diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/tty/serial/8250/8250_dwlib.c | 126 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_dwlib.h | 19 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Kconfig | 3 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Makefile | 1 |
4 files changed, 149 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c new file mode 100644 index 000000000000..6d6a78eead3e --- /dev/null +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Synopsys DesignWare 8250 library. */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> + +#include "8250_dwlib.h" + +/* Offsets for the DesignWare specific registers */ +#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */ +#define DW_UART_CPR 0xf4 /* Component Parameter Register */ +#define DW_UART_UCV 0xf8 /* UART Component Version */ + +/* Component Parameter Register bits */ +#define DW_UART_CPR_ABP_DATA_WIDTH (3 << 0) +#define DW_UART_CPR_AFCE_MODE (1 << 4) +#define DW_UART_CPR_THRE_MODE (1 << 5) +#define DW_UART_CPR_SIR_MODE (1 << 6) +#define DW_UART_CPR_SIR_LP_MODE (1 << 7) +#define DW_UART_CPR_ADDITIONAL_FEATURES (1 << 8) +#define DW_UART_CPR_FIFO_ACCESS (1 << 9) +#define DW_UART_CPR_FIFO_STAT (1 << 10) +#define DW_UART_CPR_SHADOW (1 << 11) +#define DW_UART_CPR_ENCODED_PARMS (1 << 12) +#define DW_UART_CPR_DMA_EXTRA (1 << 13) +#define DW_UART_CPR_FIFO_MODE (0xff << 16) + +/* Helper for FIFO size calculation */ +#define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16) + +static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) +{ + if (p->iotype == UPIO_MEM32BE) + return ioread32be(p->membase + offset); + return readl(p->membase + offset); +} + +static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg) +{ + if (p->iotype == UPIO_MEM32BE) + iowrite32be(reg, p->membase + offset); + else + writel(reg, p->membase + offset); +} + +/* + * divisor = div(I) + div(F) + * "I" means integer, "F" means fractional + * quot = div(I) = clk / (16 * baud) + * frac = div(F) * 2^dlf_size + * + * let rem = clk % (16 * baud) + * we have: div(F) * (16 * baud) = rem + * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud) + */ +static unsigned int dw8250_get_divisor(struct uart_port *p, unsigned int baud, + unsigned int *frac) +{ + unsigned int quot, rem, base_baud = baud * 16; + struct dw8250_port_data *d = p->private_data; + + quot = p->uartclk / base_baud; + rem = p->uartclk % base_baud; + *frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud); + + return quot; +} + +static void dw8250_set_divisor(struct uart_port *p, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + dw8250_writel_ext(p, DW_UART_DLF, quot_frac); + serial8250_do_set_divisor(p, baud, quot, quot_frac); +} + +void dw8250_setup_port(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + u32 reg; + + /* + * If the Component Version Register returns zero, we know that + * ADDITIONAL_FEATURES are not enabled. No need to go any further. + */ + reg = dw8250_readl_ext(p, DW_UART_UCV); + if (!reg) + return; + + dev_dbg(p->dev, "Designware UART version %c.%c%c\n", + (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); + + dw8250_writel_ext(p, DW_UART_DLF, ~0U); + reg = dw8250_readl_ext(p, DW_UART_DLF); + dw8250_writel_ext(p, DW_UART_DLF, 0); + + if (reg) { + struct dw8250_port_data *d = p->private_data; + + d->dlf_size = fls(reg); + p->get_divisor = dw8250_get_divisor; + p->set_divisor = dw8250_set_divisor; + } + + reg = dw8250_readl_ext(p, DW_UART_CPR); + if (!reg) + return; + + /* Select the type based on FIFO */ + if (reg & DW_UART_CPR_FIFO_MODE) { + p->type = PORT_16550A; + p->flags |= UPF_FIXED_TYPE; + p->fifosize = DW_UART_CPR_FIFO_SIZE(reg); + up->capabilities = UART_CAP_FIFO; + } + + if (reg & DW_UART_CPR_AFCE_MODE) + up->capabilities |= UART_CAP_AFE; + + if (reg & DW_UART_CPR_SIR_MODE) + up->capabilities |= UART_CAP_IRDA; +} +EXPORT_SYMBOL_GPL(dw8250_setup_port); diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h new file mode 100644 index 000000000000..87a4db2a8aba --- /dev/null +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Synopsys DesignWare 8250 library header file. */ + +#include <linux/types.h> + +#include "8250.h" + +struct dw8250_port_data { + /* Port properties */ + int line; + + /* DMA operations */ + struct uart_8250_dma dma; + + /* Hardware configuration */ + u8 dlf_size; +}; + +void dw8250_setup_port(struct uart_port *p); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 509f6a3bb9ff..d628258fb4cf 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -314,6 +314,9 @@ config SERIAL_8250_RSA If you don't have such card, or if unsure, say N. +config SERIAL_8250_DWLIB + bool + config SERIAL_8250_ACORN tristate "Acorn expansion card serial port support" depends on ARCH_ACORN && SERIAL_8250 diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 18751bc63a84..9b451d81588b 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o 8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o 8250_base-y := 8250_port.o 8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o +8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o 8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o |