diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 20 |
2 files changed, 9 insertions, 27 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5c8850f7a2a0..07812a7ea2a4 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -114,32 +114,32 @@ config SERIAL_SB1250_DUART_CONSOLE If unsure, say Y. config SERIAL_ATMEL - bool "AT91 / AT32 on-chip serial port support" + bool "AT91 on-chip serial port support" depends on HAS_DMA - depends on ARCH_AT91 || AVR32 || COMPILE_TEST + depends on ARCH_AT91 || COMPILE_TEST select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB help This enables the driver for the on-chip UARTs of the Atmel - AT91 and AT32 processors. + AT91 processors. config SERIAL_ATMEL_CONSOLE - bool "Support for console on AT91 / AT32 serial port" + bool "Support for console on AT91 serial port" depends on SERIAL_ATMEL=y select SERIAL_CORE_CONSOLE help Say Y here if you wish to use an on-chip UART on a Atmel - AT91 or AT32 processor as the system console (the system + AT91 processor as the system console (the system console is the device which receives all kernel messages and warnings and which allows logins in single user mode). config SERIAL_ATMEL_PDC - bool "Support DMA transfers on AT91 / AT32 serial port" + bool "Support DMA transfers on AT91 serial port" depends on SERIAL_ATMEL default y help Say Y here if you wish to use the PDC to do DMA transfers to - and from the Atmel AT91 / AT32 serial port. In order to + and from the Atmel AT91 serial port. In order to actually use DMA transfers, make sure that the use_dma_tx and use_dma_rx members in the atmel_uart_data struct is set appropriately for each port. @@ -152,7 +152,7 @@ config SERIAL_ATMEL_TTYAT bool "Install as device ttyATn instead of ttySn" depends on SERIAL_ATMEL=y help - Say Y here if you wish to have the internal AT91 / AT32 UARTs + Say Y here if you wish to have the internal AT91 UARTs appear as /dev/ttyATn (major 204, minor starting at 154) instead of the normal /dev/ttySn (major 4, minor starting at 64). This is necessary if you also want other UARTs, such as diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index d25f044158ff..a7909a5b60d8 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1,5 +1,5 @@ /* - * Driver for Atmel AT91 / AT32 Serial ports + * Driver for Atmel AT91 Serial ports * Copyright (C) 2003 Rick Bronson * * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. @@ -119,7 +119,6 @@ struct atmel_uart_char { /* * at91: 6 USARTs and one DBGU port (SAM9260) - * avr32: 4 * samx7: 3 USARTs and 5 UARTs */ #define ATMEL_MAX_UART 8 @@ -229,21 +228,6 @@ static inline void atmel_uart_writel(struct uart_port *port, u32 reg, u32 value) __raw_writel(value, port->membase + reg); } -#ifdef CONFIG_AVR32 - -/* AVR32 cannot handle 8 or 16bit I/O accesses but only 32bit I/O accesses */ -static inline u8 atmel_uart_read_char(struct uart_port *port) -{ - return __raw_readl(port->membase + ATMEL_US_RHR); -} - -static inline void atmel_uart_write_char(struct uart_port *port, u8 value) -{ - __raw_writel(value, port->membase + ATMEL_US_THR); -} - -#else - static inline u8 atmel_uart_read_char(struct uart_port *port) { return __raw_readb(port->membase + ATMEL_US_RHR); @@ -254,8 +238,6 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value) __raw_writeb(value, port->membase + ATMEL_US_THR); } -#endif - #ifdef CONFIG_SERIAL_ATMEL_PDC static bool atmel_use_pdc_rx(struct uart_port *port) { |