diff options
Diffstat (limited to 'drivers/staging/media/soc_camera/soc_ov9740.c')
| -rw-r--r-- | drivers/staging/media/soc_camera/soc_ov9740.c | 992 |
1 files changed, 0 insertions, 992 deletions
diff --git a/drivers/staging/media/soc_camera/soc_ov9740.c b/drivers/staging/media/soc_camera/soc_ov9740.c deleted file mode 100644 index 7c765595d85f..000000000000 --- a/drivers/staging/media/soc_camera/soc_ov9740.c +++ /dev/null @@ -1,992 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * OmniVision OV9740 Camera Driver - * - * Copyright (C) 2011 NVIDIA Corporation - * - * Based on ov9640 camera driver. - */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/v4l2-mediabus.h> - -#include <media/soc_camera.h> -#include <media/v4l2-clk.h> -#include <media/v4l2-ctrls.h> - -#define to_ov9740(sd) container_of(sd, struct ov9740_priv, subdev) - -/* General Status Registers */ -#define OV9740_MODEL_ID_HI 0x0000 -#define OV9740_MODEL_ID_LO 0x0001 -#define OV9740_REVISION_NUMBER 0x0002 -#define OV9740_MANUFACTURER_ID 0x0003 -#define OV9740_SMIA_VERSION 0x0004 - -/* General Setup Registers */ -#define OV9740_MODE_SELECT 0x0100 -#define OV9740_IMAGE_ORT 0x0101 -#define OV9740_SOFTWARE_RESET 0x0103 -#define OV9740_GRP_PARAM_HOLD 0x0104 -#define OV9740_MSK_CORRUP_FM 0x0105 - -/* Timing Setting */ -#define OV9740_FRM_LENGTH_LN_HI 0x0340 /* VTS */ -#define OV9740_FRM_LENGTH_LN_LO 0x0341 /* VTS */ -#define OV9740_LN_LENGTH_PCK_HI 0x0342 /* HTS */ -#define OV9740_LN_LENGTH_PCK_LO 0x0343 /* HTS */ -#define OV9740_X_ADDR_START_HI 0x0344 -#define OV9740_X_ADDR_START_LO 0x0345 -#define OV9740_Y_ADDR_START_HI 0x0346 -#define OV9740_Y_ADDR_START_LO 0x0347 -#define OV9740_X_ADDR_END_HI 0x0348 -#define OV9740_X_ADDR_END_LO 0x0349 -#define OV9740_Y_ADDR_END_HI 0x034a -#define OV9740_Y_ADDR_END_LO 0x034b -#define OV9740_X_OUTPUT_SIZE_HI 0x034c -#define OV9740_X_OUTPUT_SIZE_LO 0x034d -#define OV9740_Y_OUTPUT_SIZE_HI 0x034e -#define OV9740_Y_OUTPUT_SIZE_LO 0x034f - -/* IO Control Registers */ -#define OV9740_IO_CREL00 0x3002 -#define OV9740_IO_CREL01 0x3004 -#define OV9740_IO_CREL02 0x3005 -#define OV9740_IO_OUTPUT_SEL01 0x3026 -#define OV9740_IO_OUTPUT_SEL02 0x3027 - -/* AWB Registers */ -#define OV9740_AWB_MANUAL_CTRL 0x3406 - -/* Analog Control Registers */ -#define OV9740_ANALOG_CTRL01 0x3601 -#define OV9740_ANALOG_CTRL02 0x3602 -#define OV9740_ANALOG_CTRL03 0x3603 -#define OV9740_ANALOG_CTRL04 0x3604 -#define OV9740_ANALOG_CTRL10 0x3610 -#define OV9740_ANALOG_CTRL12 0x3612 -#define OV9740_ANALOG_CTRL15 0x3615 -#define OV9740_ANALOG_CTRL20 0x3620 -#define OV9740_ANALOG_CTRL21 0x3621 -#define OV9740_ANALOG_CTRL22 0x3622 -#define OV9740_ANALOG_CTRL30 0x3630 -#define OV9740_ANALOG_CTRL31 0x3631 -#define OV9740_ANALOG_CTRL32 0x3632 -#define OV9740_ANALOG_CTRL33 0x3633 - -/* Sensor Control */ -#define OV9740_SENSOR_CTRL03 0x3703 -#define OV9740_SENSOR_CTRL04 0x3704 -#define OV9740_SENSOR_CTRL05 0x3705 -#define OV9740_SENSOR_CTRL07 0x3707 - -/* Timing Control */ -#define OV9740_TIMING_CTRL17 0x3817 -#define OV9740_TIMING_CTRL19 0x3819 -#define OV9740_TIMING_CTRL33 0x3833 -#define OV9740_TIMING_CTRL35 0x3835 - -/* Banding Filter */ -#define OV9740_AEC_MAXEXPO_60_H 0x3a02 -#define OV9740_AEC_MAXEXPO_60_L 0x3a03 -#define OV9740_AEC_B50_STEP_HI 0x3a08 -#define OV9740_AEC_B50_STEP_LO 0x3a09 -#define OV9740_AEC_B60_STEP_HI 0x3a0a -#define OV9740_AEC_B60_STEP_LO 0x3a0b -#define OV9740_AEC_CTRL0D 0x3a0d -#define OV9740_AEC_CTRL0E 0x3a0e -#define OV9740_AEC_MAXEXPO_50_H 0x3a14 -#define OV9740_AEC_MAXEXPO_50_L 0x3a15 - -/* AEC/AGC Control */ -#define OV9740_AEC_ENABLE 0x3503 -#define OV9740_GAIN_CEILING_01 0x3a18 -#define OV9740_GAIN_CEILING_02 0x3a19 -#define OV9740_AEC_HI_THRESHOLD 0x3a11 -#define OV9740_AEC_3A1A 0x3a1a -#define OV9740_AEC_CTRL1B_WPT2 0x3a1b -#define OV9740_AEC_CTRL0F_WPT 0x3a0f -#define OV9740_AEC_CTRL10_BPT 0x3a10 -#define OV9740_AEC_CTRL1E_BPT2 0x3a1e -#define OV9740_AEC_LO_THRESHOLD 0x3a1f - -/* BLC Control */ -#define OV9740_BLC_AUTO_ENABLE 0x4002 -#define OV9740_BLC_MODE 0x4005 - -/* VFIFO */ -#define OV9740_VFIFO_READ_START_HI 0x4608 -#define OV9740_VFIFO_READ_START_LO 0x4609 - -/* DVP Control */ -#define OV9740_DVP_VSYNC_CTRL02 0x4702 -#define OV9740_DVP_VSYNC_MODE 0x4704 -#define OV9740_DVP_VSYNC_CTRL06 0x4706 - -/* PLL Setting */ -#define OV9740_PLL_MODE_CTRL01 0x3104 -#define OV9740_PRE_PLL_CLK_DIV 0x0305 -#define OV9740_PLL_MULTIPLIER 0x0307 -#define OV9740_VT_SYS_CLK_DIV 0x0303 -#define OV9740_VT_PIX_CLK_DIV 0x0301 -#define OV9740_PLL_CTRL3010 0x3010 -#define OV9740_VFIFO_CTRL00 0x460e - -/* ISP Control */ -#define OV9740_ISP_CTRL00 0x5000 -#define OV9740_ISP_CTRL01 0x5001 -#define OV9740_ISP_CTRL03 0x5003 -#define OV9740_ISP_CTRL05 0x5005 -#define OV9740_ISP_CTRL12 0x5012 -#define OV9740_ISP_CTRL19 0x5019 -#define OV9740_ISP_CTRL1A 0x501a -#define OV9740_ISP_CTRL1E 0x501e -#define OV9740_ISP_CTRL1F 0x501f -#define OV9740_ISP_CTRL20 0x5020 -#define OV9740_ISP_CTRL21 0x5021 - -/* AWB */ -#define OV9740_AWB_CTRL00 0x5180 -#define OV9740_AWB_CTRL01 0x5181 -#define OV9740_AWB_CTRL02 0x5182 -#define OV9740_AWB_CTRL03 0x5183 -#define OV9740_AWB_ADV_CTRL01 0x5184 -#define OV9740_AWB_ADV_CTRL02 0x5185 -#define OV9740_AWB_ADV_CTRL03 0x5186 -#define OV9740_AWB_ADV_CTRL04 0x5187 -#define OV9740_AWB_ADV_CTRL05 0x5188 -#define OV9740_AWB_ADV_CTRL06 0x5189 -#define OV9740_AWB_ADV_CTRL07 0x518a -#define OV9740_AWB_ADV_CTRL08 0x518b -#define OV9740_AWB_ADV_CTRL09 0x518c -#define OV9740_AWB_ADV_CTRL10 0x518d -#define OV9740_AWB_ADV_CTRL11 0x518e -#define OV9740_AWB_CTRL0F 0x518f -#define OV9740_AWB_CTRL10 0x5190 -#define OV9740_AWB_CTRL11 0x5191 -#define OV9740_AWB_CTRL12 0x5192 -#define OV9740_AWB_CTRL13 0x5193 -#define OV9740_AWB_CTRL14 0x5194 - -/* MIPI Control */ -#define OV9740_MIPI_CTRL00 0x4800 -#define OV9740_MIPI_3837 0x3837 -#define OV9740_MIPI_CTRL01 0x4801 -#define OV9740_MIPI_CTRL03 0x4803 -#define OV9740_MIPI_CTRL05 0x4805 -#define OV9740_VFIFO_RD_CTRL 0x4601 -#define OV9740_MIPI_CTRL_3012 0x3012 -#define OV9740_SC_CMMM_MIPI_CTR 0x3014 - -#define OV9740_MAX_WIDTH 1280 -#define OV9740_MAX_HEIGHT 720 - -/* Misc. structures */ -struct ov9740_reg { - u16 reg; - u8 val; -}; - -struct ov9740_priv { - struct v4l2_subdev subdev; - struct v4l2_ctrl_handler hdl; - struct v4l2_clk *clk; - - u16 model; - u8 revision; - u8 manid; - u8 smiaver; - - bool flag_vflip; - bool flag_hflip; - - /* For suspend/resume. */ - struct v4l2_mbus_framefmt current_mf; - bool current_enable; -}; - -static const struct ov9740_reg ov9740_defaults[] = { - /* Software Reset */ - { OV9740_SOFTWARE_RESET, 0x01 }, - - /* Banding Filter */ - { OV9740_AEC_B50_STEP_HI, 0x00 }, - { OV9740_AEC_B50_STEP_LO, 0xe8 }, - { OV9740_AEC_CTRL0E, 0x03 }, - { OV9740_AEC_MAXEXPO_50_H, 0x15 }, - { OV9740_AEC_MAXEXPO_50_L, 0xc6 }, - { OV9740_AEC_B60_STEP_HI, 0x00 }, - { OV9740_AEC_B60_STEP_LO, 0xc0 }, - { OV9740_AEC_CTRL0D, 0x04 }, - { OV9740_AEC_MAXEXPO_60_H, 0x18 }, - { OV9740_AEC_MAXEXPO_60_L, 0x20 }, - - /* LC */ - { 0x5842, 0x02 }, { 0x5843, 0x5e }, { 0x5844, 0x04 }, { 0x5845, 0x32 }, - { 0x5846, 0x03 }, { 0x5847, 0x29 }, { 0x5848, 0x02 }, { 0x5849, 0xcc }, - - /* Un-documented OV9740 registers */ - { 0x5800, 0x29 }, { 0x5801, 0x25 }, { 0x5802, 0x20 }, { 0x5803, 0x21 }, - { 0x5804, 0x26 }, { 0x5805, 0x2e }, { 0x5806, 0x11 }, { 0x5807, 0x0c }, - { 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580a, 0x0e }, { 0x580b, 0x16 }, - { 0x580c, 0x06 }, { 0x580d, 0x02 }, { 0x580e, 0x00 }, { 0x580f, 0x00 }, - { 0x5810, 0x04 }, { 0x5811, 0x0a }, { 0x5812, 0x05 }, { 0x5813, 0x02 }, - { 0x5814, 0x00 }, { 0x5815, 0x00 }, { 0x5816, 0x03 }, { 0x5817, 0x09 }, - { 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581a, 0x07 }, { 0x581b, 0x08 }, - { 0x581c, 0x0b }, { 0x581d, 0x14 }, { 0x581e, 0x28 }, { 0x581f, 0x23 }, - { 0x5820, 0x1d }, { 0x5821, 0x1e }, { 0x5822, 0x24 }, { 0x5823, 0x2a }, - { 0x5824, 0x4f }, { 0x5825, 0x6f }, { 0x5826, 0x5f }, { 0x5827, 0x7f }, - { 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582a, 0x8f }, { 0x582b, 0x9e }, - { 0x582c, 0x8f }, { 0x582d, 0x9f }, { 0x582e, 0x4f }, { 0x582f, 0x87 }, - { 0x5830, 0x86 }, { 0x5831, 0x97 }, { 0x5832, 0xae }, { 0x5833, 0x3f }, - { 0x5834, 0x8e }, { 0x5835, 0x7c }, { 0x5836, 0x7e }, { 0x5837, 0xaf }, - { 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583a, 0x9f }, { 0x583b, 0x7f }, - { 0x583c, 0x5f }, - - /* Y Gamma */ - { 0x5480, 0x07 }, { 0x5481, 0x18 }, { 0x5482, 0x2c }, { 0x5483, 0x4e }, - { 0x5484, 0x5e }, { 0x5485, 0x6b }, { 0x5486, 0x77 }, { 0x5487, 0x82 }, - { 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548a, 0xa4 }, { 0x548b, 0xb1 }, - { 0x548c, 0xc6 }, { 0x548d, 0xd8 }, { 0x548e, 0xe9 }, - - /* UV Gamma */ - { 0x5490, 0x0f }, { 0x5491, 0xff }, { 0x5492, 0x0d }, { 0x5493, 0x05 }, - { 0x5494, 0x07 }, { 0x5495, 0x1a }, { 0x5496, 0x04 }, { 0x5497, 0x01 }, - { 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549a, 0x02 }, { 0x549b, 0xeb }, - { 0x549c, 0x02 }, { 0x549d, 0xa0 }, { 0x549e, 0x02 }, { 0x549f, 0x67 }, - { 0x54a0, 0x02 }, { 0x54a1, 0x3b }, { 0x54a2, 0x02 }, { 0x54a3, 0x18 }, - { 0x54a4, 0x01 }, { 0x54a5, 0xe7 }, { 0x54a6, 0x01 }, { 0x54a7, 0xc3 }, - { 0x54a8, 0x01 }, { 0x54a9, 0x94 }, { 0x54aa, 0x01 }, { 0x54ab, 0x72 }, - { 0x54ac, 0x01 }, { 0x54ad, 0x57 }, - - /* AWB */ - { OV9740_AWB_CTRL00, 0xf0 }, - { OV9740_AWB_CTRL01, 0x00 }, - { OV9740_AWB_CTRL02, 0x41 }, - { OV9740_AWB_CTRL03, 0x42 }, - { OV9740_AWB_ADV_CTRL01, 0x8a }, - { OV9740_AWB_ADV_CTRL02, 0x61 }, - { OV9740_AWB_ADV_CTRL03, 0xce }, - { OV9740_AWB_ADV_CTRL04, 0xa8 }, - { OV9740_AWB_ADV_CTRL05, 0x17 }, - { OV9740_AWB_ADV_CTRL06, 0x1f }, - { OV9740_AWB_ADV_CTRL07, 0x27 }, - { OV9740_AWB_ADV_CTRL08, 0x41 }, - { OV9740_AWB_ADV_CTRL09, 0x34 }, - { OV9740_AWB_ADV_CTRL10, 0xf0 }, - { OV9740_AWB_ADV_CTRL11, 0x10 }, - { OV9740_AWB_CTRL0F, 0xff }, - { OV9740_AWB_CTRL10, 0x00 }, - { OV9740_AWB_CTRL11, 0xff }, - { OV9740_AWB_CTRL12, 0x00 }, - { OV9740_AWB_CTRL13, 0xff }, - { OV9740_AWB_CTRL14, 0x00 }, - - /* CIP */ - { 0x530d, 0x12 }, - - /* CMX */ - { 0x5380, 0x01 }, { 0x5381, 0x00 }, { 0x5382, 0x00 }, { 0x5383, 0x17 }, - { 0x5384, 0x00 }, { 0x5385, 0x01 }, { 0x5386, 0x00 }, { 0x5387, 0x00 }, - { 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538a, 0x00 }, { 0x538b, 0x20 }, - { 0x538c, 0x00 }, { 0x538d, 0x00 }, { 0x538e, 0x00 }, { 0x538f, 0x16 }, - { 0x5390, 0x00 }, { 0x5391, 0x9c }, { 0x5392, 0x00 }, { 0x5393, 0xa0 }, - { 0x5394, 0x18 }, - - /* 50/60 Detection */ - { 0x3c0a, 0x9c }, { 0x3c0b, 0x3f }, - - /* Output Select */ - { OV9740_IO_OUTPUT_SEL01, 0x00 }, - { OV9740_IO_OUTPUT_SEL02, 0x00 }, - { OV9740_IO_CREL00, 0x00 }, - { OV9740_IO_CREL01, 0x00 }, - { OV9740_IO_CREL02, 0x00 }, - - /* AWB Control */ - { OV9740_AWB_MANUAL_CTRL, 0x00 }, - - /* Analog Control */ - { OV9740_ANALOG_CTRL03, 0xaa }, - { OV9740_ANALOG_CTRL32, 0x2f }, - { OV9740_ANALOG_CTRL20, 0x66 }, - { OV9740_ANALOG_CTRL21, 0xc0 }, - { OV9740_ANALOG_CTRL31, 0x52 }, - { OV9740_ANALOG_CTRL33, 0x50 }, - { OV9740_ANALOG_CTRL30, 0xca }, - { OV9740_ANALOG_CTRL04, 0x0c }, - { OV9740_ANALOG_CTRL01, 0x40 }, - { OV9740_ANALOG_CTRL02, 0x16 }, - { OV9740_ANALOG_CTRL10, 0xa1 }, - { OV9740_ANALOG_CTRL12, 0x24 }, - { OV9740_ANALOG_CTRL22, 0x9f }, - { OV9740_ANALOG_CTRL15, 0xf0 }, - - /* Sensor Control */ - { OV9740_SENSOR_CTRL03, 0x42 }, - { OV9740_SENSOR_CTRL04, 0x10 }, - { OV9740_SENSOR_CTRL05, 0x45 }, - { OV9740_SENSOR_CTRL07, 0x14 }, - - /* Timing Control */ - { OV9740_TIMING_CTRL33, 0x04 }, - { OV9740_TIMING_CTRL35, 0x02 }, - { OV9740_TIMING_CTRL19, 0x6e }, - { OV9740_TIMING_CTRL17, 0x94 }, - - /* AEC/AGC Control */ - { OV9740_AEC_ENABLE, 0x10 }, - { OV9740_GAIN_CEILING_01, 0x00 }, - { OV9740_GAIN_CEILING_02, 0x7f }, - { OV9740_AEC_HI_THRESHOLD, 0xa0 }, - { OV9740_AEC_3A1A, 0x05 }, - { OV9740_AEC_CTRL1B_WPT2, 0x50 }, - { OV9740_AEC_CTRL0F_WPT, 0x50 }, - { OV9740_AEC_CTRL10_BPT, 0x4c }, - { OV9740_AEC_CTRL1E_BPT2, 0x4c }, - { OV9740_AEC_LO_THRESHOLD, 0x26 }, - - /* BLC Control */ - { OV9740_BLC_AUTO_ENABLE, 0x45 }, - { OV9740_BLC_MODE, 0x18 }, - - /* DVP Control */ - { OV9740_DVP_VSYNC_CTRL02, 0x04 }, - { OV9740_DVP_VSYNC_MODE, 0x00 }, - { OV9740_DVP_VSYNC_CTRL06, 0x08 }, - - /* PLL Setting */ - { OV9740_PLL_MODE_CTRL01, 0x20 }, - { OV9740_PRE_PLL_CLK_DIV, 0x03 }, - { OV9740_PLL_MULTIPLIER, 0x4c }, - { OV9740_VT_SYS_CLK_DIV, 0x01 }, - { OV9740_VT_PIX_CLK_DIV, 0x08 }, - { OV9740_PLL_CTRL3010, 0x01 }, - { OV9740_VFIFO_CTRL00, 0x82 }, - - /* Timing Setting */ - /* VTS */ - { OV9740_FRM_LENGTH_LN_HI, 0x03 }, - { OV9740_FRM_LENGTH_LN_LO, 0x07 }, - /* HTS */ - { OV9740_LN_LENGTH_PCK_HI, 0x06 }, - { OV9740_LN_LENGTH_PCK_LO, 0x62 }, - - /* MIPI Control */ - { OV9740_MIPI_CTRL00, 0x44 }, /* 0x64 for discontinuous clk */ - { OV9740_MIPI_3837, 0x01 }, - { OV9740_MIPI_CTRL01, 0x0f }, - { OV9740_MIPI_CTRL03, 0x05 }, - { OV9740_MIPI_CTRL05, 0x10 }, - { OV9740_VFIFO_RD_CTRL, 0x16 }, - { OV9740_MIPI_CTRL_3012, 0x70 }, - { OV9740_SC_CMMM_MIPI_CTR, 0x01 }, - - /* YUYV order */ - { OV9740_ISP_CTRL19, 0x02 }, -}; - -static u32 ov9740_codes[] = { - MEDIA_BUS_FMT_YUYV8_2X8, -}; - -/* read a register */ -static int ov9740_reg_read(struct i2c_client *client, u16 reg, u8 *val) -{ - int ret; - struct i2c_msg msg[] = { - { - .addr = client->addr, - .flags = 0, - .len = 2, - .buf = (u8 *)®, - }, - { - .addr = client->addr, - .flags = I2C_M_RD, - .len = 1, - .buf = val, - }, - }; - - reg = swab16(reg); - - ret = i2c_transfer(client->adapter, msg, 2); - if (ret < 0) { - dev_err(&client->dev, "Failed reading register 0x%04x!\n", reg); - return ret; - } - - return 0; -} - -/* write a register */ -static int ov9740_reg_write(struct i2c_client *client, u16 reg, u8 val) -{ - struct i2c_msg msg; - struct { - u16 reg; - u8 val; - } __packed buf; - int ret; - - reg = swab16(reg); - - buf.reg = reg; - buf.val = val; - - msg.addr = client->addr; - msg.flags = 0; - msg.len = 3; - msg.buf = (u8 *)&buf; - - ret = i2c_transfer(client->adapter, &msg, 1); - if (ret < 0) { - dev_err(&client->dev, "Failed writing register 0x%04x!\n", reg); - return ret; - } - - return 0; -} - - -/* Read a register, alter its bits, write it back */ -static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset) -{ - u8 val; - int ret; - - ret = ov9740_reg_read(client, reg, &val); - if (ret < 0) { - dev_err(&client->dev, - "[Read]-Modify-Write of register 0x%04x failed!\n", - reg); - return ret; - } - - val |= set; - val &= ~unset; - - ret = ov9740_reg_write(client, reg, val); - if (ret < 0) { - dev_err(&client->dev, - "Read-Modify-[Write] of register 0x%04x failed!\n", - reg); - return ret; - } - - return 0; -} - -static int ov9740_reg_write_array(struct i2c_client *client, - const struct ov9740_reg *regarray, - int regarraylen) -{ - int i; - int ret; - - for (i = 0; i < regarraylen; i++) { - ret = ov9740_reg_write(client, - regarray[i].reg, regarray[i].val); - if (ret < 0) - return ret; - } - - return 0; -} - -/* Start/Stop streaming from the device */ -static int ov9740_s_stream(struct v4l2_subdev *sd, int enable) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct ov9740_priv *priv = to_ov9740(sd); - int ret; - - /* Program orientation register. */ - if (priv->flag_vflip) - ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x2, 0); - else - ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x2); - if (ret < 0) - return ret; - - if (priv->flag_hflip) - ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x1, 0); - else - ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x1); - if (ret < 0) - return ret; - - if (enable) { - dev_dbg(&client->dev, "Enabling Streaming\n"); - /* Start Streaming */ - ret = ov9740_reg_write(client, OV9740_MODE_SELECT, 0x01); - - } else { - dev_dbg(&client->dev, "Disabling Streaming\n"); - /* Software Reset */ - ret = ov9740_reg_write(client, OV9740_SOFTWARE_RESET, 0x01); - if (!ret) - /* Setting Streaming to Standby */ - ret = ov9740_reg_write(client, OV9740_MODE_SELECT, - 0x00); - } - - priv->current_enable = enable; - - return ret; -} - -/* select nearest higher resolution for capture */ -static void ov9740_res_roundup(u32 *width, u32 *height) -{ - /* Width must be a multiple of 4 pixels. */ - *width = ALIGN(*width, 4); - - /* Max resolution is 1280x720 (720p). */ - if (*width > OV9740_MAX_WIDTH) - *width = OV9740_MAX_WIDTH; - - if (*height > OV9740_MAX_HEIGHT) - *height = OV9740_MAX_HEIGHT; -} - -/* Setup registers according to resolution and color encoding */ -static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height) -{ - u32 x_start; - u32 y_start; - u32 x_end; - u32 y_end; - bool scaling = false; - u32 scale_input_x; - u32 scale_input_y; - int ret; - - if ((width != OV9740_MAX_WIDTH) || (height != OV9740_MAX_HEIGHT)) - scaling = true; - - /* - * Try to use as much of the sensor area as possible when supporting - * smaller resolutions. Depending on the aspect ratio of the - * chosen resolution, we can either use the full width of the sensor, - * or the full height of the sensor (or both if the aspect ratio is - * the same as 1280x720. - */ - if ((OV9740_MAX_WIDTH * height) > (OV9740_MAX_HEIGHT * width)) { - scale_input_x = (OV9740_MAX_HEIGHT * width) / height; - scale_input_y = OV9740_MAX_HEIGHT; - } else { - scale_input_x = OV9740_MAX_WIDTH; - scale_input_y = (OV9740_MAX_WIDTH * height) / width; - } - - /* These describe the area of the sensor to use. */ - x_start = (OV9740_MAX_WIDTH - scale_input_x) / 2; - y_start = (OV9740_MAX_HEIGHT - scale_input_y) / 2; - x_end = x_start + scale_input_x - 1; - y_end = y_start + scale_input_y - 1; - - ret = ov9740_reg_write(client, OV9740_X_ADDR_START_HI, x_start >> 8); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_X_ADDR_START_LO, x_start & 0xff); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_HI, y_start >> 8); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_LO, y_start & 0xff); - if (ret) - goto done; - - ret = ov9740_reg_write(client, OV9740_X_ADDR_END_HI, x_end >> 8); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_X_ADDR_END_LO, x_end & 0xff); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_HI, y_end >> 8); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_LO, y_end & 0xff); - if (ret) - goto done; - - ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_HI, width >> 8); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_LO, width & 0xff); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_HI, height >> 8); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_LO, height & 0xff); - if (ret) - goto done; - - ret = ov9740_reg_write(client, OV9740_ISP_CTRL1E, scale_input_x >> 8); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_ISP_CTRL1F, scale_input_x & 0xff); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_ISP_CTRL20, scale_input_y >> 8); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_ISP_CTRL21, scale_input_y & 0xff); - if (ret) - goto done; - - ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_HI, - (scale_input_x - width) >> 8); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_LO, - (scale_input_x - width) & 0xff); - if (ret) - goto done; - - ret = ov9740_reg_write(client, OV9740_ISP_CTRL00, 0xff); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_ISP_CTRL01, 0xef | - (scaling << 4)); - if (ret) - goto done; - ret = ov9740_reg_write(client, OV9740_ISP_CTRL03, 0xff); - -done: - return ret; -} - -/* set the format we will capture in */ -static int ov9740_s_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct ov9740_priv *priv = to_ov9740(sd); - int ret; - - ret = ov9740_reg_write_array(client, ov9740_defaults, - ARRAY_SIZE(ov9740_defaults)); - if (ret < 0) - return ret; - - ret = ov9740_set_res(client, mf->width, mf->height); - if (ret < 0) - return ret; - - priv->current_mf = *mf; - return ret; -} - -static int ov9740_set_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *format) -{ - struct v4l2_mbus_framefmt *mf = &format->format; - - if (format->pad) - return -EINVAL; - - ov9740_res_roundup(&mf->width, &mf->height); - - mf->field = V4L2_FIELD_NONE; - mf->code = MEDIA_BUS_FMT_YUYV8_2X8; - mf->colorspace = V4L2_COLORSPACE_SRGB; - - if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) - return ov9740_s_fmt(sd, mf); - cfg->try_fmt = *mf; - return 0; -} - -static int ov9740_enum_mbus_code(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_mbus_code_enum *code) -{ - if (code->pad || code->index >= ARRAY_SIZE(ov9740_codes)) - return -EINVAL; - - code->code = ov9740_codes[code->index]; - - return 0; -} - -static int ov9740_get_selection(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_selection *sel) -{ - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) - return -EINVAL; - - switch (sel->target) { - case V4L2_SEL_TGT_CROP_BOUNDS: - case V4L2_SEL_TGT_CROP: - sel->r.left = 0; - sel->r.top = 0; - sel->r.width = OV9740_MAX_WIDTH; - sel->r.height = OV9740_MAX_HEIGHT; - return 0; - default: - return -EINVAL; - } -} - -/* Set status of additional camera capabilities */ -static int ov9740_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct ov9740_priv *priv = - container_of(ctrl->handler, struct ov9740_priv, hdl); - - switch (ctrl->id) { - case V4L2_CID_VFLIP: - priv->flag_vflip = ctrl->val; - break; - case V4L2_CID_HFLIP: - priv->flag_hflip = ctrl->val; - break; - default: - return -EINVAL; - } - - return 0; -} - -static int ov9740_s_power(struct v4l2_subdev *sd, int on) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - struct ov9740_priv *priv = to_ov9740(sd); - int ret; - - if (on) { - ret = soc_camera_power_on(&client->dev, ssdd, priv->clk); - if (ret < 0) - return ret; - - if (priv->current_enable) { - ov9740_s_fmt(sd, &priv->current_mf); - ov9740_s_stream(sd, 1); - } - } else { - if (priv->current_enable) { - ov9740_s_stream(sd, 0); - priv->current_enable = true; - } - - soc_camera_power_off(&client->dev, ssdd, priv->clk); - } - - return 0; -} - -#ifdef CONFIG_VIDEO_ADV_DEBUG -static int ov9740_get_register(struct v4l2_subdev *sd, - struct v4l2_dbg_register *reg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret; - u8 val; - - if (reg->reg & ~0xffff) - return -EINVAL; - - reg->size = 2; - - ret = ov9740_reg_read(client, reg->reg, &val); - if (ret) - return ret; - - reg->val = (__u64)val; - - return ret; -} - -static int ov9740_set_register(struct v4l2_subdev *sd, - const struct v4l2_dbg_register *reg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - - if (reg->reg & ~0xffff || reg->val & ~0xff) - return -EINVAL; - - return ov9740_reg_write(client, reg->reg, reg->val); -} -#endif - -static int ov9740_video_probe(struct i2c_client *client) -{ - struct v4l2_subdev *sd = i2c_get_clientdata(client); - struct ov9740_priv *priv = to_ov9740(sd); - u8 modelhi, modello; - int ret; - - ret = ov9740_s_power(&priv->subdev, 1); - if (ret < 0) - return ret; - - /* - * check and show product ID and manufacturer ID - */ - ret = ov9740_reg_read(client, OV9740_MODEL_ID_HI, &modelhi); - if (ret < 0) - goto done; - - ret = ov9740_reg_read(client, OV9740_MODEL_ID_LO, &modello); - if (ret < 0) - goto done; - - priv->model = (modelhi << 8) | modello; - - ret = ov9740_reg_read(client, OV9740_REVISION_NUMBER, &priv->revision); - if (ret < 0) - goto done; - - ret = ov9740_reg_read(client, OV9740_MANUFACTURER_ID, &priv->manid); - if (ret < 0) - goto done; - - ret = ov9740_reg_read(client, OV9740_SMIA_VERSION, &priv->smiaver); - if (ret < 0) - goto done; - - if (priv->model != 0x9740) { - ret = -ENODEV; - goto done; - } - - dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, Manufacturer 0x%02x, SMIA Version 0x%02x\n", - priv->model, priv->revision, priv->manid, priv->smiaver); - - ret = v4l2_ctrl_handler_setup(&priv->hdl); - -done: - ov9740_s_power(&priv->subdev, 0); - return ret; -} - -/* Request bus settings on camera side */ -static int ov9740_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - - cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | - V4L2_MBUS_DATA_ACTIVE_HIGH; - cfg->type = V4L2_MBUS_PARALLEL; - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); - - return 0; -} - -static const struct v4l2_subdev_video_ops ov9740_video_ops = { - .s_stream = ov9740_s_stream, - .g_mbus_config = ov9740_g_mbus_config, -}; - -static const struct v4l2_subdev_core_ops ov9740_core_ops = { - .s_power = ov9740_s_power, -#ifdef CONFIG_VIDEO_ADV_DEBUG - .g_register = ov9740_get_register, - .s_register = ov9740_set_register, -#endif -}; - -static const struct v4l2_subdev_pad_ops ov9740_pad_ops = { - .enum_mbus_code = ov9740_enum_mbus_code, - .get_selection = ov9740_get_selection, - .set_fmt = ov9740_set_fmt, -}; - -static const struct v4l2_subdev_ops ov9740_subdev_ops = { - .core = &ov9740_core_ops, - .video = &ov9740_video_ops, - .pad = &ov9740_pad_ops, -}; - -static const struct v4l2_ctrl_ops ov9740_ctrl_ops = { - .s_ctrl = ov9740_s_ctrl, -}; - -/* - * i2c_driver function - */ -static int ov9740_probe(struct i2c_client *client, - const struct i2c_device_id *did) -{ - struct ov9740_priv *priv; - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - int ret; - - if (!ssdd) { - dev_err(&client->dev, "Missing platform_data for driver\n"); - return -EINVAL; - } - - priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - v4l2_i2c_subdev_init(&priv->subdev, client, &ov9740_subdev_ops); - v4l2_ctrl_handler_init(&priv->hdl, 13); - v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops, - V4L2_CID_VFLIP, 0, 1, 1, 0); - v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops, - V4L2_CID_HFLIP, 0, 1, 1, 0); - priv->subdev.ctrl_handler = &priv->hdl; - if (priv->hdl.error) - return priv->hdl.error; - - priv->clk = v4l2_clk_get(&client->dev, "mclk"); - if (IS_ERR(priv->clk)) { - ret = PTR_ERR(priv->clk); - goto eclkget; - } - - ret = ov9740_video_probe(client); - if (ret < 0) { - v4l2_clk_put(priv->clk); -eclkget: - v4l2_ctrl_handler_free(&priv->hdl); - } - - return ret; -} - -static int ov9740_remove(struct i2c_client *client) -{ - struct ov9740_priv *priv = i2c_get_clientdata(client); - - v4l2_clk_put(priv->clk); - v4l2_device_unregister_subdev(&priv->subdev); - v4l2_ctrl_handler_free(&priv->hdl); - return 0; -} - -static const struct i2c_device_id ov9740_id[] = { - { "ov9740", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ov9740_id); - -static struct i2c_driver ov9740_i2c_driver = { - .driver = { - .name = "ov9740", - }, - .probe = ov9740_probe, - .remove = ov9740_remove, - .id_table = ov9740_id, -}; - -module_i2c_driver(ov9740_i2c_driver); - -MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV9740"); -MODULE_AUTHOR("Andrew Chew <achew@nvidia.com>"); -MODULE_LICENSE("GPL v2"); |