summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/helpers.c101
-rw-r--r--drivers/regulator/mt6315-regulator.c4
-rw-r--r--drivers/regulator/pca9450-regulator.c10
-rw-r--r--drivers/regulator/qcom-rpmh-regulator.c6
-rw-r--r--drivers/regulator/rt4831-regulator.c4
5 files changed, 109 insertions, 16 deletions
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index f42b394a0c46..0e16e31c968f 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -509,6 +509,33 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range);
/**
+ * regulator_desc_list_voltage_linear - List voltages with simple calculation
+ *
+ * @desc: Regulator desc for regulator which volatges are to be listed
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with a simple linear mapping between voltages and
+ * selectors can set min_uV and uV_step in the regulator descriptor
+ * and then use this function prior regulator registration to list
+ * the voltages. This is useful when voltages need to be listed during
+ * device-tree parsing.
+ */
+int regulator_desc_list_voltage_linear(const struct regulator_desc *desc,
+ unsigned int selector)
+{
+ if (selector >= desc->n_voltages)
+ return -EINVAL;
+
+ if (selector < desc->linear_min_sel)
+ return 0;
+
+ selector -= desc->linear_min_sel;
+
+ return desc->min_uV + (desc->uV_step * selector);
+}
+EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear);
+
+/**
* regulator_list_voltage_linear - List voltages with simple calculation
*
* @rdev: Regulator device
@@ -521,14 +548,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range);
int regulator_list_voltage_linear(struct regulator_dev *rdev,
unsigned int selector)
{
- if (selector >= rdev->desc->n_voltages)
- return -EINVAL;
- if (selector < rdev->desc->linear_min_sel)
- return 0;
-
- selector -= rdev->desc->linear_min_sel;
-
- return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
+ return regulator_desc_list_voltage_linear(rdev->desc, selector);
}
EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
@@ -881,3 +901,68 @@ bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2)
return reg1->rdev == reg2->rdev;
}
EXPORT_SYMBOL_GPL(regulator_is_equal);
+
+static int find_closest_bigger(unsigned int target, const unsigned int *table,
+ unsigned int num_sel, unsigned int *sel)
+{
+ unsigned int s, tmp, max, maxsel = 0;
+ bool found = false;
+
+ max = table[0];
+
+ for (s = 0; s < num_sel; s++) {
+ if (table[s] > max) {
+ max = table[s];
+ maxsel = s;
+ }
+ if (table[s] >= target) {
+ if (!found || table[s] - target < tmp - target) {
+ tmp = table[s];
+ *sel = s;
+ found = true;
+ if (tmp == target)
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ *sel = maxsel;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * regulator_set_ramp_delay_regmap - set_ramp_delay() helper
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the ramp_reg
+ * and ramp_mask fields in their descriptor and then use this as their
+ * set_ramp_delay operation, saving some code.
+ */
+int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay)
+{
+ int ret;
+ unsigned int sel;
+
+ if (!rdev->desc->n_ramp_values)
+ return -EINVAL;
+
+ ret = find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table,
+ rdev->desc->n_ramp_values, &sel);
+
+ if (ret) {
+ dev_warn(rdev_get_dev(rdev),
+ "Can't set ramp-delay %u, setting %u\n", ramp_delay,
+ rdev->desc->ramp_delay_table[sel]);
+ }
+
+ sel <<= ffs(rdev->desc->ramp_mask) - 1;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg,
+ rdev->desc->ramp_mask, sel);
+}
+EXPORT_SYMBOL_GPL(regulator_set_ramp_delay_regmap);
diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c
index d49a1534d8e9..9edc34981ee0 100644
--- a/drivers/regulator/mt6315-regulator.c
+++ b/drivers/regulator/mt6315-regulator.c
@@ -41,7 +41,7 @@ struct mt6315_chip {
.type = REGULATOR_VOLTAGE, \
.id = _bid, \
.owner = THIS_MODULE, \
- .n_voltages = 0xbf, \
+ .n_voltages = 0xc0, \
.linear_ranges = mt_volt_range1, \
.n_linear_ranges = ARRAY_SIZE(mt_volt_range1), \
.vsel_reg = _vsel, \
@@ -69,7 +69,7 @@ static unsigned int mt6315_map_mode(u32 mode)
case MT6315_BUCK_MODE_LP:
return REGULATOR_MODE_IDLE;
default:
- return -EINVAL;
+ return REGULATOR_MODE_INVALID;
}
}
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 833d398c6aa2..2f7ee212cb8c 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
return ret;
}
+ /* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */
+ ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS,
+ BUCK123_PRESET_EN);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret);
+ return ret;
+ }
+
/* Set reset behavior on assertion of WDOG_B signal */
ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);
@@ -814,7 +822,7 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
if (IS_ERR(pca9450->sd_vsel_gpio)) {
dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n");
- return ret;
+ return PTR_ERR(pca9450->sd_vsel_gpio);
}
dev_info(&i2c->dev, "%s probed.\n",
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 79a554f1029d..65a108c9121f 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -726,8 +726,8 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_ops,
- .voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 16000),
- .n_voltages = 5,
+ .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 235, 16000),
+ .n_voltages = 236,
.pmic_mode_map = pmic_mode_map_pmic5_smps,
.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
};
@@ -901,7 +901,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
};
static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
- RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
+ RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps515, "vdd-s1"),
RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"),
diff --git a/drivers/regulator/rt4831-regulator.c b/drivers/regulator/rt4831-regulator.c
index 3d4695ded629..e3aaac90d238 100644
--- a/drivers/regulator/rt4831-regulator.c
+++ b/drivers/regulator/rt4831-regulator.c
@@ -153,9 +153,9 @@ static int rt4831_regulator_probe(struct platform_device *pdev)
int i, ret;
regmap = dev_get_regmap(pdev->dev.parent, NULL);
- if (IS_ERR(regmap)) {
+ if (!regmap) {
dev_err(&pdev->dev, "Failed to init regmap\n");
- return PTR_ERR(regmap);
+ return -ENODEV;
}
/* Configure DSV mode to normal by default */
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-17 21:28:51 +0000