1 files changed, 0 insertions, 81 deletions
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h
deleted file mode 100644
index 5b149915b0f8..000000000000
--- a/drivers/usb/musb/blackfin.h
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 by Analog Devices, Inc.
- */
-
-#ifndef __MUSB_BLACKFIN_H__
-#define __MUSB_BLACKFIN_H__
-
-/*
- * Blackfin specific definitions
- */
-
-/* Anomalies notes:
- *
- *  05000450 - USB DMA Mode 1 Short Packet Data Corruption:
- *             MUSB driver is designed to transfer buffer of N * maxpacket size
- *             in DMA mode 1 and leave the rest of the data to the next
- *             transfer in DMA mode 0, so we never transmit a short packet in
- *             DMA mode 1.
- *
- *  05000463 - This anomaly doesn't affect this driver since it
- *             never uses L1 or L2 memory as data destination.
- *
- *  05000464 - This anomaly doesn't affect this driver since it
- *             never uses L1 or L2 memory as data source.
- *
- *  05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is
- *             no way to workaround for bulk endpoints.  Since the wMaxPackSize
- *             of bulk is less than or equal to 512, while the fifo size of
- *             endpoint 5, 6, 7 is 1024, the double buffer mode is enabled
- *             automatically when these endpoints are used for bulk OUT.
- *
- *  05000466 - This anomaly doesn't affect this driver since it never mixes
- *             concurrent DMA and core accesses to the TX endpoint FIFOs.
- *
- *  05000467 - The workaround for this anomaly will introduce another
- *             anomaly - 05000465.
- */
-
-/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be
- * unstable in host mode.  This may be caused by Anomaly 05000380.  After
- * digging out the root cause, we will change this number accordingly.
- * So, need to either use silicon v0.2+ or disable DMA mode in MUSB.
- */
-#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \
-	!defined(CONFIG_MUSB_PIO_ONLY)
-# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1"
-#endif
-
-#undef DUMP_FIFO_DATA
-#ifdef DUMP_FIFO_DATA
-static void dump_fifo_data(u8 *buf, u16 len)
-{
-	u8 *tmp = buf;
-	int i;
-
-	for (i = 0; i < len; i++) {
-		if (!(i % 16) && i)
-			pr_debug("\n");
-		pr_debug("%02x ", *tmp++);
-	}
-	pr_debug("\n");
-}
-#else
-#define dump_fifo_data(buf, len)	do {} while (0)
-#endif
-
-
-#define USB_DMA_BASE		USB_DMA_INTERRUPT
-#define USB_DMAx_CTRL		0x04
-#define USB_DMAx_ADDR_LOW	0x08
-#define USB_DMAx_ADDR_HIGH	0x0C
-#define USB_DMAx_COUNT_LOW	0x10
-#define USB_DMAx_COUNT_HIGH	0x14
-
-#define USB_DMA_REG(ep, reg)	(USB_DMA_BASE + 0x20 * ep + reg)
-
-/* Almost 1 second */
-#define TIMER_DELAY	(1 * HZ)
-
-#endif	/* __MUSB_BLACKFIN_H__ */