diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 48 |
1 files changed, 21 insertions, 27 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 4b59801a0a0c..1286daa1be79 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1502,6 +1502,24 @@ static int lpuart_startup(struct uart_port *port) return 0; } +static void lpuart32_configure(struct lpuart_port *sport) +{ + unsigned long temp; + + if (sport->lpuart_dma_rx_use) { + /* RXWATER must be 0 */ + temp = lpuart32_read(&sport->port, UARTWATER); + temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF); + lpuart32_write(&sport->port, temp, UARTWATER); + } + temp = lpuart32_read(&sport->port, UARTCTRL); + if (!sport->lpuart_dma_rx_use) + temp |= UARTCTRL_RIE; + if (!sport->lpuart_dma_tx_use) + temp |= UARTCTRL_TIE; + lpuart32_write(&sport->port, temp, UARTCTRL); +} + static int lpuart32_startup(struct uart_port *port) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); @@ -1530,18 +1548,7 @@ static int lpuart32_startup(struct uart_port *port) lpuart_rx_dma_startup(sport); lpuart_tx_dma_startup(sport); - if (sport->lpuart_dma_rx_use) { - /* RXWATER must be 0 */ - temp = lpuart32_read(&sport->port, UARTWATER); - temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF); - lpuart32_write(&sport->port, temp, UARTWATER); - } - temp = lpuart32_read(&sport->port, UARTCTRL); - if (!sport->lpuart_dma_rx_use) - temp |= UARTCTRL_RIE; - if (!sport->lpuart_dma_tx_use) - temp |= UARTCTRL_TIE; - lpuart32_write(&sport->port, temp, UARTCTRL); + lpuart32_configure(sport); spin_unlock_irqrestore(&sport->port.lock, flags); return 0; @@ -2579,21 +2586,8 @@ static int lpuart_resume(struct device *dev) lpuart_tx_dma_startup(sport); - if (lpuart_is_32(sport)) { - if (sport->lpuart_dma_rx_use) { - /* RXWATER must be 0 */ - temp = lpuart32_read(&sport->port, UARTWATER); - temp &= ~(UARTWATER_WATER_MASK << - UARTWATER_RXWATER_OFF); - lpuart32_write(&sport->port, temp, UARTWATER); - } - temp = lpuart32_read(&sport->port, UARTCTRL); - if (!sport->lpuart_dma_rx_use) - temp |= UARTCTRL_RIE; - if (!sport->lpuart_dma_tx_use) - temp |= UARTCTRL_TIE; - lpuart32_write(&sport->port, temp, UARTCTRL); - } + if (lpuart_is_32(sport)) + lpuart32_configure(sport); uart_resume_port(&lpuart_reg, &sport->port); |