diff options
Diffstat (limited to 'drivers/reset')
| -rw-r--r-- | drivers/reset/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/reset/Makefile | 2 | ||||
| -rw-r--r-- | drivers/reset/reset-imx7.c | 1 | ||||
| -rw-r--r-- | drivers/reset/reset-microchip-sparx5.c | 22 | ||||
| -rw-r--r-- | drivers/reset/reset-mpfs.c | 157 | ||||
| -rw-r--r-- | drivers/reset/reset-npcm.c | 2 |
6 files changed, 185 insertions, 8 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 806773e88832..de176c2fbad9 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -152,6 +152,13 @@ config RESET_PISTACHIO help This enables the reset driver for ImgTec Pistachio SoCs. +config RESET_POLARFIRE_SOC + bool "Microchip PolarFire SoC (MPFS) Reset Driver" + depends on AUXILIARY_BUS && MCHP_CLK_MPFS + default MCHP_CLK_MPFS + help + This driver supports peripheral reset for the Microchip PolarFire SoC + config RESET_QCOM_AOSS tristate "Qcom AOSS Reset Driver" depends on ARCH_QCOM || COMPILE_TEST @@ -201,7 +208,7 @@ config RESET_SCMI config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT - default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC + default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC depends on HAS_IOMEM help This enables a simple reset controller driver for reset lines that diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index cd5cf8e7c6a7..3e7e5fd633a8 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o obj-$(CONFIG_RESET_NPCM) += reset-npcm.o obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o +obj-$(CONFIG_RESET_POLARFIRE_SOC) += reset-mpfs.o obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o @@ -40,4 +41,3 @@ obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o obj-$(CONFIG_ARCH_ZYNQMP) += reset-zynqmp.o - diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c index 185a333df66c..d2408725eb2c 100644 --- a/drivers/reset/reset-imx7.c +++ b/drivers/reset/reset-imx7.c @@ -329,6 +329,7 @@ static int imx8mp_reset_set(struct reset_controller_dev *rcdev, break; case IMX8MP_RESET_PCIE_CTRL_APPS_EN: + case IMX8MP_RESET_PCIEPHY_PERST: value = assert ? 0 : bit; break; } diff --git a/drivers/reset/reset-microchip-sparx5.c b/drivers/reset/reset-microchip-sparx5.c index 00b612a0effa..f3528dd1d084 100644 --- a/drivers/reset/reset-microchip-sparx5.c +++ b/drivers/reset/reset-microchip-sparx5.c @@ -33,11 +33,8 @@ static struct regmap_config sparx5_reset_regmap_config = { .reg_stride = 4, }; -static int sparx5_switch_reset(struct reset_controller_dev *rcdev, - unsigned long id) +static int sparx5_switch_reset(struct mchp_reset_context *ctx) { - struct mchp_reset_context *ctx = - container_of(rcdev, struct mchp_reset_context, rcdev); u32 val; /* Make sure the core is PROTECTED from reset */ @@ -54,8 +51,14 @@ static int sparx5_switch_reset(struct reset_controller_dev *rcdev, 1, 100); } +static int sparx5_reset_noop(struct reset_controller_dev *rcdev, + unsigned long id) +{ + return 0; +} + static const struct reset_control_ops sparx5_reset_ops = { - .reset = sparx5_switch_reset, + .reset = sparx5_reset_noop, }; static int mchp_sparx5_map_syscon(struct platform_device *pdev, char *name, @@ -122,6 +125,11 @@ static int mchp_sparx5_reset_probe(struct platform_device *pdev) ctx->rcdev.of_node = dn; ctx->props = device_get_match_data(&pdev->dev); + /* Issue the reset very early, our actual reset callback is a noop. */ + err = sparx5_switch_reset(ctx); + if (err) + return err; + return devm_reset_controller_register(&pdev->dev, &ctx->rcdev); } @@ -163,6 +171,10 @@ static int __init mchp_sparx5_reset_init(void) return platform_driver_register(&mchp_sparx5_reset_driver); } +/* + * Because this is a global reset, keep this postcore_initcall() to issue the + * reset as early as possible during the kernel startup. + */ postcore_initcall(mchp_sparx5_reset_init); MODULE_DESCRIPTION("Microchip Sparx5 switch reset driver"); diff --git a/drivers/reset/reset-mpfs.c b/drivers/reset/reset-mpfs.c new file mode 100644 index 000000000000..e003e50590ec --- /dev/null +++ b/drivers/reset/reset-mpfs.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PolarFire SoC (MPFS) Peripheral Clock Reset Controller + * + * Author: Conor Dooley <conor.dooley@microchip.com> + * Copyright (c) 2022 Microchip Technology Inc. and its subsidiaries. + * + */ +#include <linux/auxiliary_bus.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <dt-bindings/clock/microchip,mpfs-clock.h> +#include <soc/microchip/mpfs.h> + +/* + * The ENVM reset is the lowest bit in the register & I am using the CLK_FOO + * defines in the dt to make things easier to configure - so this is accounting + * for the offset of 3 there. + */ +#define MPFS_PERIPH_OFFSET CLK_ENVM +#define MPFS_NUM_RESETS 30u +#define MPFS_SLEEP_MIN_US 100 +#define MPFS_SLEEP_MAX_US 200 + +/* block concurrent access to the soft reset register */ +static DEFINE_SPINLOCK(mpfs_reset_lock); + +/* + * Peripheral clock resets + */ + +static int mpfs_assert(struct reset_controller_dev *rcdev, unsigned long id) +{ + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&mpfs_reset_lock, flags); + + reg = mpfs_reset_read(rcdev->dev); + reg |= BIT(id); + mpfs_reset_write(rcdev->dev, reg); + + spin_unlock_irqrestore(&mpfs_reset_lock, flags); + + return 0; +} + +static int mpfs_deassert(struct reset_controller_dev *rcdev, unsigned long id) +{ + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&mpfs_reset_lock, flags); + + reg = mpfs_reset_read(rcdev->dev); + reg &= ~BIT(id); + mpfs_reset_write(rcdev->dev, reg); + + spin_unlock_irqrestore(&mpfs_reset_lock, flags); + + return 0; +} + +static int mpfs_status(struct reset_controller_dev *rcdev, unsigned long id) +{ + u32 reg = mpfs_reset_read(rcdev->dev); + + /* + * It is safe to return here as MPFS_NUM_RESETS makes sure the sign bit + * is never hit. + */ + return (reg & BIT(id)); +} + +static int mpfs_reset(struct reset_controller_dev *rcdev, unsigned long id) +{ + mpfs_assert(rcdev, id); + + usleep_range(MPFS_SLEEP_MIN_US, MPFS_SLEEP_MAX_US); + + mpfs_deassert(rcdev, id); + + return 0; +} + +static const struct reset_control_ops mpfs_reset_ops = { + .reset = mpfs_reset, + .assert = mpfs_assert, + .deassert = mpfs_deassert, + .status = mpfs_status, +}; + +static int mpfs_reset_xlate(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec) +{ + unsigned int index = reset_spec->args[0]; + + /* + * CLK_RESERVED does not map to a clock, but it does map to a reset, + * so it has to be accounted for here. It is the reset for the fabric, + * so if this reset gets called - do not reset it. + */ + if (index == CLK_RESERVED) { + dev_err(rcdev->dev, "Resetting the fabric is not supported\n"); + return -EINVAL; + } + + if (index < MPFS_PERIPH_OFFSET || index >= (MPFS_PERIPH_OFFSET + rcdev->nr_resets)) { + dev_err(rcdev->dev, "Invalid reset index %u\n", index); + return -EINVAL; + } + + return index - MPFS_PERIPH_OFFSET; +} + +static int mpfs_reset_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct device *dev = &adev->dev; + struct reset_controller_dev *rcdev; + + rcdev = devm_kzalloc(dev, sizeof(*rcdev), GFP_KERNEL); + if (!rcdev) + return -ENOMEM; + + rcdev->dev = dev; + rcdev->dev->parent = dev->parent; + rcdev->ops = &mpfs_reset_ops; + rcdev->of_node = dev->parent->of_node; + rcdev->of_reset_n_cells = 1; + rcdev->of_xlate = mpfs_reset_xlate; + rcdev->nr_resets = MPFS_NUM_RESETS; + + return devm_reset_controller_register(dev, rcdev); +} + +static const struct auxiliary_device_id mpfs_reset_ids[] = { + { + .name = "clk_mpfs.reset-mpfs", + }, + { } +}; +MODULE_DEVICE_TABLE(auxiliary, mpfs_reset_ids); + +static struct auxiliary_driver mpfs_reset_driver = { + .probe = mpfs_reset_probe, + .id_table = mpfs_reset_ids, +}; + +module_auxiliary_driver(mpfs_reset_driver); + +MODULE_DESCRIPTION("Microchip PolarFire SoC Reset Driver"); +MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(MCHP_CLK_MPFS); diff --git a/drivers/reset/reset-npcm.c b/drivers/reset/reset-npcm.c index 24c55efa98e5..f2333506b0a6 100644 --- a/drivers/reset/reset-npcm.c +++ b/drivers/reset/reset-npcm.c @@ -291,7 +291,7 @@ static void npcm_usb_reset_npcm8xx(struct npcm_rc_data *rc) iprst2 |= ipsrst2_bits; iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2); - iprst2 |= ipsrst4_bits; + iprst4 |= ipsrst4_bits; writel(iprst1, rc->base + NPCM_IPSRST1); writel(iprst2, rc->base + NPCM_IPSRST2); |