diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/8250/8250_mtk.c | 49 |
1 files changed, 20 insertions, 29 deletions
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 417c7c810df9..f470dedceba9 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -47,7 +47,6 @@ #define MTK_UART_DMA_EN_RX 0x5 #define MTK_UART_ESCAPE_CHAR 0x77 /* Escape char added under sw fc */ -#define MTK_UART_TX_SIZE UART_XMIT_SIZE #define MTK_UART_RX_SIZE 0x8000 #define MTK_UART_TX_TRIGGER 1 #define MTK_UART_RX_TRIGGER MTK_UART_RX_SIZE @@ -89,28 +88,30 @@ static void mtk8250_dma_rx_complete(void *param) struct mtk8250_data *data = up->port.private_data; struct tty_port *tty_port = &up->port.state->port; struct dma_tx_state state; + int copied, total, cnt; unsigned char *ptr; - int copied; - dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr, - dma->rx_size, DMA_FROM_DEVICE); + if (data->rx_status == DMA_RX_SHUTDOWN) + return; dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + total = dma->rx_size - state.residue; + cnt = total; - if (data->rx_status == DMA_RX_SHUTDOWN) - return; + if ((data->rx_pos + cnt) > dma->rx_size) + cnt = dma->rx_size - data->rx_pos; - if ((data->rx_pos + state.residue) <= dma->rx_size) { - ptr = (unsigned char *)(data->rx_pos + dma->rx_buf); - copied = tty_insert_flip_string(tty_port, ptr, state.residue); - } else { - ptr = (unsigned char *)(data->rx_pos + dma->rx_buf); - copied = tty_insert_flip_string(tty_port, ptr, - dma->rx_size - data->rx_pos); + ptr = (unsigned char *)(data->rx_pos + dma->rx_buf); + copied = tty_insert_flip_string(tty_port, ptr, cnt); + data->rx_pos += cnt; + + if (total > cnt) { ptr = (unsigned char *)(dma->rx_buf); - copied += tty_insert_flip_string(tty_port, ptr, - data->rx_pos + state.residue - dma->rx_size); + cnt = total - cnt; + copied += tty_insert_flip_string(tty_port, ptr, cnt); + data->rx_pos = cnt; } + up->port.icount.rx += copied; tty_flip_buffer_push(tty_port); @@ -121,9 +122,7 @@ static void mtk8250_dma_rx_complete(void *param) static void mtk8250_rx_dma(struct uart_8250_port *up) { struct uart_8250_dma *dma = up->dma; - struct mtk8250_data *data = up->port.private_data; struct dma_async_tx_descriptor *desc; - struct dma_tx_state state; desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM, @@ -138,12 +137,6 @@ static void mtk8250_rx_dma(struct uart_8250_port *up) dma->rx_cookie = dmaengine_submit(desc); - dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); - data->rx_pos = state.residue; - - dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr, - dma->rx_size, DMA_FROM_DEVICE); - dma_async_issue_pending(dma->rxchan); } @@ -156,13 +149,11 @@ static void mtk8250_dma_enable(struct uart_8250_port *up) if (data->rx_status != DMA_RX_START) return; - dma->rxconf.direction = DMA_DEV_TO_MEM; - dma->rxconf.src_addr_width = dma->rx_size / 1024; - dma->rxconf.src_addr = dma->rx_addr; + dma->rxconf.src_port_window_size = dma->rx_size; + dma->rxconf.src_addr = dma->rx_addr; - dma->txconf.direction = DMA_MEM_TO_DEV; - dma->txconf.dst_addr_width = MTK_UART_TX_SIZE / 1024; - dma->txconf.dst_addr = dma->tx_addr; + dma->txconf.dst_port_window_size = UART_XMIT_SIZE; + dma->txconf.dst_addr = dma->tx_addr; serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); |