diff options
Diffstat (limited to 'drivers/staging/agnx/phy.h')
| -rw-r--r-- | drivers/staging/agnx/phy.h | 409 |
1 files changed, 0 insertions, 409 deletions
diff --git a/drivers/staging/agnx/phy.h b/drivers/staging/agnx/phy.h deleted file mode 100644 index a955f05361e7..000000000000 --- a/drivers/staging/agnx/phy.h +++ /dev/null @@ -1,409 +0,0 @@ -#ifndef AGNX_PHY_H_ -#define AGNX_PHY_H_ - -#include "agnx.h" - -/* Transmission Managment Registers */ -#define AGNX_TXM_BASE 0x0000 -#define AGNX_TXM_CTL 0x0000 /* control register */ -#define AGNX_TXM_ETMF 0x0004 /* enable transmission management functions */ -#define AGNX_TXM_TXTEMP 0x0008 /* transmission template */ -#define AGNX_TXM_RETRYSTAID 0x000c /* Retry Station ID */ -#define AGNX_TXM_TIMESTAMPLO 0x0010 /* Timestamp Lo */ -#define AGNX_TXM_TIMESTAMPHI 0x0014 /* Timestamp Hi */ -#define AGNX_TXM_TXDELAY 0x0018 /* tx delay */ -#define AGNX_TXM_TBTTLO 0x0020 /* tbtt Lo */ -#define AGNX_TXM_TBTTHI 0x0024 /* tbtt Hi */ -#define AGNX_TXM_BEAINTER 0x0028 /* Beacon Interval */ -#define AGNX_TXM_NAV 0x0030 /* NAV */ -#define AGNX_TXM_CFPMDV 0x0034 /* CFP MDV */ -#define AGNX_TXM_CFPERCNT 0x0038 /* CFP period count */ -#define AGNX_TXM_PROBDELAY 0x003c /* probe delay */ -#define AGNX_TXM_LISINTERCNT 0x0040 /* listen interval count */ -#define AGNX_TXM_DTIMPERICNT 0x004c /* DTIM period count */ - -#define AGNX_TXM_BEACON_CTL 0x005c /* beacon control */ - -#define AGNX_TXM_SCHEMPCNT 0x007c /* schedule empty count */ -#define AGNX_TXM_MAXTIMOUT 0x0084 /* max timeout exceed count */ -#define AGNX_TXM_MAXCFPTIM 0x0088 /* max CF poll timeout count */ -#define AGNX_TXM_MAXRXTIME 0x008c /* max RX timeout count */ -#define AGNX_TXM_MAXACKTIM 0x0090 /* max ACK timeout count */ -#define AGNX_TXM_DIF01 0x00a0 /* DIF 0-1 */ -#define AGNX_TXM_DIF23 0x00a4 /* DIF 2-3 */ -#define AGNX_TXM_DIF45 0x00a8 /* DIF 4-5 */ -#define AGNX_TXM_DIF67 0x00ac /* DIF 6-7 */ -#define AGNX_TXM_SIFSPIFS 0x00b0 /* SIFS/PIFS */ -#define AGNX_TXM_TIFSEIFS 0x00b4 /* TIFS/EIFS */ -#define AGNX_TXM_MAXCCACNTSLOT 0x00b8 /* max CCA count slot */ -#define AGNX_TXM_SLOTLIMIT 0x00bc /* slot limit/1 msec limit */ -#define AGNX_TXM_CFPOLLRXTIM 0x00f0 /* CF poll RX timeout count */ -#define AGNX_TXM_CFACKT11B 0x00f4 /* CF ack timeout limit for 11b */ -#define AGNX_TXM_CW0 0x0100 /* CW 0 */ -#define AGNX_TXM_SLBEALIM0 0x0108 /* short/long beacon limit 0 */ -#define AGNX_TXM_CW1 0x0120 /* CW 1 */ -#define AGNX_TXM_SLBEALIM1 0x0128 /* short/long beacon limit 1 */ -#define AGNX_TXM_CW2 0x0140 /* CW 2 */ -#define AGNX_TXM_SLBEALIM2 0x0148 /* short/long beacon limit 2 */ -#define AGNX_TXM_CW3 0x0160 /* CW 3 */ -#define AGNX_TXM_SLBEALIM3 0x0168 /* short/long beacon limit 3 */ -#define AGNX_TXM_CW4 0x0180 /* CW 4 */ -#define AGNX_TXM_SLBEALIM4 0x0188 /* short/long beacon limit 4 */ -#define AGNX_TXM_CW5 0x01a0 /* CW 5 */ -#define AGNX_TXM_SLBEALIM5 0x01a8 /* short/long beacon limit 5 */ -#define AGNX_TXM_CW6 0x01c0 /* CW 6 */ -#define AGNX_TXM_SLBEALIM6 0x01c8 /* short/long beacon limit 6 */ -#define AGNX_TXM_CW7 0x01e0 /* CW 7 */ -#define AGNX_TXM_SLBEALIM7 0x01e8 /* short/long beacon limit 7 */ -#define AGNX_TXM_BEACONTEMP 0x1000 /* beacon template */ -#define AGNX_TXM_STAPOWTEMP 0x1a00 /* Station Power Template */ - -/* Receive Management Control Registers */ -#define AGNX_RXM_BASE 0x2000 -#define AGNX_RXM_REQRATE 0x2000 /* requested rate */ -#define AGNX_RXM_MACHI 0x2004 /* first 4 bytes of mac address */ -#define AGNX_RXM_MACLO 0x2008 /* last 2 bytes of mac address */ -#define AGNX_RXM_BSSIDHI 0x200c /* bssid hi */ -#define AGNX_RXM_BSSIDLO 0x2010 /* bssid lo */ -#define AGNX_RXM_HASH_CMD_FLAG 0x2014 /* Flags for the RX Hash Command Default:0 */ -#define AGNX_RXM_HASH_CMD_HIGH 0x2018 /* The High half of the Hash Command */ -#define AGNX_RXM_HASH_CMD_LOW 0x201c /* The Low half of the Hash Command */ -#define AGNX_RXM_ROUTAB 0x2020 /* routing table */ -#define ROUTAB_SUBTYPE_SHIFT 24 -#define ROUTAB_TYPE_SHIFT 28 -#define ROUTAB_STATUS_SHIFT 30 -#define ROUTAB_RW_SHIFT 31 -#define ROUTAB_ROUTE_DROP 0xf00000 /* Drop */ -#define ROUTAB_ROUTE_CPU 0x400000 /* CPU */ -#define ROUTAB_ROUTE_ENCRY 0x500800 /* Encryption */ -#define ROUTAB_ROUTE_RFP 0x800000 /* RFP */ - -#define ROUTAB_TYPE_MANAG 0x0 /* Management */ -#define ROUTAB_TYPE_CTL 0x1 /* Control */ -#define ROUTAB_TYPE_DATA 0x2 /* Data */ - -#define ROUTAB_SUBTYPE_DATA 0x0 -#define ROUTAB_SUBTYPE_DATAACK 0x1 -#define ROUTAB_SUBTYPE_DATAPOLL 0x2 -#define ROUTAB_SUBTYPE_DATAPOLLACK 0x3 -#define ROUTAB_SUBTYPE_NULL 0x4 /* NULL */ -#define ROUTAB_SUBTYPE_NULLACK 0x5 -#define ROUTAB_SUBTYPE_NULLPOLL 0x6 -#define ROUTAB_SUBTYPE_NULLPOLLACK 0x7 -#define ROUTAB_SUBTYPE_QOSDATA 0x8 /* QOS DATA */ -#define ROUTAB_SUBTYPE_QOSDATAACK 0x9 -#define ROUTAB_SUBTYPE_QOSDATAPOLL 0xa -#define ROUTAB_SUBTYPE_QOSDATAACKPOLL 0xb -#define ROUTAB_SUBTYPE_QOSNULL 0xc -#define ROUTAB_SUBTYPE_QOSNULLACK 0xd -#define ROUTAB_SUBTYPE_QOSNULLPOLL 0xe -#define ROUTAB_SUBTYPE_QOSNULLPOLLACK 0xf -#define AGNX_RXM_DELAY11 0x2024 /* delay 11(AB) */ -#define AGNX_RXM_SOF_CNT 0x2028 /* SOF Count */ -#define AGNX_RXM_FRAG_CNT 0x202c /* Fragment Count*/ -#define AGNX_RXM_FCS_CNT 0x2030 /* FCS Count */ -#define AGNX_RXM_BSSID_MISS_CNT 0x2034 /* BSSID Miss Count */ -#define AGNX_RXM_PDU_ERR_CNT 0x2038 /* PDU Error Count */ -#define AGNX_RXM_DEST_MISS_CNT 0x203C /* Destination Miss Count */ -#define AGNX_RXM_DROP_CNT 0x2040 /* Drop Count */ -#define AGNX_RXM_ABORT_CNT 0x2044 /* Abort Count */ -#define AGNX_RXM_RELAY_CNT 0x2048 /* Relay Count */ -#define AGNX_RXM_HASH_MISS_CNT 0x204c /* Hash Miss Count */ -#define AGNX_RXM_SA_HI 0x2050 /* Address of received packet Hi */ -#define AGNX_RXM_SA_LO 0x2054 /* Address of received packet Lo */ -#define AGNX_RXM_HASH_DUMP_LST 0x2100 /* Contains Hash Data */ -#define AGNX_RXM_HASH_DUMP_MST 0x2104 /* Contains Hash Data */ -#define AGNX_RXM_HASH_DUMP_DATA 0x2108 /* The Station ID to dump */ - - -/* Encryption Managment */ -#define AGNX_ENCRY_BASE 0x2400 -#define AGNX_ENCRY_WEPKEY0 0x2440 /* wep key #0 */ -#define AGNX_ENCRY_WEPKEY1 0x2444 /* wep key #1 */ -#define AGNX_ENCRY_WEPKEY2 0x2448 /* wep key #2 */ -#define AGNX_ENCRY_WEPKEY3 0x244c /* wep key #3 */ -#define AGNX_ENCRY_CCMRECTL 0x2460 /* ccm replay control */ - - -/* Band Management Registers */ -#define AGNX_BM_BASE 0x2c00 -#define AGNX_BM_BMCTL 0x2c00 /* band management control */ -#define AGNX_BM_TXWADDR 0x2c18 /* tx workqueue address start */ -#define AGNX_BM_TXTOPEER 0x2c24 /* transmit to peers */ -#define AGNX_BM_FPLHP 0x2c2c /* free pool list head pointer */ -#define AGNX_BM_FPLTP 0x2c30 /* free pool list tail pointer */ -#define AGNX_BM_FPCNT 0x2c34 /* free pool count */ -#define AGNX_BM_CIPDUWCNT 0x2c38 /* card interface pdu workqueue count */ -#define AGNX_BM_SPPDUWCNT 0x2c3c /* sp pdu workqueue count */ -#define AGNX_BM_RFPPDUWCNT 0x2c40 /* rfp pdu workqueue count */ -#define AGNX_BM_RHPPDUWCNT 0x2c44 /* rhp pdu workqueue count */ -#define AGNX_BM_CIWQCTL 0x2c48 /* Card Interface WorkQueue Control */ -#define AGNX_BM_CPUTXWCTL 0x2c50 /* cpu tx workqueue control */ -#define AGNX_BM_CPURXWCTL 0x2c58 /* cpu rx workqueue control */ -#define AGNX_BM_CPULWCTL 0x2c60 /* cpu low workqueue control */ -#define AGNX_BM_CPUHWCTL 0x2c68 /* cpu high workqueue control */ -#define AGNX_BM_SPTXWCTL 0x2c70 /* sp tx workqueue control */ -#define AGNX_BM_SPRXWCTL 0x2c78 /* sp rx workqueue control */ -#define AGNX_BM_RFPWCTL 0x2c80 /* RFP workqueue control */ -#define AGNX_BM_MTSM 0x2c90 /* Multicast Transmit Station Mask */ - -/* Card Interface Registers (32bits) */ -#define AGNX_CIR_BASE 0x3000 -#define AGNX_CIR_BLKCTL 0x3000 /* block control*/ -#define AGNX_STAT_TX 0x1 -#define AGNX_STAT_RX 0x2 -#define AGNX_STAT_X 0x4 -/* Below two interrupt flags will be set by our but not CPU or the card */ -#define AGNX_STAT_TXD 0x10 -#define AGNX_STAT_TXM 0x20 - -#define AGNX_CIR_ADDRWIN 0x3004 /* Addressable Windows*/ -#define AGNX_CIR_ENDIAN 0x3008 /* card endianness */ -#define AGNX_CIR_SERIALITF 0x3020 /* serial interface */ -#define AGNX_CIR_RXCFG 0x3040 /* receive config */ -#define ENABLE_RX_INTERRUPT 0x20 -#define RX_CACHE_LINE 0x8 -/* the RX fragment length */ -#define FRAG_LEN_256 0x0 /* 256B */ -#define FRAG_LEN_512 0x1 -#define FRAG_LEN_1024 0x2 -#define FRAG_LEN_2048 0x3 -#define FRAG_BE 0x10 -#define AGNX_CIR_RXCTL 0x3050 /* receive control */ -/* memory address, chipside */ -#define AGNX_CIR_RXCMSTART 0x3054 /* receive client memory start */ -#define AGNX_CIR_RXCMEND 0x3058 /* receive client memory end */ -/* memory address, pci */ -#define AGNX_CIR_RXHOSTADDR 0x3060 /* receive hostside address */ -/* memory address, chipside */ -#define AGNX_CIR_RXCLIADDR 0x3064 /* receive clientside address */ -#define AGNX_CIR_RXDMACTL 0x3068 /* receive dma control */ -#define AGNX_CIR_TXCFG 0x3080 /* transmit config */ -#define AGNX_CIR_TXMCTL 0x3090 /* Transmit Management Control */ -#define ENABLE_TX_INTERRUPT 0x20 -#define TX_CACHE_LINE 0x8 -#define AGNX_CIR_TXMSTART 0x3094 /* Transmit Management Start */ -#define AGNX_CIR_TXMEND 0x3098 /* Transmit Management End */ -#define AGNX_CIR_TXDCTL 0x30a0 /* transmit data control */ -/* memeory address, chipset */ -#define AGNX_CIR_TXDSTART 0x30a4 /* transmit data start */ -#define AGNX_CIR_TXDEND 0x30a8 /* transmit data end */ -#define AGNX_CIR_TXMHADDR 0x30b0 /* Transmit Management Hostside Address */ -#define AGNX_CIR_TXMCADDR 0x30b4 /* Transmit Management Clientside Address */ -#define AGNX_CIR_TXDMACTL 0x30b8 /* transmit dma control */ - - -/* Power Managment Unit */ -#define AGNX_PM_BASE 0x3c00 -#define AGNX_PM_PMCTL 0x3c00 /* PM Control*/ -#define AGNX_PM_MACMSW 0x3c08 /* MAC Manual Slow Work Enable */ -#define AGNX_PM_RFCTL 0x3c0c /* RF Control */ -#define AGNX_PM_PHYMW 0x3c14 /* Phy Mannal Work */ -#define AGNX_PM_SOFTRST 0x3c18 /* PMU Soft Reset */ -#define AGNX_PM_PLLCTL 0x3c1c /* PMU PLL control*/ -#define AGNX_PM_TESTPHY 0x3c24 /* PMU Test Phy */ - - -/* Interrupt Control interface */ -#define AGNX_INT_BASE 0x4000 -#define AGNX_INT_STAT 0x4000 /* interrupt status */ -#define AGNX_INT_MASK 0x400c /* interrupt mask */ -/* FIXME */ -#define IRQ_TX_BEACON 0x1 /* TX Beacon */ -#define IRQ_TX_RETRY 0x8 /* TX Retry Interrupt */ -#define IRQ_TX_ACTIVITY 0x10 /* TX Activity */ -#define IRQ_RX_ACTIVITY 0x20 /* RX Activity */ -/* FIXME I guess that instead RX a none exist staion's packet or - the station hasn't been init */ -#define IRQ_RX_X 0x40 -#define IRQ_RX_Y 0x80 /* RX ? */ -#define IRQ_RX_HASHHIT 0x100 /* RX Hash Hit */ -#define IRQ_RX_FRAME 0x200 /* RX Frame */ -#define IRQ_ERR_INT 0x400 /* Error Interrupt */ -#define IRQ_TX_QUE_FULL 0x800 /* TX Workqueue Full */ -#define IRQ_BANDMAN_ERR 0x10000 /* Bandwidth Management Error */ -#define IRQ_TX_DISABLE 0x20000 /* TX Disable */ -#define IRQ_RX_IVASESKEY 0x80000 /* RX Invalid Session Key */ -#define IRQ_RX_KEYIDMIS 0x100000 /* RX key ID Mismatch */ -#define IRQ_REP_THHIT 0x200000 /* Replay Threshold Hit */ -#define IRQ_TIMER1 0x4000000 /* Timer1 */ -#define IRQ_TIMER_CNT 0x10000000 /* Timer Count */ -#define IRQ_PHY_FASTINT 0x20000000 /* Phy Fast Interrupt */ -#define IRQ_PHY_SLOWINT 0x40000000 /* Phy Slow Interrupt */ -#define IRQ_OTHER 0x80000000 /* Unknow interrupt */ -#define AGNX_IRQ_ALL 0xffffffff - -/* System Interface */ -#define AGNX_SYSITF_BASE 0x4400 -#define AGNX_SYSITF_SYSMODE 0x4400 /* system mode */ -#define AGNX_SYSITF_GPIOIN 0x4410 /* GPIO In */ -/* PIN lines for leds? */ -#define AGNX_SYSITF_GPIOUT 0x4414 /* GPIO Out */ - -/* Timer Control */ -#define AGNX_TIMCTL_TIMER1 0x4800 /* Timer 1 */ -#define AGNX_TIMCTL_TIM1CTL 0x4808 /* Timer 1 Control */ - - -/* Antenna Calibration Interface */ -#define AGNX_ACI_BASE 0x5000 -#define AGNX_ACI_MODE 0x5000 /* Mode */ -#define AGNX_ACI_MEASURE 0x5004 /* Measure */ -#define AGNX_ACI_SELCHAIN 0x5008 /* Select Chain */ -#define AGNX_ACI_LEN 0x500c /* Length */ -#define AGNX_ACI_TIMER1 0x5018 /* Timer 1 */ -#define AGNX_ACI_TIMER2 0x501c /* Timer 2 */ -#define AGNX_ACI_OFFSET 0x5020 /* Offset */ -#define AGNX_ACI_STATUS 0x5030 /* Status */ -#define CALI_IDLE 0x0 -#define CALI_DONE 0x1 -#define CALI_BUSY 0x2 -#define CALI_ERR 0x3 -#define AGNX_ACI_AICCHA0OVE 0x5034 /* AIC Channel 0 Override */ -#define AGNX_ACI_AICCHA1OVE 0x5038 /* AIC Channel 1 Override */ - -/* Gain Control Registers */ -#define AGNX_GCR_BASE 0x9000 -/* threshold of primary antenna */ -#define AGNX_GCR_THD0A 0x9000 /* threshold? D0 A */ -/* low threshold of primary antenna */ -#define AGNX_GCR_THD0AL 0x9004 /* threshold? D0 A low */ -/* threshold of secondary antenna */ -#define AGNX_GCR_THD0B 0x9008 /* threshold? D0_B */ -#define AGNX_GCR_DUNSAT 0x900c /* d unsaturated */ -#define AGNX_GCR_DSAT 0x9010 /* d saturated */ -#define AGNX_GCR_DFIRCAL 0x9014 /* D Fir/Cal */ -#define AGNX_GCR_DGCTL11A 0x9018 /* d gain control 11a */ -#define AGNX_GCR_DGCTL11B 0x901c /* d gain control 11b */ -/* strength of gain */ -#define AGNX_GCR_GAININIT 0x9020 /* gain initialization */ -#define AGNX_GCR_THNOSIG 0x9024 /* threhold no signal */ -#define AGNX_GCR_COARSTEP 0x9028 /* coarse stepping */ -#define AGNX_GCR_SIFST11A 0x902c /* sifx time 11a */ -#define AGNX_GCR_SIFST11B 0x9030 /* sifx time 11b */ -#define AGNX_GCR_CWDETEC 0x9034 /* cw detection */ -#define AGNX_GCR_0X38 0x9038 /* ???? */ -#define AGNX_GCR_BOACT 0x903c /* BO Active */ -#define AGNX_GCR_BOINACT 0x9040 /* BO Inactive */ -#define AGNX_GCR_BODYNA 0x9044 /* BO dynamic */ -/* 802.11 mode(a,b,g) */ -#define AGNX_GCR_DISCOVMOD 0x9048 /* discovery mode */ -#define AGNX_GCR_NLISTANT 0x904c /* number of listening antenna */ -#define AGNX_GCR_NACTIANT 0x9050 /* number of active antenna */ -#define AGNX_GCR_NMEASANT 0x9054 /* number of measuring antenna */ -#define AGNX_GCR_NCAPTANT 0x9058 /* number of capture antenna */ -#define AGNX_GCR_THCAP11A 0x905c /* threshold capture 11a */ -#define AGNX_GCR_THCAP11B 0x9060 /* threshold capture 11b */ -#define AGNX_GCR_THCAPRX11A 0x9064 /* threshold capture rx 11a */ -#define AGNX_GCR_THCAPRX11B 0x9068 /* threshold capture rx 11b */ -#define AGNX_GCR_THLEVDRO 0x906c /* threshold level drop */ -#define AGNX_GCR_GAINSET0 0x9070 /* Gainset 0 */ -#define AGNX_GCR_GAINSET1 0x9074 /* Gainset 1 */ -#define AGNX_GCR_GAINSET2 0x9078 /* Gainset 2 */ -#define AGNX_GCR_MAXRXTIME11A 0x907c /* maximum rx time 11a */ -#define AGNX_GCR_MAXRXTIME11B 0x9080 /* maximum rx time 11b */ -#define AGNX_GCR_CORRTIME 0x9084 /* correction time */ -/* reset the subsystem, 0 = disable, 1 = enable */ -#define AGNX_GCR_RSTGCTL 0x9088 /* reset gain control */ -/* channel receiving */ -#define AGNX_GCR_RXCHANEL 0x908c /* receive channel */ -#define AGNX_GCR_NOISE0 0x9090 /* Noise 0 */ -#define AGNX_GCR_NOISE1 0x9094 /* Noise 1 */ -#define AGNX_GCR_NOISE2 0x9098 /* Noise 2 */ -#define AGNX_GCR_SIGHTH 0x909c /* Signal High Threshold */ -#define AGNX_GCR_SIGLTH 0x90a0 /* Signal Low Threshold */ -#define AGNX_GCR_CORRDROP 0x90a4 /* correction drop */ -/* threshold of tertiay antenna */ -#define AGNX_GCR_THCD 0x90a8 /* threshold? CD */ -#define AGNX_GCR_THCS 0x90ac /* threshold? CS */ -#define AGNX_GCR_MAXPOWDIFF 0x90b8 /* maximum power difference */ -#define AGNX_GCR_TRACNT4 0x90ec /* Transition Count 4 */ -#define AGNX_GCR_TRACNT5 0x90f0 /* transition count 5 */ -#define AGNX_GCR_TRACNT6 0x90f4 /* transition count 6 */ -#define AGNX_GCR_TRACNT7 0x90f8 /* transition coutn 7 */ -#define AGNX_GCR_TESTBUS 0x911c /* test bus */ -#define AGNX_GCR_CHAINNUM 0x9120 /* Number of Chains */ -#define AGNX_GCR_ANTCFG 0x9124 /* Antenna Config */ -#define AGNX_GCR_THJUMP 0x912c /* threhold jump */ -#define AGNX_GCR_THPOWER 0x9130 /* threshold power */ -#define AGNX_GCR_THPOWCLIP 0x9134 /* threshold power clip*/ -#define AGNX_GCR_FORCECTLCLK 0x9138 /* Force Gain Control Clock */ -#define AGNX_GCR_GAINSETWRITE 0x913c /* Gainset Write */ -#define AGNX_GCR_THD0BTFEST 0x9140 /* threshold d0 b tf estimate */ -#define AGNX_GCR_THRX11BPOWMIN 0x9144 /* threshold rx 11b power minimum */ -#define AGNX_GCR_0X14c 0x914c /* ?? */ -#define AGNX_GCR_0X150 0x9150 /* ?? */ -#define AGNX_GCR_RXOVERIDE 0x9194 /* recieve override */ -#define AGNX_GCR_WATCHDOG 0x91b0 /* watchdog timeout */ - - -/* Spi Interface */ -#define AGNX_SPI_BASE 0xdc00 -#define AGNX_SPI_CFG 0xdc00 /* spi configuration */ -/* Only accept 16 bits */ -#define AGNX_SPI_WMSW 0xdc04 /* write most significant word */ -/* Only accept 16 bits */ -#define AGNX_SPI_WLSW 0xdc08 /* write least significant word */ -#define AGNX_SPI_CTL 0xdc0c /* spi control */ -#define AGNX_SPI_RMSW 0xdc10 /* read most significant word */ -#define AGNX_SPI_RLSW 0xdc14 /* read least significant word */ -/* SPI Control Mask */ -#define SPI_READ_CTL 0x4000 /* read control */ -#define SPI_BUSY_CTL 0x8000 /* busy control */ -/* RF and synth chips in spi */ -#define RF_CHIP0 0x400 -#define RF_CHIP1 0x800 -#define RF_CHIP2 0x1000 -#define SYNTH_CHIP 0x2000 - -/* Unknown register */ -#define AGNX_UNKNOWN_BASE 0x7800 - -/* FIXME MonitorGain */ -#define AGNX_MONGCR_BASE 0x12000 - -/* Gain Table */ -#define AGNX_GAIN_TABLE 0x12400 - -/* The initial FIR coefficient table */ -#define AGNX_FIR_BASE 0x19804 - -#define AGNX_ENGINE_LOOKUP_TBL 0x800 - -/* eeprom commands */ -#define EEPROM_CMD_NULL 0x0 /* NULL */ -#define EEPROM_CMD_WRITE 0x2 /* write */ -#define EEPROM_CMD_READ 0x3 /* read */ -#define EEPROM_CMD_STATUSREAD 0x5 /* status register read */ -#define EEPROM_CMD_WRITEENABLE 0x6 /* write enable */ -#define EEPROM_CMD_CONFIGURE 0x7 /* configure */ - -#define EEPROM_DATAFORCOFIGURE 0x6 /* ??? */ - -/* eeprom address */ -#define EEPROM_ADDR_SUBVID 0x0 /* Sub Vendor ID */ -#define EEPROM_ADDR_SUBSID 0x2 /* Sub System ID */ -#define EEPROM_ADDR_MACADDR 0x146 /* MAC Address */ -#define EEPROM_ADDR_LOTYPE 0x14f /* LO type */ - -struct agnx_eeprom { - u8 data; /* date */ - u16 address; /* address in EEPROM */ - u8 cmd; /* command, unknown, status */ -} __attribute__((__packed__)); - -#define AGNX_EEPROM_COMMAND_SHIFT 5 -#define AGNX_EEPROM_COMMAND_STAT 0x01 - -void disable_receiver(struct agnx_priv *priv); -void enable_receiver(struct agnx_priv *priv); -u8 read_from_eeprom(struct agnx_priv *priv, u16 address); -void agnx_hw_init(struct agnx_priv *priv); -int agnx_hw_reset(struct agnx_priv *priv); -int agnx_set_ssid(struct agnx_priv *priv, u8 *ssid, size_t ssid_len); -void agnx_set_bssid(struct agnx_priv *priv, const u8 *bssid); -void enable_power_saving(struct agnx_priv *priv); -void disable_power_saving(struct agnx_priv *priv); -void calibrate_antenna_period(unsigned long data); - -#endif /* AGNX_PHY_H_ */ |