diff options
Diffstat (limited to 'include/linux/pci-epf.h')
| -rw-r--r-- | include/linux/pci-epf.h | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h new file mode 100644 index 000000000000..0d529cb90143 --- /dev/null +++ b/include/linux/pci-epf.h @@ -0,0 +1,162 @@ +/** + * PCI Endpoint *Function* (EPF) header file + * + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + */ + +#ifndef __LINUX_PCI_EPF_H +#define __LINUX_PCI_EPF_H + +#include <linux/device.h> +#include <linux/mod_devicetable.h> + +struct pci_epf; + +enum pci_interrupt_pin { + PCI_INTERRUPT_UNKNOWN, + PCI_INTERRUPT_INTA, + PCI_INTERRUPT_INTB, + PCI_INTERRUPT_INTC, + PCI_INTERRUPT_INTD, +}; + +enum pci_barno { + BAR_0, + BAR_1, + BAR_2, + BAR_3, + BAR_4, + BAR_5, +}; + +/** + * struct pci_epf_header - represents standard configuration header + * @vendorid: identifies device manufacturer + * @deviceid: identifies a particular device + * @revid: specifies a device-specific revision identifier + * @progif_code: identifies a specific register-level programming interface + * @subclass_code: identifies more specifically the function of the device + * @baseclass_code: broadly classifies the type of function the device performs + * @cache_line_size: specifies the system cacheline size in units of DWORDs + * @subsys_vendor_id: vendor of the add-in card or subsystem + * @subsys_id: id specific to vendor + * @interrupt_pin: interrupt pin the device (or device function) uses + */ +struct pci_epf_header { + u16 vendorid; + u16 deviceid; + u8 revid; + u8 progif_code; + u8 subclass_code; + u8 baseclass_code; + u8 cache_line_size; + u16 subsys_vendor_id; + u16 subsys_id; + enum pci_interrupt_pin interrupt_pin; +}; + +/** + * struct pci_epf_ops - set of function pointers for performing EPF operations + * @bind: ops to perform when a EPC device has been bound to EPF device + * @unbind: ops to perform when a binding has been lost between a EPC device + * and EPF device + * @linkup: ops to perform when the EPC device has established a connection with + * a host system + */ +struct pci_epf_ops { + int (*bind)(struct pci_epf *epf); + void (*unbind)(struct pci_epf *epf); + void (*linkup)(struct pci_epf *epf); +}; + +/** + * struct pci_epf_driver - represents the PCI EPF driver + * @probe: ops to perform when a new EPF device has been bound to the EPF driver + * @remove: ops to perform when the binding between the EPF device and EPF + * driver is broken + * @driver: PCI EPF driver + * @ops: set of function pointers for performing EPF operations + * @owner: the owner of the module that registers the PCI EPF driver + * @group: configfs group corresponding to the PCI EPF driver + * @id_table: identifies EPF devices for probing + */ +struct pci_epf_driver { + int (*probe)(struct pci_epf *epf); + int (*remove)(struct pci_epf *epf); + + struct device_driver driver; + struct pci_epf_ops *ops; + struct module *owner; + struct config_group *group; + const struct pci_epf_device_id *id_table; +}; + +#define to_pci_epf_driver(drv) (container_of((drv), struct pci_epf_driver, \ + driver)) + +/** + * struct pci_epf_bar - represents the BAR of EPF device + * @phys_addr: physical address that should be mapped to the BAR + * @size: the size of the address space present in BAR + */ +struct pci_epf_bar { + dma_addr_t phys_addr; + size_t size; +}; + +/** + * struct pci_epf - represents the PCI EPF device + * @dev: the PCI EPF device + * @name: the name of the PCI EPF device + * @header: represents standard configuration header + * @bar: represents the BAR of EPF device + * @msi_interrupts: number of MSI interrupts required by this function + * @func_no: unique function number within this endpoint device + * @epc: the EPC device to which this EPF device is bound + * @driver: the EPF driver to which this EPF device is bound + * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc + */ +struct pci_epf { + struct device dev; + const char *name; + struct pci_epf_header *header; + struct pci_epf_bar bar[6]; + u8 msi_interrupts; + u8 func_no; + + struct pci_epc *epc; + struct pci_epf_driver *driver; + struct list_head list; +}; + +#define to_pci_epf(epf_dev) container_of((epf_dev), struct pci_epf, dev) + +#define pci_epf_register_driver(driver) \ + __pci_epf_register_driver((driver), THIS_MODULE) + +static inline void epf_set_drvdata(struct pci_epf *epf, void *data) +{ + dev_set_drvdata(&epf->dev, data); +} + +static inline void *epf_get_drvdata(struct pci_epf *epf) +{ + return dev_get_drvdata(&epf->dev); +} + +struct pci_epf *pci_epf_create(const char *name); +void pci_epf_destroy(struct pci_epf *epf); +int __pci_epf_register_driver(struct pci_epf_driver *driver, + struct module *owner); +void pci_epf_unregister_driver(struct pci_epf_driver *driver); +void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar); +void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar); +int pci_epf_bind(struct pci_epf *epf); +void pci_epf_unbind(struct pci_epf *epf); +void pci_epf_linkup(struct pci_epf *epf); +#endif /* __LINUX_PCI_EPF_H */ |