diff options
Diffstat (limited to 'net/bluetooth/hci_core.c')
| -rw-r--r-- | net/bluetooth/hci_core.c | 1203 |
1 files changed, 1 insertions, 1202 deletions
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 420ed6a02337..e0c0aa779dbc 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -62,824 +62,6 @@ DEFINE_MUTEX(hci_cb_list_lock); /* HCI ID Numbering */ static DEFINE_IDA(hci_index_ida); -static int hci_reset_req(struct hci_request *req, unsigned long opt) -{ - BT_DBG("%s %ld", req->hdev->name, opt); - - /* Reset device */ - set_bit(HCI_RESET, &req->hdev->flags); - hci_req_add(req, HCI_OP_RESET, 0, NULL); - return 0; -} - -static void bredr_init(struct hci_request *req) -{ - req->hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_PACKET_BASED; - - /* Read Local Supported Features */ - hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); - - /* Read Local Version */ - hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); - - /* Read BD Address */ - hci_req_add(req, HCI_OP_READ_BD_ADDR, 0, NULL); -} - -static void amp_init1(struct hci_request *req) -{ - req->hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_BLOCK_BASED; - - /* Read Local Version */ - hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); - - /* Read Local Supported Commands */ - hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL); - - /* Read Local AMP Info */ - hci_req_add(req, HCI_OP_READ_LOCAL_AMP_INFO, 0, NULL); - - /* Read Data Blk size */ - hci_req_add(req, HCI_OP_READ_DATA_BLOCK_SIZE, 0, NULL); - - /* Read Flow Control Mode */ - hci_req_add(req, HCI_OP_READ_FLOW_CONTROL_MODE, 0, NULL); - - /* Read Location Data */ - hci_req_add(req, HCI_OP_READ_LOCATION_DATA, 0, NULL); -} - -static int amp_init2(struct hci_request *req) -{ - /* Read Local Supported Features. Not all AMP controllers - * support this so it's placed conditionally in the second - * stage init. - */ - if (req->hdev->commands[14] & 0x20) - hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); - - return 0; -} - -static int hci_init1_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - - BT_DBG("%s %ld", hdev->name, opt); - - /* Reset */ - if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) - hci_reset_req(req, 0); - - switch (hdev->dev_type) { - case HCI_PRIMARY: - bredr_init(req); - break; - case HCI_AMP: - amp_init1(req); - break; - default: - bt_dev_err(hdev, "Unknown device type %d", hdev->dev_type); - break; - } - - return 0; -} - -static void bredr_setup(struct hci_request *req) -{ - __le16 param; - __u8 flt_type; - - /* Read Buffer Size (ACL mtu, max pkt, etc.) */ - hci_req_add(req, HCI_OP_READ_BUFFER_SIZE, 0, NULL); - - /* Read Class of Device */ - hci_req_add(req, HCI_OP_READ_CLASS_OF_DEV, 0, NULL); - - /* Read Local Name */ - hci_req_add(req, HCI_OP_READ_LOCAL_NAME, 0, NULL); - - /* Read Voice Setting */ - hci_req_add(req, HCI_OP_READ_VOICE_SETTING, 0, NULL); - - /* Read Number of Supported IAC */ - hci_req_add(req, HCI_OP_READ_NUM_SUPPORTED_IAC, 0, NULL); - - /* Read Current IAC LAP */ - hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL); - - /* Clear Event Filters */ - flt_type = HCI_FLT_CLEAR_ALL; - hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); - - /* Connection accept timeout ~20 secs */ - param = cpu_to_le16(0x7d00); - hci_req_add(req, HCI_OP_WRITE_CA_TIMEOUT, 2, ¶m); -} - -static void le_setup(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - - /* Read LE Buffer Size */ - hci_req_add(req, HCI_OP_LE_READ_BUFFER_SIZE, 0, NULL); - - /* Read LE Local Supported Features */ - hci_req_add(req, HCI_OP_LE_READ_LOCAL_FEATURES, 0, NULL); - - /* Read LE Supported States */ - hci_req_add(req, HCI_OP_LE_READ_SUPPORTED_STATES, 0, NULL); - - /* LE-only controllers have LE implicitly enabled */ - if (!lmp_bredr_capable(hdev)) - hci_dev_set_flag(hdev, HCI_LE_ENABLED); -} - -static void hci_setup_event_mask(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - - /* The second byte is 0xff instead of 0x9f (two reserved bits - * disabled) since a Broadcom 1.2 dongle doesn't respond to the - * command otherwise. - */ - u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 }; - - /* CSR 1.1 dongles does not accept any bitfield so don't try to set - * any event mask for pre 1.2 devices. - */ - if (hdev->hci_ver < BLUETOOTH_VER_1_2) - return; - - if (lmp_bredr_capable(hdev)) { - events[4] |= 0x01; /* Flow Specification Complete */ - } else { - /* Use a different default for LE-only devices */ - memset(events, 0, sizeof(events)); - events[1] |= 0x20; /* Command Complete */ - events[1] |= 0x40; /* Command Status */ - events[1] |= 0x80; /* Hardware Error */ - - /* If the controller supports the Disconnect command, enable - * the corresponding event. In addition enable packet flow - * control related events. - */ - if (hdev->commands[0] & 0x20) { - events[0] |= 0x10; /* Disconnection Complete */ - events[2] |= 0x04; /* Number of Completed Packets */ - events[3] |= 0x02; /* Data Buffer Overflow */ - } - - /* If the controller supports the Read Remote Version - * Information command, enable the corresponding event. - */ - if (hdev->commands[2] & 0x80) - events[1] |= 0x08; /* Read Remote Version Information - * Complete - */ - - if (hdev->le_features[0] & HCI_LE_ENCRYPTION) { - events[0] |= 0x80; /* Encryption Change */ - events[5] |= 0x80; /* Encryption Key Refresh Complete */ - } - } - - if (lmp_inq_rssi_capable(hdev) || - test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) - events[4] |= 0x02; /* Inquiry Result with RSSI */ - - if (lmp_ext_feat_capable(hdev)) - events[4] |= 0x04; /* Read Remote Extended Features Complete */ - - if (lmp_esco_capable(hdev)) { - events[5] |= 0x08; /* Synchronous Connection Complete */ - events[5] |= 0x10; /* Synchronous Connection Changed */ - } - - if (lmp_sniffsubr_capable(hdev)) - events[5] |= 0x20; /* Sniff Subrating */ - - if (lmp_pause_enc_capable(hdev)) - events[5] |= 0x80; /* Encryption Key Refresh Complete */ - - if (lmp_ext_inq_capable(hdev)) - events[5] |= 0x40; /* Extended Inquiry Result */ - - if (lmp_no_flush_capable(hdev)) - events[7] |= 0x01; /* Enhanced Flush Complete */ - - if (lmp_lsto_capable(hdev)) - events[6] |= 0x80; /* Link Supervision Timeout Changed */ - - if (lmp_ssp_capable(hdev)) { - events[6] |= 0x01; /* IO Capability Request */ - events[6] |= 0x02; /* IO Capability Response */ - events[6] |= 0x04; /* User Confirmation Request */ - events[6] |= 0x08; /* User Passkey Request */ - events[6] |= 0x10; /* Remote OOB Data Request */ - events[6] |= 0x20; /* Simple Pairing Complete */ - events[7] |= 0x04; /* User Passkey Notification */ - events[7] |= 0x08; /* Keypress Notification */ - events[7] |= 0x10; /* Remote Host Supported - * Features Notification - */ - } - - if (lmp_le_capable(hdev)) - events[7] |= 0x20; /* LE Meta-Event */ - - hci_req_add(req, HCI_OP_SET_EVENT_MASK, sizeof(events), events); -} - -static int hci_init2_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - - if (hdev->dev_type == HCI_AMP) - return amp_init2(req); - - if (lmp_bredr_capable(hdev)) - bredr_setup(req); - else - hci_dev_clear_flag(hdev, HCI_BREDR_ENABLED); - - if (lmp_le_capable(hdev)) - le_setup(req); - - /* All Bluetooth 1.2 and later controllers should support the - * HCI command for reading the local supported commands. - * - * Unfortunately some controllers indicate Bluetooth 1.2 support, - * but do not have support for this command. If that is the case, - * the driver can quirk the behavior and skip reading the local - * supported commands. - */ - if (hdev->hci_ver > BLUETOOTH_VER_1_1 && - !test_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks)) - hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL); - - if (lmp_ssp_capable(hdev)) { - /* When SSP is available, then the host features page - * should also be available as well. However some - * controllers list the max_page as 0 as long as SSP - * has not been enabled. To achieve proper debugging - * output, force the minimum max_page to 1 at least. - */ - hdev->max_page = 0x01; - - if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) { - u8 mode = 0x01; - - hci_req_add(req, HCI_OP_WRITE_SSP_MODE, - sizeof(mode), &mode); - } else { - struct hci_cp_write_eir cp; - - memset(hdev->eir, 0, sizeof(hdev->eir)); - memset(&cp, 0, sizeof(cp)); - - hci_req_add(req, HCI_OP_WRITE_EIR, sizeof(cp), &cp); - } - } - - if (lmp_inq_rssi_capable(hdev) || - test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) { - u8 mode; - - /* If Extended Inquiry Result events are supported, then - * they are clearly preferred over Inquiry Result with RSSI - * events. - */ - mode = lmp_ext_inq_capable(hdev) ? 0x02 : 0x01; - - hci_req_add(req, HCI_OP_WRITE_INQUIRY_MODE, 1, &mode); - } - - if (lmp_inq_tx_pwr_capable(hdev)) - hci_req_add(req, HCI_OP_READ_INQ_RSP_TX_POWER, 0, NULL); - - if (lmp_ext_feat_capable(hdev)) { - struct hci_cp_read_local_ext_features cp; - - cp.page = 0x01; - hci_req_add(req, HCI_OP_READ_LOCAL_EXT_FEATURES, - sizeof(cp), &cp); - } - - if (hci_dev_test_flag(hdev, HCI_LINK_SECURITY)) { - u8 enable = 1; - hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE, sizeof(enable), - &enable); - } - - return 0; -} - -static void hci_setup_link_policy(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - struct hci_cp_write_def_link_policy cp; - u16 link_policy = 0; - - if (lmp_rswitch_capable(hdev)) - link_policy |= HCI_LP_RSWITCH; - if (lmp_hold_capable(hdev)) - link_policy |= HCI_LP_HOLD; - if (lmp_sniff_capable(hdev)) - link_policy |= HCI_LP_SNIFF; - if (lmp_park_capable(hdev)) - link_policy |= HCI_LP_PARK; - - cp.policy = cpu_to_le16(link_policy); - hci_req_add(req, HCI_OP_WRITE_DEF_LINK_POLICY, sizeof(cp), &cp); -} - -static void hci_set_le_support(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - struct hci_cp_write_le_host_supported cp; - - /* LE-only devices do not support explicit enablement */ - if (!lmp_bredr_capable(hdev)) - return; - - memset(&cp, 0, sizeof(cp)); - - if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) { - cp.le = 0x01; - cp.simul = 0x00; - } - - if (cp.le != lmp_host_le_capable(hdev)) - hci_req_add(req, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(cp), - &cp); -} - -static void hci_set_event_mask_page_2(struct hci_request *req) -{ - struct hci_dev *hdev = req->hdev; - u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - bool changed = false; - - /* If Connectionless Peripheral Broadcast central role is supported - * enable all necessary events for it. - */ - if (lmp_cpb_central_capable(hdev)) { - events[1] |= 0x40; /* Triggered Clock Capture */ - events[1] |= 0x80; /* Synchronization Train Complete */ - events[2] |= 0x10; /* Peripheral Page Response Timeout */ - events[2] |= 0x20; /* CPB Channel Map Change */ - changed = true; - } - - /* If Connectionless Peripheral Broadcast peripheral role is supported - * enable all necessary events for it. - */ - if (lmp_cpb_peripheral_capable(hdev)) { - events[2] |= 0x01; /* Synchronization Train Received */ - events[2] |= 0x02; /* CPB Receive */ - events[2] |= 0x04; /* CPB Timeout */ - events[2] |= 0x08; /* Truncated Page Complete */ - changed = true; - } - - /* Enable Authenticated Payload Timeout Expired event if supported */ - if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { - events[2] |= 0x80; - changed = true; - } - - /* Some Broadcom based controllers indicate support for Set Event - * Mask Page 2 command, but then actually do not support it. Since - * the default value is all bits set to zero, the command is only - * required if the event mask has to be changed. In case no change - * to the event mask is needed, skip this command. - */ - if (changed) - hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, - sizeof(events), events); -} - -static int hci_init3_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - u8 p; - - hci_setup_event_mask(req); - - if (hdev->commands[6] & 0x20 && - !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) { - struct hci_cp_read_stored_link_key cp; - - bacpy(&cp.bdaddr, BDADDR_ANY); - cp.read_all = 0x01; - hci_req_add(req, HCI_OP_READ_STORED_LINK_KEY, sizeof(cp), &cp); - } - - if (hdev->commands[5] & 0x10) - hci_setup_link_policy(req); - - if (hdev->commands[8] & 0x01) - hci_req_add(req, HCI_OP_READ_PAGE_SCAN_ACTIVITY, 0, NULL); - - if (hdev->commands[18] & 0x04 && - !test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks)) - hci_req_add(req, HCI_OP_READ_DEF_ERR_DATA_REPORTING, 0, NULL); - - /* Some older Broadcom based Bluetooth 1.2 controllers do not - * support the Read Page Scan Type command. Check support for - * this command in the bit mask of supported commands. - */ - if (hdev->commands[13] & 0x01) - hci_req_add(req, HCI_OP_READ_PAGE_SCAN_TYPE, 0, NULL); - - if (lmp_le_capable(hdev)) { - u8 events[8]; - - memset(events, 0, sizeof(events)); - - if (hdev->le_features[0] & HCI_LE_ENCRYPTION) - events[0] |= 0x10; /* LE Long Term Key Request */ - - /* If controller supports the Connection Parameters Request - * Link Layer Procedure, enable the corresponding event. - */ - if (hdev->le_features[0] & HCI_LE_CONN_PARAM_REQ_PROC) - events[0] |= 0x20; /* LE Remote Connection - * Parameter Request - */ - - /* If the controller supports the Data Length Extension - * feature, enable the corresponding event. - */ - if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) - events[0] |= 0x40; /* LE Data Length Change */ - - /* If the controller supports LL Privacy feature, enable - * the corresponding event. - */ - if (hdev->le_features[0] & HCI_LE_LL_PRIVACY) - events[1] |= 0x02; /* LE Enhanced Connection - * Complete - */ - - /* If the controller supports Extended Scanner Filter - * Policies, enable the corresponding event. - */ - if (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY) - events[1] |= 0x04; /* LE Direct Advertising - * Report - */ - - /* If the controller supports Channel Selection Algorithm #2 - * feature, enable the corresponding event. - */ - if (hdev->le_features[1] & HCI_LE_CHAN_SEL_ALG2) - events[2] |= 0x08; /* LE Channel Selection - * Algorithm - */ - - /* If the controller supports the LE Set Scan Enable command, - * enable the corresponding advertising report event. - */ - if (hdev->commands[26] & 0x08) - events[0] |= 0x02; /* LE Advertising Report */ - - /* If the controller supports the LE Create Connection - * command, enable the corresponding event. - */ - if (hdev->commands[26] & 0x10) - events[0] |= 0x01; /* LE Connection Complete */ - - /* If the controller supports the LE Connection Update - * command, enable the corresponding event. - */ - if (hdev->commands[27] & 0x04) - events[0] |= 0x04; /* LE Connection Update - * Complete - */ - - /* If the controller supports the LE Read Remote Used Features - * command, enable the corresponding event. - */ - if (hdev->commands[27] & 0x20) - events[0] |= 0x08; /* LE Read Remote Used - * Features Complete - */ - - /* If the controller supports the LE Read Local P-256 - * Public Key command, enable the corresponding event. - */ - if (hdev->commands[34] & 0x02) - events[0] |= 0x80; /* LE Read Local P-256 - * Public Key Complete - */ - - /* If the controller supports the LE Generate DHKey - * command, enable the corresponding event. - */ - if (hdev->commands[34] & 0x04) - events[1] |= 0x01; /* LE Generate DHKey Complete */ - - /* If the controller supports the LE Set Default PHY or - * LE Set PHY commands, enable the corresponding event. - */ - if (hdev->commands[35] & (0x20 | 0x40)) - events[1] |= 0x08; /* LE PHY Update Complete */ - - /* If the controller supports LE Set Extended Scan Parameters - * and LE Set Extended Scan Enable commands, enable the - * corresponding event. - */ - if (use_ext_scan(hdev)) - events[1] |= 0x10; /* LE Extended Advertising - * Report - */ - - /* If the controller supports the LE Extended Advertising - * command, enable the corresponding event. - */ - if (ext_adv_capable(hdev)) - events[2] |= 0x02; /* LE Advertising Set - * Terminated - */ - - hci_req_add(req, HCI_OP_LE_SET_EVENT_MASK, sizeof(events), - events); - - /* Read LE Advertising Channel TX Power */ - if ((hdev->commands[25] & 0x40) && !ext_adv_capable(hdev)) { - /* HCI TS spec forbids mixing of legacy and extended - * advertising commands wherein READ_ADV_TX_POWER is - * also included. So do not call it if extended adv - * is supported otherwise controller will return - * COMMAND_DISALLOWED for extended commands. - */ - hci_req_add(req, HCI_OP_LE_READ_ADV_TX_POWER, 0, NULL); - } - - if (hdev->commands[38] & 0x80) { - /* Read LE Min/Max Tx Power*/ - hci_req_add(req, HCI_OP_LE_READ_TRANSMIT_POWER, - 0, NULL); - } - - if (hdev->commands[26] & 0x40) { - /* Read LE Accept List Size */ - hci_req_add(req, HCI_OP_LE_READ_ACCEPT_LIST_SIZE, - 0, NULL); - } - - if (hdev->commands[26] & 0x80) { - /* Clear LE Accept List */ - hci_req_add(req, HCI_OP_LE_CLEAR_ACCEPT_LIST, 0, NULL); - } - - if (hdev->commands[34] & 0x40) { - /* Read LE Resolving List Size */ - hci_req_add(req, HCI_OP_LE_READ_RESOLV_LIST_SIZE, - 0, NULL); - } - - if (hdev->commands[34] & 0x20) { - /* Clear LE Resolving List */ - hci_req_add(req, HCI_OP_LE_CLEAR_RESOLV_LIST, 0, NULL); - } - - if (hdev->commands[35] & 0x04) { - __le16 rpa_timeout = cpu_to_le16(hdev->rpa_timeout); - - /* Set RPA timeout */ - hci_req_add(req, HCI_OP_LE_SET_RPA_TIMEOUT, 2, - &rpa_timeout); - } - - if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) { - /* Read LE Maximum Data Length */ - hci_req_add(req, HCI_OP_LE_READ_MAX_DATA_LEN, 0, NULL); - - /* Read LE Suggested Default Data Length */ - hci_req_add(req, HCI_OP_LE_READ_DEF_DATA_LEN, 0, NULL); - } - - if (ext_adv_capable(hdev)) { - /* Read LE Number of Supported Advertising Sets */ - hci_req_add(req, HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS, - 0, NULL); - } - - hci_set_le_support(req); - } - - /* Read features beyond page 1 if available */ - for (p = 2; p < HCI_MAX_PAGES && p <= hdev->max_page; p++) { - struct hci_cp_read_local_ext_features cp; - - cp.page = p; - hci_req_add(req, HCI_OP_READ_LOCAL_EXT_FEATURES, - sizeof(cp), &cp); - } - - return 0; -} - -static int hci_init4_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - - /* Some Broadcom based Bluetooth controllers do not support the - * Delete Stored Link Key command. They are clearly indicating its - * absence in the bit mask of supported commands. - * - * Check the supported commands and only if the command is marked - * as supported send it. If not supported assume that the controller - * does not have actual support for stored link keys which makes this - * command redundant anyway. - * - * Some controllers indicate that they support handling deleting - * stored link keys, but they don't. The quirk lets a driver - * just disable this command. - */ - if (hdev->commands[6] & 0x80 && - !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) { - struct hci_cp_delete_stored_link_key cp; - - bacpy(&cp.bdaddr, BDADDR_ANY); - cp.delete_all = 0x01; - hci_req_add(req, HCI_OP_DELETE_STORED_LINK_KEY, - sizeof(cp), &cp); - } - - /* Set event mask page 2 if the HCI command for it is supported */ - if (hdev->commands[22] & 0x04) - hci_set_event_mask_page_2(req); - - /* Read local pairing options if the HCI command is supported */ - if (hdev->commands[41] & 0x08) - hci_req_add(req, HCI_OP_READ_LOCAL_PAIRING_OPTS, 0, NULL); - - /* Get MWS transport configuration if the HCI command is supported */ - if (hdev->commands[30] & 0x08) - hci_req_add(req, HCI_OP_GET_MWS_TRANSPORT_CONFIG, 0, NULL); - - /* Check for Synchronization Train support */ - if (lmp_sync_train_capable(hdev)) - hci_req_add(req, HCI_OP_READ_SYNC_TRAIN_PARAMS, 0, NULL); - - /* Enable Secure Connections if supported and configured */ - if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED) && - bredr_sc_enabled(hdev)) { - u8 support = 0x01; - - hci_req_add(req, HCI_OP_WRITE_SC_SUPPORT, - sizeof(support), &support); - } - - /* Set erroneous data reporting if supported to the wideband speech - * setting value - */ - if (hdev->commands[18] & 0x08 && - !test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks)) { - bool enabled = hci_dev_test_flag(hdev, - HCI_WIDEBAND_SPEECH_ENABLED); - - if (enabled != - (hdev->err_data_reporting == ERR_DATA_REPORTING_ENABLED)) { - struct hci_cp_write_def_err_data_reporting cp; - - cp.err_data_reporting = enabled ? - ERR_DATA_REPORTING_ENABLED : - ERR_DATA_REPORTING_DISABLED; - - hci_req_add(req, HCI_OP_WRITE_DEF_ERR_DATA_REPORTING, - sizeof(cp), &cp); - } - } - - /* Set Suggested Default Data Length to maximum if supported */ - if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) { - struct hci_cp_le_write_def_data_len cp; - - cp.tx_len = cpu_to_le16(hdev->le_max_tx_len); - cp.tx_time = cpu_to_le16(hdev->le_max_tx_time); - hci_req_add(req, HCI_OP_LE_WRITE_DEF_DATA_LEN, sizeof(cp), &cp); - } - - /* Set Default PHY parameters if command is supported */ - if (hdev->commands[35] & 0x20) { - struct hci_cp_le_set_default_phy cp; - - cp.all_phys = 0x00; - cp.tx_phys = hdev->le_tx_def_phys; - cp.rx_phys = hdev->le_rx_def_phys; - - hci_req_add(req, HCI_OP_LE_SET_DEFAULT_PHY, sizeof(cp), &cp); - } - - return 0; -} - -static int __hci_init(struct hci_dev *hdev) -{ - int err; - - err = __hci_req_sync(hdev, hci_init1_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - if (hci_dev_test_flag(hdev, HCI_SETUP)) - hci_debugfs_create_basic(hdev); - - err = __hci_req_sync(hdev, hci_init2_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - /* HCI_PRIMARY covers both single-mode LE, BR/EDR and dual-mode - * BR/EDR/LE type controllers. AMP controllers only need the - * first two stages of init. - */ - if (hdev->dev_type != HCI_PRIMARY) - return 0; - - err = __hci_req_sync(hdev, hci_init3_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - err = __hci_req_sync(hdev, hci_init4_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - /* Read local codec list if the HCI command is supported */ - if (hdev->commands[45] & 0x04) - hci_read_supported_codecs_v2(hdev); - else if (hdev->commands[29] & 0x20) - hci_read_supported_codecs(hdev); - - /* This function is only called when the controller is actually in - * configured state. When the controller is marked as unconfigured, - * this initialization procedure is not run. - * - * It means that it is possible that a controller runs through its - * setup phase and then discovers missing settings. If that is the - * case, then this function will not be called. It then will only - * be called during the config phase. - * - * So only when in setup phase or config phase, create the debugfs - * entries and register the SMP channels. - */ - if (!hci_dev_test_flag(hdev, HCI_SETUP) && - !hci_dev_test_flag(hdev, HCI_CONFIG)) - return 0; - - hci_debugfs_create_common(hdev); - - if (lmp_bredr_capable(hdev)) - hci_debugfs_create_bredr(hdev); - - if (lmp_le_capable(hdev)) - hci_debugfs_create_le(hdev); - - return 0; -} - -static int hci_init0_req(struct hci_request *req, unsigned long opt) -{ - struct hci_dev *hdev = req->hdev; - - BT_DBG("%s %ld", hdev->name, opt); - - /* Reset */ - if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) - hci_reset_req(req, 0); - - /* Read Local Version */ - hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); - - /* Read BD Address */ - if (hdev->set_bdaddr) - hci_req_add(req, HCI_OP_READ_BD_ADDR, 0, NULL); - - return 0; -} - -static int __hci_unconf_init(struct hci_dev *hdev) -{ - int err; - - if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) - return 0; - - err = __hci_req_sync(hdev, hci_init0_req, 0, HCI_INIT_TIMEOUT, NULL); - if (err < 0) - return err; - - if (hci_dev_test_flag(hdev, HCI_SETUP)) - hci_debugfs_create_basic(hdev); - - return 0; -} - static int hci_scan_req(struct hci_request *req, unsigned long opt) { __u8 scan = opt; @@ -1289,240 +471,6 @@ done: return err; } -/** - * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device Address - * (BD_ADDR) for a HCI device from - * a firmware node property. - * @hdev: The HCI device - * - * Search the firmware node for 'local-bd-address'. - * - * All-zero BD addresses are rejected, because those could be properties - * that exist in the firmware tables, but were not updated by the firmware. For - * example, the DTS could define 'local-bd-address', with zero BD addresses. - */ -static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev) -{ - struct fwnode_handle *fwnode = dev_fwnode(hdev->dev.parent); - bdaddr_t ba; - int ret; - - ret = fwnode_property_read_u8_array(fwnode, "local-bd-address", - (u8 *)&ba, sizeof(ba)); - if (ret < 0 || !bacmp(&ba, BDADDR_ANY)) - return; - - bacpy(&hdev->public_addr, &ba); -} - -/* TODO: Move this function into hci_sync.c */ -int hci_dev_open_sync(struct hci_dev *hdev) -{ - int ret = 0; - - BT_DBG("%s %p", hdev->name, hdev); - - if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) { - ret = -ENODEV; - goto done; - } - - if (!hci_dev_test_flag(hdev, HCI_SETUP) && - !hci_dev_test_flag(hdev, HCI_CONFIG)) { - /* Check for rfkill but allow the HCI setup stage to - * proceed (which in itself doesn't cause any RF activity). - */ - if (hci_dev_test_flag(hdev, HCI_RFKILLED)) { - ret = -ERFKILL; - goto done; - } - - /* Check for valid public address or a configured static - * random address, but let the HCI setup proceed to - * be able to determine if there is a public address - * or not. - * - * In case of user channel usage, it is not important - * if a public address or static random address is - * available. - * - * This check is only valid for BR/EDR controllers - * since AMP controllers do not have an address. - */ - if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - hdev->dev_type == HCI_PRIMARY && - !bacmp(&hdev->bdaddr, BDADDR_ANY) && - !bacmp(&hdev->static_addr, BDADDR_ANY)) { - ret = -EADDRNOTAVAIL; - goto done; - } - } - - if (test_bit(HCI_UP, &hdev->flags)) { - ret = -EALREADY; - goto done; - } - - if (hdev->open(hdev)) { - ret = -EIO; - goto done; - } - - set_bit(HCI_RUNNING, &hdev->flags); - hci_sock_dev_event(hdev, HCI_DEV_OPEN); - - atomic_set(&hdev->cmd_cnt, 1); - set_bit(HCI_INIT, &hdev->flags); - - if (hci_dev_test_flag(hdev, HCI_SETUP) || - test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks)) { - bool invalid_bdaddr; - - hci_sock_dev_event(hdev, HCI_DEV_SETUP); - - if (hdev->setup) - ret = hdev->setup(hdev); - - /* The transport driver can set the quirk to mark the - * BD_ADDR invalid before creating the HCI device or in - * its setup callback. - */ - invalid_bdaddr = test_bit(HCI_QUIRK_INVALID_BDADDR, - &hdev->quirks); - - if (ret) - goto setup_failed; - - if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) { - if (!bacmp(&hdev->public_addr, BDADDR_ANY)) - hci_dev_get_bd_addr_from_property(hdev); - - if (bacmp(&hdev->public_addr, BDADDR_ANY) && - hdev->set_bdaddr) { - ret = hdev->set_bdaddr(hdev, - &hdev->public_addr); - - /* If setting of the BD_ADDR from the device - * property succeeds, then treat the address - * as valid even if the invalid BD_ADDR - * quirk indicates otherwise. - */ - if (!ret) - invalid_bdaddr = false; - } - } - -setup_failed: - /* The transport driver can set these quirks before - * creating the HCI device or in its setup callback. - * - * For the invalid BD_ADDR quirk it is possible that - * it becomes a valid address if the bootloader does - * provide it (see above). - * - * In case any of them is set, the controller has to - * start up as unconfigured. - */ - if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) || - invalid_bdaddr) - hci_dev_set_flag(hdev, HCI_UNCONFIGURED); - - /* For an unconfigured controller it is required to - * read at least the version information provided by - * the Read Local Version Information command. - * - * If the set_bdaddr driver callback is provided, then - * also the original Bluetooth public device address - * will be read using the Read BD Address command. - */ - if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) - ret = __hci_unconf_init(hdev); - } - - if (hci_dev_test_flag(hdev, HCI_CONFIG)) { - /* If public address change is configured, ensure that - * the address gets programmed. If the driver does not - * support changing the public address, fail the power - * on procedure. - */ - if (bacmp(&hdev->public_addr, BDADDR_ANY) && - hdev->set_bdaddr) - ret = hdev->set_bdaddr(hdev, &hdev->public_addr); - else - ret = -EADDRNOTAVAIL; - } - - if (!ret) { - if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { - ret = __hci_init(hdev); - if (!ret && hdev->post_init) - ret = hdev->post_init(hdev); - } - } - - /* If the HCI Reset command is clearing all diagnostic settings, - * then they need to be reprogrammed after the init procedure - * completed. - */ - if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - hci_dev_test_flag(hdev, HCI_VENDOR_DIAG) && hdev->set_diag) - ret = hdev->set_diag(hdev, true); - - msft_do_open(hdev); - aosp_do_open(hdev); - - clear_bit(HCI_INIT, &hdev->flags); - - if (!ret) { - hci_dev_hold(hdev); - hci_dev_set_flag(hdev, HCI_RPA_EXPIRED); - hci_adv_instances_set_rpa_expired(hdev, true); - set_bit(HCI_UP, &hdev->flags); - hci_sock_dev_event(hdev, HCI_DEV_UP); - hci_leds_update_powered(hdev, true); - if (!hci_dev_test_flag(hdev, HCI_SETUP) && - !hci_dev_test_flag(hdev, HCI_CONFIG) && - !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - hci_dev_test_flag(hdev, HCI_MGMT) && - hdev->dev_type == HCI_PRIMARY) { - ret = hci_powered_update_sync(hdev); - } - } else { - /* Init failed, cleanup */ - flush_work(&hdev->tx_work); - - /* Since hci_rx_work() is possible to awake new cmd_work - * it should be flushed first to avoid unexpected call of - * hci_cmd_work() - */ - flush_work(&hdev->rx_work); - flush_work(&hdev->cmd_work); - - skb_queue_purge(&hdev->cmd_q); - skb_queue_purge(&hdev->rx_q); - - if (hdev->flush) - hdev->flush(hdev); - - if (hdev->sent_cmd) { - kfree_skb(hdev->sent_cmd); - hdev->sent_cmd = NULL; - } - - clear_bit(HCI_RUNNING, &hdev->flags); - hci_sock_dev_event(hdev, HCI_DEV_CLOSE); - - hdev->close(hdev); - hdev->flags &= BIT(HCI_RAW); - } - -done: - return ret; -} - static int hci_dev_do_open(struct hci_dev *hdev) { int ret = 0; @@ -1594,155 +542,6 @@ done: return err; } -/* This function requires the caller holds hdev->lock */ -static void hci_pend_le_actions_clear(struct hci_dev *hdev) -{ - struct hci_conn_params *p; - - list_for_each_entry(p, &hdev->le_conn_params, list) { - if (p->conn) { - hci_conn_drop(p->conn); - hci_conn_put(p->conn); - p->conn = NULL; - } - list_del_init(&p->action); - } - - BT_DBG("All LE pending actions cleared"); -} - -/* TODO: Move this function into hci_sync.c */ -int hci_dev_close_sync(struct hci_dev *hdev) -{ - bool auto_off; - int err = 0; - - BT_DBG("%s %p", hdev->name, hdev); - - cancel_delayed_work(&hdev->power_off); - cancel_delayed_work(&hdev->ncmd_timer); - - hci_request_cancel_all(hdev); - - if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - test_bit(HCI_UP, &hdev->flags)) { - /* Execute vendor specific shutdown routine */ - if (hdev->shutdown) - err = hdev->shutdown(hdev); - } - - if (!test_and_clear_bit(HCI_UP, &hdev->flags)) { - cancel_delayed_work_sync(&hdev->cmd_timer); - return err; - } - - hci_leds_update_powered(hdev, false); - - /* Flush RX and TX works */ - flush_work(&hdev->tx_work); - flush_work(&hdev->rx_work); - - if (hdev->discov_timeout > 0) { - hdev->discov_timeout = 0; - hci_dev_clear_flag(hdev, HCI_DISCOVERABLE); - hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); - } - - if (hci_dev_test_and_clear_flag(hdev, HCI_SERVICE_CACHE)) - cancel_delayed_work(&hdev->service_cache); - - if (hci_dev_test_flag(hdev, HCI_MGMT)) { - struct adv_info *adv_instance; - - cancel_delayed_work_sync(&hdev->rpa_expired); - - list_for_each_entry(adv_instance, &hdev->adv_instances, list) - cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); - } - - /* Avoid potential lockdep warnings from the *_flush() calls by - * ensuring the workqueue is empty up front. - */ - drain_workqueue(hdev->workqueue); - - hci_dev_lock(hdev); - - hci_discovery_set_state(hdev, DISCOVERY_STOPPED); - - auto_off = hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF); - - if (!auto_off && hdev->dev_type == HCI_PRIMARY && - !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && - hci_dev_test_flag(hdev, HCI_MGMT)) - __mgmt_power_off(hdev); - - hci_inquiry_cache_flush(hdev); - hci_pend_le_actions_clear(hdev); - hci_conn_hash_flush(hdev); - hci_dev_unlock(hdev); - - smp_unregister(hdev); - - hci_sock_dev_event(hdev, HCI_DEV_DOWN); - - aosp_do_close(hdev); - msft_do_close(hdev); - - if (hdev->flush) - hdev->flush(hdev); - - /* Reset device */ - skb_queue_purge(&hdev->cmd_q); - atomic_set(&hdev->cmd_cnt, 1); - if (test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks) && - !auto_off && !hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { - set_bit(HCI_INIT, &hdev->flags); - __hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT, NULL); - clear_bit(HCI_INIT, &hdev->flags); - } - - /* flush cmd work */ - flush_work(&hdev->cmd_work); - - /* Drop queues */ - skb_queue_purge(&hdev->rx_q); - skb_queue_purge(&hdev->cmd_q); - skb_queue_purge(&hdev->raw_q); - - /* Drop last sent command */ - if (hdev->sent_cmd) { - cancel_delayed_work_sync(&hdev->cmd_timer); - kfree_skb(hdev->sent_cmd); - hdev->sent_cmd = NULL; - } - - clear_bit(HCI_RUNNING, &hdev->flags); - hci_sock_dev_event(hdev, HCI_DEV_CLOSE); - - if (test_and_clear_bit(SUSPEND_POWERING_DOWN, hdev->suspend_tasks)) - wake_up(&hdev->suspend_wait_q); - - /* After this point our queues are empty - * and no tasks are scheduled. */ - hdev->close(hdev); - - /* Clear flags */ - hdev->flags &= BIT(HCI_RAW); - hci_dev_clear_volatile_flags(hdev); - - /* Controller radio is available but is currently powered down */ - hdev->amp_status = AMP_STATUS_POWERED_DOWN; - - memset(hdev->eir, 0, sizeof(hdev->eir)); - memset(hdev->dev_class, 0, sizeof(hdev->dev_class)); - bacpy(&hdev->random_addr, BDADDR_ANY); - hci_codec_list_clear(&hdev->local_codecs); - - hci_dev_put(hdev); - return err; -} - int hci_dev_do_close(struct hci_dev *hdev) { int err; @@ -1810,7 +609,7 @@ static int hci_dev_do_reset(struct hci_dev *hdev) atomic_set(&hdev->cmd_cnt, 1); hdev->acl_cnt = 0; hdev->sco_cnt = 0; hdev->le_cnt = 0; - ret = __hci_req_sync(hdev, hci_reset_req, 0, HCI_INIT_TIMEOUT, NULL); + ret = hci_reset_sync(hdev); hci_req_sync_unlock(hdev); return ret; |