diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/typec/Kconfig | 15 | ||||
-rw-r--r-- | drivers/usb/typec/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/typec/typec_wcove.c | 377 |
3 files changed, 393 insertions, 0 deletions
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index 17792f9114c6..dfcfe459b7cf 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -4,4 +4,19 @@ menu "USB Power Delivery and Type-C drivers" config TYPEC tristate +config TYPEC_WCOVE + tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver" + depends on ACPI + depends on INTEL_SOC_PMIC + depends on INTEL_PMC_IPC + depends on BXT_WC_PMIC_OPREGION + select TYPEC + help + This driver adds support for USB Type-C detection on Intel Broxton + platforms that have Intel Whiskey Cove PMIC. The driver can detect the + role and cable orientation. + + To compile this driver as module, choose M here: the module will be + called typec_wcove + endmenu diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile index 1012a8bed6d5..b9cb862221af 100644 --- a/drivers/usb/typec/Makefile +++ b/drivers/usb/typec/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_TYPEC) += typec.o +obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c new file mode 100644 index 000000000000..d5a7b21fa3f1 --- /dev/null +++ b/drivers/usb/typec/typec_wcove.c @@ -0,0 +1,377 @@ +/** + * typec_wcove.c - WhiskeyCove PMIC USB Type-C PHY driver + * + * Copyright (C) 2017 Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/usb/typec.h> +#include <linux/platform_device.h> +#include <linux/mfd/intel_soc_pmic.h> + +/* Register offsets */ +#define WCOVE_CHGRIRQ0 0x4e09 +#define WCOVE_PHYCTRL 0x5e07 + +#define USBC_CONTROL1 0x7001 +#define USBC_CONTROL2 0x7002 +#define USBC_CONTROL3 0x7003 +#define USBC_CC1_CTRL 0x7004 +#define USBC_CC2_CTRL 0x7005 +#define USBC_STATUS1 0x7007 +#define USBC_STATUS2 0x7008 +#define USBC_STATUS3 0x7009 +#define USBC_IRQ1 0x7015 +#define USBC_IRQ2 0x7016 +#define USBC_IRQMASK1 0x7017 +#define USBC_IRQMASK2 0x7018 + +/* Register bits */ + +#define USBC_CONTROL1_MODE_DRP(r) (((r) & ~0x7) | 4) + +#define USBC_CONTROL2_UNATT_SNK BIT(0) +#define USBC_CONTROL2_UNATT_SRC BIT(1) +#define USBC_CONTROL2_DIS_ST BIT(2) + +#define USBC_CONTROL3_PD_DIS BIT(1) + +#define USBC_CC_CTRL_VCONN_EN BIT(1) + +#define USBC_STATUS1_DET_ONGOING BIT(6) +#define USBC_STATUS1_RSLT(r) ((r) & 0xf) +#define USBC_RSLT_NOTHING 0 +#define USBC_RSLT_SRC_DEFAULT 1 +#define USBC_RSLT_SRC_1_5A 2 +#define USBC_RSLT_SRC_3_0A 3 +#define USBC_RSLT_SNK 4 +#define USBC_RSLT_DEBUG_ACC 5 +#define USBC_RSLT_AUDIO_ACC 6 +#define USBC_RSLT_UNDEF 15 +#define USBC_STATUS1_ORIENT(r) (((r) >> 4) & 0x3) +#define USBC_ORIENT_NORMAL 1 +#define USBC_ORIENT_REVERSE 2 + +#define USBC_STATUS2_VBUS_REQ BIT(5) + +#define USBC_IRQ1_ADCDONE1 BIT(2) +#define USBC_IRQ1_OVERTEMP BIT(1) +#define USBC_IRQ1_SHORT BIT(0) + +#define USBC_IRQ2_CC_CHANGE BIT(7) +#define USBC_IRQ2_RX_PD BIT(6) +#define USBC_IRQ2_RX_HR BIT(5) +#define USBC_IRQ2_RX_CR BIT(4) +#define USBC_IRQ2_TX_SUCCESS BIT(3) +#define USBC_IRQ2_TX_FAIL BIT(2) + +#define USBC_IRQMASK1_ALL (USBC_IRQ1_ADCDONE1 | USBC_IRQ1_OVERTEMP | \ + USBC_IRQ1_SHORT) + +#define USBC_IRQMASK2_ALL (USBC_IRQ2_CC_CHANGE | USBC_IRQ2_RX_PD | \ + USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \ + USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL) + +struct wcove_typec { + struct mutex lock; /* device lock */ + struct device *dev; + struct regmap *regmap; + struct typec_port *port; + struct typec_capability cap; + struct typec_partner *partner; +}; + +enum wcove_typec_func { + WCOVE_FUNC_DRIVE_VBUS = 1, + WCOVE_FUNC_ORIENTATION, + WCOVE_FUNC_ROLE, + WCOVE_FUNC_DRIVE_VCONN, +}; + +enum wcove_typec_orientation { + WCOVE_ORIENTATION_NORMAL, + WCOVE_ORIENTATION_REVERSE, +}; + +enum wcove_typec_role { + WCOVE_ROLE_HOST, + WCOVE_ROLE_DEVICE, +}; + +static uuid_le uuid = UUID_LE(0x482383f0, 0x2876, 0x4e49, + 0x86, 0x85, 0xdb, 0x66, 0x21, 0x1a, 0xf0, 0x37); + +static int wcove_typec_func(struct wcove_typec *wcove, + enum wcove_typec_func func, int param) +{ + union acpi_object *obj; + union acpi_object tmp; + union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp); + + tmp.type = ACPI_TYPE_INTEGER; + tmp.integer.value = param; + + obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), uuid.b, 1, func, + &argv4); + if (!obj) { + dev_err(wcove->dev, "%s: failed to evaluate _DSM\n", __func__); + return -EIO; + } + + ACPI_FREE(obj); + return 0; +} + +static irqreturn_t wcove_typec_irq(int irq, void *data) +{ + enum typec_role role = TYPEC_SINK; + struct typec_partner_desc partner; + struct wcove_typec *wcove = data; + unsigned int cc1_ctrl; + unsigned int cc2_ctrl; + unsigned int cc_irq1; + unsigned int cc_irq2; + unsigned int status1; + unsigned int status2; + int ret; + + mutex_lock(&wcove->lock); + + ret = regmap_read(wcove->regmap, USBC_IRQ1, &cc_irq1); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_IRQ2, &cc_irq2); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_STATUS1, &status1); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_STATUS2, &status2); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1_ctrl); + if (ret) + goto err; + + ret = regmap_read(wcove->regmap, USBC_CC2_CTRL, &cc2_ctrl); + if (ret) + goto err; + + if (cc_irq1) { + if (cc_irq1 & USBC_IRQ1_OVERTEMP) + dev_err(wcove->dev, "VCONN Switch Over Temperature!\n"); + if (cc_irq1 & USBC_IRQ1_SHORT) + dev_err(wcove->dev, "VCONN Switch Short Circuit!\n"); + ret = regmap_write(wcove->regmap, USBC_IRQ1, cc_irq1); + if (ret) + goto err; + } + + if (cc_irq2) { + ret = regmap_write(wcove->regmap, USBC_IRQ2, cc_irq2); + if (ret) + goto err; + /* + * Ignoring any PD communication interrupts until the PD support + * is available + */ + if (cc_irq2 & ~USBC_IRQ2_CC_CHANGE) { + dev_WARN(wcove->dev, "USB PD handling missing\n"); + goto err; + } + } + + if (status1 & USBC_STATUS1_DET_ONGOING) + goto out; + + if (USBC_STATUS1_RSLT(status1) == USBC_RSLT_NOTHING) { + if (wcove->partner) { + typec_unregister_partner(wcove->partner); + wcove->partner = NULL; + } + + wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION, + WCOVE_ORIENTATION_NORMAL); + + /* This makes sure the device controller is disconnected */ + wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST); + + /* Port to default role */ + typec_set_data_role(wcove->port, TYPEC_DEVICE); + typec_set_pwr_role(wcove->port, TYPEC_SINK); + typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB); + + goto out; + } + + if (wcove->partner) + goto out; + + switch (USBC_STATUS1_ORIENT(status1)) { + case USBC_ORIENT_NORMAL: + wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION, + WCOVE_ORIENTATION_NORMAL); + break; + case USBC_ORIENT_REVERSE: + wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION, + WCOVE_ORIENTATION_REVERSE); + default: + break; + } + + memset(&partner, 0, sizeof(partner)); + + switch (USBC_STATUS1_RSLT(status1)) { + case USBC_RSLT_SRC_DEFAULT: + typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB); + break; + case USBC_RSLT_SRC_1_5A: + typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_1_5A); + break; + case USBC_RSLT_SRC_3_0A: + typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_3_0A); + break; + case USBC_RSLT_SNK: + role = TYPEC_SOURCE; + break; + case USBC_RSLT_DEBUG_ACC: + partner.accessory = TYPEC_ACCESSORY_DEBUG; + break; + case USBC_RSLT_AUDIO_ACC: + partner.accessory = TYPEC_ACCESSORY_AUDIO; + break; + default: + dev_WARN(wcove->dev, "%s Undefined result\n", __func__); + goto err; + } + + if (role == TYPEC_SINK) { + wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_DEVICE); + typec_set_data_role(wcove->port, TYPEC_DEVICE); + typec_set_pwr_role(wcove->port, TYPEC_SINK); + } else { + wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST); + typec_set_pwr_role(wcove->port, TYPEC_SOURCE); + typec_set_data_role(wcove->port, TYPEC_HOST); + } + + wcove->partner = typec_register_partner(wcove->port, &partner); + if (!wcove->partner) + dev_err(wcove->dev, "failed register partner\n"); +out: + /* If either CC pins is requesting VCONN, we turn it on */ + if ((cc1_ctrl & USBC_CC_CTRL_VCONN_EN) || + (cc2_ctrl & USBC_CC_CTRL_VCONN_EN)) + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, true); + else + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false); + + /* Relying on the FSM to know when we need to drive VBUS. */ + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS, + !!(status2 & USBC_STATUS2_VBUS_REQ)); +err: + /* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */ + regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5)); + + mutex_unlock(&wcove->lock); + return IRQ_HANDLED; +} + +static int wcove_typec_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct wcove_typec *wcove; + unsigned int val; + int ret; + + wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL); + if (!wcove) + return -ENOMEM; + + mutex_init(&wcove->lock); + wcove->dev = &pdev->dev; + wcove->regmap = pmic->regmap; + + ret = regmap_irq_get_virq(pmic->irq_chip_data_level2, + platform_get_irq(pdev, 0)); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(&pdev->dev, ret, NULL, + wcove_typec_irq, IRQF_ONESHOT, + "wcove_typec", wcove); + if (ret) + return ret; + + if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), uuid.b, 0, 0x1f)) { + dev_err(&pdev->dev, "Missing _DSM functions\n"); + return -ENODEV; + } + + wcove->cap.type = TYPEC_PORT_DRP; + wcove->cap.revision = USB_TYPEC_REV_1_1; + wcove->cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + + /* Make sure the PD PHY is disabled until USB PD is available */ + regmap_read(wcove->regmap, USBC_CONTROL3, &val); + regmap_write(wcove->regmap, USBC_CONTROL3, val | USBC_CONTROL3_PD_DIS); + + /* DRP mode without accessory support */ + regmap_read(wcove->regmap, USBC_CONTROL1, &val); + regmap_write(wcove->regmap, USBC_CONTROL1, USBC_CONTROL1_MODE_DRP(val)); + + wcove->port = typec_register_port(&pdev->dev, &wcove->cap); + if (!wcove->port) + return -ENODEV; + + /* Unmask everything */ + regmap_read(wcove->regmap, USBC_IRQMASK1, &val); + regmap_write(wcove->regmap, USBC_IRQMASK1, val & ~USBC_IRQMASK1_ALL); + regmap_read(wcove->regmap, USBC_IRQMASK2, &val); + regmap_write(wcove->regmap, USBC_IRQMASK2, val & ~USBC_IRQMASK2_ALL); + + platform_set_drvdata(pdev, wcove); + return 0; +} + +static int wcove_typec_remove(struct platform_device *pdev) +{ + struct wcove_typec *wcove = platform_get_drvdata(pdev); + unsigned int val; + + /* Mask everything */ + regmap_read(wcove->regmap, USBC_IRQMASK1, &val); + regmap_write(wcove->regmap, USBC_IRQMASK1, val | USBC_IRQMASK1_ALL); + regmap_read(wcove->regmap, USBC_IRQMASK2, &val); + regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL); + + typec_unregister_partner(wcove->partner); + typec_unregister_port(wcove->port); + return 0; +} + +static struct platform_driver wcove_typec_driver = { + .driver = { + .name = "bxt_wcove_usbc", + }, + .probe = wcove_typec_probe, + .remove = wcove_typec_remove, +}; + +module_platform_driver(wcove_typec_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("WhiskeyCove PMIC USB Type-C PHY driver"); +MODULE_ALIAS("platform:bxt_wcove_usbc"); |