diff options
Diffstat (limited to 'sound/soc/codecs/wm8903.c')
| -rw-r--r-- | sound/soc/codecs/wm8903.c | 27 |
1 files changed, 14 insertions, 13 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index fa2f67850f18..09f4980630c7 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -342,7 +342,7 @@ static void wm8903_seq_notifier(struct snd_soc_component *component, if (!(wm8903->dcs_pending & (1 << i))) continue; - val = snd_soc_component_read32(component, + val = snd_soc_component_read(component, WM8903_DC_SERVO_READBACK_1 + i); dev_dbg(component->dev, "DC servo %d: %x\n", 3 - i, val); @@ -375,7 +375,7 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, u16 reg; int ret; - reg = snd_soc_component_read32(component, WM8903_CLASS_W_0); + reg = snd_soc_component_read(component, WM8903_CLASS_W_0); /* Turn it off if we're about to enable bypass */ if (ucontrol->value.integer.value[0]) { @@ -1224,7 +1224,7 @@ static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) { struct snd_soc_component *component = codec_dai->component; - u16 aif1 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_1); + u16 aif1 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_1); aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK | WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV); @@ -1307,12 +1307,12 @@ static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai, return 0; } -static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute) +static int wm8903_mute(struct snd_soc_dai *codec_dai, int mute, int direction) { struct snd_soc_component *component = codec_dai->component; u16 reg; - reg = snd_soc_component_read32(component, WM8903_DAC_DIGITAL_1); + reg = snd_soc_component_read(component, WM8903_DAC_DIGITAL_1); if (mute) reg |= WM8903_DAC_MUTE; @@ -1451,12 +1451,12 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, int cur_val; int clk_sys; - u16 aif1 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_1); - u16 aif2 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_2); - u16 aif3 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_3); - u16 clock0 = snd_soc_component_read32(component, WM8903_CLOCK_RATES_0); - u16 clock1 = snd_soc_component_read32(component, WM8903_CLOCK_RATES_1); - u16 dac_digital1 = snd_soc_component_read32(component, WM8903_DAC_DIGITAL_1); + u16 aif1 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_1); + u16 aif2 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_2); + u16 aif3 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_3); + u16 clock0 = snd_soc_component_read(component, WM8903_CLOCK_RATES_0); + u16 clock1 = snd_soc_component_read(component, WM8903_CLOCK_RATES_1); + u16 dac_digital1 = snd_soc_component_read(component, WM8903_DAC_DIGITAL_1); /* Enable sloping stopband filter for low sample rates */ if (fs <= 24000) @@ -1737,9 +1737,10 @@ static irqreturn_t wm8903_irq(int irq, void *data) static const struct snd_soc_dai_ops wm8903_dai_ops = { .hw_params = wm8903_hw_params, - .digital_mute = wm8903_digital_mute, + .mute_stream = wm8903_mute, .set_fmt = wm8903_set_dai_fmt, .set_sysclk = wm8903_set_dai_sysclk, + .no_capture_mute = 1, }; static struct snd_soc_dai_driver wm8903_dai = { @@ -1927,7 +1928,7 @@ static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c, * We assume the controller imposes no restrictions, * so we are able to select active-high */ - /* Fall-through */ + fallthrough; case IRQ_TYPE_LEVEL_HIGH: pdata->irq_active_low = false; break; |