and wait $sleep_time seconds\n";
+ reboot;
+ start_monitor;
+ wait_for_monitor $sleep_time;
+ end_monitor;
+ }
+
+ success $i;
+ return 1;
+}
+
$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n";
if ($#ARGV == 0) {
@@ -2294,6 +2527,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$reboot = set_test_option("REBOOT", $i);
$noclean = set_test_option("BUILD_NOCLEAN", $i);
$minconfig = set_test_option("MIN_CONFIG", $i);
+ $output_minconfig = set_test_option("OUTPUT_MIN_CONFIG", $i);
+ $start_minconfig = set_test_option("START_MIN_CONFIG", $i);
+ $ignore_config = set_test_option("IGNORE_CONFIG", $i);
$run_test = set_test_option("TEST", $i);
$addconfig = set_test_option("ADD_CONFIG", $i);
$reboot_type = set_test_option("REBOOT_TYPE", $i);
@@ -2329,6 +2565,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$target_image = set_test_option("TARGET_IMAGE", $i);
$localversion = set_test_option("LOCALVERSION", $i);
+ if (!defined($start_minconfig)) {
+ $start_minconfig = $minconfig;
+ }
+
chdir $builddir || die "can't change directory to $builddir";
if (!-d $tmpdir) {
@@ -2361,6 +2601,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$run_type = $opt{"CONFIG_BISECT_TYPE[$i]"};
}
+ if ($test_type eq "make_min_config") {
+ $run_type = "";
+ }
+
# mistake in config file?
if (!defined($run_type)) {
$run_type = "ERROR";
@@ -2396,6 +2640,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
} elsif ($test_type eq "patchcheck") {
patchcheck $i;
next;
+ } elsif ($test_type eq "make_min_config") {
+ make_min_config $i;
+ next;
}
if ($build_type ne "nobuild") {
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 82c966c32d61..a83846d829bd 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -814,3 +814,53 @@
# MIN_CONFIG = /home/test/config-min
# BISECT_MANUAL = 1
#
+#
+#
+# For TEST_TYPE = make_min_config
+#
+# After doing a make localyesconfig, your kernel configuration may
+# not be the most useful minimum configuration. Having a true minimum
+# config that you can use against other configs is very useful if
+# someone else has a config that breaks on your code. By only forcing
+# those configurations that are truly required to boot your machine
+# will give you less of a chance that one of your set configurations
+# will make the bug go away. This will give you a better chance to
+# be able to reproduce the reported bug matching the broken config.
+#
+# Note, this does take some time, and may require you to run the
+# test over night, or perhaps over the weekend. But it also allows
+# you to interrupt it, and gives you the current minimum config
+# that was found till that time.
+#
+# Note, this test automatically assumes a BUILD_TYPE of oldconfig
+# and its test type acts like boot.
+# TODO: add a test version that makes the config do more than just
+# boot, like having network access.
+#
+# OUTPUT_MIN_CONFIG is the path and filename of the file that will
+# be created from the MIN_CONFIG. If you interrupt the test, set
+# this file as your new min config, and use it to continue the test.
+# This file does not need to exist on start of test.
+# This file is not created until a config is found that can be removed.
+# (required field)
+#
+# START_MIN_CONFIG is the config to use to start the test with.
+# you can set this as the same OUTPUT_MIN_CONFIG, but if you do
+# the OUTPUT_MIN_CONFIG file must exist.
+# (default MIN_CONFIG)
+#
+# IGNORE_CONFIG is used to specify a config file that has configs that
+# you already know must be set. Configs are written here that have
+# been tested and proved to be required. It is best to define this
+# file if you intend on interrupting the test and running it where
+# it left off. New configs that it finds will be written to this file
+# and will not be tested again in later runs.
+# (optional)
+#
+# Example:
+#
+# TEST_TYPE = make_min_config
+# OUTPUT_MIN_CONFIG = /path/to/config-new-min
+# START_MIN_CONFIG = /path/to/config-min
+# IGNORE_CONFIG = /path/to/config-tested
+#