diff options
Diffstat (limited to 'drivers')
29 files changed, 34 insertions, 34 deletions
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c index 719cb1bc1640..3b7c9f1be484 100644 --- a/drivers/block/paride/pcd.c +++ b/drivers/block/paride/pcd.c @@ -69,8 +69,8 @@ nice This parameter controls the driver's use of idle CPU time, at the expense of some speed. - If this driver is built into the kernel, you can use kernel - the following command line parameters, with the same values + If this driver is built into the kernel, you can use the + following kernel command line parameters, with the same values as the corresponding module parameters listed above: pcd.drive0 diff --git a/drivers/crypto/qat/qat_common/adf_ctl_drv.c b/drivers/crypto/qat/qat_common/adf_ctl_drv.c index d97069b8a8e4..6a92284a86b2 100644 --- a/drivers/crypto/qat/qat_common/adf_ctl_drv.c +++ b/drivers/crypto/qat/qat_common/adf_ctl_drv.c @@ -436,7 +436,7 @@ static long adf_ctl_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) ret = adf_ctl_ioctl_get_status(fp, cmd, arg); break; default: - pr_err("QAT: Invalid ioclt\n"); + pr_err("QAT: Invalid ioctl\n"); ret = -EFAULT; break; } diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index eee79e1c3222..afcc8dd40bdd 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -946,7 +946,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n", port_name(port)); if (is_dvi && (port == PORT_A || port == PORT_E)) - DRM_DEBUG_KMS("Port %c is TMDS compabile\n", port_name(port)); + DRM_DEBUG_KMS("Port %c is TMDS compatible\n", port_name(port)); if (!is_dvi && !is_dp && !is_crt) DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n", port_name(port)); diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 2ac87fa3058d..2e45ae3796f1 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -357,7 +357,7 @@ config I2C_BCM_KONA If you say yes to this option, support will be included for the I2C interface on the Broadcom Kona family of processors. - If you do not need KONA I2C inteface, say N. + If you do not need KONA I2C interface, say N. config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index e086fb075f2b..e3b0337faeb7 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -244,7 +244,7 @@ static bool is_ack(struct s3c24xx_i2c *i2c) } usleep_range(1000, 2000); } - dev_err(i2c->dev, "ack was not recieved\n"); + dev_err(i2c->dev, "ack was not received\n"); return false; } diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index 8f5f2577f288..e8b8569788c0 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -1870,7 +1870,7 @@ static int ocrdma_build_inline_sges(struct ocrdma_qp *qp, hdr->total_len = ocrdma_sglist_len(wr->sg_list, wr->num_sge); if (unlikely(hdr->total_len > qp->max_inline_data)) { pr_err("%s() supported_len=0x%x,\n" - " unspported len req=0x%x\n", __func__, + " unsupported len req=0x%x\n", __func__, qp->max_inline_data, hdr->total_len); return -EINVAL; } diff --git a/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c b/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c index f8dfd76be89f..db3588df3546 100644 --- a/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c +++ b/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c @@ -511,7 +511,7 @@ int usnic_ib_qp_grp_modify(struct usnic_ib_qp_grp *qp_grp, usnic_ib_qp_grp_state_to_string(old_state), usnic_ib_qp_grp_state_to_string(new_state)); } else { - usnic_err("Failed to transistion %u from %s to %s", + usnic_err("Failed to transition %u from %s to %s", qp_grp->grp_id, usnic_ib_qp_grp_state_to_string(old_state), usnic_ib_qp_grp_state_to_string(new_state)); diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index b8632bf9a7f3..a31a9e40eed9 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -109,7 +109,7 @@ config XTENSA_MX config IRQ_CROSSBAR bool help - Support for a CROSSBAR ip that preceeds the main interrupt controller. + Support for a CROSSBAR ip that precedes the main interrupt controller. The primary irqchip invokes the crossbar's callback which inturn allocates a free irq and configures the IP. Thus the peripheral interrupts are routed to one of the free irqchip interrupt lines. diff --git a/drivers/media/i2c/cx25840/cx25840-ir.c b/drivers/media/i2c/cx25840/cx25840-ir.c index e6588ee5bdb0..4cf8f18bf097 100644 --- a/drivers/media/i2c/cx25840/cx25840-ir.c +++ b/drivers/media/i2c/cx25840/cx25840-ir.c @@ -224,7 +224,7 @@ static inline unsigned int lpf_count_to_us(unsigned int count) } /* - * FIFO register pulse width count compuations + * FIFO register pulse width count computations */ static u32 clock_divider_to_resolution(u16 divider) { diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c index 2c951dec2d33..c2ff5fc01157 100644 --- a/drivers/media/pci/cx23885/cx23888-ir.c +++ b/drivers/media/pci/cx23885/cx23888-ir.c @@ -263,7 +263,7 @@ static inline unsigned int lpf_count_to_us(unsigned int count) } /* - * FIFO register pulse width count compuations + * FIFO register pulse width count computations */ static u32 clock_divider_to_resolution(u16 divider) { diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c b/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c index e60cbb3aa609..f86cec091bf4 100644 --- a/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c +++ b/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c @@ -259,7 +259,7 @@ static int vv6410_set_exposure(struct gspca_dev *gspca_dev, __s32 val) fine = val % VV6410_CIF_LINELENGTH; coarse = min(512, val / VV6410_CIF_LINELENGTH); - PDEBUG(D_CONF, "Set coarse exposure to %d, fine expsure to %d", + PDEBUG(D_CONF, "Set coarse exposure to %d, fine exposure to %d", coarse, fine); err = stv06xx_write_sensor(sd, VV6410_FINEH, fine >> 8); diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index a0e9422b55a2..959c313d84a7 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -424,7 +424,7 @@ static int mei_me_pm_runtime_resume(struct device *device) } /** - * mei_me_set_pm_domain - fill and set pm domian stucture for device + * mei_me_set_pm_domain - fill and set pm domain structure for device * * @dev: mei_device */ @@ -444,7 +444,7 @@ static inline void mei_me_set_pm_domain(struct mei_device *dev) } /** - * mei_me_unset_pm_domain - clean pm domian stucture for device + * mei_me_unset_pm_domain - clean pm domain structure for device * * @dev: mei_device */ diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c index 19de57368b7a..74727dda51c1 100644 --- a/drivers/misc/mei/pci-txe.c +++ b/drivers/misc/mei/pci-txe.c @@ -371,7 +371,7 @@ static int mei_txe_pm_runtime_resume(struct device *device) } /** - * mei_txe_set_pm_domain - fill and set pm domian stucture for device + * mei_txe_set_pm_domain - fill and set pm domain structure for device * * @dev: mei_device */ @@ -391,7 +391,7 @@ static inline void mei_txe_set_pm_domain(struct mei_device *dev) } /** - * mei_txe_unset_pm_domain - clean pm domian stucture for device + * mei_txe_unset_pm_domain - clean pm domain structure for device * * @dev: mei_device */ diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c index 5cd532ca1cfe..b01b0ce4d1be 100644 --- a/drivers/net/bonding/bond_sysfs_slave.c +++ b/drivers/net/bonding/bond_sysfs_slave.c @@ -36,7 +36,7 @@ static ssize_t state_show(struct slave *slave, char *buf) case BOND_STATE_BACKUP: return sprintf(buf, "backup\n"); default: - return sprintf(buf, "UNKONWN\n"); + return sprintf(buf, "UNKNOWN\n"); } } static SLAVE_ATTR_RO(state); diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 02a2e90d581a..923c4878461e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -1695,7 +1695,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave) if (err) { vp_oper->vlan_idx = NO_INDX; mlx4_warn(&priv->dev, - "No vlan resorces slave %d, port %d\n", + "No vlan resources slave %d, port %d\n", slave, port); return err; } @@ -1711,7 +1711,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave) err = vp_oper->mac_idx; vp_oper->mac_idx = NO_INDX; mlx4_warn(&priv->dev, - "No mac resorces slave %d, port %d\n", + "No mac resources slave %d, port %d\n", slave, port); return err; } diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c index db4280ce9c09..716fc37ada5a 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c @@ -922,7 +922,7 @@ int netxen_config_ipaddr(struct netxen_adapter *adapter, __be32 ip, int cmd) rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1); if (rv != 0) { - printk(KERN_ERR "%s: could not notify %s IP 0x%x reuqest\n", + printk(KERN_ERR "%s: could not notify %s IP 0x%x request\n", adapter->netdev->name, (cmd == NX_IP_UP) ? "Add" : "Remove", ip); } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 851cb4a80d50..03cd4c3d7835 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -941,7 +941,7 @@ void qlcnic_82xx_config_ipaddr(struct qlcnic_adapter *adapter, rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1); if (rv != 0) dev_err(&adapter->netdev->dev, - "could not notify %s IP 0x%x reuqest\n", + "could not notify %s IP 0x%x request\n", (cmd == QLCNIC_IP_UP) ? "Add" : "Remove", ip); } diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index f5fbc12d3e10..a43e8492b1ce 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -2056,7 +2056,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx) struct sk_buff *skb; if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { - VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->netdev->name); + VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame spans multiple RDs.\n", vptr->netdev->name); stats->rx_length_errors++; return -EINVAL; } diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 47a998d8f99e..40ab7f0b7be0 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -1353,7 +1353,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, wait_event_interruptible_timeout(priv->scan_q, (priv->scan_req == NULL), (15 * HZ)); - lbs_deb_assoc("assoc: scanning competed\n"); + lbs_deb_assoc("assoc: scanning completed\n"); } /* Find the BSS we want using available scan results */ diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 088de9d25c39..25c5acc78bd1 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -332,7 +332,7 @@ static int lbtf_op_start(struct ieee80211_hw *hw) err_prog_firmware: priv->hw_reset_device(card); - lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programing fw; ret=%d", ret); + lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programming fw; ret=%d", ret); return ret; } diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 3bbcbf12c1fb..4dcfb7116a04 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -540,7 +540,7 @@ config ASUS_NB_WMI This is a driver for newer Asus notebooks. It adds extra features like wireless radio and bluetooth control, leds, hotkeys, backlight... - For more informations, see + For more information, see <file:Documentation/ABI/testing/sysfs-platform-asus-wmi> If you have an ACPI-WMI compatible Asus Notebook, say Y or M @@ -553,7 +553,7 @@ config EEEPC_WMI This is a driver for newer Eee PC laptops. It adds extra features like wireless radio and bluetooth control, leds, hotkeys, backlight... - For more informations, see + For more information, see <file:Documentation/ABI/testing/sysfs-platform-asus-wmi> If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx index 6739069477de..3b3d599103f8 100644 --- a/drivers/scsi/aic7xxx/Kconfig.aic79xx +++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx @@ -70,7 +70,7 @@ config AIC79XX_DEBUG_MASK default "0" help Bit mask of debug options that is only valid if the - CONFIG_AIC79XX_DEBUG_ENBLE option is enabled. The bits in this mask + CONFIG_AIC79XX_DEBUG_ENABLE option is enabled. The bits in this mask are defined in the drivers/scsi/aic7xxx/aic79xx.h - search for the variable ahd_debug in that file to find them. diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c index 2c613bdea78f..5980c10c734d 100644 --- a/drivers/scsi/fnic/fnic_debugfs.c +++ b/drivers/scsi/fnic/fnic_debugfs.c @@ -210,7 +210,7 @@ static ssize_t fnic_trace_ctrl_write(struct file *filp, else if (*trace_type == fc_trc_flag->fc_clear) fnic_fc_trace_cleared = val; else - pr_err("fnic: cannot write to any debufs file\n"); + pr_err("fnic: cannot write to any debugfs file\n"); (*ppos)++; diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c index c77285926827..8b1b38751b49 100644 --- a/drivers/scsi/fnic/fnic_trace.c +++ b/drivers/scsi/fnic/fnic_trace.c @@ -592,7 +592,7 @@ int fnic_fc_trace_set_data(u32 host_no, u8 frame_type, if (fnic_fc_trace_cleared == 1) { fc_trace_entries.rd_idx = fc_trace_entries.wr_idx = 0; - pr_info("fnic: Reseting the read idx\n"); + pr_info("fnic: Resetting the read idx\n"); memset((void *)fnic_fc_ctlr_trace_buf_p, 0, fnic_fc_trace_max_pages * PAGE_SIZE); fnic_fc_trace_cleared = 0; diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 50b086aef178..53284eb23a15 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -930,7 +930,7 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct s /* check target ID is not same as this initiator ID */ if (scmd_id(SCpnt) == SCpnt->device->host->this_id) { - nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???"); + nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "target==host???"); SCpnt->result = DID_BAD_TARGET << 16; done(SCpnt); return 0; diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 340ceff03823..34aad32829f5 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -533,7 +533,7 @@ static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask, } while ((--time_out != 0) && (reg & mask) != 0); if (time_out == 0) { - nsp_msg(KERN_DEBUG, " %s signal off timeut", str); + nsp_msg(KERN_DEBUG, " %s signal off timeout", str); } return 0; diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c index da9e3902f219..24a852828b5d 100644 --- a/drivers/scsi/qla2xxx/qla_nx2.c +++ b/drivers/scsi/qla2xxx/qla_nx2.c @@ -399,7 +399,7 @@ qla8044_idc_lock(struct qla_hw_data *ha) */ ql_dbg(ql_dbg_p3p, vha, 0xb08a, "%s: IDC lock Recovery by %d " - "failed, Retrying timout\n", __func__, + "failed, Retrying timeout\n", __func__, ha->portnum); timeout = 0; } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 82800a775501..56f4336ffa86 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -126,7 +126,7 @@ config XPS_USB_HCD_XILINX select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO ---help--- - Xilinx xps USB host controller core is EHCI compilant and has + Xilinx xps USB host controller core is EHCI compliant and has transaction translator built-in. It can be configured to either support both high speed and full speed devices, or high speed devices only. diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c index 7db5234462d0..a6f7cc0a0883 100644 --- a/drivers/video/backlight/88pm860x_bl.c +++ b/drivers/video/backlight/88pm860x_bl.c @@ -216,7 +216,7 @@ static int pm860x_backlight_probe(struct platform_device *pdev) data->reg_duty_cycle = res->start; res = platform_get_resource_byname(pdev, IORESOURCE_REG, "always on"); if (!res) { - dev_err(&pdev->dev, "No REG resorce for always on\n"); + dev_err(&pdev->dev, "No REG resource for always on\n"); return -ENXIO; } data->reg_always_on = res->start; |