diff options
Diffstat (limited to 'drivers/usb/gadget/mv_udc_core.c')
-rw-r--r-- | drivers/usb/gadget/mv_udc_core.c | 560 |
1 files changed, 446 insertions, 114 deletions
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index 0b3b8d0462db..892412103dd8 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -1,3 +1,14 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * Author: Chao Xie <chao.xie@marvell.com> + * Neil Zhang <zhangwm@marvell.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + #include <linux/module.h> #include <linux/pci.h> #include <linux/dma-mapping.h> @@ -22,6 +33,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/platform_data/mv_usb.h> #include <asm/system.h> #include <asm/unaligned.h> @@ -45,6 +57,8 @@ #define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) #define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) +static DECLARE_COMPLETION(release_done); + static const char driver_name[] = "mv_udc"; static const char driver_desc[] = DRIVER_DESC; @@ -53,6 +67,7 @@ static struct mv_udc *the_controller; int mv_usb_otgsc; static void nuke(struct mv_ep *ep, int status); +static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver); /* for endpoint 0 operations */ static const struct usb_endpoint_descriptor mv_ep0_desc = { @@ -82,14 +97,16 @@ static void ep0_reset(struct mv_udc *udc) (EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) | EP_QUEUE_HEAD_IOS; + ep->dqh->next_dtd_ptr = EP_QUEUE_HEAD_NEXT_TERMINATE; + epctrlx = readl(&udc->op_regs->epctrlx[0]); if (i) { /* TX */ - epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST + epctrlx |= EPCTRL_TX_ENABLE | (USB_ENDPOINT_XFER_CONTROL << EPCTRL_TX_EP_TYPE_SHIFT); } else { /* RX */ - epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST + epctrlx |= EPCTRL_RX_ENABLE | (USB_ENDPOINT_XFER_CONTROL << EPCTRL_RX_EP_TYPE_SHIFT); } @@ -122,6 +139,7 @@ static int process_ep_req(struct mv_udc *udc, int index, int i, direction; int retval = 0; u32 errors; + u32 bit_pos; curr_dqh = &udc->ep_dqh[index]; direction = index % 2; @@ -139,10 +157,20 @@ static int process_ep_req(struct mv_udc *udc, int index, errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK; if (!errors) { - remaining_length += + remaining_length = (curr_dtd->size_ioc_sts & DTD_PACKET_SIZE) >> DTD_LENGTH_BIT_POS; actual -= remaining_length; + + if (remaining_length) { + if (direction) { + dev_dbg(&udc->dev->dev, + "TX dTD remains data\n"); + retval = -EPROTO; + break; + } else + break; + } } else { dev_info(&udc->dev->dev, "complete_tr error: ep=%d %s: error = 0x%x\n", @@ -164,6 +192,20 @@ static int process_ep_req(struct mv_udc *udc, int index, if (retval) return retval; + if (direction == EP_DIR_OUT) + bit_pos = 1 << curr_req->ep->ep_num; + else + bit_pos = 1 << (16 + curr_req->ep->ep_num); + + while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) { + if (curr_dtd->dtd_next == EP_QUEUE_HEAD_NEXT_TERMINATE) { + while (readl(&udc->op_regs->epstatus) & bit_pos) + udelay(1); + break; + } + udelay(1); + } + curr_req->req.actual = actual; return 0; @@ -481,6 +523,7 @@ static int mv_ep_enable(struct usb_ep *_ep, u16 max = 0; u32 bit_pos, epctrlx, direction; unsigned char zlt = 0, ios = 0, mult = 0; + unsigned long flags; ep = container_of(_ep, struct mv_ep, ep); udc = ep->udc; @@ -493,7 +536,7 @@ static int mv_ep_enable(struct usb_ep *_ep, return -ESHUTDOWN; direction = ep_dir(ep); - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* * disable HW zero length termination select @@ -501,9 +544,6 @@ static int mv_ep_enable(struct usb_ep *_ep, */ zlt = 1; - /* Get the endpoint queue head address */ - dqh = (struct mv_dqh *)ep->dqh; - bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); /* Check if the Endpoint is Primed */ @@ -532,7 +572,7 @@ static int mv_ep_enable(struct usb_ep *_ep, case USB_ENDPOINT_XFER_ISOC: /* Calculate transactions needed for high bandwidth iso */ mult = (unsigned char)(1 + ((max >> 11) & 0x03)); - max = max & 0x8ff; /* bit 0~10 */ + max = max & 0x7ff; /* bit 0~10 */ /* 3 transactions at most */ if (mult > 3) goto en_done; @@ -540,6 +580,10 @@ static int mv_ep_enable(struct usb_ep *_ep, default: goto en_done; } + + spin_lock_irqsave(&udc->lock, flags); + /* Get the endpoint queue head address */ + dqh = ep->dqh; dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) | (mult << EP_QUEUE_HEAD_MULT_POS) | (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0) @@ -572,18 +616,20 @@ static int mv_ep_enable(struct usb_ep *_ep, */ epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); if ((epctrlx & EPCTRL_RX_ENABLE) == 0) { - epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + epctrlx |= (USB_ENDPOINT_XFER_BULK << EPCTRL_RX_EP_TYPE_SHIFT); writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); } epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); if ((epctrlx & EPCTRL_TX_ENABLE) == 0) { - epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + epctrlx |= (USB_ENDPOINT_XFER_BULK << EPCTRL_TX_EP_TYPE_SHIFT); writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); } + spin_unlock_irqrestore(&udc->lock, flags); + return 0; en_done: return -EINVAL; @@ -595,6 +641,7 @@ static int mv_ep_disable(struct usb_ep *_ep) struct mv_ep *ep; struct mv_dqh *dqh; u32 bit_pos, epctrlx, direction; + unsigned long flags; ep = container_of(_ep, struct mv_ep, ep); if ((_ep == NULL) || !ep->desc) @@ -605,6 +652,8 @@ static int mv_ep_disable(struct usb_ep *_ep) /* Get the endpoint queue head address */ dqh = ep->dqh; + spin_lock_irqsave(&udc->lock, flags); + direction = ep_dir(ep); bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); @@ -623,6 +672,9 @@ static int mv_ep_disable(struct usb_ep *_ep) ep->desc = NULL; ep->stopped = 1; + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; } @@ -655,37 +707,28 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) { struct mv_udc *udc; u32 bit_pos, direction; - struct mv_ep *ep = container_of(_ep, struct mv_ep, ep); + struct mv_ep *ep; unsigned int loops; + if (!_ep) + return; + + ep = container_of(_ep, struct mv_ep, ep); + if (!ep->desc) + return; + udc = ep->udc; direction = ep_dir(ep); - bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); - /* - * Flushing will halt the pipe - * Write 1 to the Flush register - */ - writel(bit_pos, &udc->op_regs->epflush); - /* Wait until flushing completed */ - loops = LOOPS(FLUSH_TIMEOUT); - while (readl(&udc->op_regs->epflush) & bit_pos) { - /* - * ENDPTFLUSH bit should be cleared to indicate this - * operation is complete - */ - if (loops == 0) { - dev_err(&udc->dev->dev, - "TIMEOUT for ENDPTFLUSH=0x%x, bit_pos=0x%x\n", - (unsigned)readl(&udc->op_regs->epflush), - (unsigned)bit_pos); - return; - } - loops--; - udelay(LOOPS_USEC); - } + if (ep->ep_num == 0) + bit_pos = (1 << 16) | 1; + else if (direction == EP_DIR_OUT) + bit_pos = 1 << ep->ep_num; + else + bit_pos = 1 << (16 + ep->ep_num); + loops = LOOPS(EPSTATUS_TIMEOUT); - while (readl(&udc->op_regs->epstatus) & bit_pos) { + do { unsigned int inter_loops; if (loops == 0) { @@ -700,7 +743,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) /* Wait until flushing completed */ inter_loops = LOOPS(FLUSH_TIMEOUT); - while (readl(&udc->op_regs->epflush) & bit_pos) { + while (readl(&udc->op_regs->epflush)) { /* * ENDPTFLUSH bit should be cleared to indicate this * operation is complete @@ -717,7 +760,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) udelay(LOOPS_USEC); } loops--; - } + } while (readl(&udc->op_regs->epstatus) & bit_pos); } /* queues (submits) an I/O request to an endpoint */ @@ -987,6 +1030,22 @@ static struct usb_ep_ops mv_ep_ops = { .fifo_flush = mv_ep_fifo_flush, /* flush fifo */ }; +static void udc_clock_enable(struct mv_udc *udc) +{ + unsigned int i; + + for (i = 0; i < udc->clknum; i++) + clk_enable(udc->clk[i]); +} + +static void udc_clock_disable(struct mv_udc *udc) +{ + unsigned int i; + + for (i = 0; i < udc->clknum; i++) + clk_disable(udc->clk[i]); +} + static void udc_stop(struct mv_udc *udc) { u32 tmp; @@ -1075,6 +1134,40 @@ static int udc_reset(struct mv_udc *udc) return 0; } +static int mv_udc_enable(struct mv_udc *udc) +{ + int retval; + + if (udc->clock_gating == 0 || udc->active) + return 0; + + dev_dbg(&udc->dev->dev, "enable udc\n"); + udc_clock_enable(udc); + if (udc->pdata->phy_init) { + retval = udc->pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&udc->dev->dev, + "init phy error %d\n", retval); + udc_clock_disable(udc); + return retval; + } + } + udc->active = 1; + + return 0; +} + +static void mv_udc_disable(struct mv_udc *udc) +{ + if (udc->clock_gating && udc->active) { + dev_dbg(&udc->dev->dev, "disable udc\n"); + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); + udc->active = 0; + } +} + static int mv_udc_get_frame(struct usb_gadget *gadget) { struct mv_udc *udc; @@ -1110,22 +1203,68 @@ static int mv_udc_wakeup(struct usb_gadget *gadget) return 0; } +static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct mv_udc *udc; + unsigned long flags; + int retval = 0; + + udc = container_of(gadget, struct mv_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + + dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, udc->softconnect, udc->vbus_active); + + udc->vbus_active = (is_active != 0); + if (udc->driver && udc->softconnect && udc->vbus_active) { + retval = mv_udc_enable(udc); + if (retval == 0) { + /* Clock is disabled, need re-init registers */ + udc_reset(udc); + ep0_reset(udc); + udc_start(udc); + } + } else if (udc->driver && udc->softconnect) { + /* stop all the transfer in queue*/ + stop_activity(udc, udc->driver); + udc_stop(udc); + mv_udc_disable(udc); + } + + spin_unlock_irqrestore(&udc->lock, flags); + return retval; +} + static int mv_udc_pullup(struct usb_gadget *gadget, int is_on) { struct mv_udc *udc; unsigned long flags; + int retval = 0; udc = container_of(gadget, struct mv_udc, gadget); spin_lock_irqsave(&udc->lock, flags); + dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, udc->softconnect, udc->vbus_active); + udc->softconnect = (is_on != 0); - if (udc->driver && udc->softconnect) - udc_start(udc); - else + if (udc->driver && udc->softconnect && udc->vbus_active) { + retval = mv_udc_enable(udc); + if (retval == 0) { + /* Clock is disabled, need re-init registers */ + udc_reset(udc); + ep0_reset(udc); + udc_start(udc); + } + } else if (udc->driver && udc->vbus_active) { + /* stop all the transfer in queue*/ + stop_activity(udc, udc->driver); udc_stop(udc); + mv_udc_disable(udc); + } spin_unlock_irqrestore(&udc->lock, flags); - return 0; + return retval; } static int mv_udc_start(struct usb_gadget_driver *driver, @@ -1140,17 +1279,15 @@ static const struct usb_gadget_ops mv_ops = { /* tries to wake up the host connected to this gadget */ .wakeup = mv_udc_wakeup, + /* notify controller that VBUS is powered or not */ + .vbus_session = mv_udc_vbus_session, + /* D+ pullup, software-controlled connect/disconnect to USB host */ .pullup = mv_udc_pullup, .start = mv_udc_start, .stop = mv_udc_stop, }; -static void mv_udc_testmode(struct mv_udc *udc, u16 index, bool enter) -{ - dev_info(&udc->dev->dev, "Test Mode is not support yet\n"); -} - static int eps_init(struct mv_udc *udc) { struct mv_ep *ep; @@ -1257,7 +1394,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver, udc->usb_state = USB_STATE_ATTACHED; udc->ep0_state = WAIT_FOR_SETUP; - udc->ep0_dir = USB_DIR_OUT; + udc->ep0_dir = EP_DIR_OUT; spin_unlock_irqrestore(&udc->lock, flags); @@ -1269,9 +1406,13 @@ static int mv_udc_start(struct usb_gadget_driver *driver, udc->gadget.dev.driver = NULL; return retval; } - udc_reset(udc); - ep0_reset(udc); - udc_start(udc); + + /* pullup is always on */ + mv_udc_pullup(&udc->gadget, 1); + + /* When boot with cable attached, there will be no vbus irq occurred */ + if (udc->qwork) + queue_work(udc->qwork, &udc->vbus_work); return 0; } @@ -1284,13 +1425,16 @@ static int mv_udc_stop(struct usb_gadget_driver *driver) if (!udc) return -ENODEV; - udc_stop(udc); - spin_lock_irqsave(&udc->lock, flags); + mv_udc_enable(udc); + udc_stop(udc); + /* stop all usb activities */ udc->gadget.speed = USB_SPEED_UNKNOWN; stop_activity(udc, driver); + mv_udc_disable(udc); + spin_unlock_irqrestore(&udc->lock, flags); /* unbind gadget driver */ @@ -1301,6 +1445,31 @@ static int mv_udc_stop(struct usb_gadget_driver *driver) return 0; } +static void mv_set_ptc(struct mv_udc *udc, u32 mode) +{ + u32 portsc; + + portsc = readl(&udc->op_regs->portsc[0]); + portsc |= mode << 16; + writel(portsc, &udc->op_regs->portsc[0]); +} + +static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req) +{ + struct mv_udc *udc = the_controller; + struct mv_req *req = container_of(_req, struct mv_req, req); + unsigned long flags; + + dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode); + + spin_lock_irqsave(&udc->lock, flags); + if (req->test_mode) { + mv_set_ptc(udc, req->test_mode); + req->test_mode = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); +} + static int udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) { @@ -1310,6 +1479,7 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) ep = &udc->eps[0]; udc->ep0_dir = direction; + udc->ep0_state = WAIT_FOR_OUT_STATUS; req = udc->status_req; @@ -1323,9 +1493,21 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) req->ep = ep; req->req.status = -EINPROGRESS; req->req.actual = 0; - req->req.complete = NULL; + if (udc->test_mode) { + req->req.complete = prime_status_complete; + req->test_mode = udc->test_mode; + udc->test_mode = 0; + } else + req->req.complete = NULL; req->dtd_count = 0; + if (req->req.dma == DMA_ADDR_INVALID) { + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_dir(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + } + /* prime the data phase */ if (!req_to_dtd(req)) retval = queue_dtd(ep, req); @@ -1346,6 +1528,17 @@ out: return retval; } +static void mv_udc_testmode(struct mv_udc *udc, u16 index) +{ + if (index <= TEST_FORCE_EN) { + udc->test_mode = index; + if (udc_prime_status(udc, EP_DIR_IN, 0, true)) + ep0_stall(udc); + } else + dev_err(&udc->dev->dev, + "This test mode(%d) is not supported\n", index); +} + static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup) { udc->dev_addr = (u8)setup->wValue; @@ -1360,7 +1553,7 @@ static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup) static void ch9getstatus(struct mv_udc *udc, u8 ep_num, struct usb_ctrlrequest *setup) { - u16 status; + u16 status = 0; int retval; if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) @@ -1388,6 +1581,8 @@ static void ch9getstatus(struct mv_udc *udc, u8 ep_num, retval = udc_prime_status(udc, EP_DIR_IN, status, false); if (retval) ep0_stall(udc); + else + udc->ep0_state = DATA_STATE_XMIT; } static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) @@ -1402,9 +1597,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) case USB_DEVICE_REMOTE_WAKEUP: udc->remote_wakeup = 0; break; - case USB_DEVICE_TEST_MODE: - mv_udc_testmode(udc, 0, false); - break; default: goto out; } @@ -1433,8 +1625,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) if (udc_prime_status(udc, EP_DIR_IN, 0, true)) ep0_stall(udc); - else - udc->ep0_state = DATA_STATE_XMIT; out: return; } @@ -1452,16 +1642,16 @@ static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) break; case USB_DEVICE_TEST_MODE: if (setup->wIndex & 0xFF - && udc->gadget.speed != USB_SPEED_HIGH) - goto out; - if (udc->usb_state == USB_STATE_CONFIGURED - || udc->usb_state == USB_STATE_ADDRESS - || udc->usb_state == USB_STATE_DEFAULT) - mv_udc_testmode(udc, - setup->wIndex & 0xFF00, true); - else - goto out; - break; + || udc->gadget.speed != USB_SPEED_HIGH) + ep0_stall(udc); + + if (udc->usb_state != USB_STATE_CONFIGURED + && udc->usb_state != USB_STATE_ADDRESS + && udc->usb_state != USB_STATE_DEFAULT) + ep0_stall(udc); + + mv_udc_testmode(udc, (setup->wIndex >> 8)); + goto out; default: goto out; } @@ -1599,8 +1789,7 @@ static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr) dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT]; /* Clear bit in ENDPTSETUPSTAT */ - temp = readl(&udc->op_regs->epsetupstat); - writel(temp | (1 << ep_num), &udc->op_regs->epsetupstat); + writel((1 << ep_num), &udc->op_regs->epsetupstat); /* while a hazard exists when setup package arrives */ do { @@ -1871,23 +2060,57 @@ static irqreturn_t mv_udc_irq(int irq, void *dev) return IRQ_HANDLED; } +static irqreturn_t mv_udc_vbus_irq(int irq, void *dev) +{ + struct mv_udc *udc = (struct mv_udc *)dev; + + /* polling VBUS and init phy may cause too much time*/ + if (udc->qwork) + queue_work(udc->qwork, &udc->vbus_work); + + return IRQ_HANDLED; +} + +static void mv_udc_vbus_work(struct work_struct *work) +{ + struct mv_udc *udc; + unsigned int vbus; + + udc = container_of(work, struct mv_udc, vbus_work); + if (!udc->pdata->vbus) + return; + + vbus = udc->pdata->vbus->poll(); + dev_info(&udc->dev->dev, "vbus is %d\n", vbus); + + if (vbus == VBUS_HIGH) + mv_udc_vbus_session(&udc->gadget, 1); + else if (vbus == VBUS_LOW) + mv_udc_vbus_session(&udc->gadget, 0); +} + /* release device structure */ static void gadget_release(struct device *_dev) { struct mv_udc *udc = the_controller; complete(udc->done); - kfree(udc); } -static int mv_udc_remove(struct platform_device *dev) +static int __devexit mv_udc_remove(struct platform_device *dev) { struct mv_udc *udc = the_controller; - DECLARE_COMPLETION(done); + int clk_i; usb_del_gadget_udc(&udc->gadget); - udc->done = &done; + if (udc->qwork) { + flush_workqueue(udc->qwork); + destroy_workqueue(udc->qwork); + } + + if (udc->pdata && udc->pdata->vbus && udc->clock_gating) + free_irq(udc->pdata->vbus->irq, &dev->dev); /* free memory allocated in probe */ if (udc->dtd_pool) @@ -1902,6 +2125,8 @@ static int mv_udc_remove(struct platform_device *dev) if (udc->irq) free_irq(udc->irq, &dev->dev); + mv_udc_disable(udc); + if (udc->cap_regs) iounmap(udc->cap_regs); udc->cap_regs = NULL; @@ -1915,45 +2140,62 @@ static int mv_udc_remove(struct platform_device *dev) kfree(udc->status_req); } + for (clk_i = 0; clk_i <= udc->clknum; clk_i++) + clk_put(udc->clk[clk_i]); + device_unregister(&udc->gadget.dev); /* free dev, wait for the release() finished */ - wait_for_completion(&done); + wait_for_completion(udc->done); + kfree(udc); the_controller = NULL; return 0; } -int mv_udc_probe(struct platform_device *dev) +static int __devinit mv_udc_probe(struct platform_device *dev) { + struct mv_usb_platform_data *pdata = dev->dev.platform_data; struct mv_udc *udc; int retval = 0; + int clk_i = 0; struct resource *r; size_t size; - udc = kzalloc(sizeof *udc, GFP_KERNEL); + if (pdata == NULL) { + dev_err(&dev->dev, "missing platform_data\n"); + return -ENODEV; + } + + size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum; + udc = kzalloc(size, GFP_KERNEL); if (udc == NULL) { dev_err(&dev->dev, "failed to allocate memory for udc\n"); - retval = -ENOMEM; - goto error; + return -ENOMEM; } + the_controller = udc; + udc->done = &release_done; + udc->pdata = dev->dev.platform_data; spin_lock_init(&udc->lock); udc->dev = dev; - udc->clk = clk_get(&dev->dev, "U2OCLK"); - if (IS_ERR(udc->clk)) { - retval = PTR_ERR(udc->clk); - goto error; + udc->clknum = pdata->clknum; + for (clk_i = 0; clk_i < udc->clknum; clk_i++) { + udc->clk[clk_i] = clk_get(&dev->dev, pdata->clkname[clk_i]); + if (IS_ERR(udc->clk[clk_i])) { + retval = PTR_ERR(udc->clk[clk_i]); + goto err_put_clk; + } } - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2o"); + r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs"); if (r == NULL) { dev_err(&dev->dev, "no I/O memory resource defined\n"); retval = -ENODEV; - goto error; + goto err_put_clk; } udc->cap_regs = (struct mv_cap_regs __iomem *) @@ -1961,29 +2203,31 @@ int mv_udc_probe(struct platform_device *dev) if (udc->cap_regs == NULL) { dev_err(&dev->dev, "failed to map I/O memory\n"); retval = -EBUSY; - goto error; + goto err_put_clk; } - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2ophy"); + r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs"); if (r == NULL) { dev_err(&dev->dev, "no phy I/O memory resource defined\n"); retval = -ENODEV; - goto error; + goto err_iounmap_capreg; } udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r)); if (udc->phy_regs == 0) { dev_err(&dev->dev, "failed to map phy I/O memory\n"); retval = -EBUSY; - goto error; + goto err_iounmap_capreg; } /* we will acces controller register, so enable the clk */ - clk_enable(udc->clk); - retval = mv_udc_phy_init(udc->phy_regs); - if (retval) { - dev_err(&dev->dev, "phy initialization error %d\n", retval); - goto error; + udc_clock_enable(udc); + if (pdata->phy_init) { + retval = pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&dev->dev, "phy init error %d\n", retval); + goto err_iounmap_phyreg; + } } udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs @@ -1991,6 +2235,13 @@ int mv_udc_probe(struct platform_device *dev) & CAPLENGTH_MASK)); udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK; + /* + * some platform will use usb to download image, it may not disconnect + * usb gadget before loading kernel. So first stop udc here. + */ + udc_stop(udc); + writel(0xFFFFFFFF, &udc->op_regs->usbsts); + size = udc->max_eps * sizeof(struct mv_dqh) *2; size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1); udc->ep_dqh = dma_alloc_coherent(&dev->dev, size, @@ -1999,7 +2250,7 @@ int mv_udc_probe(struct platform_device *dev) if (udc->ep_dqh == NULL) { dev_err(&dev->dev, "allocate dQH memory failed\n"); retval = -ENOMEM; - goto error; + goto err_disable_clock; } udc->ep_dqh_size = size; @@ -2012,7 +2263,7 @@ int mv_udc_probe(struct platform_device *dev) if (!udc->dtd_pool) { retval = -ENOMEM; - goto error; + goto err_free_dma; } size = udc->max_eps * sizeof(struct mv_ep) *2; @@ -2020,7 +2271,7 @@ int mv_udc_probe(struct platform_device *dev) if (udc->eps == NULL) { dev_err(&dev->dev, "allocate ep memory failed\n"); retval = -ENOMEM; - goto error; + goto err_destroy_dma; } /* initialize ep0 status request structure */ @@ -2028,13 +2279,13 @@ int mv_udc_probe(struct platform_device *dev) if (!udc->status_req) { dev_err(&dev->dev, "allocate status_req memory failed\n"); retval = -ENOMEM; - goto error; + goto err_free_eps; } INIT_LIST_HEAD(&udc->status_req->queue); /* allocate a small amount of memory to get valid address */ udc->status_req->req.buf = kzalloc(8, GFP_KERNEL); - udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); + udc->status_req->req.dma = DMA_ADDR_INVALID; udc->resume_state = USB_STATE_NOTATTACHED; udc->usb_state = USB_STATE_POWERED; @@ -2045,15 +2296,15 @@ int mv_udc_probe(struct platform_device *dev) if (r == NULL) { dev_err(&dev->dev, "no IRQ resource defined\n"); retval = -ENODEV; - goto error; + goto err_free_status_req; } udc->irq = r->start; if (request_irq(udc->irq, mv_udc_irq, - IRQF_DISABLED | IRQF_SHARED, driver_name, udc)) { + IRQF_SHARED, driver_name, udc)) { dev_err(&dev->dev, "Request irq %d for UDC failed\n", udc->irq); retval = -ENODEV; - goto error; + goto err_free_status_req; } /* initialize gadget structure */ @@ -2072,18 +2323,82 @@ int mv_udc_probe(struct platform_device *dev) retval = device_register(&udc->gadget.dev); if (retval) - goto error; + goto err_free_irq; eps_init(udc); - the_controller = udc; + /* VBUS detect: we can disable/enable clock on demand.*/ + if (pdata->vbus) { + udc->clock_gating = 1; + retval = request_threaded_irq(pdata->vbus->irq, NULL, + mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc); + if (retval) { + dev_info(&dev->dev, + "Can not request irq for VBUS, " + "disable clock gating\n"); + udc->clock_gating = 0; + } + + udc->qwork = create_singlethread_workqueue("mv_udc_queue"); + if (!udc->qwork) { + dev_err(&dev->dev, "cannot create workqueue\n"); + retval = -ENOMEM; + goto err_unregister; + } + + INIT_WORK(&udc->vbus_work, mv_udc_vbus_work); + } + + /* + * When clock gating is supported, we can disable clk and phy. + * If not, it means that VBUS detection is not supported, we + * have to enable vbus active all the time to let controller work. + */ + if (udc->clock_gating) { + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); + } else + udc->vbus_active = 1; retval = usb_add_gadget_udc(&dev->dev, &udc->gadget); - if (!retval) - return retval; -error: - if (udc) - mv_udc_remove(udc->dev); + if (retval) + goto err_unregister; + + dev_info(&dev->dev, "successful probe UDC device %s clock gating.\n", + udc->clock_gating ? "with" : "without"); + + return 0; + +err_unregister: + if (udc->pdata && udc->pdata->vbus && udc->clock_gating) + free_irq(pdata->vbus->irq, &dev->dev); + device_unregister(&udc->gadget.dev); +err_free_irq: + free_irq(udc->irq, &dev->dev); +err_free_status_req: + kfree(udc->status_req->req.buf); + kfree(udc->status_req); +err_free_eps: + kfree(udc->eps); +err_destroy_dma: + dma_pool_destroy(udc->dtd_pool); +err_free_dma: + dma_free_coherent(&dev->dev, udc->ep_dqh_size, + udc->ep_dqh, udc->ep_dqh_dma); +err_disable_clock: + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); +err_iounmap_phyreg: + iounmap((void *)udc->phy_regs); +err_iounmap_capreg: + iounmap(udc->cap_regs); +err_put_clk: + for (clk_i--; clk_i >= 0; clk_i--) + clk_put(udc->clk[clk_i]); + the_controller = NULL; + kfree(udc); return retval; } @@ -2102,11 +2417,16 @@ static int mv_udc_resume(struct device *_dev) struct mv_udc *udc = the_controller; int retval; - retval = mv_udc_phy_init(udc->phy_regs); - if (retval) { - dev_err(_dev, "phy initialization error %d\n", retval); - return retval; + if (udc->pdata->phy_init) { + retval = udc->pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&udc->dev->dev, + "init phy error %d when resume back\n", + retval); + return retval; + } } + udc_reset(udc); ep0_reset(udc); udc_start(udc); @@ -2120,9 +2440,21 @@ static const struct dev_pm_ops mv_udc_pm_ops = { }; #endif +static void mv_udc_shutdown(struct platform_device *dev) +{ + struct mv_udc *udc = the_controller; + u32 mode; + + /* reset controller mode to IDLE */ + mode = readl(&udc->op_regs->usbmode); + mode &= ~3; + writel(mode, &udc->op_regs->usbmode); +} + static struct platform_driver udc_driver = { .probe = mv_udc_probe, .remove = __exit_p(mv_udc_remove), + .shutdown = mv_udc_shutdown, .driver = { .owner = THIS_MODULE, .name = "pxa-u2o", |