summaryrefslogtreecommitdiffstats
path: root/drivers/usb/core/message.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core/message.c')
-rw-r--r--drivers/usb/core/message.c182
1 files changed, 106 insertions, 76 deletions
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 08fb20f06f3e..8569600f3130 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -158,6 +158,37 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u
/**
+ * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion
+ * @usb_dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @data: pointer to the data to send
+ * @len: length in bytes of the data to send
+ * @actual_length: pointer to a location to put the actual length transferred in bytes
+ * @timeout: time in msecs to wait for the message to complete before
+ * timing out (if 0 the wait is forever)
+ * Context: !in_interrupt ()
+ *
+ * This function sends a simple interrupt message to a specified endpoint and
+ * waits for the message to complete, or timeout.
+ *
+ * If successful, it returns 0, otherwise a negative error number. The number
+ * of actual bytes transferred will be stored in the actual_length paramater.
+ *
+ * Don't use this function from within an interrupt context, like a bottom half
+ * handler. If you need an asynchronous message, or need to send a message
+ * from within interrupt context, use usb_submit_urb() If a thread in your
+ * driver uses this call, make sure your disconnect() method can wait for it to
+ * complete. Since you don't have a handle on the URB used, you can't cancel
+ * the request.
+ */
+int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
+ void *data, int len, int *actual_length, int timeout)
+{
+ return usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout);
+}
+EXPORT_SYMBOL_GPL(usb_interrupt_msg);
+
+/**
* usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion
* @usb_dev: pointer to the usb device to send the message to
* @pipe: endpoint "pipe" to send the message to
@@ -1380,15 +1411,7 @@ free_interfaces:
return ret;
}
}
- }
-
- /* if it's already configured, clear out old state first.
- * getting rid of old interfaces means unbinding their drivers.
- */
- if (dev->state != USB_STATE_ADDRESS)
- usb_disable_device (dev, 1); // Skip ep0
- if (cp) {
i = dev->bus_mA - cp->desc.bMaxPower * 2;
if (i < 0)
dev_warn(&dev->dev, "new config #%d exceeds power "
@@ -1396,84 +1419,91 @@ free_interfaces:
configuration, -i);
}
+ /* if it's already configured, clear out old state first.
+ * getting rid of old interfaces means unbinding their drivers.
+ */
+ if (dev->state != USB_STATE_ADDRESS)
+ usb_disable_device (dev, 1); // Skip ep0
+
if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0)
- goto free_interfaces;
+ NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) {
+
+ /* All the old state is gone, so what else can we do?
+ * The device is probably useless now anyway.
+ */
+ cp = NULL;
+ }
dev->actconfig = cp;
- if (!cp)
+ if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
- else {
- usb_set_device_state(dev, USB_STATE_CONFIGURED);
+ goto free_interfaces;
+ }
+ usb_set_device_state(dev, USB_STATE_CONFIGURED);
- /* Initialize the new interface structures and the
- * hc/hcd/usbcore interface/endpoint state.
- */
- for (i = 0; i < nintf; ++i) {
- struct usb_interface_cache *intfc;
- struct usb_interface *intf;
- struct usb_host_interface *alt;
-
- cp->interface[i] = intf = new_interfaces[i];
- intfc = cp->intf_cache[i];
- intf->altsetting = intfc->altsetting;
- intf->num_altsetting = intfc->num_altsetting;
- kref_get(&intfc->ref);
-
- alt = usb_altnum_to_altsetting(intf, 0);
-
- /* No altsetting 0? We'll assume the first altsetting.
- * We could use a GetInterface call, but if a device is
- * so non-compliant that it doesn't have altsetting 0
- * then I wouldn't trust its reply anyway.
- */
- if (!alt)
- alt = &intf->altsetting[0];
-
- intf->cur_altsetting = alt;
- usb_enable_interface(dev, intf);
- intf->dev.parent = &dev->dev;
- intf->dev.driver = NULL;
- intf->dev.bus = &usb_bus_type;
- intf->dev.dma_mask = dev->dev.dma_mask;
- intf->dev.release = release_interface;
- device_initialize (&intf->dev);
- mark_quiesced(intf);
- sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
- dev->bus->busnum, dev->devpath,
- configuration,
- alt->desc.bInterfaceNumber);
- }
- kfree(new_interfaces);
+ /* Initialize the new interface structures and the
+ * hc/hcd/usbcore interface/endpoint state.
+ */
+ for (i = 0; i < nintf; ++i) {
+ struct usb_interface_cache *intfc;
+ struct usb_interface *intf;
+ struct usb_host_interface *alt;
+
+ cp->interface[i] = intf = new_interfaces[i];
+ intfc = cp->intf_cache[i];
+ intf->altsetting = intfc->altsetting;
+ intf->num_altsetting = intfc->num_altsetting;
+ kref_get(&intfc->ref);
- if (cp->string == NULL)
- cp->string = usb_cache_string(dev,
- cp->desc.iConfiguration);
+ alt = usb_altnum_to_altsetting(intf, 0);
- /* Now that all the interfaces are set up, register them
- * to trigger binding of drivers to interfaces. probe()
- * routines may install different altsettings and may
- * claim() any interfaces not yet bound. Many class drivers
- * need that: CDC, audio, video, etc.
+ /* No altsetting 0? We'll assume the first altsetting.
+ * We could use a GetInterface call, but if a device is
+ * so non-compliant that it doesn't have altsetting 0
+ * then I wouldn't trust its reply anyway.
*/
- for (i = 0; i < nintf; ++i) {
- struct usb_interface *intf = cp->interface[i];
-
- dev_dbg (&dev->dev,
- "adding %s (config #%d, interface %d)\n",
- intf->dev.bus_id, configuration,
- intf->cur_altsetting->desc.bInterfaceNumber);
- ret = device_add (&intf->dev);
- if (ret != 0) {
- dev_err(&dev->dev,
- "device_add(%s) --> %d\n",
- intf->dev.bus_id,
- ret);
- continue;
- }
- usb_create_sysfs_intf_files (intf);
+ if (!alt)
+ alt = &intf->altsetting[0];
+
+ intf->cur_altsetting = alt;
+ usb_enable_interface(dev, intf);
+ intf->dev.parent = &dev->dev;
+ intf->dev.driver = NULL;
+ intf->dev.bus = &usb_bus_type;
+ intf->dev.dma_mask = dev->dev.dma_mask;
+ intf->dev.release = release_interface;
+ device_initialize (&intf->dev);
+ mark_quiesced(intf);
+ sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
+ dev->bus->busnum, dev->devpath,
+ configuration, alt->desc.bInterfaceNumber);
+ }
+ kfree(new_interfaces);
+
+ if (cp->string == NULL)
+ cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
+
+ /* Now that all the interfaces are set up, register them
+ * to trigger binding of drivers to interfaces. probe()
+ * routines may install different altsettings and may
+ * claim() any interfaces not yet bound. Many class drivers
+ * need that: CDC, audio, video, etc.
+ */
+ for (i = 0; i < nintf; ++i) {
+ struct usb_interface *intf = cp->interface[i];
+
+ dev_dbg (&dev->dev,
+ "adding %s (config #%d, interface %d)\n",
+ intf->dev.bus_id, configuration,
+ intf->cur_altsetting->desc.bInterfaceNumber);
+ ret = device_add (&intf->dev);
+ if (ret != 0) {
+ dev_err(&dev->dev, "device_add(%s) --> %d\n",
+ intf->dev.bus_id, ret);
+ continue;
}
+ usb_create_sysfs_intf_files (intf);
}
return 0;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 21:12:58 +0000