diff options
Diffstat (limited to 'drivers/usb/dwc3/core.h')
| -rw-r--r-- | drivers/usb/dwc3/core.h | 53 |
1 files changed, 47 insertions, 6 deletions
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 6b60e42626a2..de5a8570be04 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -26,6 +26,7 @@ #include <linux/dma-mapping.h> #include <linux/mm.h> #include <linux/debugfs.h> +#include <linux/wait.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -37,6 +38,7 @@ #define DWC3_MSG_MAX 500 /* Global constants */ +#define DWC3_PULL_UP_TIMEOUT 500 /* ms */ #define DWC3_ZLP_BUF_SIZE 1024 /* size of a superspeed bulk */ #define DWC3_EP0_BOUNCE_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 @@ -65,6 +67,7 @@ #define DWC3_DEVICE_EVENT_OVERFLOW 11 #define DWC3_GEVNTCOUNT_MASK 0xfffc +#define DWC3_GEVNTCOUNT_EHB (1 << 31) #define DWC3_GSNPSID_MASK 0xffff0000 #define DWC3_GSNPSREV_MASK 0xffff @@ -147,6 +150,8 @@ #define DWC3_DEPCMDPAR0 0x08 #define DWC3_DEPCMD 0x0c +#define DWC3_DEV_IMOD(n) (0xca00 + (n * 0x4)) + /* OTG Registers */ #define DWC3_OCFG 0xcc00 #define DWC3_OCTL 0xcc04 @@ -198,6 +203,9 @@ #define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1) #define DWC3_GCTL_DSBLCLKGTNG (1 << 0) +/* Global User Control 1 Register */ +#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW (1 << 24) + /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) #define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30) @@ -450,6 +458,8 @@ #define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0) #define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0) +#define DWC3_DEPCMD_CMD(x) ((x) & 0xf) + /* The EP number goes 0..31 so ep0 is always out and ep1 is always in */ #define DWC3_DALEPENA_EP(n) (1 << n) @@ -458,6 +468,11 @@ #define DWC3_DEPCMD_TYPE_BULK 2 #define DWC3_DEPCMD_TYPE_INTR 3 +#define DWC3_DEV_IMOD_COUNT_SHIFT 16 +#define DWC3_DEV_IMOD_COUNT_MASK (0xffff << 16) +#define DWC3_DEV_IMOD_INTERVAL_SHIFT 0 +#define DWC3_DEV_IMOD_INTERVAL_MASK (0xffff << 0) + /* Structures */ struct dwc3_trb; @@ -465,6 +480,7 @@ struct dwc3_trb; /** * struct dwc3_event_buffer - Software event buffer representation * @buf: _THE_ buffer + * @cache: The buffer cache used in the threaded interrupt * @length: size of this buffer * @lpos: event offset * @count: cache of last read event count register @@ -474,6 +490,7 @@ struct dwc3_trb; */ struct dwc3_event_buffer { void *buf; + void *cache; unsigned length; unsigned int lpos; unsigned int count; @@ -499,6 +516,7 @@ struct dwc3_event_buffer { * @endpoint: usb endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint + * @wait_end_transfer: wait_queue_head_t for waiting on End Transfer complete * @lock: spinlock for endpoint request queue traversal * @regs: pointer to first endpoint register * @trb_pool: array of transaction buffers @@ -524,12 +542,13 @@ struct dwc3_ep { struct list_head pending_list; struct list_head started_list; + wait_queue_head_t wait_end_transfer; + spinlock_t lock; void __iomem *regs; struct dwc3_trb *trb_pool; dma_addr_t trb_pool_dma; - const struct usb_ss_ep_comp_descriptor *comp_desc; struct dwc3 *dwc; u32 saved_state; @@ -540,6 +559,8 @@ struct dwc3_ep { #define DWC3_EP_BUSY (1 << 4) #define DWC3_EP_PENDING_REQUEST (1 << 5) #define DWC3_EP_MISSED_ISOC (1 << 6) +#define DWC3_EP_END_TRANSFER_PENDING (1 << 7) +#define DWC3_EP_TRANSFER_STARTED (1 << 8) /* This last one is specific to EP0 */ #define DWC3_EP0_DIR_IN (1 << 31) @@ -703,7 +724,7 @@ struct dwc3_hwparams { * @dep: struct dwc3_ep owning this request * @sg: pointer to first incomplete sg * @num_pending_sgs: counter to pending sgs - * @first_trb_index: index to first trb used by this request + * @remaining: amount of data remaining * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb * @trb_dma: DMA address of @trb @@ -718,7 +739,7 @@ struct dwc3_request { struct scatterlist *sg; unsigned num_pending_sgs; - u8 first_trb_index; + unsigned remaining; u8 epnum; struct dwc3_trb *trb; dma_addr_t trb_dma; @@ -748,6 +769,7 @@ struct dwc3_scratchpad_array { * @ep0_usb_req: dummy req used while handling STD USB requests * @ep0_bounce_addr: dma address of ep0_bounce * @scratch_addr: dma address of scratchbuf + * @ep0_in_setup: one control transfer is completed and enter setup phase * @lock: for synchronizing * @dev: pointer to our struct device * @xhci: pointer to our xHCI child @@ -784,7 +806,6 @@ struct dwc3_scratchpad_array { * @ep0state: state of endpoint zero * @link_state: link state * @speed: device speed (super, high, full, low) - * @mem: points to start of memory which is used for this struct. * @hwparams: copy of hwparams registers * @root: debugfs root folder pointer * @regset: debugfs pointer to regdump file @@ -798,6 +819,7 @@ struct dwc3_scratchpad_array { * @ep0_bounced: true when we used bounce buffer * @ep0_expect_in: true when we expect a DATA IN transfer * @has_hibernation: true when dwc3 was configured with Hibernation + * @sysdev_is_parent: true when dwc3 device has a parent driver * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that * there's now way for software to detect this in runtime. * @is_utmi_l1_suspend: the core asserts output signal @@ -833,6 +855,8 @@ struct dwc3_scratchpad_array { * 1 - -3.5dB de-emphasis * 2 - No de-emphasis * 3 - Reserved + * @imod_interval: set the interrupt moderation interval in 250ns + * increments or 0 to disable. */ struct dwc3 { struct usb_ctrlrequest *ctrl_req; @@ -846,11 +870,13 @@ struct dwc3 { dma_addr_t ep0_bounce_addr; dma_addr_t scratch_addr; struct dwc3_request ep0_usb_req; + struct completion ep0_in_setup; /* device lock */ spinlock_t lock; struct device *dev; + struct device *sysdev; struct platform_device *xhci; struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM]; @@ -909,6 +935,7 @@ struct dwc3 { #define DWC3_REVISION_260A 0x5533260a #define DWC3_REVISION_270A 0x5533270a #define DWC3_REVISION_280A 0x5533280a +#define DWC3_REVISION_290A 0x5533290a #define DWC3_REVISION_300A 0x5533300a #define DWC3_REVISION_310A 0x5533310a @@ -918,6 +945,7 @@ struct dwc3 { */ #define DWC3_REVISION_IS_DWC31 0x80000000 #define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_DWC31) +#define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31) enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; @@ -934,8 +962,6 @@ struct dwc3 { u8 num_out_eps; u8 num_in_eps; - void *mem; - struct dwc3_hwparams hwparams; struct dentry *root; struct debugfs_regset32 *regset; @@ -952,6 +978,7 @@ struct dwc3 { unsigned ep0_bounced:1; unsigned ep0_expect_in:1; unsigned has_hibernation:1; + unsigned sysdev_is_parent:1; unsigned has_lpm_erratum:1; unsigned is_utmi_l1_suspend:1; unsigned is_fpga:1; @@ -978,6 +1005,8 @@ struct dwc3 { unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; + + u16 imod_interval; }; /* -------------------------------------------------------------------------- */ @@ -1039,12 +1068,16 @@ struct dwc3_event_depevt { /* Control-only Status */ #define DEPEVT_STATUS_CONTROL_DATA 1 #define DEPEVT_STATUS_CONTROL_STATUS 2 +#define DEPEVT_STATUS_CONTROL_PHASE(n) ((n) & 3) /* In response to Start Transfer */ #define DEPEVT_TRANSFER_NO_RESOURCE 1 #define DEPEVT_TRANSFER_BUS_EXPIRY 2 u32 parameters:16; + +/* For Command Complete Events */ +#define DEPEVT_PARAMETER_CMD(n) (((n) & (0xf << 8)) >> 8) } __packed; /** @@ -1133,12 +1166,20 @@ struct dwc3_gadget_ep_cmd_params { void dwc3_set_mode(struct dwc3 *dwc, u32 mode); u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type); +/* check whether we are on the DWC_usb3 core */ +static inline bool dwc3_is_usb3(struct dwc3 *dwc) +{ + return !(dwc->revision & DWC3_REVISION_IS_DWC31); +} + /* check whether we are on the DWC_usb31 core */ static inline bool dwc3_is_usb31(struct dwc3 *dwc) { return !!(dwc->revision & DWC3_REVISION_IS_DWC31); } +bool dwc3_has_imod(struct dwc3 *dwc); + #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_host_init(struct dwc3 *dwc); void dwc3_host_exit(struct dwc3 *dwc); |