diff options
Diffstat (limited to 'sound/usb/quirks-table.h')
| -rw-r--r-- | sound/usb/quirks-table.h | 78 |
1 files changed, 67 insertions, 11 deletions
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index f4fb002e3ef4..23eafd50126f 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2827,14 +2827,24 @@ YAMAHA_DEVICE(0x7010, "UB99"), /* Lenovo ThinkStation P620 Rear Line-in, Line-out and Microphone */ { USB_DEVICE(0x17aa, 0x1046), - QUIRK_DEVICE_PROFILE("Lenovo", "ThinkStation P620 Rear", - "Lenovo-ThinkStation-P620-Rear"), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Lenovo", + .product_name = "ThinkStation P620 Rear", + .profile_name = "Lenovo-ThinkStation-P620-Rear", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_SETUP_DISABLE_AUTOSUSPEND + } }, /* Lenovo ThinkStation P620 Internal Speaker + Front Headset */ { USB_DEVICE(0x17aa, 0x104d), - QUIRK_DEVICE_PROFILE("Lenovo", "ThinkStation P620 Main", - "Lenovo-ThinkStation-P620-Main"), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Lenovo", + .product_name = "ThinkStation P620 Main", + .profile_name = "Lenovo-ThinkStation-P620-Main", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_SETUP_DISABLE_AUTOSUSPEND + } }, /* Native Instruments MK2 series */ @@ -3549,14 +3559,40 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), { /* * Pioneer DJ DJM-250MK2 - * PCM is 8 channels out @ 48 fixed (endpoints 0x01). - * The output from computer to the mixer is usable. + * PCM is 8 channels out @ 48 fixed (endpoint 0x01) + * and 8 channels in @ 48 fixed (endpoint 0x82). + * + * Both playback and recording is working, even simultaneously. * - * The input (phono or line to computer) is not working. - * It should be at endpoint 0x82 and probably also 8 channels, - * but it seems that it works only with Pioneer proprietary software. - * Even on officially supported OS, the Audacity was unable to record - * and Mixxx to recognize the control vinyls. + * Playback channels could be mapped to: + * - CH1 + * - CH2 + * - AUX + * + * Recording channels could be mapped to: + * - Post CH1 Fader + * - Post CH2 Fader + * - Cross Fader A + * - Cross Fader B + * - MIC + * - AUX + * - REC OUT + * + * There is remaining problem with recording directly from PHONO/LINE. + * If we map a channel to: + * - CH1 Control Tone PHONO + * - CH1 Control Tone LINE + * - CH2 Control Tone PHONO + * - CH2 Control Tone LINE + * it is silent. + * There is no signal even on other operating systems with official drivers. + * The signal appears only when a supported application is started. + * This needs to be investigated yet... + * (there is quite a lot communication on the USB in both directions) + * + * In current version this mixer could be used for playback + * and for recording from vinyls (through Post CH* Fader) + * but not for DVS (Digital Vinyl Systems) like in Mixxx. */ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017), .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { @@ -3580,6 +3616,26 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), .rate_max = 48000, .nr_rates = 1, .rate_table = (unsigned int[]) { 48000 } + } + }, + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, // inputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x82, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC| + USB_ENDPOINT_USAGE_IMPLICIT_FB, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 } } }, { |