diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/regulator/Kconfig | 2 | ||||
-rw-r--r-- | drivers/regulator/da9063-regulator.c | 1 | ||||
-rw-r--r-- | drivers/regulator/helpers.c | 2 | ||||
-rw-r--r-- | drivers/regulator/pfuze100-regulator.c | 60 |
4 files changed, 41 insertions, 24 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8f677f5d79b4..edb1c4f8b496 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -684,7 +684,7 @@ config REGULATOR_MT6323 config REGULATOR_MT6358 tristate "MediaTek MT6358 PMIC" - depends on MFD_MT6397 && BROKEN + depends on MFD_MT6397 help Say y here to select this option to enable the power regulator of MediaTek MT6358 PMIC. diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index e1d6c8f6d40b..fe65b5acaf28 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -512,7 +512,6 @@ static const struct da9063_regulator_info da9063_regulator_info[] = { }, { DA9063_LDO(DA9063, LDO9, 950, 50, 3600), - .suspend = BFIELD(DA9063_REG_LDO9_CONT, DA9063_VLDO9_SEL), }, { DA9063_LDO(DA9063, LDO11, 900, 50, 3600), diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index e970e9d2f8be..e4bb09bbd3fa 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -486,7 +486,7 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, continue; } - ret = selector + sel; + ret = selector + sel - range->min_sel; voltage = rdev->desc->ops->list_voltage(rdev, ret); diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 689537927f6f..4c8e8b472287 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -209,6 +209,19 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = { }; +static const struct regulator_ops pfuze3000_sw_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = pfuze100_set_ramp_delay, + +}; + #define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \ [_chip ## _ ## _name] = { \ .desc = { \ @@ -318,23 +331,28 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x20, \ } - -#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \ - .desc = { \ - .name = #_name,\ - .n_voltages = ((max) - (min)) / (step) + 1, \ - .ops = &pfuze100_sw_regulator_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = _chip ## _ ## _name, \ - .owner = THIS_MODULE, \ - .min_uV = (min), \ - .uV_step = (step), \ - .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ - .vsel_mask = 0x7, \ - }, \ - .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ - .stby_mask = 0x7, \ -} +/* No linar case for the some switches of PFUZE3000 */ +#define PFUZE3000_SW_REG(_chip, _name, base, mask, voltages) \ + [_chip ## _ ## _name] = { \ + .desc = { \ + .name = #_name, \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pfuze3000_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = (mask), \ + .enable_reg = (base) + PFUZE100_MODE_OFFSET, \ + .enable_mask = 0xf, \ + .enable_val = 0x8, \ + .enable_time = 500, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = (mask), \ + .sw_reg = true, \ + } #define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \ .desc = { \ @@ -391,9 +409,9 @@ static struct pfuze_regulator pfuze200_regulators[] = { }; static struct pfuze_regulator pfuze3000_regulators[] = { - PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), + PFUZE3000_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), - PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst), PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), @@ -407,8 +425,8 @@ static struct pfuze_regulator pfuze3000_regulators[] = { }; static struct pfuze_regulator pfuze3001_regulators[] = { - PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), - PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), + PFUZE3000_SW_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), |