summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/hdmi.h4
-rw-r--r--include/media/cec.h154
-rw-r--r--include/media/media-entity.h48
-rw-r--r--include/media/rc-core.h11
-rw-r--r--include/media/rcar-fcp.h6
-rw-r--r--include/media/v4l2-async.h111
-rw-r--r--include/media/v4l2-common.h14
-rw-r--r--include/media/v4l2-ctrls.h26
-rw-r--r--include/media/v4l2-dv-timings.h17
-rw-r--r--include/media/v4l2-fwnode.h141
-rw-r--r--include/media/v4l2-mc.h78
-rw-r--r--include/media/v4l2-mediabus.h40
-rw-r--r--include/media/v4l2-rect.h26
-rw-r--r--include/media/vsp1.h8
-rw-r--r--include/uapi/linux/cec.h3
-rw-r--r--include/uapi/linux/videodev2.h31
16 files changed, 450 insertions, 268 deletions
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index d271ff23984f..4f3febc0f971 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -101,8 +101,8 @@ enum hdmi_extended_colorimetry {
HDMI_EXTENDED_COLORIMETRY_XV_YCC_601,
HDMI_EXTENDED_COLORIMETRY_XV_YCC_709,
HDMI_EXTENDED_COLORIMETRY_S_YCC_601,
- HDMI_EXTENDED_COLORIMETRY_ADOBE_YCC_601,
- HDMI_EXTENDED_COLORIMETRY_ADOBE_RGB,
+ HDMI_EXTENDED_COLORIMETRY_OPYCC_601,
+ HDMI_EXTENDED_COLORIMETRY_OPRGB,
/* The following EC values are only defined in CEA-861-F. */
HDMI_EXTENDED_COLORIMETRY_BT2020_CONST_LUM,
diff --git a/include/media/cec.h b/include/media/cec.h
index ff9847f7f99d..3fe5e5d2bb7e 100644
--- a/include/media/cec.h
+++ b/include/media/cec.h
@@ -63,7 +63,6 @@ struct cec_data {
struct delayed_work work;
struct completion c;
u8 attempts;
- bool new_initiator;
bool blocking;
bool completed;
};
@@ -174,6 +173,7 @@ struct cec_adapter {
bool is_configuring;
bool is_configured;
bool cec_pin_is_high;
+ u8 last_initiator;
u32 monitor_all_cnt;
u32 monitor_pin_cnt;
u32 follower_cnt;
@@ -198,9 +198,7 @@ struct cec_adapter {
u16 phys_addrs[15];
u32 sequence;
- char device_name[32];
char input_phys[32];
- char input_drv[32];
};
static inline void *cec_get_drvdata(const struct cec_adapter *adap)
@@ -332,67 +330,6 @@ void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts);
u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
unsigned int *offset);
-/**
- * cec_set_edid_phys_addr() - find and set the physical address
- *
- * @edid: pointer to the EDID data
- * @size: size in bytes of the EDID data
- * @phys_addr: the new physical address
- *
- * This function finds the location of the physical address in the EDID
- * and fills in the given physical address and updates the checksum
- * at the end of the EDID block. It does nothing if the EDID doesn't
- * contain a physical address.
- */
-void cec_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr);
-
-/**
- * cec_phys_addr_for_input() - calculate the PA for an input
- *
- * @phys_addr: the physical address of the parent
- * @input: the number of the input port, must be between 1 and 15
- *
- * This function calculates a new physical address based on the input
- * port number. For example:
- *
- * PA = 0.0.0.0 and input = 2 becomes 2.0.0.0
- *
- * PA = 3.0.0.0 and input = 1 becomes 3.1.0.0
- *
- * PA = 3.2.1.0 and input = 5 becomes 3.2.1.5
- *
- * PA = 3.2.1.3 and input = 5 becomes f.f.f.f since it maxed out the depth.
- *
- * Return: the new physical address or CEC_PHYS_ADDR_INVALID.
- */
-u16 cec_phys_addr_for_input(u16 phys_addr, u8 input);
-
-/**
- * cec_phys_addr_validate() - validate a physical address from an EDID
- *
- * @phys_addr: the physical address to validate
- * @parent: if not %NULL, then this is filled with the parents PA.
- * @port: if not %NULL, then this is filled with the input port.
- *
- * This validates a physical address as read from an EDID. If the
- * PA is invalid (such as 1.0.1.0 since '0' is only allowed at the end),
- * then it will return -EINVAL.
- *
- * The parent PA is passed into %parent and the input port is passed into
- * %port. For example:
- *
- * PA = 0.0.0.0: has parent 0.0.0.0 and input port 0.
- *
- * PA = 1.0.0.0: has parent 0.0.0.0 and input port 1.
- *
- * PA = 3.2.0.0: has parent 3.0.0.0 and input port 2.
- *
- * PA = f.f.f.f: has parent f.f.f.f and input port 0.
- *
- * Return: 0 if the PA is valid, -EINVAL if not.
- */
-int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port);
-
#else
static inline int cec_register_adapter(struct cec_adapter *adap,
@@ -427,25 +364,6 @@ static inline u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
return CEC_PHYS_ADDR_INVALID;
}
-static inline void cec_set_edid_phys_addr(u8 *edid, unsigned int size,
- u16 phys_addr)
-{
-}
-
-static inline u16 cec_phys_addr_for_input(u16 phys_addr, u8 input)
-{
- return CEC_PHYS_ADDR_INVALID;
-}
-
-static inline int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port)
-{
- if (parent)
- *parent = phys_addr;
- if (port)
- *port = 0;
- return 0;
-}
-
#endif
/**
@@ -461,4 +379,74 @@ static inline void cec_phys_addr_invalidate(struct cec_adapter *adap)
cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false);
}
+/**
+ * cec_get_edid_spa_location() - find location of the Source Physical Address
+ *
+ * @edid: the EDID
+ * @size: the size of the EDID
+ *
+ * This EDID is expected to be a CEA-861 compliant, which means that there are
+ * at least two blocks and one or more of the extensions blocks are CEA-861
+ * blocks.
+ *
+ * The returned location is guaranteed to be <= size-2.
+ *
+ * This is an inline function since it is used by both CEC and V4L2.
+ * Ideally this would go in a module shared by both, but it is overkill to do
+ * that for just a single function.
+ */
+static inline unsigned int cec_get_edid_spa_location(const u8 *edid,
+ unsigned int size)
+{
+ unsigned int blocks = size / 128;
+ unsigned int block;
+ u8 d;
+
+ /* Sanity check: at least 2 blocks and a multiple of the block size */
+ if (blocks < 2 || size % 128)
+ return 0;
+
+ /*
+ * If there are fewer extension blocks than the size, then update
+ * 'blocks'. It is allowed to have more extension blocks than the size,
+ * since some hardware can only read e.g. 256 bytes of the EDID, even
+ * though more blocks are present. The first CEA-861 extension block
+ * should normally be in block 1 anyway.
+ */
+ if (edid[0x7e] + 1 < blocks)
+ blocks = edid[0x7e] + 1;
+
+ for (block = 1; block < blocks; block++) {
+ unsigned int offset = block * 128;
+
+ /* Skip any non-CEA-861 extension blocks */
+ if (edid[offset] != 0x02 || edid[offset + 1] != 0x03)
+ continue;
+
+ /* search Vendor Specific Data Block (tag 3) */
+ d = edid[offset + 2] & 0x7f;
+ /* Check if there are Data Blocks */
+ if (d <= 4)
+ continue;
+ if (d > 4) {
+ unsigned int i = offset + 4;
+ unsigned int end = offset + d;
+
+ /* Note: 'end' is always < 'size' */
+ do {
+ u8 tag = edid[i] >> 5;
+ u8 len = edid[i] & 0x1f;
+
+ if (tag == 3 && len >= 5 && i + len <= end &&
+ edid[i + 1] == 0x03 &&
+ edid[i + 2] == 0x0c &&
+ edid[i + 3] == 0x00)
+ return i + 4;
+ i += len + 1;
+ } while (i < end);
+ }
+ }
+ return 0;
+}
+
#endif /* _MEDIA_CEC_H */
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 3aa3d58d1d58..e5f6960d92f6 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -156,11 +156,40 @@ struct media_link {
};
/**
+ * enum media_pad_signal_type - type of the signal inside a media pad
+ *
+ * @PAD_SIGNAL_DEFAULT:
+ * Default signal. Use this when all inputs or all outputs are
+ * uniquely identified by the pad number.
+ * @PAD_SIGNAL_ANALOG:
+ * The pad contains an analog signal. It can be Radio Frequency,
+ * Intermediate Frequency, a baseband signal or sub-cariers.
+ * Tuner inputs, IF-PLL demodulators, composite and s-video signals
+ * should use it.
+ * @PAD_SIGNAL_DV:
+ * Contains a digital video signal, with can be a bitstream of samples
+ * taken from an analog TV video source. On such case, it usually
+ * contains the VBI data on it.
+ * @PAD_SIGNAL_AUDIO:
+ * Contains an Intermediate Frequency analog signal from an audio
+ * sub-carrier or an audio bitstream. IF signals are provided by tuners
+ * and consumed by audio AM/FM decoders. Bitstream audio is provided by
+ * an audio decoder.
+ */
+enum media_pad_signal_type {
+ PAD_SIGNAL_DEFAULT = 0,
+ PAD_SIGNAL_ANALOG,
+ PAD_SIGNAL_DV,
+ PAD_SIGNAL_AUDIO,
+};
+
+/**
* struct media_pad - A media pad graph object.
*
* @graph_obj: Embedded structure containing the media object common data
* @entity: Entity this pad belongs to
* @index: Pad index in the entity pads array, numbered from 0 to n
+ * @sig_type: Type of the signal inside a media pad
* @flags: Pad flags, as defined in
* :ref:`include/uapi/linux/media.h <media_header>`
* (seek for ``MEDIA_PAD_FL_*``)
@@ -169,6 +198,7 @@ struct media_pad {
struct media_gobj graph_obj; /* must be first field in struct */
struct media_entity *entity;
u16 index;
+ enum media_pad_signal_type sig_type;
unsigned long flags;
};
@@ -641,6 +671,24 @@ static inline void media_entity_cleanup(struct media_entity *entity) {}
#endif
/**
+ * media_get_pad_index() - retrieves a pad index from an entity
+ *
+ * @entity: entity where the pads belong
+ * @is_sink: true if the pad is a sink, false if it is a source
+ * @sig_type: type of signal of the pad to be search
+ *
+ * This helper function finds the first pad index inside an entity that
+ * satisfies both @is_sink and @sig_type conditions.
+ *
+ * Return:
+ *
+ * On success, return the pad number. If the pad was not found or the media
+ * entity is a NULL pointer, return -EINVAL.
+ */
+int media_get_pad_index(struct media_entity *entity, bool is_sink,
+ enum media_pad_signal_type sig_type);
+
+/**
* media_create_pad_link() - creates a link between two entities.
*
* @source: pointer to &media_entity of the source pad.
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index 61571773a98d..c0cfbe16a854 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -317,13 +317,6 @@ struct ir_raw_event {
unsigned carrier_report:1;
};
-#define DEFINE_IR_RAW_EVENT(event) struct ir_raw_event event = {}
-
-static inline void init_ir_raw_event(struct ir_raw_event *ev)
-{
- memset(ev, 0, sizeof(*ev));
-}
-
#define IR_DEFAULT_TIMEOUT MS_TO_NS(125)
#define IR_MAX_DURATION 500000000 /* 500 ms */
#define US_TO_NS(usec) ((usec) * 1000)
@@ -344,9 +337,7 @@ int ir_raw_encode_carrier(enum rc_proto protocol);
static inline void ir_raw_event_reset(struct rc_dev *dev)
{
- struct ir_raw_event ev = { .reset = true };
-
- ir_raw_event_store(dev, &ev);
+ ir_raw_event_store(dev, &((struct ir_raw_event) { .reset = true }));
dev->idle = true;
ir_raw_event_handle(dev);
}
diff --git a/include/media/rcar-fcp.h b/include/media/rcar-fcp.h
index b60a7b176c37..179240fb163b 100644
--- a/include/media/rcar-fcp.h
+++ b/include/media/rcar-fcp.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* rcar-fcp.h -- R-Car Frame Compression Processor Driver
*
* Copyright (C) 2016 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef __MEDIA_RCAR_FCP_H__
#define __MEDIA_RCAR_FCP_H__
diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h
index 1592d323c577..1497bda66c3b 100644
--- a/include/media/v4l2-async.h
+++ b/include/media/v4l2-async.h
@@ -20,9 +20,6 @@ struct v4l2_device;
struct v4l2_subdev;
struct v4l2_async_notifier;
-/* A random max subdevice number, used to allocate an array on stack */
-#define V4L2_MAX_SUBDEVS 128U
-
/**
* enum v4l2_async_match_type - type of asynchronous subdevice logic to be used
* in order to identify a match
@@ -73,6 +70,8 @@ enum v4l2_async_match_type {
* @match.custom.priv:
* Driver-specific private struct with match parameters
* to be used if %V4L2_ASYNC_MATCH_CUSTOM.
+ * @asd_list: used to add struct v4l2_async_subdev objects to the
+ * master notifier @asd_list
* @list: used to link struct v4l2_async_subdev objects, waiting to be
* probed, to a notifier->waiting list
*
@@ -90,14 +89,15 @@ struct v4l2_async_subdev {
unsigned short address;
} i2c;
struct {
- bool (*match)(struct device *,
- struct v4l2_async_subdev *);
+ bool (*match)(struct device *dev,
+ struct v4l2_async_subdev *sd);
void *priv;
} custom;
} match;
/* v4l2-async core private: not to be used by drivers */
struct list_head list;
+ struct list_head asd_list;
};
/**
@@ -121,30 +121,108 @@ struct v4l2_async_notifier_operations {
* struct v4l2_async_notifier - v4l2_device notifier data
*
* @ops: notifier operations
- * @num_subdevs: number of subdevices used in the subdevs array
- * @max_subdevs: number of subdevices allocated in the subdevs array
- * @subdevs: array of pointers to subdevice descriptors
* @v4l2_dev: v4l2_device of the root notifier, NULL otherwise
* @sd: sub-device that registered the notifier, NULL otherwise
* @parent: parent notifier
+ * @asd_list: master list of struct v4l2_async_subdev
* @waiting: list of struct v4l2_async_subdev, waiting for their drivers
* @done: list of struct v4l2_subdev, already probed
* @list: member in a global list of notifiers
*/
struct v4l2_async_notifier {
const struct v4l2_async_notifier_operations *ops;
- unsigned int num_subdevs;
- unsigned int max_subdevs;
- struct v4l2_async_subdev **subdevs;
struct v4l2_device *v4l2_dev;
struct v4l2_subdev *sd;
struct v4l2_async_notifier *parent;
+ struct list_head asd_list;
struct list_head waiting;
struct list_head done;
struct list_head list;
};
/**
+ * v4l2_async_notifier_init - Initialize a notifier.
+ *
+ * @notifier: pointer to &struct v4l2_async_notifier
+ *
+ * This function initializes the notifier @asd_list. It must be called
+ * before the first call to @v4l2_async_notifier_add_subdev.
+ */
+void v4l2_async_notifier_init(struct v4l2_async_notifier *notifier);
+
+/**
+ * v4l2_async_notifier_add_subdev - Add an async subdev to the
+ * notifier's master asd list.
+ *
+ * @notifier: pointer to &struct v4l2_async_notifier
+ * @asd: pointer to &struct v4l2_async_subdev
+ *
+ * Call this function before registering a notifier to link the
+ * provided asd to the notifiers master @asd_list.
+ */
+int v4l2_async_notifier_add_subdev(struct v4l2_async_notifier *notifier,
+ struct v4l2_async_subdev *asd);
+
+/**
+ * v4l2_async_notifier_add_fwnode_subdev - Allocate and add a fwnode async
+ * subdev to the notifier's master asd_list.
+ *
+ * @notifier: pointer to &struct v4l2_async_notifier
+ * @fwnode: fwnode handle of the sub-device to be matched
+ * @asd_struct_size: size of the driver's async sub-device struct, including
+ * sizeof(struct v4l2_async_subdev). The &struct
+ * v4l2_async_subdev shall be the first member of
+ * the driver's async sub-device struct, i.e. both
+ * begin at the same memory address.
+ *
+ * Allocate a fwnode-matched asd of size asd_struct_size, and add it
+ * to the notifiers @asd_list.
+ */
+struct v4l2_async_subdev *
+v4l2_async_notifier_add_fwnode_subdev(struct v4l2_async_notifier *notifier,
+ struct fwnode_handle *fwnode,
+ unsigned int asd_struct_size);
+
+/**
+ * v4l2_async_notifier_add_i2c_subdev - Allocate and add an i2c async
+ * subdev to the notifier's master asd_list.
+ *
+ * @notifier: pointer to &struct v4l2_async_notifier
+ * @adapter_id: I2C adapter ID to be matched
+ * @address: I2C address of sub-device to be matched
+ * @asd_struct_size: size of the driver's async sub-device struct, including
+ * sizeof(struct v4l2_async_subdev). The &struct
+ * v4l2_async_subdev shall be the first member of
+ * the driver's async sub-device struct, i.e. both
+ * begin at the same memory address.
+ *
+ * Same as above but for I2C matched sub-devices.
+ */
+struct v4l2_async_subdev *
+v4l2_async_notifier_add_i2c_subdev(struct v4l2_async_notifier *notifier,
+ int adapter_id, unsigned short address,
+ unsigned int asd_struct_size);
+
+/**
+ * v4l2_async_notifier_add_devname_subdev - Allocate and add a device-name
+ * async subdev to the notifier's master asd_list.
+ *
+ * @notifier: pointer to &struct v4l2_async_notifier
+ * @device_name: device name string to be matched
+ * @asd_struct_size: size of the driver's async sub-device struct, including
+ * sizeof(struct v4l2_async_subdev). The &struct
+ * v4l2_async_subdev shall be the first member of
+ * the driver's async sub-device struct, i.e. both
+ * begin at the same memory address.
+ *
+ * Same as above but for device-name matched sub-devices.
+ */
+struct v4l2_async_subdev *
+v4l2_async_notifier_add_devname_subdev(struct v4l2_async_notifier *notifier,
+ const char *device_name,
+ unsigned int asd_struct_size);
+
+/**
* v4l2_async_notifier_register - registers a subdevice asynchronous notifier
*
* @v4l2_dev: pointer to &struct v4l2_device
@@ -164,7 +242,8 @@ int v4l2_async_subdev_notifier_register(struct v4l2_subdev *sd,
struct v4l2_async_notifier *notifier);
/**
- * v4l2_async_notifier_unregister - unregisters a subdevice asynchronous notifier
+ * v4l2_async_notifier_unregister - unregisters a subdevice
+ * asynchronous notifier
*
* @notifier: pointer to &struct v4l2_async_notifier
*/
@@ -177,7 +256,9 @@ void v4l2_async_notifier_unregister(struct v4l2_async_notifier *notifier);
* Release memory resources related to a notifier, including the async
* sub-devices allocated for the purposes of the notifier but not the notifier
* itself. The user is responsible for calling this function to clean up the
- * notifier after calling @v4l2_async_notifier_parse_fwnode_endpoints or
+ * notifier after calling
+ * @v4l2_async_notifier_add_subdev,
+ * @v4l2_async_notifier_parse_fwnode_endpoints or
* @v4l2_fwnode_reference_parse_sensor_common.
*
* There is no harm from calling v4l2_async_notifier_cleanup in other
@@ -213,8 +294,8 @@ int v4l2_async_register_subdev(struct v4l2_subdev *sd);
* An error is returned if the module is no longer loaded on any attempts
* to register it.
*/
-int __must_check v4l2_async_register_subdev_sensor_common(
- struct v4l2_subdev *sd);
+int __must_check
+v4l2_async_register_subdev_sensor_common(struct v4l2_subdev *sd);
/**
* v4l2_async_unregister_subdev - unregisters a sub-device to the asynchronous
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index cdc87ec61e54..82715645617b 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -155,6 +155,18 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
const unsigned short *probe_addrs);
/**
+ * v4l2_i2c_subdev_set_name - Set name for an I²C sub-device
+ *
+ * @sd: pointer to &struct v4l2_subdev
+ * @client: pointer to struct i2c_client
+ * @devname: the name of the device; if NULL, the I²C device's name will be used
+ * @postfix: sub-device specific string to put right after the I²C device name;
+ * may be NULL
+ */
+void v4l2_i2c_subdev_set_name(struct v4l2_subdev *sd, struct i2c_client *client,
+ const char *devname, const char *postfix);
+
+/**
* v4l2_i2c_subdev_init - Initializes a &struct v4l2_subdev with data from
* an i2c_client struct.
*
@@ -283,7 +295,7 @@ struct v4l2_priv_tun_config {
* @height: pointer to height that will be adjusted if needed.
* @hmin: minimum height.
* @hmax: maximum height.
- * @halign: least significant bit on width.
+ * @halign: least significant bit on height.
* @salign: least significant bit for the image size (e. g.
* :math:`width * height`).
*
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index f615ba1b29dd..ff89df428f79 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -729,6 +729,22 @@ struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id);
void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
/**
+ * __v4l2_ctrl_grab() - Unlocked variant of v4l2_ctrl_grab.
+ *
+ * @ctrl: The control to (de)activate.
+ * @grabbed: True if the control should become grabbed.
+ *
+ * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically.
+ * Does nothing if @ctrl == NULL.
+ * The V4L2_EVENT_CTRL event will be generated afterwards.
+ * This will usually be called when starting or stopping streaming in the
+ * driver.
+ *
+ * This function assumes that the control handler is locked by the caller.
+ */
+void __v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
+
+/**
* v4l2_ctrl_grab() - Mark the control as grabbed or not grabbed.
*
* @ctrl: The control to (de)activate.
@@ -743,7 +759,15 @@ void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
* This function assumes that the control handler is not locked and will
* take the lock itself.
*/
-void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
+static inline void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed)
+{
+ if (!ctrl)
+ return;
+
+ v4l2_ctrl_lock(ctrl);
+ __v4l2_ctrl_grab(ctrl, grabbed);
+ v4l2_ctrl_unlock(ctrl);
+}
/**
*__v4l2_ctrl_modify_range() - Unlocked variant of v4l2_ctrl_modify_range()
diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h
index 17cb27df1b81..2cc0cabc124f 100644
--- a/include/media/v4l2-dv-timings.h
+++ b/include/media/v4l2-dv-timings.h
@@ -10,6 +10,17 @@
#include <linux/videodev2.h>
+/**
+ * v4l2_calc_timeperframe - helper function to calculate timeperframe based
+ * v4l2_dv_timings fields.
+ * @t: Timings for the video mode.
+ *
+ * Calculates the expected timeperframe using the pixel clock value and
+ * horizontal/vertical measures. This means that v4l2_dv_timings structure
+ * must be correctly and fully filled.
+ */
+struct v4l2_fract v4l2_calc_timeperframe(const struct v4l2_dv_timings *t);
+
/*
* v4l2_dv_timings_presets: list of all dv_timings presets.
*/
@@ -234,4 +245,10 @@ v4l2_hdmi_rx_colorimetry(const struct hdmi_avi_infoframe *avi,
const struct hdmi_vendor_infoframe *hdmi,
unsigned int height);
+u16 v4l2_get_edid_phys_addr(const u8 *edid, unsigned int size,
+ unsigned int *offset);
+void v4l2_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr);
+u16 v4l2_phys_addr_for_input(u16 phys_addr, u8 input);
+int v4l2_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port);
+
#endif
diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h
index 9cccab618b98..6d9d9f1839ac 100644
--- a/include/media/v4l2-fwnode.h
+++ b/include/media/v4l2-fwnode.h
@@ -23,6 +23,7 @@
#include <linux/types.h>
#include <media/v4l2-mediabus.h>
+#include <media/v4l2-subdev.h>
struct fwnode_handle;
struct v4l2_async_notifier;
@@ -70,8 +71,8 @@ struct v4l2_fwnode_bus_parallel {
* @clock_lane: the number of the clock lane
*/
struct v4l2_fwnode_bus_mipi_csi1 {
- bool clock_inv;
- bool strobe;
+ unsigned char clock_inv:1;
+ unsigned char strobe:1;
bool lane_polarity[2];
unsigned char data_lane;
unsigned char clock_lane;
@@ -130,19 +131,30 @@ struct v4l2_fwnode_link {
* @fwnode: pointer to the endpoint's fwnode handle
* @vep: pointer to the V4L2 fwnode data structure
*
- * All properties are optional. If none are found, we don't set any flags. This
- * means the port has a static configuration and no properties have to be
- * specified explicitly. If any properties that identify the bus as parallel
- * are found and slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if
- * we recognise the bus as serial CSI-2 and clock-noncontinuous isn't set, we
- * set the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag. The caller should hold a
- * reference to @fwnode.
+ * This function parses the V4L2 fwnode endpoint specific parameters from the
+ * firmware. The caller is responsible for assigning @vep.bus_type to a valid
+ * media bus type. The caller may also set the default configuration for the
+ * endpoint --- a configuration that shall be in line with the DT binding
+ * documentation. Should a device support multiple bus types, the caller may
+ * call this function once the correct type is found --- with a default
+ * configuration valid for that type.
+ *
+ * As a compatibility means guessing the bus type is also supported by setting
+ * @vep.bus_type to V4L2_MBUS_UNKNOWN. The caller may not provide a default
+ * configuration in this case as the defaults are specific to a given bus type.
+ * This functionality is deprecated and should not be used in new drivers and it
+ * is only supported for CSI-2 D-PHY, parallel and Bt.656 busses.
+ *
+ * The function does not change the V4L2 fwnode endpoint state if it fails.
*
* NOTE: This function does not parse properties the size of which is variable
* without a low fixed limit. Please use v4l2_fwnode_endpoint_alloc_parse() in
* new drivers instead.
*
- * Return: 0 on success or a negative error code on failure.
+ * Return: %0 on success or a negative error code on failure:
+ * %-ENOMEM on memory allocation failure
+ * %-EINVAL on parsing failure
+ * %-ENXIO on mismatching bus types
*/
int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode,
struct v4l2_fwnode_endpoint *vep);
@@ -160,14 +172,23 @@ void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep);
/**
* v4l2_fwnode_endpoint_alloc_parse() - parse all fwnode node properties
* @fwnode: pointer to the endpoint's fwnode handle
+ * @vep: pointer to the V4L2 fwnode data structure
*
- * All properties are optional. If none are found, we don't set any flags. This
- * means the port has a static configuration and no properties have to be
- * specified explicitly. If any properties that identify the bus as parallel
- * are found and slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if
- * we recognise the bus as serial CSI-2 and clock-noncontinuous isn't set, we
- * set the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag. The caller should hold a
- * reference to @fwnode.
+ * This function parses the V4L2 fwnode endpoint specific parameters from the
+ * firmware. The caller is responsible for assigning @vep.bus_type to a valid
+ * media bus type. The caller may also set the default configuration for the
+ * endpoint --- a configuration that shall be in line with the DT binding
+ * documentation. Should a device support multiple bus types, the caller may
+ * call this function once the correct type is found --- with a default
+ * configuration valid for that type.
+ *
+ * As a compatibility means guessing the bus type is also supported by setting
+ * @vep.bus_type to V4L2_MBUS_UNKNOWN. The caller may not provide a default
+ * configuration in this case as the defaults are specific to a given bus type.
+ * This functionality is deprecated and should not be used in new drivers and it
+ * is only supported for CSI-2 D-PHY, parallel and Bt.656 busses.
+ *
+ * The function does not change the V4L2 fwnode endpoint state if it fails.
*
* v4l2_fwnode_endpoint_alloc_parse() has two important differences to
* v4l2_fwnode_endpoint_parse():
@@ -177,11 +198,13 @@ void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep);
* 2. The memory it has allocated to store the variable size data must be freed
* using v4l2_fwnode_endpoint_free() when no longer needed.
*
- * Return: Pointer to v4l2_fwnode_endpoint if successful, on an error pointer
- * on error.
+ * Return: %0 on success or a negative error code on failure:
+ * %-ENOMEM on memory allocation failure
+ * %-EINVAL on parsing failure
+ * %-ENXIO on mismatching bus types
*/
-struct v4l2_fwnode_endpoint *v4l2_fwnode_endpoint_alloc_parse(
- struct fwnode_handle *fwnode);
+int v4l2_fwnode_endpoint_alloc_parse(struct fwnode_handle *fwnode,
+ struct v4l2_fwnode_endpoint *vep);
/**
* v4l2_fwnode_parse_link() - parse a link between two endpoints
@@ -213,7 +236,6 @@ int v4l2_fwnode_parse_link(struct fwnode_handle *fwnode,
*/
void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link);
-
/**
* typedef parse_endpoint_func - Driver's callback function to be called on
* each V4L2 fwnode endpoint.
@@ -232,7 +254,6 @@ typedef int (*parse_endpoint_func)(struct device *dev,
struct v4l2_fwnode_endpoint *vep,
struct v4l2_async_subdev *asd);
-
/**
* v4l2_async_notifier_parse_fwnode_endpoints - Parse V4L2 fwnode endpoints in a
* device node
@@ -247,7 +268,7 @@ typedef int (*parse_endpoint_func)(struct device *dev,
* endpoint. Optional.
*
* Parse the fwnode endpoints of the @dev device and populate the async sub-
- * devices array of the notifier. The @parse_endpoint callback function is
+ * devices list in the notifier. The @parse_endpoint callback function is
* called for each endpoint with the corresponding async sub-device pointer to
* let the caller initialize the driver-specific part of the async sub-device
* structure.
@@ -258,11 +279,6 @@ typedef int (*parse_endpoint_func)(struct device *dev,
* This function may not be called on a registered notifier and may be called on
* a notifier only once.
*
- * Do not change the notifier's subdevs array, take references to the subdevs
- * array itself or change the notifier's num_subdevs field. This is because this
- * function allocates and reallocates the subdevs array based on parsing
- * endpoints.
- *
* The &struct v4l2_fwnode_endpoint passed to the callback function
* @parse_endpoint is released once the function is finished. If there is a need
* to retain that configuration, the user needs to allocate memory for it.
@@ -276,10 +292,11 @@ typedef int (*parse_endpoint_func)(struct device *dev,
* %-EINVAL if graph or endpoint parsing failed
* Other error codes as returned by @parse_endpoint
*/
-int v4l2_async_notifier_parse_fwnode_endpoints(
- struct device *dev, struct v4l2_async_notifier *notifier,
- size_t asd_struct_size,
- parse_endpoint_func parse_endpoint);
+int
+v4l2_async_notifier_parse_fwnode_endpoints(struct device *dev,
+ struct v4l2_async_notifier *notifier,
+ size_t asd_struct_size,
+ parse_endpoint_func parse_endpoint);
/**
* v4l2_async_notifier_parse_fwnode_endpoints_by_port - Parse V4L2 fwnode
@@ -303,7 +320,7 @@ int v4l2_async_notifier_parse_fwnode_endpoints(
* devices). In this case the driver must know which ports to parse.
*
* Parse the fwnode endpoints of the @dev device on a given @port and populate
- * the async sub-devices array of the notifier. The @parse_endpoint callback
+ * the async sub-devices list of the notifier. The @parse_endpoint callback
* function is called for each endpoint with the corresponding async sub-device
* pointer to let the caller initialize the driver-specific part of the async
* sub-device structure.
@@ -314,11 +331,6 @@ int v4l2_async_notifier_parse_fwnode_endpoints(
* This function may not be called on a registered notifier and may be called on
* a notifier only once per port.
*
- * Do not change the notifier's subdevs array, take references to the subdevs
- * array itself or change the notifier's num_subdevs field. This is because this
- * function allocates and reallocates the subdevs array based on parsing
- * endpoints.
- *
* The &struct v4l2_fwnode_endpoint passed to the callback function
* @parse_endpoint is released once the function is finished. If there is a need
* to retain that configuration, the user needs to allocate memory for it.
@@ -332,10 +344,12 @@ int v4l2_async_notifier_parse_fwnode_endpoints(
* %-EINVAL if graph or endpoint parsing failed
* Other error codes as returned by @parse_endpoint
*/
-int v4l2_async_notifier_parse_fwnode_endpoints_by_port(
- struct device *dev, struct v4l2_async_notifier *notifier,
- size_t asd_struct_size, unsigned int port,
- parse_endpoint_func parse_endpoint);
+int
+v4l2_async_notifier_parse_fwnode_endpoints_by_port(struct device *dev,
+ struct v4l2_async_notifier *notifier,
+ size_t asd_struct_size,
+ unsigned int port,
+ parse_endpoint_func parse_endpoint);
/**
* v4l2_fwnode_reference_parse_sensor_common - parse common references on
@@ -355,7 +369,44 @@ int v4l2_async_notifier_parse_fwnode_endpoints_by_port(
* -ENOMEM if memory allocation failed
* -EINVAL if property parsing failed
*/
-int v4l2_async_notifier_parse_fwnode_sensor_common(
- struct device *dev, struct v4l2_async_notifier *notifier);
+int v4l2_async_notifier_parse_fwnode_sensor_common(struct device *dev,
+ struct v4l2_async_notifier *notifier);
+
+/**
+ * v4l2_async_register_fwnode_subdev - registers a sub-device to the
+ * asynchronous sub-device framework
+ * and parses fwnode endpoints
+ *
+ * @sd: pointer to struct &v4l2_subdev
+ * @asd_struct_size: size of the driver's async sub-device struct, including
+ * sizeof(struct v4l2_async_subdev). The &struct
+ * v4l2_async_subdev shall be the first member of
+ * the driver's async sub-device struct, i.e. both
+ * begin at the same memory address.
+ * @ports: array of port id's to parse for fwnode endpoints. If NULL, will
+ * parse all ports owned by the sub-device.
+ * @num_ports: number of ports in @ports array. Ignored if @ports is NULL.
+ * @parse_endpoint: Driver's callback function called on each V4L2 fwnode
+ * endpoint. Optional.
+ *
+ * This function is just like v4l2_async_register_subdev() with the
+ * exception that calling it will also allocate a notifier for the
+ * sub-device, parse the sub-device's firmware node endpoints using
+ * v4l2_async_notifier_parse_fwnode_endpoints() or
+ * v4l2_async_notifier_parse_fwnode_endpoints_by_port(), and
+ * registers the sub-device notifier. The sub-device is similarly
+ * unregistered by calling v4l2_async_unregister_subdev().
+ *
+ * While registered, the subdev module is marked as in-use.
+ *
+ * An error is returned if the module is no longer loaded on any attempts
+ * to register it.
+ */
+int
+v4l2_async_register_fwnode_subdev(struct v4l2_subdev *sd,
+ size_t asd_struct_size,
+ unsigned int *ports,
+ unsigned int num_ports,
+ parse_endpoint_func parse_endpoint);
#endif /* _V4L2_FWNODE_H */
diff --git a/include/media/v4l2-mc.h b/include/media/v4l2-mc.h
index 2634d9dc9916..bf5043c1ab6b 100644
--- a/include/media/v4l2-mc.h
+++ b/include/media/v4l2-mc.h
@@ -23,84 +23,6 @@
#include <media/v4l2-dev.h>
#include <linux/types.h>
-/**
- * enum tuner_pad_index - tuner pad index for MEDIA_ENT_F_TUNER
- *
- * @TUNER_PAD_RF_INPUT: Radiofrequency (RF) sink pad, usually linked to a
- * RF connector entity.
- * @TUNER_PAD_OUTPUT: Tuner video output source pad. Contains the video
- * chrominance and luminance or the hole bandwidth
- * of the signal converted to an Intermediate Frequency
- * (IF) or to baseband (on zero-IF tuners).
- * @TUNER_PAD_AUD_OUT: Tuner audio output source pad. Tuners used to decode
- * analog TV signals have an extra pad for audio output.
- * Old tuners use an analog stage with a saw filter for
- * the audio IF frequency. The output of the pad is, in
- * this case, the audio IF, with should be decoded either
- * by the bridge chipset (that's the case of cx2388x
- * chipsets) or may require an external IF sound
- * processor, like msp34xx. On modern silicon tuners,
- * the audio IF decoder is usually incorporated at the
- * tuner. On such case, the output of this pad is an
- * audio sampled data.
- * @TUNER_NUM_PADS: Number of pads of the tuner.
- */
-enum tuner_pad_index {
- TUNER_PAD_RF_INPUT,
- TUNER_PAD_OUTPUT,
- TUNER_PAD_AUD_OUT,
- TUNER_NUM_PADS
-};
-
-/**
- * enum if_vid_dec_pad_index - video IF-PLL pad index for
- * MEDIA_ENT_F_IF_VID_DECODER
- *
- * @IF_VID_DEC_PAD_IF_INPUT: video Intermediate Frequency (IF) sink pad
- * @IF_VID_DEC_PAD_OUT: IF-PLL video output source pad. Contains the
- * video chrominance and luminance IF signals.
- * @IF_VID_DEC_PAD_NUM_PADS: Number of pads of the video IF-PLL.
- */
-enum if_vid_dec_pad_index {
- IF_VID_DEC_PAD_IF_INPUT,
- IF_VID_DEC_PAD_OUT,
- IF_VID_DEC_PAD_NUM_PADS
-};
-
-/**
- * enum if_aud_dec_pad_index - audio/sound IF-PLL pad index for
- * MEDIA_ENT_F_IF_AUD_DECODER
- *
- * @IF_AUD_DEC_PAD_IF_INPUT: audio Intermediate Frequency (IF) sink pad
- * @IF_AUD_DEC_PAD_OUT: IF-PLL audio output source pad. Contains the
- * audio sampled stream data, usually connected
- * to the bridge bus via an Inter-IC Sound (I2S)
- * bus.
- * @IF_AUD_DEC_PAD_NUM_PADS: Number of pads of the audio IF-PLL.
- */
-enum if_aud_dec_pad_index {
- IF_AUD_DEC_PAD_IF_INPUT,
- IF_AUD_DEC_PAD_OUT,
- IF_AUD_DEC_PAD_NUM_PADS
-};
-
-/**
- * enum demod_pad_index - analog TV pad index for MEDIA_ENT_F_ATV_DECODER
- *
- * @DEMOD_PAD_IF_INPUT: IF input sink pad.
- * @DEMOD_PAD_VID_OUT: Video output source pad.
- * @DEMOD_PAD_VBI_OUT: Vertical Blank Interface (VBI) output source pad.
- * @DEMOD_PAD_AUDIO_OUT: Audio output source pad.
- * @DEMOD_NUM_PADS: Maximum number of output pads.
- */
-enum demod_pad_index {
- DEMOD_PAD_IF_INPUT,
- DEMOD_PAD_VID_OUT,
- DEMOD_PAD_VBI_OUT,
- DEMOD_PAD_AUDIO_OUT,
- DEMOD_NUM_PADS
-};
-
/* We don't need to include pci.h or usb.h here */
struct pci_dev;
struct usb_device;
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 4bbb5f3d2b02..66cb746ceeb5 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -14,7 +14,6 @@
#include <linux/v4l2-mediabus.h>
#include <linux/bitops.h>
-
/* Parallel flags */
/*
* Can the client run in master or in slave mode. By "Master mode" an operation
@@ -63,26 +62,34 @@
#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK BIT(8)
#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(9)
-#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \
- V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
-#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
- V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)
+#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | \
+ V4L2_MBUS_CSI2_2_LANE | \
+ V4L2_MBUS_CSI2_3_LANE | \
+ V4L2_MBUS_CSI2_4_LANE)
+#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | \
+ V4L2_MBUS_CSI2_CHANNEL_1 | \
+ V4L2_MBUS_CSI2_CHANNEL_2 | \
+ V4L2_MBUS_CSI2_CHANNEL_3)
/**
* enum v4l2_mbus_type - media bus type
+ * @V4L2_MBUS_UNKNOWN: unknown bus type, no V4L2 mediabus configuration
* @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync
* @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can
* also be used for BT.1120
* @V4L2_MBUS_CSI1: MIPI CSI-1 serial interface
* @V4L2_MBUS_CCP2: CCP2 (Compact Camera Port 2)
- * @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface
+ * @V4L2_MBUS_CSI2_DPHY: MIPI CSI-2 serial interface, with D-PHY
+ * @V4L2_MBUS_CSI2_CPHY: MIPI CSI-2 serial interface, with C-PHY
*/
enum v4l2_mbus_type {
+ V4L2_MBUS_UNKNOWN,
V4L2_MBUS_PARALLEL,
V4L2_MBUS_BT656,
V4L2_MBUS_CSI1,
V4L2_MBUS_CCP2,
- V4L2_MBUS_CSI2,
+ V4L2_MBUS_CSI2_DPHY,
+ V4L2_MBUS_CSI2_CPHY,
};
/**
@@ -102,8 +109,9 @@ struct v4l2_mbus_config {
* @pix_fmt: pointer to &struct v4l2_pix_format to be filled
* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model
*/
-static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
- const struct v4l2_mbus_framefmt *mbus_fmt)
+static inline void
+v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
+ const struct v4l2_mbus_framefmt *mbus_fmt)
{
pix_fmt->width = mbus_fmt->width;
pix_fmt->height = mbus_fmt->height;
@@ -124,7 +132,7 @@ static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
* @code: data format code (from &enum v4l2_mbus_pixelcode)
*/
static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
- const struct v4l2_pix_format *pix_fmt,
+ const struct v4l2_pix_format *pix_fmt,
u32 code)
{
mbus_fmt->width = pix_fmt->width;
@@ -144,9 +152,9 @@ static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
* @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be filled
* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model
*/
-static inline void v4l2_fill_pix_format_mplane(
- struct v4l2_pix_format_mplane *pix_mp_fmt,
- const struct v4l2_mbus_framefmt *mbus_fmt)
+static inline void
+v4l2_fill_pix_format_mplane(struct v4l2_pix_format_mplane *pix_mp_fmt,
+ const struct v4l2_mbus_framefmt *mbus_fmt)
{
pix_mp_fmt->width = mbus_fmt->width;
pix_mp_fmt->height = mbus_fmt->height;
@@ -164,9 +172,9 @@ static inline void v4l2_fill_pix_format_mplane(
* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled
* @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be used as model
*/
-static inline void v4l2_fill_mbus_format_mplane(
- struct v4l2_mbus_framefmt *mbus_fmt,
- const struct v4l2_pix_format_mplane *pix_mp_fmt)
+static inline void
+v4l2_fill_mbus_format_mplane(struct v4l2_mbus_framefmt *mbus_fmt,
+ const struct v4l2_pix_format_mplane *pix_mp_fmt)
{
mbus_fmt->width = pix_mp_fmt->width;
mbus_fmt->height = pix_mp_fmt->height;
diff --git a/include/media/v4l2-rect.h b/include/media/v4l2-rect.h
index 595c3ba05f23..c86474dc7b55 100644
--- a/include/media/v4l2-rect.h
+++ b/include/media/v4l2-rect.h
@@ -83,6 +83,32 @@ static inline bool v4l2_rect_same_size(const struct v4l2_rect *r1,
}
/**
+ * v4l2_rect_same_position() - return true if r1 has the same position as r2
+ * @r1: rectangle.
+ * @r2: rectangle.
+ *
+ * Return true if both rectangles have the same position
+ */
+static inline bool v4l2_rect_same_position(const struct v4l2_rect *r1,
+ const struct v4l2_rect *r2)
+{
+ return r1->top == r2->top && r1->left == r2->left;
+}
+
+/**
+ * v4l2_rect_equal() - return true if r1 equals r2
+ * @r1: rectangle.
+ * @r2: rectangle.
+ *
+ * Return true if both rectangles have the same size and position.
+ */
+static inline bool v4l2_rect_equal(const struct v4l2_rect *r1,
+ const struct v4l2_rect *r2)
+{
+ return v4l2_rect_same_size(r1, r2) && v4l2_rect_same_position(r1, r2);
+}
+
+/**
* v4l2_rect_intersect() - calculate the intersection of two rects.
* @r: intersection of @r1 and @r2.
* @r1: rectangle.
diff --git a/include/media/vsp1.h b/include/media/vsp1.h
index 3093b9cb9067..1cf868360701 100644
--- a/include/media/vsp1.h
+++ b/include/media/vsp1.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* vsp1.h -- R-Car VSP1 API
*
* Copyright (C) 2015 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef __MEDIA_VSP1_H__
#define __MEDIA_VSP1_H__
@@ -46,7 +42,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
/**
* struct vsp1_du_atomic_config - VSP atomic configuration parameters
* @pixelformat: plane pixel format (V4L2 4CC)
- * @pitch: line pitch in bytes, for all planes
+ * @pitch: line pitch in bytes for the first plane
* @mem: DMA memory address for each plane of the frame buffer
* @src: source rectangle in the frame buffer (integer coordinates)
* @dst: destination rectangle on the display (integer coordinates)
diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h
index 097fcd812471..3094af68b6e7 100644
--- a/include/uapi/linux/cec.h
+++ b/include/uapi/linux/cec.h
@@ -152,10 +152,13 @@ static inline void cec_msg_set_reply_to(struct cec_msg *msg,
#define CEC_TX_STATUS_LOW_DRIVE (1 << 3)
#define CEC_TX_STATUS_ERROR (1 << 4)
#define CEC_TX_STATUS_MAX_RETRIES (1 << 5)
+#define CEC_TX_STATUS_ABORTED (1 << 6)
+#define CEC_TX_STATUS_TIMEOUT (1 << 7)
#define CEC_RX_STATUS_OK (1 << 0)
#define CEC_RX_STATUS_TIMEOUT (1 << 1)
#define CEC_RX_STATUS_FEATURE_ABORT (1 << 2)
+#define CEC_RX_STATUS_ABORTED (1 << 3)
static inline int cec_msg_status_is_ok(const struct cec_msg *msg)
{
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 5d1a3685bea9..29729d580452 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -225,8 +225,8 @@ enum v4l2_colorspace {
/* For RGB colorspaces such as produces by most webcams. */
V4L2_COLORSPACE_SRGB = 8,
- /* AdobeRGB colorspace */
- V4L2_COLORSPACE_ADOBERGB = 9,
+ /* opRGB colorspace */
+ V4L2_COLORSPACE_OPRGB = 9,
/* BT.2020 colorspace, used for UHDTV. */
V4L2_COLORSPACE_BT2020 = 10,
@@ -258,7 +258,7 @@ enum v4l2_xfer_func {
*
* V4L2_COLORSPACE_SRGB, V4L2_COLORSPACE_JPEG: V4L2_XFER_FUNC_SRGB
*
- * V4L2_COLORSPACE_ADOBERGB: V4L2_XFER_FUNC_ADOBERGB
+ * V4L2_COLORSPACE_OPRGB: V4L2_XFER_FUNC_OPRGB
*
* V4L2_COLORSPACE_SMPTE240M: V4L2_XFER_FUNC_SMPTE240M
*
@@ -269,7 +269,7 @@ enum v4l2_xfer_func {
V4L2_XFER_FUNC_DEFAULT = 0,
V4L2_XFER_FUNC_709 = 1,
V4L2_XFER_FUNC_SRGB = 2,
- V4L2_XFER_FUNC_ADOBERGB = 3,
+ V4L2_XFER_FUNC_OPRGB = 3,
V4L2_XFER_FUNC_SMPTE240M = 4,
V4L2_XFER_FUNC_NONE = 5,
V4L2_XFER_FUNC_DCI_P3 = 6,
@@ -281,7 +281,7 @@ enum v4l2_xfer_func {
* This depends on the colorspace.
*/
#define V4L2_MAP_XFER_FUNC_DEFAULT(colsp) \
- ((colsp) == V4L2_COLORSPACE_ADOBERGB ? V4L2_XFER_FUNC_ADOBERGB : \
+ ((colsp) == V4L2_COLORSPACE_OPRGB ? V4L2_XFER_FUNC_OPRGB : \
((colsp) == V4L2_COLORSPACE_SMPTE240M ? V4L2_XFER_FUNC_SMPTE240M : \
((colsp) == V4L2_COLORSPACE_DCI_P3 ? V4L2_XFER_FUNC_DCI_P3 : \
((colsp) == V4L2_COLORSPACE_RAW ? V4L2_XFER_FUNC_NONE : \
@@ -295,7 +295,7 @@ enum v4l2_ycbcr_encoding {
*
* V4L2_COLORSPACE_SMPTE170M, V4L2_COLORSPACE_470_SYSTEM_M,
* V4L2_COLORSPACE_470_SYSTEM_BG, V4L2_COLORSPACE_SRGB,
- * V4L2_COLORSPACE_ADOBERGB and V4L2_COLORSPACE_JPEG: V4L2_YCBCR_ENC_601
+ * V4L2_COLORSPACE_OPRGB and V4L2_COLORSPACE_JPEG: V4L2_YCBCR_ENC_601
*
* V4L2_COLORSPACE_REC709 and V4L2_COLORSPACE_DCI_P3: V4L2_YCBCR_ENC_709
*
@@ -382,6 +382,17 @@ enum v4l2_quantization {
(((is_rgb_or_hsv) || (colsp) == V4L2_COLORSPACE_JPEG) ? \
V4L2_QUANTIZATION_FULL_RANGE : V4L2_QUANTIZATION_LIM_RANGE))
+/*
+ * Deprecated names for opRGB colorspace (IEC 61966-2-5)
+ *
+ * WARNING: Please don't use these deprecated defines in your code, as
+ * there is a chance we have to remove them in the future.
+ */
+#ifndef __KERNEL__
+#define V4L2_COLORSPACE_ADOBERGB V4L2_COLORSPACE_OPRGB
+#define V4L2_XFER_FUNC_ADOBERGB V4L2_XFER_FUNC_OPRGB
+#endif
+
enum v4l2_priority {
V4L2_PRIORITY_UNSET = 0, /* not initialized */
V4L2_PRIORITY_BACKGROUND = 1,
@@ -703,6 +714,7 @@ struct v4l2_pix_format {
#define V4L2_META_FMT_VSP1_HGO v4l2_fourcc('V', 'S', 'P', 'H') /* R-Car VSP1 1-D Histogram */
#define V4L2_META_FMT_VSP1_HGT v4l2_fourcc('V', 'S', 'P', 'T') /* R-Car VSP1 2-D Histogram */
#define V4L2_META_FMT_UVC v4l2_fourcc('U', 'V', 'C', 'H') /* UVC Payload Header metadata */
+#define V4L2_META_FMT_D4XX v4l2_fourcc('D', '4', 'X', 'X') /* D4XX Payload Header metadata */
/* priv field value to indicates that subsequent fields are valid. */
#define V4L2_PIX_FMT_PRIV_MAGIC 0xfeedcafe
@@ -1400,6 +1412,13 @@ struct v4l2_bt_timings {
* InfoFrame).
*/
#define V4L2_DV_FL_HAS_HDMI_VIC (1 << 8)
+/*
+ * CEA-861 specific: only valid for video receivers.
+ * If set, then HW can detect the difference between regular FPS and
+ * 1000/1001 FPS. Note: This flag is only valid for HDMI VIC codes with
+ * the V4L2_DV_FL_CAN_REDUCE_FPS flag set.
+ */
+#define V4L2_DV_FL_CAN_DETECT_REDUCED_FPS (1 << 9)
/* A few useful defines to calculate the total blanking and frame sizes */
#define V4L2_DV_BT_BLANKING_WIDTH(bt) \
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 13:52:00 +0000