diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 136 |
1 files changed, 88 insertions, 48 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 34be27a6cbb4..65d9ea1e6d71 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1220,54 +1220,14 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) #endif /** - * usb_new_device - perform initial device setup (usbcore-internal) + * usb_configure_device_otg - FIXME (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * This is called with devices which have been enumerated, but not yet - * configured. The device descriptor is available, but not descriptors - * for any device configuration. The caller must have locked either - * the parent hub (if udev is a normal device) or else the - * usb_bus_list_lock (if udev is a root hub). The parent's pointer to - * udev has already been installed, but udev is not yet visible through - * sysfs or other filesystem code. - * - * It will return if the device is configured properly or not. Zero if - * the interface was registered with the driver core; else a negative - * errno value. - * - * This call is synchronous, and may not be used in an interrupt context. - * - * Only the hub driver or root-hub registrar should ever call this. + * Do configuration for On-The-Go devices */ -int usb_new_device(struct usb_device *udev) +static int usb_configure_device_otg(struct usb_device *udev) { - int err; - - /* Determine quirks */ - usb_detect_quirks(udev); - - err = usb_get_configuration(udev); - if (err < 0) { - dev_err(&udev->dev, "can't read configurations, error %d\n", - err); - goto fail; - } - - /* read the standard strings and cache them if present */ - udev->product = usb_cache_string(udev, udev->descriptor.iProduct); - udev->manufacturer = usb_cache_string(udev, - udev->descriptor.iManufacturer); - udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); - - /* Tell the world! */ - dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, " - "SerialNumber=%d\n", - udev->descriptor.iManufacturer, - udev->descriptor.iProduct, - udev->descriptor.iSerialNumber); - show_string(udev, "Product", udev->product); - show_string(udev, "Manufacturer", udev->manufacturer); - show_string(udev, "SerialNumber", udev->serial); + int err = 0; #ifdef CONFIG_USB_OTG /* @@ -1329,8 +1289,82 @@ int usb_new_device(struct usb_device *udev) err = -ENOTSUPP; goto fail; } +fail: #endif + return err; +} + +/** + * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * This is only called by usb_new_device() and usb_authorize_device() + * and FIXME -- all comments that apply to them apply here wrt to + * environment. + * + * If the device is WUSB and not authorized, we don't attempt to read + * the string descriptors, as they will be errored out by the device + * until it has been authorized. + */ +static int usb_configure_device(struct usb_device *udev) +{ + int err; + + if (udev->config == NULL) { + err = usb_get_configuration(udev); + if (err < 0) { + dev_err(&udev->dev, "can't read configurations, error %d\n", + err); + goto fail; + } + } + if (udev->wusb == 1 && udev->authorized == 0) { + udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL); + udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL); + udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL); + } + else { + /* read the standard strings and cache them if present */ + udev->product = usb_cache_string(udev, udev->descriptor.iProduct); + udev->manufacturer = usb_cache_string(udev, + udev->descriptor.iManufacturer); + udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); + } + err = usb_configure_device_otg(udev); +fail: + return err; +} + + +/** + * usb_new_device - perform initial device setup (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * This is called with devices which have been enumerated, but not yet + * configured. The device descriptor is available, but not descriptors + * for any device configuration. The caller must have locked either + * the parent hub (if udev is a normal device) or else the + * usb_bus_list_lock (if udev is a root hub). The parent's pointer to + * udev has already been installed, but udev is not yet visible through + * sysfs or other filesystem code. + * + * It will return if the device is configured properly or not. Zero if + * the interface was registered with the driver core; else a negative + * errno value. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Only the hub driver or root-hub registrar should ever call this. + */ +int usb_new_device(struct usb_device *udev) +{ + int err; + + usb_detect_quirks(udev); /* Determine quirks */ + err = usb_configure_device(udev); /* detect & probe dev/intfs */ + if (err < 0) + goto fail; /* export the usbdev device-node for libusb */ udev->dev.devt = MKDEV(USB_DEVICE_MAJOR, (((udev->bus->busnum-1) * 128) + (udev->devnum-1))); @@ -1346,17 +1380,23 @@ int usb_new_device(struct usb_device *udev) err = device_add(&udev->dev); if (err) { dev_err(&udev->dev, "can't device_add, error %d\n", err); - if (udev->parent) - usb_autosuspend_device(udev->parent); goto fail; } -exit: + /* Tell the world! */ + dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, " + "SerialNumber=%d\n", + udev->descriptor.iManufacturer, + udev->descriptor.iProduct, + udev->descriptor.iSerialNumber); + show_string(udev, "Product", udev->product); + show_string(udev, "Manufacturer", udev->manufacturer); + show_string(udev, "SerialNumber", udev->serial); return err; fail: usb_set_device_state(udev, USB_STATE_NOTATTACHED); - goto exit; + return err; } static int hub_port_status(struct usb_hub *hub, int port1, |