diff options
Diffstat (limited to 'drivers/scsi/isci/isci.h')
| -rw-r--r-- | drivers/scsi/isci/isci.h | 538 |
1 files changed, 538 insertions, 0 deletions
diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h new file mode 100644 index 000000000000..d1de63312e7f --- /dev/null +++ b/drivers/scsi/isci/isci.h @@ -0,0 +1,538 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __ISCI_H__ +#define __ISCI_H__ + +#include <linux/interrupt.h> +#include <linux/types.h> + +#define DRV_NAME "isci" +#define SCI_PCI_BAR_COUNT 2 +#define SCI_NUM_MSI_X_INT 2 +#define SCI_SMU_BAR 0 +#define SCI_SMU_BAR_SIZE (16*1024) +#define SCI_SCU_BAR 1 +#define SCI_SCU_BAR_SIZE (4*1024*1024) +#define SCI_IO_SPACE_BAR0 2 +#define SCI_IO_SPACE_BAR1 3 +#define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ +#define SCIC_CONTROLLER_STOP_TIMEOUT 5000 + +#define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF + +#define SCI_MAX_PHYS (4UL) +#define SCI_MAX_PORTS SCI_MAX_PHYS +#define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */ +#define SCI_MAX_REMOTE_DEVICES (256UL) +#define SCI_MAX_IO_REQUESTS (256UL) +#define SCI_MAX_SEQ (16) +#define SCI_MAX_MSIX_MESSAGES (2) +#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */ +#define SCI_MAX_CONTROLLERS 2 +#define SCI_MAX_DOMAINS SCI_MAX_PORTS + +#define SCU_MAX_CRITICAL_NOTIFICATIONS (384) +#define SCU_MAX_EVENTS_SHIFT (7) +#define SCU_MAX_EVENTS (1 << SCU_MAX_EVENTS_SHIFT) +#define SCU_MAX_UNSOLICITED_FRAMES (128) +#define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128) +#define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \ + + SCU_MAX_EVENTS \ + + SCU_MAX_UNSOLICITED_FRAMES \ + + SCI_MAX_IO_REQUESTS \ + + SCU_MAX_COMPLETION_QUEUE_SCRATCH) +#define SCU_MAX_COMPLETION_QUEUE_SHIFT (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES)) + +#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) +#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024) +#define SCU_INVALID_FRAME_INDEX (0xFFFF) + +#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF) +#define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF) + +static inline void check_sizes(void) +{ + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_EVENTS); + BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES <= 8); + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_UNSOLICITED_FRAMES); + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES); + BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES); + BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_IO_REQUESTS); + BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_SEQ); +} + +/** + * enum sci_status - This is the general return status enumeration for non-IO, + * non-task management related SCI interface methods. + * + * + */ +enum sci_status { + /** + * This member indicates successful completion. + */ + SCI_SUCCESS = 0, + + /** + * This value indicates that the calling method completed successfully, + * but that the IO may have completed before having it's start method + * invoked. This occurs during SAT translation for requests that do + * not require an IO to the target or for any other requests that may + * be completed without having to submit IO. + */ + SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + + /** + * This Value indicates that the SCU hardware returned an early response + * because the io request specified more data than is returned by the + * target device (mode pages, inquiry data, etc.). The completion routine + * will handle this case to get the actual number of bytes transferred. + */ + SCI_SUCCESS_IO_DONE_EARLY, + + /** + * This member indicates that the object for which a state change is + * being requested is already in said state. + */ + SCI_WARNING_ALREADY_IN_STATE, + + /** + * This member indicates interrupt coalescence timer may cause SAS + * specification compliance issues (i.e. SMP target mode response + * frames must be returned within 1.9 milliseconds). + */ + SCI_WARNING_TIMER_CONFLICT, + + /** + * This field indicates a sequence of action is not completed yet. Mostly, + * this status is used when multiple ATA commands are needed in a SATI translation. + */ + SCI_WARNING_SEQUENCE_INCOMPLETE, + + /** + * This member indicates that there was a general failure. + */ + SCI_FAILURE, + + /** + * This member indicates that the SCI implementation is unable to complete + * an operation due to a critical flaw the prevents any further operation + * (i.e. an invalid pointer). + */ + SCI_FATAL_ERROR, + + /** + * This member indicates the calling function failed, because the state + * of the controller is in a state that prevents successful completion. + */ + SCI_FAILURE_INVALID_STATE, + + /** + * This member indicates the calling function failed, because there is + * insufficient resources/memory to complete the request. + */ + SCI_FAILURE_INSUFFICIENT_RESOURCES, + + /** + * This member indicates the calling function failed, because the + * controller object required for the operation can't be located. + */ + SCI_FAILURE_CONTROLLER_NOT_FOUND, + + /** + * This member indicates the calling function failed, because the + * discovered controller type is not supported by the library. + */ + SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE, + + /** + * This member indicates the calling function failed, because the + * requested initialization data version isn't supported. + */ + SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION, + + /** + * This member indicates the calling function failed, because the + * requested configuration of SAS Phys into SAS Ports is not supported. + */ + SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION, + + /** + * This member indicates the calling function failed, because the + * requested protocol is not supported by the remote device, port, + * or controller. + */ + SCI_FAILURE_UNSUPPORTED_PROTOCOL, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_TYPE, + + /** + * This member indicates the calling function failed, because the + * device already exists. + */ + SCI_FAILURE_DEVICE_EXISTS, + + /** + * This member indicates the calling function failed, because adding + * a phy to the object is not possible. + */ + SCI_FAILURE_ADDING_PHY_UNSUPPORTED, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD, + + /** + * This member indicates the calling function failed, because the SCI + * implementation does not support the supplied time limit. + */ + SCI_FAILURE_UNSUPPORTED_TIME_LIMIT, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Phy. + */ + SCI_FAILURE_INVALID_PHY, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Port. + */ + SCI_FAILURE_INVALID_PORT, + + /** + * This member indicates the calling method was partly successful + * The port was reset but not all phys in port are operational + */ + SCI_FAILURE_RESET_PORT_PARTIAL_SUCCESS, + + /** + * This member indicates that calling method failed + * The port reset did not complete because none of the phys are operational + */ + SCI_FAILURE_RESET_PORT_FAILURE, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified remote device. + */ + SCI_FAILURE_INVALID_REMOTE_DEVICE, + + /** + * This member indicates the calling method failed, because the remote + * device is in a bad state and requires a reset. + */ + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain or support the specified IO tag. + */ + SCI_FAILURE_INVALID_IO_TAG, + + /** + * This member indicates that the operation failed and the user should + * check the response data associated with the IO. + */ + SCI_FAILURE_IO_RESPONSE_VALID, + + /** + * This member indicates that the operation failed, the failure is + * controller implementation specific, and the response data associated + * with the request is not valid. You can query for the controller + * specific error information via sci_controller_get_request_status() + */ + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + + /** + * This member indicated that the operation failed because the + * user requested this IO to be terminated. + */ + SCI_FAILURE_IO_TERMINATED, + + /** + * This member indicates that the operation failed and the associated + * request requires a SCSI abort task to be sent to the target. + */ + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + + /** + * This member indicates that the operation failed because the supplied + * device could not be located. + */ + SCI_FAILURE_DEVICE_NOT_FOUND, + + /** + * This member indicates that the operation failed because the + * objects association is required and is not correctly set. + */ + SCI_FAILURE_INVALID_ASSOCIATION, + + /** + * This member indicates that the operation failed, because a timeout + * occurred. + */ + SCI_FAILURE_TIMEOUT, + + /** + * This member indicates that the operation failed, because the user + * specified a value that is either invalid or not supported. + */ + SCI_FAILURE_INVALID_PARAMETER_VALUE, + + /** + * This value indicates that the operation failed, because the number + * of messages (MSI-X) is not supported. + */ + SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT, + + /** + * This value indicates that the method failed due to a lack of + * available NCQ tags. + */ + SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + + /** + * This value indicates that a protocol violation has occurred on the + * link. + */ + SCI_FAILURE_PROTOCOL_VIOLATION, + + /** + * This value indicates a failure condition that retry may help to clear. + */ + SCI_FAILURE_RETRY_REQUIRED, + + /** + * This field indicates the retry limit was reached when a retry is attempted + */ + SCI_FAILURE_RETRY_LIMIT_REACHED, + + /** + * This member indicates the calling method was partly successful. + * Mostly, this status is used when a LUN_RESET issued to an expander attached + * STP device in READY NCQ substate needs to have RNC suspended/resumed + * before posting TC. + */ + SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS, + + /** + * This field indicates an illegal phy connection based on the routing attribute + * of both expander phy attached to each other. + */ + SCI_FAILURE_ILLEGAL_ROUTING_ATTRIBUTE_CONFIGURATION, + + /** + * This field indicates a CONFIG ROUTE INFO command has a response with function result + * INDEX DOES NOT EXIST, usually means exceeding max route index. + */ + SCI_FAILURE_EXCEED_MAX_ROUTE_INDEX, + + /** + * This value indicates that an unsupported PCI device ID has been + * specified. This indicates that attempts to invoke + * sci_library_allocate_controller() will fail. + */ + SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID + +}; + +/** + * enum sci_io_status - This enumeration depicts all of the possible IO + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Add the API to retrieve the SCU status from the core. Check to see that the + * following status are properly handled: - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL + * - SCI_IO_FAILURE_INVALID_IO_TAG + */ +enum sci_io_status { + SCI_IO_SUCCESS = SCI_SUCCESS, + SCI_IO_FAILURE = SCI_FAILURE, + SCI_IO_SUCCESS_COMPLETE_BEFORE_START = SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + SCI_IO_SUCCESS_IO_DONE_EARLY = SCI_SUCCESS_IO_DONE_EARLY, + SCI_IO_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_IO_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_IO_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_IO_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_IO_FAILURE_REQUIRES_SCSI_ABORT = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + SCI_IO_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE = SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + SCI_IO_FAILURE_PROTOCOL_VIOLATION = SCI_FAILURE_PROTOCOL_VIOLATION, + + SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + SCI_IO_FAILURE_RETRY_REQUIRED = SCI_FAILURE_RETRY_REQUIRED, + SCI_IO_FAILURE_RETRY_LIMIT_REACHED = SCI_FAILURE_RETRY_LIMIT_REACHED, + SCI_IO_FAILURE_INVALID_REMOTE_DEVICE = SCI_FAILURE_INVALID_REMOTE_DEVICE +}; + +/** + * enum sci_task_status - This enumeration depicts all of the possible task + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Check to see that the following status are properly handled: + */ +enum sci_task_status { + SCI_TASK_SUCCESS = SCI_SUCCESS, + SCI_TASK_FAILURE = SCI_FAILURE, + SCI_TASK_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_TASK_FAILURE_INVALID_TAG = SCI_FAILURE_INVALID_IO_TAG, + SCI_TASK_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_TASK_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + + SCI_TASK_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + SCI_TASK_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS = SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS + +}; + +/** + * sci_swab32_cpy - convert between scsi and scu-hardware byte format + * @dest: receive the 4-byte endian swapped version of src + * @src: word aligned source buffer + * + * scu hardware handles SSP/SMP control, response, and unidentified + * frames in "big endian dword" order. Regardless of host endian this + * is always a swab32()-per-dword conversion of the standard definition, + * i.e. single byte fields swapped and multi-byte fields in little- + * endian + */ +static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt) +{ + u32 *dest = _dest, *src = _src; + + while (--word_cnt >= 0) + dest[word_cnt] = swab32(src[word_cnt]); +} + +extern unsigned char no_outbound_task_to; +extern u16 ssp_max_occ_to; +extern u16 stp_max_occ_to; +extern u16 ssp_inactive_to; +extern u16 stp_inactive_to; +extern unsigned char phy_gen; +extern unsigned char max_concurr_spinup; + +irqreturn_t isci_msix_isr(int vec, void *data); +irqreturn_t isci_intx_isr(int vec, void *data); +irqreturn_t isci_error_isr(int vec, void *data); + +/* + * Each timer is associated with a cancellation flag that is set when + * del_timer() is called and checked in the timer callback function. This + * is needed since del_timer_sync() cannot be called with sci_lock held. + * For deinit however, del_timer_sync() is used without holding the lock. + */ +struct sci_timer { + struct timer_list timer; + bool cancel; +}; + +static inline +void sci_init_timer(struct sci_timer *tmr, void (*fn)(unsigned long)) +{ + tmr->timer.function = fn; + tmr->timer.data = (unsigned long) tmr; + tmr->cancel = 0; + init_timer(&tmr->timer); +} + +static inline void sci_mod_timer(struct sci_timer *tmr, unsigned long msec) +{ + tmr->cancel = 0; + mod_timer(&tmr->timer, jiffies + msecs_to_jiffies(msec)); +} + +static inline void sci_del_timer(struct sci_timer *tmr) +{ + tmr->cancel = 1; + del_timer(&tmr->timer); +} + +struct sci_base_state_machine { + const struct sci_base_state *state_table; + u32 initial_state_id; + u32 current_state_id; + u32 previous_state_id; +}; + +typedef void (*sci_state_transition_t)(struct sci_base_state_machine *sm); + +struct sci_base_state { + sci_state_transition_t enter_state; /* Called on state entry */ + sci_state_transition_t exit_state; /* Called on state exit */ +}; + +extern void sci_init_sm(struct sci_base_state_machine *sm, + const struct sci_base_state *state_table, + u32 initial_state); +extern void sci_change_state(struct sci_base_state_machine *sm, u32 next_state); +#endif /* __ISCI_H__ */ |