summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig20
-rw-r--r--drivers/spi/Makefile3
-rw-r--r--drivers/spi/spi-sun4i.c478
-rw-r--r--drivers/spi/spi-sun6i.c484
-rw-r--r--drivers/spi/spi-tegra114.c4
-rw-r--r--drivers/spi/spi-ti-qspi.c1
-rw-r--r--drivers/spi/spi-ti-ssp.c378
-rw-r--r--drivers/spi/spi-topcliff-pch.c47
-rw-r--r--drivers/spi/spi-txx9.c25
-rw-r--r--drivers/spi/spi-xcomm.c12
-rw-r--r--drivers/spi/spi.c12
11 files changed, 1005 insertions, 459 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2a1b0a7d9415..756b5b3ca200 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -458,6 +458,19 @@ config SPI_SIRF
help
SPI driver for CSR SiRFprimaII SoCs
+config SPI_SUN4I
+ tristate "Allwinner A10 SoCs SPI controller"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ help
+ SPI driver for Allwinner sun4i, sun5i and sun7i SoCs
+
+config SPI_SUN6I
+ tristate "Allwinner A31 SPI controller"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ depends on RESET_CONTROLLER
+ help
+ This enables using the SPI controller on the Allwinner A31 SoCs.
+
config SPI_MXS
tristate "Freescale MXS SPI controller"
depends on ARCH_MXS
@@ -490,13 +503,6 @@ config SPI_TEGRA20_SLINK
help
SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface.
-config SPI_TI_SSP
- tristate "TI Sequencer Serial Port - SPI Support"
- depends on MFD_TI_SSP
- help
- This selects an SPI master implementation using a TI sequencer
- serial port.
-
config SPI_TOPCLIFF_PCH
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
depends on PCI
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index e598147b06ef..e245b94d07d8 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -71,10 +71,11 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
obj-$(CONFIG_SPI_SIRF) += spi-sirf.o
+obj-$(CONFIG_SPI_SUN4I) += spi-sun4i.o
+obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o
obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o
obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o
obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi-tegra20-slink.o
-obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.o
obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
new file mode 100644
index 000000000000..d266a8702067
--- /dev/null
+++ b/drivers/spi/spi-sun4i.c
@@ -0,0 +1,478 @@
+/*
+ * Copyright (C) 2012 - 2014 Allwinner Tech
+ * Pan Nan <pannan@allwinnertech.com>
+ *
+ * Copyright (C) 2014 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/workqueue.h>
+
+#include <linux/spi/spi.h>
+
+#define SUN4I_FIFO_DEPTH 64
+
+#define SUN4I_RXDATA_REG 0x00
+
+#define SUN4I_TXDATA_REG 0x04
+
+#define SUN4I_CTL_REG 0x08
+#define SUN4I_CTL_ENABLE BIT(0)
+#define SUN4I_CTL_MASTER BIT(1)
+#define SUN4I_CTL_CPHA BIT(2)
+#define SUN4I_CTL_CPOL BIT(3)
+#define SUN4I_CTL_CS_ACTIVE_LOW BIT(4)
+#define SUN4I_CTL_LMTF BIT(6)
+#define SUN4I_CTL_TF_RST BIT(8)
+#define SUN4I_CTL_RF_RST BIT(9)
+#define SUN4I_CTL_XCH BIT(10)
+#define SUN4I_CTL_CS_MASK 0x3000
+#define SUN4I_CTL_CS(cs) (((cs) << 12) & SUN4I_CTL_CS_MASK)
+#define SUN4I_CTL_DHB BIT(15)
+#define SUN4I_CTL_CS_MANUAL BIT(16)
+#define SUN4I_CTL_CS_LEVEL BIT(17)
+#define SUN4I_CTL_TP BIT(18)
+
+#define SUN4I_INT_CTL_REG 0x0c
+#define SUN4I_INT_CTL_TC BIT(16)
+
+#define SUN4I_INT_STA_REG 0x10
+
+#define SUN4I_DMA_CTL_REG 0x14
+
+#define SUN4I_WAIT_REG 0x18
+
+#define SUN4I_CLK_CTL_REG 0x1c
+#define SUN4I_CLK_CTL_CDR2_MASK 0xff
+#define SUN4I_CLK_CTL_CDR2(div) ((div) & SUN4I_CLK_CTL_CDR2_MASK)
+#define SUN4I_CLK_CTL_CDR1_MASK 0xf
+#define SUN4I_CLK_CTL_CDR1(div) (((div) & SUN4I_CLK_CTL_CDR1_MASK) << 8)
+#define SUN4I_CLK_CTL_DRS BIT(12)
+
+#define SUN4I_BURST_CNT_REG 0x20
+#define SUN4I_BURST_CNT(cnt) ((cnt) & 0xffffff)
+
+#define SUN4I_XMIT_CNT_REG 0x24
+#define SUN4I_XMIT_CNT(cnt) ((cnt) & 0xffffff)
+
+#define SUN4I_FIFO_STA_REG 0x28
+#define SUN4I_FIFO_STA_RF_CNT_MASK 0x7f
+#define SUN4I_FIFO_STA_RF_CNT_BITS 0
+#define SUN4I_FIFO_STA_TF_CNT_MASK 0x7f
+#define SUN4I_FIFO_STA_TF_CNT_BITS 16
+
+struct sun4i_spi {
+ struct spi_master *master;
+ void __iomem *base_addr;
+ struct clk *hclk;
+ struct clk *mclk;
+
+ struct completion done;
+
+ const u8 *tx_buf;
+ u8 *rx_buf;
+ int len;
+};
+
+static inline u32 sun4i_spi_read(struct sun4i_spi *sspi, u32 reg)
+{
+ return readl(sspi->base_addr + reg);
+}
+
+static inline void sun4i_spi_write(struct sun4i_spi *sspi, u32 reg, u32 value)
+{
+ writel(value, sspi->base_addr + reg);
+}
+
+static inline void sun4i_spi_drain_fifo(struct sun4i_spi *sspi, int len)
+{
+ u32 reg, cnt;
+ u8 byte;
+
+ /* See how much data is available */
+ reg = sun4i_spi_read(sspi, SUN4I_FIFO_STA_REG);
+ reg &= SUN4I_FIFO_STA_RF_CNT_MASK;
+ cnt = reg >> SUN4I_FIFO_STA_RF_CNT_BITS;
+
+ if (len > cnt)
+ len = cnt;
+
+ while (len--) {
+ byte = readb(sspi->base_addr + SUN4I_RXDATA_REG);
+ if (sspi->rx_buf)
+ *sspi->rx_buf++ = byte;
+ }
+}
+
+static inline void sun4i_spi_fill_fifo(struct sun4i_spi *sspi, int len)
+{
+ u8 byte;
+
+ if (len > sspi->len)
+ len = sspi->len;
+
+ while (len--) {
+ byte = sspi->tx_buf ? *sspi->tx_buf++ : 0;
+ writeb(byte, sspi->base_addr + SUN4I_TXDATA_REG);
+ sspi->len--;
+ }
+}
+
+static void sun4i_spi_set_cs(struct spi_device *spi, bool enable)
+{
+ struct sun4i_spi *sspi = spi_master_get_devdata(spi->master);
+ u32 reg;
+
+ reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
+
+ reg &= ~SUN4I_CTL_CS_MASK;
+ reg |= SUN4I_CTL_CS(spi->chip_select);
+
+ if (enable)
+ reg |= SUN4I_CTL_CS_LEVEL;
+ else
+ reg &= ~SUN4I_CTL_CS_LEVEL;
+
+ /*
+ * Even though this looks irrelevant since we are supposed to
+ * be controlling the chip select manually, this bit also
+ * controls the levels of the chip select for inactive
+ * devices.
+ *
+ * If we don't set it, the chip select level will go low by
+ * default when the device is idle, which is not really
+ * expected in the common case where the chip select is active
+ * low.
+ */
+ if (spi->mode & SPI_CS_HIGH)
+ reg &= ~SUN4I_CTL_CS_ACTIVE_LOW;
+ else
+ reg |= SUN4I_CTL_CS_ACTIVE_LOW;
+
+ sun4i_spi_write(sspi, SUN4I_CTL_REG, reg);
+}
+
+static int sun4i_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
+ unsigned int mclk_rate, div, timeout;
+ unsigned int tx_len = 0;
+ int ret = 0;
+ u32 reg;
+
+ /* We don't support transfer larger than the FIFO */
+ if (tfr->len > SUN4I_FIFO_DEPTH)
+ return -EINVAL;
+
+ reinit_completion(&sspi->done);
+ sspi->tx_buf = tfr->tx_buf;
+ sspi->rx_buf = tfr->rx_buf;
+ sspi->len = tfr->len;
+
+ /* Clear pending interrupts */
+ sun4i_spi_write(sspi, SUN4I_INT_STA_REG, ~0);
+
+
+ reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
+
+ /* Reset FIFOs */
+ sun4i_spi_write(sspi, SUN4I_CTL_REG,
+ reg | SUN4I_CTL_RF_RST | SUN4I_CTL_TF_RST);
+
+ /*
+ * Setup the transfer control register: Chip Select,
+ * polarities, etc.
+ */
+ if (spi->mode & SPI_CPOL)
+ reg |= SUN4I_CTL_CPOL;
+ else
+ reg &= ~SUN4I_CTL_CPOL;
+
+ if (spi->mode & SPI_CPHA)
+ reg |= SUN4I_CTL_CPHA;
+ else
+ reg &= ~SUN4I_CTL_CPHA;
+
+ if (spi->mode & SPI_LSB_FIRST)
+ reg |= SUN4I_CTL_LMTF;
+ else
+ reg &= ~SUN4I_CTL_LMTF;
+
+
+ /*
+ * If it's a TX only transfer, we don't want to fill the RX
+ * FIFO with bogus data
+ */
+ if (sspi->rx_buf)
+ reg &= ~SUN4I_CTL_DHB;
+ else
+ reg |= SUN4I_CTL_DHB;
+
+ /* We want to control the chip select manually */
+ reg |= SUN4I_CTL_CS_MANUAL;
+
+ sun4i_spi_write(sspi, SUN4I_CTL_REG, reg);
+
+ /* Ensure that we have a parent clock fast enough */
+ mclk_rate = clk_get_rate(sspi->mclk);
+ if (mclk_rate < (2 * spi->max_speed_hz)) {
+ clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+ mclk_rate = clk_get_rate(sspi->mclk);
+ }
+
+ /*
+ * Setup clock divider.
+ *
+ * We have two choices there. Either we can use the clock
+ * divide rate 1, which is calculated thanks to this formula:
+ * SPI_CLK = MOD_CLK / (2 ^ (cdr + 1))
+ * Or we can use CDR2, which is calculated with the formula:
+ * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
+ * Wether we use the former or the latter is set through the
+ * DRS bit.
+ *
+ * First try CDR2, and if we can't reach the expected
+ * frequency, fall back to CDR1.
+ */
+ div = mclk_rate / (2 * spi->max_speed_hz);
+ if (div <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) {
+ if (div > 0)
+ div--;
+
+ reg = SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS;
+ } else {
+ div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+ reg = SUN4I_CLK_CTL_CDR1(div);
+ }
+
+ sun4i_spi_write(sspi, SUN4I_CLK_CTL_REG, reg);
+
+ /* Setup the transfer now... */
+ if (sspi->tx_buf)
+ tx_len = tfr->len;
+
+ /* Setup the counters */
+ sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len));
+ sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len));
+
+ /* Fill the TX FIFO */
+ sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
+
+ /* Enable the interrupts */
+ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC);
+
+ /* Start the transfer */
+ reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
+ sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
+
+ timeout = wait_for_completion_timeout(&sspi->done,
+ msecs_to_jiffies(1000));
+ if (!timeout) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
+
+out:
+ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
+
+ return ret;
+}
+
+static irqreturn_t sun4i_spi_handler(int irq, void *dev_id)
+{
+ struct sun4i_spi *sspi = dev_id;
+ u32 status = sun4i_spi_read(sspi, SUN4I_INT_STA_REG);
+
+ /* Transfer complete */
+ if (status & SUN4I_INT_CTL_TC) {
+ sun4i_spi_write(sspi, SUN4I_INT_STA_REG, SUN4I_INT_CTL_TC);
+ complete(&sspi->done);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int sun4i_spi_runtime_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
+ int ret;
+
+ ret = clk_prepare_enable(sspi->hclk);
+ if (ret) {
+ dev_err(dev, "Couldn't enable AHB clock\n");
+ goto out;
+ }
+
+ ret = clk_prepare_enable(sspi->mclk);
+ if (ret) {
+ dev_err(dev, "Couldn't enable module clock\n");
+ goto err;
+ }
+
+ sun4i_spi_write(sspi, SUN4I_CTL_REG,
+ SUN4I_CTL_ENABLE | SUN4I_CTL_MASTER | SUN4I_CTL_TP);
+
+ return 0;
+
+err:
+ clk_disable_unprepare(sspi->hclk);
+out:
+ return ret;
+}
+
+static int sun4i_spi_runtime_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
+
+ clk_disable_unprepare(sspi->mclk);
+ clk_disable_unprepare(sspi->hclk);
+
+ return 0;
+}
+
+static int sun4i_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct sun4i_spi *sspi;
+ struct resource *res;
+ int ret = 0, irq;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct sun4i_spi));
+ if (!master) {
+ dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, master);
+ sspi = spi_master_get_devdata(master);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sspi->base_addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sspi->base_addr)) {
+ ret = PTR_ERR(sspi->base_addr);
+ goto err_free_master;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "No spi IRQ specified\n");
+ ret = -ENXIO;
+ goto err_free_master;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, sun4i_spi_handler,
+ 0, "sun4i-spi", sspi);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot request IRQ\n");
+ goto err_free_master;
+ }
+
+ sspi->master = master;
+ master->set_cs = sun4i_spi_set_cs;
+ master->transfer_one = sun4i_spi_transfer_one;
+ master->num_chipselect = 4;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->dev.of_node = pdev->dev.of_node;
+ master->auto_runtime_pm = true;
+
+ sspi->hclk = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(sspi->hclk)) {
+ dev_err(&pdev->dev, "Unable to acquire AHB clock\n");
+ ret = PTR_ERR(sspi->hclk);
+ goto err_free_master;
+ }
+
+ sspi->mclk = devm_clk_get(&pdev->dev, "mod");
+ if (IS_ERR(sspi->mclk)) {
+ dev_err(&pdev->dev, "Unable to acquire module clock\n");
+ ret = PTR_ERR(sspi->mclk);
+ goto err_free_master;
+ }
+
+ init_completion(&sspi->done);
+
+ /*
+ * This wake-up/shutdown pattern is to be able to have the
+ * device woken up, even if runtime_pm is disabled
+ */
+ ret = sun4i_spi_runtime_resume(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't resume the device\n");
+ goto err_free_master;
+ }
+
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_idle(&pdev->dev);
+
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot register SPI master\n");
+ goto err_pm_disable;
+ }
+
+ return 0;
+
+err_pm_disable:
+ pm_runtime_disable(&pdev->dev);
+ sun4i_spi_runtime_suspend(&pdev->dev);
+err_free_master:
+ spi_master_put(master);
+ return ret;
+}
+
+static int sun4i_spi_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id sun4i_spi_match[] = {
+ { .compatible = "allwinner,sun4i-a10-spi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sun4i_spi_match);
+
+static const struct dev_pm_ops sun4i_spi_pm_ops = {
+ .runtime_resume = sun4i_spi_runtime_resume,
+ .runtime_suspend = sun4i_spi_runtime_suspend,
+};
+
+static struct platform_driver sun4i_spi_driver = {
+ .probe = sun4i_spi_probe,
+ .remove = sun4i_spi_remove,
+ .driver = {
+ .name = "sun4i-spi",
+ .owner = THIS_MODULE,
+ .of_match_table = sun4i_spi_match,
+ .pm = &sun4i_spi_pm_ops,
+ },
+};
+module_platform_driver(sun4i_spi_driver);
+
+MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A1X/A20 SPI controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
new file mode 100644
index 000000000000..b3e3498a7e6f
--- /dev/null
+++ b/drivers/spi/spi-sun6i.c
@@ -0,0 +1,484 @@
+/*
+ * Copyright (C) 2012 - 2014 Allwinner Tech
+ * Pan Nan <pannan@allwinnertech.com>
+ *
+ * Copyright (C) 2014 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/workqueue.h>
+
+#include <linux/spi/spi.h>
+
+#define SUN6I_FIFO_DEPTH 128
+
+#define SUN6I_GBL_CTL_REG 0x04
+#define SUN6I_GBL_CTL_BUS_ENABLE BIT(0)
+#define SUN6I_GBL_CTL_MASTER BIT(1)
+#define SUN6I_GBL_CTL_TP BIT(7)
+#define SUN6I_GBL_CTL_RST BIT(31)
+
+#define SUN6I_TFR_CTL_REG 0x08
+#define SUN6I_TFR_CTL_CPHA BIT(0)
+#define SUN6I_TFR_CTL_CPOL BIT(1)
+#define SUN6I_TFR_CTL_SPOL BIT(2)
+#define SUN6I_TFR_CTL_CS_MASK 0x30
+#define SUN6I_TFR_CTL_CS(cs) (((cs) << 4) & SUN6I_TFR_CTL_CS_MASK)
+#define SUN6I_TFR_CTL_CS_MANUAL BIT(6)
+#define SUN6I_TFR_CTL_CS_LEVEL BIT(7)
+#define SUN6I_TFR_CTL_DHB BIT(8)
+#define SUN6I_TFR_CTL_FBS BIT(12)
+#define SUN6I_TFR_CTL_XCH BIT(31)
+
+#define SUN6I_INT_CTL_REG 0x10
+#define SUN6I_INT_CTL_RF_OVF BIT(8)
+#define SUN6I_INT_CTL_TC BIT(12)
+
+#define SUN6I_INT_STA_REG 0x14
+
+#define SUN6I_FIFO_CTL_REG 0x18
+#define SUN6I_FIFO_CTL_RF_RST BIT(15)
+#define SUN6I_FIFO_CTL_TF_RST BIT(31)
+
+#define SUN6I_FIFO_STA_REG 0x1c
+#define SUN6I_FIFO_STA_RF_CNT_MASK 0x7f
+#define SUN6I_FIFO_STA_RF_CNT_BITS 0
+#define SUN6I_FIFO_STA_TF_CNT_MASK 0x7f
+#define SUN6I_FIFO_STA_TF_CNT_BITS 16
+
+#define SUN6I_CLK_CTL_REG 0x24
+#define SUN6I_CLK_CTL_CDR2_MASK 0xff
+#define SUN6I_CLK_CTL_CDR2(div) (((div) & SUN6I_CLK_CTL_CDR2_MASK) << 0)
+#define SUN6I_CLK_CTL_CDR1_MASK 0xf
+#define SUN6I_CLK_CTL_CDR1(div) (((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8)
+#define SUN6I_CLK_CTL_DRS BIT(12)
+
+#define SUN6I_BURST_CNT_REG 0x30
+#define SUN6I_BURST_CNT(cnt) ((cnt) & 0xffffff)
+
+#define SUN6I_XMIT_CNT_REG 0x34
+#define SUN6I_XMIT_CNT(cnt) ((cnt) & 0xffffff)
+
+#define SUN6I_BURST_CTL_CNT_REG 0x38
+#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & 0xffffff)
+
+#define SUN6I_TXDATA_REG 0x200
+#define SUN6I_RXDATA_REG 0x300
+
+struct sun6i_spi {
+ struct spi_master *master;
+ void __iomem *base_addr;
+ struct clk *hclk;
+ struct clk *mclk;
+ struct reset_control *rstc;
+
+ struct completion done;
+
+ const u8 *tx_buf;
+ u8 *rx_buf;
+ int len;
+};
+
+static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
+{
+ return readl(sspi->base_addr + reg);
+}
+
+static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value)
+{
+ writel(value, sspi->base_addr + reg);
+}
+
+static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
+{
+ u32 reg, cnt;
+ u8 byte;
+
+ /* See how much data is available */
+ reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG);
+ reg &= SUN6I_FIFO_STA_RF_CNT_MASK;
+ cnt = reg >> SUN6I_FIFO_STA_RF_CNT_BITS;
+
+ if (len > cnt)
+ len = cnt;
+
+ while (len--) {
+ byte = readb(sspi->base_addr + SUN6I_RXDATA_REG);
+ if (sspi->rx_buf)
+ *sspi->rx_buf++ = byte;
+ }
+}
+
+static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len)
+{
+ u8 byte;
+
+ if (len > sspi->len)
+ len = sspi->len;
+
+ while (len--) {
+ byte = sspi->tx_buf ? *sspi->tx_buf++ : 0;
+ writeb(byte, sspi->base_addr + SUN6I_TXDATA_REG);
+ sspi->len--;
+ }
+}
+
+static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
+{
+ struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
+ u32 reg;
+
+ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
+ reg &= ~SUN6I_TFR_CTL_CS_MASK;
+ reg |= SUN6I_TFR_CTL_CS(spi->chip_select);
+
+ if (enable)
+ reg |= SUN6I_TFR_CTL_CS_LEVEL;
+ else
+ reg &= ~SUN6I_TFR_CTL_CS_LEVEL;
+
+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
+}
+
+
+static int sun6i_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct sun6i_spi *sspi = spi_master_get_devdata(master);
+ unsigned int mclk_rate, div, timeout;
+ unsigned int tx_len = 0;
+ int ret = 0;
+ u32 reg;
+
+ /* We don't support transfer larger than the FIFO */
+ if (tfr->len > SUN6I_FIFO_DEPTH)
+ return -EINVAL;
+
+ reinit_completion(&sspi->done);
+ sspi->tx_buf = tfr->tx_buf;
+ sspi->rx_buf = tfr->rx_buf;
+ sspi->len = tfr->len;
+
+ /* Clear pending interrupts */
+ sun6i_spi_write(sspi, SUN6I_INT_STA_REG, ~0);
+
+ /* Reset FIFO */
+ sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG,
+ SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST);
+
+ /*
+ * Setup the transfer control register: Chip Select,
+ * polarities, etc.
+ */
+ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
+
+ if (spi->mode & SPI_CPOL)
+ reg |= SUN6I_TFR_CTL_CPOL;
+ else
+ reg &= ~SUN6I_TFR_CTL_CPOL;
+
+ if (spi->mode & SPI_CPHA)
+ reg |= SUN6I_TFR_CTL_CPHA;
+ else
+ reg &= ~SUN6I_TFR_CTL_CPHA;
+
+ if (spi->mode & SPI_LSB_FIRST)
+ reg |= SUN6I_TFR_CTL_FBS;
+ else
+ reg &= ~SUN6I_TFR_CTL_FBS;
+
+ /*
+ * If it's a TX only transfer, we don't want to fill the RX
+ * FIFO with bogus data
+ */
+ if (sspi->rx_buf)
+ reg &= ~SUN6I_TFR_CTL_DHB;
+ else
+ reg |= SUN6I_TFR_CTL_DHB;
+
+ /* We want to control the chip select manually */
+ reg |= SUN6I_TFR_CTL_CS_MANUAL;
+
+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
+
+ /* Ensure that we have a parent clock fast enough */
+ mclk_rate = clk_get_rate(sspi->mclk);
+ if (mclk_rate < (2 * spi->max_speed_hz)) {
+ clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+ mclk_rate = clk_get_rate(sspi->mclk);
+ }
+
+ /*
+ * Setup clock divider.
+ *
+ * We have two choices there. Either we can use the clock
+ * divide rate 1, which is calculated thanks to this formula:
+ * SPI_CLK = MOD_CLK / (2 ^ cdr)
+ * Or we can use CDR2, which is calculated with the formula:
+ * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
+ * Wether we use the former or the latter is set through the
+ * DRS bit.
+ *
+ * First try CDR2, and if we can't reach the expected
+ * frequency, fall back to CDR1.
+ */
+ div = mclk_rate / (2 * spi->max_speed_hz);
+ if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
+ if (div > 0)
+ div--;
+
+ reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
+ } else {
+ div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+ reg = SUN6I_CLK_CTL_CDR1(div);
+ }
+
+ sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
+
+ /* Setup the transfer now... */
+ if (sspi->tx_buf)
+ tx_len = tfr->len;
+
+ /* Setup the counters */
+ sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len));
+ sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len));
+ sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG,
+ SUN6I_BURST_CTL_CNT_STC(tx_len));
+
+ /* Fill the TX FIFO */
+ sun6i_spi_fill_fifo(sspi, SUN6I_FIFO_DEPTH);
+
+ /* Enable the interrupts */
+ sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);
+
+ /* Start the transfer */
+ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);
+
+ timeout = wait_for_completion_timeout(&sspi->done,
+ msecs_to_jiffies(1000));
+ if (!timeout) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH);
+
+out:
+ sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
+
+ return ret;
+}
+
+static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
+{
+ struct sun6i_spi *sspi = dev_id;
+ u32 status = sun6i_spi_read(sspi, SUN6I_INT_STA_REG);
+
+ /* Transfer complete */
+ if (status & SUN6I_INT_CTL_TC) {
+ sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
+ complete(&sspi->done);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int sun6i_spi_runtime_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct sun6i_spi *sspi = spi_master_get_devdata(master);
+ int ret;
+
+ ret = clk_prepare_enable(sspi->hclk);
+ if (ret) {
+ dev_err(dev, "Couldn't enable AHB clock\n");
+ goto out;
+ }
+
+ ret = clk_prepare_enable(sspi->mclk);
+ if (ret) {
+ dev_err(dev, "Couldn't enable module clock\n");
+ goto err;
+ }
+
+ ret = reset_control_deassert(sspi->rstc);
+ if (ret) {
+ dev_err(dev, "Couldn't deassert the device from reset\n");
+ goto err2;
+ }
+
+ sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
+ SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
+
+ return 0;
+
+err2:
+ clk_disable_unprepare(sspi->mclk);
+err:
+ clk_disable_unprepare(sspi->hclk);
+out:
+ return ret;
+}
+
+static int sun6i_spi_runtime_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct sun6i_spi *sspi = spi_master_get_devdata(master);
+
+ reset_control_assert(sspi->rstc);
+ clk_disable_unprepare(sspi->mclk);
+ clk_disable_unprepare(sspi->hclk);
+
+ return 0;
+}
+
+static int sun6i_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct sun6i_spi *sspi;
+ struct resource *res;
+ int ret = 0, irq;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct sun6i_spi));
+ if (!master) {
+ dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, master);
+ sspi = spi_master_get_devdata(master);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sspi->base_addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sspi->base_addr)) {
+ ret = PTR_ERR(sspi->base_addr);
+ goto err_free_master;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "No spi IRQ specified\n");
+ ret = -ENXIO;
+ goto err_free_master;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, sun6i_spi_handler,
+ 0, "sun6i-spi", sspi);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot request IRQ\n");
+ goto err_free_master;
+ }
+
+ sspi->master = master;
+ master->set_cs = sun6i_spi_set_cs;
+ master->transfer_one = sun6i_spi_transfer_one;
+ master->num_chipselect = 4;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->dev.of_node = pdev->dev.of_node;
+ master->auto_runtime_pm = true;
+
+ sspi->hclk = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(sspi->hclk)) {
+ dev_err(&pdev->dev, "Unable to acquire AHB clock\n");
+ ret = PTR_ERR(sspi->hclk);
+ goto err_free_master;
+ }
+
+ sspi->mclk = devm_clk_get(&pdev->dev, "mod");
+ if (IS_ERR(sspi->mclk)) {
+ dev_err(&pdev->dev, "Unable to acquire module clock\n");
+ ret = PTR_ERR(sspi->mclk);
+ goto err_free_master;
+ }
+
+ init_completion(&sspi->done);
+
+ sspi->rstc = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(sspi->rstc)) {
+ dev_err(&pdev->dev, "Couldn't get reset controller\n");
+ ret = PTR_ERR(sspi->rstc);
+ goto err_free_master;
+ }
+
+ /*
+ * This wake-up/shutdown pattern is to be able to have the
+ * device woken up, even if runtime_pm is disabled
+ */
+ ret = sun6i_spi_runtime_resume(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't resume the device\n");
+ goto err_free_master;
+ }
+
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_idle(&pdev->dev);
+
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot register SPI master\n");
+ goto err_pm_disable;
+ }
+
+ return 0;
+
+err_pm_disable:
+ pm_runtime_disable(&pdev->dev);
+ sun6i_spi_runtime_suspend(&pdev->dev);
+err_free_master:
+ spi_master_put(master);
+ return ret;
+}
+
+static int sun6i_spi_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id sun6i_spi_match[] = {
+ { .compatible = "allwinner,sun6i-a31-spi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sun6i_spi_match);
+
+static const struct dev_pm_ops sun6i_spi_pm_ops = {
+ .runtime_resume = sun6i_spi_runtime_resume,
+ .runtime_suspend = sun6i_spi_runtime_suspend,
+};
+
+static struct platform_driver sun6i_spi_driver = {
+ .probe = sun6i_spi_probe,
+ .remove = sun6i_spi_remove,
+ .driver = {
+ .name = "sun6i-spi",
+ .owner = THIS_MODULE,
+ .of_match_table = sun6i_spi_match,
+ .pm = &sun6i_spi_pm_ops,
+ },
+};
+module_platform_driver(sun6i_spi_driver);
+
+MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A31 SPI controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index 6be661e4c6e1..400649595505 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -846,8 +846,8 @@ complete_xfer:
SPI_COMMAND1);
tegra_spi_transfer_delay(xfer->delay_usecs);
goto exit;
- } else if (msg->transfers.prev == &xfer->transfer_list) {
- /* This is the last transfer in message */
+ } else if (list_is_last(&xfer->transfer_list,
+ &msg->transfers)) {
if (xfer->cs_change)
tspi->cs_control = spi;
else {
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 49ddfc7f12b1..6c211d1910b0 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -461,7 +461,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
if (res_mmap == NULL) {
dev_err(&pdev->dev,
"memory mapped resource not required\n");
- return -ENODEV;
}
}
diff --git a/drivers/spi/spi-ti-ssp.c b/drivers/spi/spi-ti-ssp.c
deleted file mode 100644
index 7d20e121e4c1..000000000000
--- a/drivers/spi/spi-ti-ssp.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * Sequencer Serial Port (SSP) based SPI master driver
- *
- * Copyright (C) 2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/ti_ssp.h>
-
-#define MODE_BITS (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH)
-
-struct ti_ssp_spi {
- struct spi_master *master;
- struct device *dev;
- spinlock_t lock;
- struct list_head msg_queue;
- struct completion complete;
- bool shutdown;
- struct workqueue_struct *workqueue;
- struct work_struct work;
- u8 mode, bpw;
- int cs_active;
- u32 pc_en, pc_dis, pc_wr, pc_rd;
- void (*select)(int cs);
-};
-
-static u32 ti_ssp_spi_rx(struct ti_ssp_spi *hw)
-{
- u32 ret;
-
- ti_ssp_run(hw->dev, hw->pc_rd, 0, &ret);
- return ret;
-}
-
-static void ti_ssp_spi_tx(struct ti_ssp_spi *hw, u32 data)
-{
- ti_ssp_run(hw->dev, hw->pc_wr, data << (32 - hw->bpw), NULL);
-}
-
-static int ti_ssp_spi_txrx(struct ti_ssp_spi *hw, struct spi_message *msg,
- struct spi_transfer *t)
-{
- int count;
-
- if (hw->bpw <= 8) {
- u8 *rx = t->rx_buf;
- const u8 *tx = t->tx_buf;
-
- for (count = 0; count < t->len; count += 1) {
- if (t->tx_buf)
- ti_ssp_spi_tx(hw, *tx++);
- if (t->rx_buf)
- *rx++ = ti_ssp_spi_rx(hw);
- }
- } else if (hw->bpw <= 16) {
- u16 *rx = t->rx_buf;
- const u16 *tx = t->tx_buf;
-
- for (count = 0; count < t->len; count += 2) {
- if (t->tx_buf)
- ti_ssp_spi_tx(hw, *tx++);
- if (t->rx_buf)
- *rx++ = ti_ssp_spi_rx(hw);
- }
- } else {
- u32 *rx = t->rx_buf;
- const u32 *tx = t->tx_buf;
-
- for (count = 0; count < t->len; count += 4) {
- if (t->tx_buf)
- ti_ssp_spi_tx(hw, *tx++);
- if (t->rx_buf)
- *rx++ = ti_ssp_spi_rx(hw);
- }
- }
-
- msg->actual_length += count; /* bytes transferred */
-
- dev_dbg(&msg->spi->dev, "xfer %s%s, %d bytes, %d bpw, count %d%s\n",
- t->tx_buf ? "tx" : "", t->rx_buf ? "rx" : "", t->len,
- hw->bpw, count, (count < t->len) ? " (under)" : "");
-
- return (count < t->len) ? -EIO : 0; /* left over data */
-}
-
-static void ti_ssp_spi_chip_select(struct ti_ssp_spi *hw, int cs_active)
-{
- cs_active = !!cs_active;
- if (cs_active == hw->cs_active)
- return;
- ti_ssp_run(hw->dev, cs_active ? hw->pc_en : hw->pc_dis, 0, NULL);
- hw->cs_active = cs_active;
-}
-
-#define __SHIFT_OUT(bits) (SSP_OPCODE_SHIFT | SSP_OUT_MODE | \
- cs_en | clk | SSP_COUNT((bits) * 2 - 1))
-#define __SHIFT_IN(bits) (SSP_OPCODE_SHIFT | SSP_IN_MODE | \
- cs_en | clk | SSP_COUNT((bits) * 2 - 1))
-
-static int ti_ssp_spi_setup_transfer(struct ti_ssp_spi *hw, u8 bpw, u8 mode)
-{
- int error, idx = 0;
- u32 seqram[16];
- u32 cs_en, cs_dis, clk;
- u32 topbits, botbits;
-
- mode &= MODE_BITS;
- if (mode == hw->mode && bpw == hw->bpw)
- return 0;
-
- cs_en = (mode & SPI_CS_HIGH) ? SSP_CS_HIGH : SSP_CS_LOW;
- cs_dis = (mode & SPI_CS_HIGH) ? SSP_CS_LOW : SSP_CS_HIGH;
- clk = (mode & SPI_CPOL) ? SSP_CLK_HIGH : SSP_CLK_LOW;
-
- /* Construct instructions */
-
- /* Disable Chip Select */
- hw->pc_dis = idx;
- seqram[idx++] = SSP_OPCODE_DIRECT | SSP_OUT_MODE | cs_dis | clk;
- seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_dis | clk;
-
- /* Enable Chip Select */
- hw->pc_en = idx;
- seqram[idx++] = SSP_OPCODE_DIRECT | SSP_OUT_MODE | cs_en | clk;
- seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk;
-
- /* Reads and writes need to be split for bpw > 16 */
- topbits = (bpw > 16) ? 16 : bpw;
- botbits = bpw - topbits;
-
- /* Write */
- hw->pc_wr = idx;
- seqram[idx++] = __SHIFT_OUT(topbits) | SSP_ADDR_REG;
- if (botbits)
- seqram[idx++] = __SHIFT_OUT(botbits) | SSP_DATA_REG;
- seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk;
-
- /* Read */
- hw->pc_rd = idx;
- if (botbits)
- seqram[idx++] = __SHIFT_IN(botbits) | SSP_ADDR_REG;
- seqram[idx++] = __SHIFT_IN(topbits) | SSP_DATA_REG;
- seqram[idx++] = SSP_OPCODE_STOP | SSP_OUT_MODE | cs_en | clk;
-
- error = ti_ssp_load(hw->dev, 0, seqram, idx);
- if (error < 0)
- return error;
-
- error = ti_ssp_set_mode(hw->dev, ((mode & SPI_CPHA) ?
- 0 : SSP_EARLY_DIN));
- if (error < 0)
- return error;
-
- hw->bpw = bpw;
- hw->mode = mode;
-
- return error;
-}
-
-static void ti_ssp_spi_work(struct work_struct *work)
-{
- struct ti_ssp_spi *hw = container_of(work, struct ti_ssp_spi, work);
-
- spin_lock(&hw->lock);
-
- while (!list_empty(&hw->msg_queue)) {
- struct spi_message *m;
- struct spi_device *spi;
- struct spi_transfer *t = NULL;
- int status = 0;
-
- m = container_of(hw->msg_queue.next, struct spi_message,
- queue);
-
- list_del_init(&m->queue);
-
- spin_unlock(&hw->lock);
-
- spi = m->spi;
-
- if (hw->select)
- hw->select(spi->chip_select);
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- int bpw = spi->bits_per_word;
- int xfer_status;
-
- if (t->bits_per_word)
- bpw = t->bits_per_word;
-
- if (ti_ssp_spi_setup_transfer(hw, bpw, spi->mode) < 0)
- break;
-
- ti_ssp_spi_chip_select(hw, 1);
-
- xfer_status = ti_ssp_spi_txrx(hw, m, t);
- if (xfer_status < 0)
- status = xfer_status;
-
- if (t->delay_usecs)
- udelay(t->delay_usecs);
-
- if (t->cs_change)
- ti_ssp_spi_chip_select(hw, 0);
- }
-
- ti_ssp_spi_chip_select(hw, 0);
- m->status = status;
- m->complete(m->context);
-
- spin_lock(&hw->lock);
- }
-
- if (hw->shutdown)
- complete(&hw->complete);
-
- spin_unlock(&hw->lock);
-}
-
-static int ti_ssp_spi_transfer(struct spi_device *spi, struct spi_message *m)
-{
- struct ti_ssp_spi *hw;
- struct spi_transfer *t;
- int error = 0;
-
- m->actual_length = 0;
- m->status = -EINPROGRESS;
-
- hw = spi_master_get_devdata(spi->master);
-
- if (list_empty(&m->transfers) || !m->complete)
- return -EINVAL;
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- if (t->len && !(t->rx_buf || t->tx_buf)) {
- dev_err(&spi->dev, "invalid xfer, no buffer\n");
- return -EINVAL;
- }
-
- if (t->len && t->rx_buf && t->tx_buf) {
- dev_err(&spi->dev, "invalid xfer, full duplex\n");
- return -EINVAL;
- }
- }
-
- spin_lock(&hw->lock);
- if (hw->shutdown) {
- error = -ESHUTDOWN;
- goto error_unlock;
- }
- list_add_tail(&m->queue, &hw->msg_queue);
- queue_work(hw->workqueue, &hw->work);
-error_unlock:
- spin_unlock(&hw->lock);
- return error;
-}
-
-static int ti_ssp_spi_probe(struct platform_device *pdev)
-{
- const struct ti_ssp_spi_data *pdata;
- struct ti_ssp_spi *hw;
- struct spi_master *master;
- struct device *dev = &pdev->dev;
- int error = 0;
-
- pdata = dev_get_platdata(dev);
- if (!pdata) {
- dev_err(dev, "platform data not found\n");
- return -EINVAL;
- }
-
- master = spi_alloc_master(dev, sizeof(struct ti_ssp_spi));
- if (!master) {
- dev_err(dev, "cannot allocate SPI master\n");
- return -ENOMEM;
- }
-
- hw = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, hw);
-
- hw->master = master;
- hw->dev = dev;
- hw->select = pdata->select;
-
- spin_lock_init(&hw->lock);
- init_completion(&hw->complete);
- INIT_LIST_HEAD(&hw->msg_queue);
- INIT_WORK(&hw->work, ti_ssp_spi_work);
-
- hw->workqueue = create_singlethread_workqueue(dev_name(dev));
- if (!hw->workqueue) {
- error = -ENOMEM;
- dev_err(dev, "work queue creation failed\n");
- goto error_wq;
- }
-
- error = ti_ssp_set_iosel(hw->dev, pdata->iosel);
- if (error < 0) {
- dev_err(dev, "io setup failed\n");
- goto error_iosel;
- }
-
- master->bus_num = pdev->id;
- master->num_chipselect = pdata->num_cs;
- master->mode_bits = MODE_BITS;
- master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
- master->flags = SPI_MASTER_HALF_DUPLEX;
- master->transfer = ti_ssp_spi_transfer;
-
- error = spi_register_master(master);
- if (error) {
- dev_err(dev, "master registration failed\n");
- goto error_reg;
- }
-
- return 0;
-
-error_reg:
-error_iosel:
- destroy_workqueue(hw->workqueue);
-error_wq:
- spi_master_put(master);
- return error;
-}
-
-static int ti_ssp_spi_remove(struct platform_device *pdev)
-{
- struct ti_ssp_spi *hw = platform_get_drvdata(pdev);
- int error;
-
- hw->shutdown = 1;
- while (!list_empty(&hw->msg_queue)) {
- error = wait_for_completion_interruptible(&hw->complete);
- if (error < 0) {
- hw->shutdown = 0;
- return error;
- }
- }
- destroy_workqueue(hw->workqueue);
- spi_unregister_master(hw->master);
-
- return 0;
-}
-
-static struct platform_driver ti_ssp_spi_driver = {
- .probe = ti_ssp_spi_probe,
- .remove = ti_ssp_spi_remove,
- .driver = {
- .name = "ti-ssp-spi",
- .owner = THIS_MODULE,
- },
-};
-module_platform_driver(ti_ssp_spi_driver);
-
-MODULE_DESCRIPTION("SSP SPI Master");
-MODULE_AUTHOR("Cyril Chemparathy");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ti-ssp-spi");
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 88eb57e858b3..f406b30af961 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -332,7 +332,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
data->transfer_active = false;
wake_up(&data->wait);
} else {
- dev_err(&data->master->dev,
+ dev_vdbg(&data->master->dev,
"%s : Transfer is not completed",
__func__);
}
@@ -464,20 +464,6 @@ static void pch_spi_reset(struct spi_master *master)
pch_spi_writereg(master, PCH_SRST, 0x0);
}
-static int pch_spi_setup(struct spi_device *pspi)
-{
- /* Check baud rate setting */
- /* if baud rate of chip is greater than
- max we can support,return error */
- if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE)
- pspi->max_speed_hz = PCH_MAX_BAUDRATE;
-
- dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__,
- (pspi->mode) & (SPI_CPOL | SPI_CPHA));
-
- return 0;
-}
-
static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
{
@@ -486,23 +472,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
int retval;
unsigned long flags;
- /* validate spi message and baud rate */
- if (unlikely(list_empty(&pmsg->transfers) == 1)) {
- dev_err(&pspi->dev, "%s list empty\n", __func__);
- retval = -EINVAL;
- goto err_out;
- }
-
- if (unlikely(pspi->max_speed_hz == 0)) {
- dev_err(&pspi->dev, "%s pch_spi_transfer maxspeed=%d\n",
- __func__, pspi->max_speed_hz);
- retval = -EINVAL;
- goto err_out;
- }
-
- dev_dbg(&pspi->dev,
- "%s Transfer List not empty. Transfer Speed is set.\n", __func__);
-
spin_lock_irqsave(&data->lock, flags);
/* validate Tx/Rx buffers and Transfer length */
list_for_each_entry(transfer, &pmsg->transfers, transfer_list) {
@@ -523,10 +492,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
dev_dbg(&pspi->dev,
"%s Tx/Rx buffer valid. Transfer length valid\n",
__func__);
-
- /* if baud rate has been specified validate the same */
- if (transfer->speed_hz > PCH_MAX_BAUDRATE)
- transfer->speed_hz = PCH_MAX_BAUDRATE;
}
spin_unlock_irqrestore(&data->lock, flags);
@@ -1151,8 +1116,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
dma->nent = num;
dma->desc_tx = desc_tx;
- dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing "
- "0x2 to SSNXCR\n", __func__);
+ dev_dbg(&data->master->dev, "%s:Pulling down SSN low - writing 0x2 to SSNXCR\n", __func__);
spin_lock_irqsave(&data->lock, flags);
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
@@ -1418,10 +1382,10 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev)
/* initialize members of SPI master */
master->num_chipselect = PCH_MAX_CS;
- master->setup = pch_spi_setup;
master->transfer = pch_spi_transfer;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+ master->max_speed_hz = PCH_MAX_BAUDRATE;
data->board_dat = board_dat;
data->plat_dev = plat_dev;
@@ -1605,8 +1569,7 @@ static struct platform_driver pch_spi_pd_driver = {
.resume = pch_spi_pd_resume
};
-static int pch_spi_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
+static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct pch_spi_board_data *board_dat;
struct platform_device *pd_dev = NULL;
@@ -1676,6 +1639,8 @@ static int pch_spi_probe(struct pci_dev *pdev,
return 0;
err_platform_device:
+ while (--i >= 0)
+ platform_device_unregister(pd_dev_save->pd_save[i]);
pci_disable_device(pdev);
pci_enable_device:
pci_release_regions(pdev);
diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c
index 6191ced514b2..820b499816f8 100644
--- a/drivers/spi/spi-txx9.c
+++ b/drivers/spi/spi-txx9.c
@@ -80,7 +80,6 @@ struct txx9spi {
void __iomem *membase;
int baseclk;
struct clk *clk;
- u32 max_speed_hz, min_speed_hz;
int last_chipselect;
int last_chipselect_val;
};
@@ -117,9 +116,7 @@ static int txx9spi_setup(struct spi_device *spi)
{
struct txx9spi *c = spi_master_get_devdata(spi->master);
- if (!spi->max_speed_hz
- || spi->max_speed_hz > c->max_speed_hz
- || spi->max_speed_hz < c->min_speed_hz)
+ if (!spi->max_speed_hz)
return -EINVAL;
if (gpio_direction_output(spi->chip_select,
@@ -309,15 +306,8 @@ static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
/* check each transfer's parameters */
list_for_each_entry(t, &m->transfers, transfer_list) {
- u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
- u8 bits_per_word = t->bits_per_word;
-
if (!t->tx_buf && !t->rx_buf && t->len)
return -EINVAL;
- if (t->len & ((bits_per_word >> 3) - 1))
- return -EINVAL;
- if (speed_hz < c->min_speed_hz || speed_hz > c->max_speed_hz)
- return -EINVAL;
}
spin_lock_irqsave(&c->lock, flags);
@@ -360,17 +350,12 @@ static int txx9spi_probe(struct platform_device *dev)
goto exit;
}
c->baseclk = clk_get_rate(c->clk);
- c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1);
- c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1);
+ master->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1);
+ master->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1);
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!res)
- goto exit_busy;
- if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res),
- "spi_txx9"))
- goto exit_busy;
- c->membase = devm_ioremap(&dev->dev, res->start, resource_size(res));
- if (!c->membase)
+ c->membase = devm_ioremap_resource(&dev->dev, res);
+ if (IS_ERR(c->membase))
goto exit_busy;
/* enter config mode */
diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c
index 350a76b7e8d4..bb478dccf1d8 100644
--- a/drivers/spi/spi-xcomm.c
+++ b/drivers/spi/spi-xcomm.c
@@ -73,15 +73,13 @@ static void spi_xcomm_chipselect(struct spi_xcomm *spi_xcomm,
static int spi_xcomm_setup_transfer(struct spi_xcomm *spi_xcomm,
struct spi_device *spi, struct spi_transfer *t, unsigned int *settings)
{
- unsigned int speed;
-
if (t->len > 62)
return -EINVAL;
- speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
+ if (t->speed_hz != spi_xcomm->current_speed) {
+ unsigned int divider;
- if (speed != spi_xcomm->current_speed) {
- unsigned int divider = DIV_ROUND_UP(SPI_XCOMM_CLOCK, speed);
+ divider = DIV_ROUND_UP(SPI_XCOMM_CLOCK, t->speed_hz);
if (divider >= 64)
*settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_64;
else if (divider >= 16)
@@ -89,7 +87,7 @@ static int spi_xcomm_setup_transfer(struct spi_xcomm *spi_xcomm,
else
*settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_4;
- spi_xcomm->current_speed = speed;
+ spi_xcomm->current_speed = t->speed_hz;
}
if (spi->mode & SPI_CPOL)
@@ -147,8 +145,6 @@ static int spi_xcomm_transfer_one(struct spi_master *master,
int status = 0;
bool is_last;
- is_first = true;
-
spi_xcomm_chipselect(spi_xcomm, spi, true);
list_for_each_entry(t, &msg->transfers, transfer_list) {
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ffc1a2ebc4ca..4eb9bf02996c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -756,6 +756,7 @@ static int spi_transfer_one_message(struct spi_master *master,
struct spi_transfer *xfer;
bool keep_cs = false;
int ret = 0;
+ int ms = 1;
spi_set_cs(msg->spi, true);
@@ -773,7 +774,16 @@ static int spi_transfer_one_message(struct spi_master *master,
if (ret > 0) {
ret = 0;
- wait_for_completion(&master->xfer_completion);
+ ms = xfer->len * 8 * 1000 / xfer->speed_hz;
+ ms += 10; /* some tolerance */
+
+ ms = wait_for_completion_timeout(&master->xfer_completion,
+ msecs_to_jiffies(ms));
+ }
+
+ if (ms == 0) {
+ dev_err(&msg->spi->dev, "SPI transfer timed out\n");
+ msg->status = -ETIMEDOUT;
}
trace_spi_transfer_stop(msg, xfer);