diff options
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r-- | include/net/mac80211.h | 90 |
1 files changed, 76 insertions, 14 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1c005a30313f..f198af600b5e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -125,6 +125,22 @@ * via the usual ieee80211_tx_dequeue). */ +/** + * DOC: HW timestamping + * + * Timing Measurement and Fine Timing Measurement require accurate timestamps + * of the action frames TX/RX and their respective acks. + * + * To report hardware timestamps for Timing Measurement or Fine Timing + * Measurement frame RX, the low level driver should set the SKB's hwtstamp + * field to the frame RX timestamp and report the ack TX timestamp in the + * ieee80211_rx_status struct. + * + * Similarly, To report hardware timestamps for Timing Measurement or Fine + * Timing Measurement frame TX, the driver should set the SKB's hwtstamp field + * to the frame TX timestamp and report the ack RX timestamp in the + * ieee80211_tx_status struct. + */ struct device; /** @@ -261,13 +277,13 @@ enum ieee80211_chanctx_switch_mode { * done. * * @vif: the vif that should be switched from old_ctx to new_ctx - * @link_id: the link ID that's switching + * @link_conf: the link conf that's switching * @old_ctx: the old context to which the vif was assigned * @new_ctx: the new context to which the vif must be assigned */ struct ieee80211_vif_chanctx_switch { struct ieee80211_vif *vif; - unsigned int link_id; + struct ieee80211_bss_conf *link_conf; struct ieee80211_chanctx_conf *old_ctx; struct ieee80211_chanctx_conf *new_ctx; }; @@ -516,6 +532,7 @@ struct ieee80211_fils_discovery { * to that BSS) that can change during the lifetime of the BSS. * * @addr: (link) address used locally + * @link_id: link ID, or 0 for non-MLO * @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE * @uora_exists: is the UORA element advertised by AP * @ack_enabled: indicates support to receive a multi-TID that solicits either @@ -577,8 +594,6 @@ struct ieee80211_fils_discovery { * @cqm_rssi_high: Connection quality monitor RSSI upper threshold. * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis * @qos: This is a QoS-enabled BSS. - * @ps: power-save mode (STA only). This flag is NOT affected by - * offchannel/dynamic_ps operations. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. * @txpower: TX power in dBm. INT_MIN means not configured. * @txpower_type: TX power adjustment used to control per packet Transmit @@ -639,6 +654,7 @@ struct ieee80211_fils_discovery { */ struct ieee80211_bss_conf { const u8 *bssid; + unsigned int link_id; u8 addr[ETH_ALEN] __aligned(2); u8 htc_trig_based_pkt_ext; bool uora_exists; @@ -671,7 +687,6 @@ struct ieee80211_bss_conf { struct cfg80211_chan_def chandef; struct ieee80211_mu_group_data mu_group; bool qos; - bool ps; bool hidden_ssid; int txpower; enum nl80211_tx_power_setting txpower_type; @@ -867,10 +882,14 @@ enum mac80211_tx_info_flags { * @IEEE80211_TX_CTRL_DONT_REORDER: This frame should not be reordered * relative to other frames that have this flag set, independent * of their QoS TID or other priority field values. + * @IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX: first MLO TX, used mostly internally + * for sequence number assignment * @IEEE80211_TX_CTRL_MLO_LINK: If not @IEEE80211_LINK_UNSPECIFIED, this * frame should be transmitted on the specific link. This really is * only relevant for frames that do not have data present, and is - * also not used for 802.3 format frames. + * also not used for 802.3 format frames. Note that even if the frame + * is on a specific link, address translation might still apply if + * it's intended for an MLD. * * These flags are used in tx_info->control.flags. */ @@ -884,10 +903,14 @@ enum mac80211_tx_control_flags { IEEE80211_TX_INTCFL_NEED_TXPROCESSING = BIT(6), IEEE80211_TX_CTRL_NO_SEQNO = BIT(7), IEEE80211_TX_CTRL_DONT_REORDER = BIT(8), + IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX = BIT(9), IEEE80211_TX_CTRL_MLO_LINK = 0xf0000000, }; #define IEEE80211_LINK_UNSPECIFIED 0xf +#define IEEE80211_TX_CTRL_MLO_LINK_UNSPEC \ + u32_encode_bits(IEEE80211_LINK_UNSPECIFIED, \ + IEEE80211_TX_CTRL_MLO_LINK) /** * enum mac80211_tx_status_flags - flags to describe transmit status @@ -1177,12 +1200,16 @@ struct ieee80211_rate_status { * @rates: Mrr stages that were used when sending the packet * @n_rates: Number of mrr stages (count of instances for @rates) * @free_list: list where processed skbs are stored to be free'd by the driver + * @ack_hwtstamp: Hardware timestamp of the received ack in nanoseconds + * Only needed for Timing measurement and Fine timing measurement action + * frames. Only reported by devices that have timestamping enabled. */ struct ieee80211_tx_status { struct ieee80211_sta *sta; struct ieee80211_tx_info *info; struct sk_buff *skb; struct ieee80211_rate_status *rates; + ktime_t ack_hwtstamp; u8 n_rates; struct list_head *free_list; @@ -1420,6 +1447,9 @@ enum mac80211_rx_encoding { * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. * @boottime_ns: CLOCK_BOOTTIME timestamp the frame was received at, this is * needed only for beacons and probe responses that update the scan cache. + * @ack_tx_hwtstamp: Hardware timestamp for the ack TX in nanoseconds. Only + * needed for Timing measurement and Fine timing measurement action frames. + * Only reported by devices that have timestamping enabled. * @device_timestamp: arbitrary timestamp for the device, mac80211 doesn't use * it but can store it and pass it back to the driver for synchronisation * @band: the active band when this frame was received @@ -1453,7 +1483,10 @@ enum mac80211_rx_encoding { */ struct ieee80211_rx_status { u64 mactime; - u64 boottime_ns; + union { + u64 boottime_ns; + ktime_t ack_tx_hwtstamp; + }; u32 device_timestamp; u32 ampdu_reference; u32 flag; @@ -1713,6 +1746,8 @@ enum ieee80211_offload_flags { * @assoc: association status * @ibss_joined: indicates whether this station is part of an IBSS or not * @ibss_creator: indicates if a new IBSS network is being created + * @ps: power-save mode (STA only). This flag is NOT affected by + * offchannel/dynamic_ps operations. * @aid: association ID number, valid only when @assoc is true * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The * may filter ARP queries targeted for other addresses than listed here. @@ -1727,11 +1762,14 @@ enum ieee80211_offload_flags { * @idle: This interface is idle. There's also a global idle flag in the * hardware config which may be more appropriate depending on what * your driver/device needs to do. + * @ap_addr: AP MLD address, or BSSID for non-MLO connections + * (station mode only) */ struct ieee80211_vif_cfg { /* association related data */ bool assoc, ibss_joined; bool ibss_creator; + bool ps; u16 aid; __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN]; @@ -1740,6 +1778,7 @@ struct ieee80211_vif_cfg { size_t ssid_len; bool s1g; bool idle; + u8 ap_addr[ETH_ALEN] __aligned(2); }; /** @@ -1789,7 +1828,7 @@ struct ieee80211_vif { enum nl80211_iftype type; struct ieee80211_vif_cfg cfg; struct ieee80211_bss_conf bss_conf; - struct ieee80211_bss_conf *link_conf[IEEE80211_MLD_MAX_NUM_LINKS]; + struct ieee80211_bss_conf __rcu *link_conf[IEEE80211_MLD_MAX_NUM_LINKS]; u16 valid_links; u8 addr[ETH_ALEN] __aligned(2); bool p2p; @@ -1817,6 +1856,13 @@ struct ieee80211_vif { u8 drv_priv[] __aligned(sizeof(void *)); }; +/* FIXME: for now loop over all the available links; later will be changed + * to loop only over the active links. + */ +#define for_each_vif_active_link(vif, link, link_id) \ + for (link_id = 0; link_id < ARRAY_SIZE((vif)->link_conf); link_id++) \ + if ((link = rcu_dereference((vif)->link_conf[link_id]))) + static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) { #ifdef CONFIG_MAC80211_MESH @@ -2142,6 +2188,7 @@ struct ieee80211_link_sta { * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only * valid if the STA is a TDLS peer in the first place. * @mfp: indicates whether the STA uses management frame protection or not. + * @mlo: indicates whether the STA is MLO station. * @max_amsdu_subframes: indicates the maximal number of MSDUs in a single * A-MSDU. Taken from the Extended Capabilities element. 0 means * unlimited. @@ -2175,6 +2222,7 @@ struct ieee80211_sta { bool tdls; bool tdls_initiator; bool mfp; + bool mlo; u8 max_amsdu_subframes; /** @@ -2207,6 +2255,14 @@ struct ieee80211_sta { u8 drv_priv[] __aligned(sizeof(void *)); }; +/* FIXME: need to loop only over links which are active and check the actual + * lock + */ +#define for_each_sta_active_link(sta, link_sta, link_id) \ + for (link_id = 0; link_id < ARRAY_SIZE((sta)->link); link_id++) \ + if (((link_sta) = rcu_dereference_protected((sta)->link[link_id],\ + 1))) \ + /** * enum sta_notify_cmd - sta notify command * @@ -2489,6 +2545,9 @@ struct ieee80211_txq { * @IEEE80211_HW_DETECTS_COLOR_COLLISION: HW/driver has support for BSS color * collision detection and doesn't need it in software. * + * @IEEE80211_HW_MLO_MCAST_MULTI_LINK_TX: Hardware/driver handles transmitting + * multicast frames on all links, mac80211 should not do that. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2545,6 +2604,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_RX_DECAP_OFFLOAD, IEEE80211_HW_SUPPORTS_CONC_MON_RX_DECAP, IEEE80211_HW_DETECTS_COLOR_COLLISION, + IEEE80211_HW_MLO_MCAST_MULTI_LINK_TX, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -4082,12 +4142,13 @@ struct ieee80211_ops { u64 changed); void (*link_info_changed)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - unsigned int link_id, u64 changed); + struct ieee80211_bss_conf *info, + u64 changed); int (*start_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - unsigned int link_id); + struct ieee80211_bss_conf *link_conf); void (*stop_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - unsigned int link_id); + struct ieee80211_bss_conf *link_conf); u64 (*prepare_multicast)(struct ieee80211_hw *hw, struct netdev_hw_addr_list *mc_list); @@ -4170,7 +4231,8 @@ struct ieee80211_ops { struct ieee80211_sta *sta, struct station_info *sinfo); int (*conf_tx)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 ac, + struct ieee80211_vif *vif, + unsigned int link_id, u16 ac, const struct ieee80211_tx_queue_params *params); u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -4289,11 +4351,11 @@ struct ieee80211_ops { u32 changed); int (*assign_vif_chanctx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - unsigned int link_id, + struct ieee80211_bss_conf *link_conf, struct ieee80211_chanctx_conf *ctx); void (*unassign_vif_chanctx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - unsigned int link_id, + struct ieee80211_bss_conf *link_conf, struct ieee80211_chanctx_conf *ctx); int (*switch_vif_chanctx)(struct ieee80211_hw *hw, struct ieee80211_vif_chanctx_switch *vifs, |