diff options
Diffstat (limited to 'drivers/phy/rockchip')
| -rw-r--r-- | drivers/phy/rockchip/Kconfig | 51 | ||||
| -rw-r--r-- | drivers/phy/rockchip/Makefile | 6 | ||||
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-dp.c | 154 | ||||
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-emmc.c | 383 | ||||
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 1350 | ||||
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-pcie.c | 346 | ||||
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-typec.c | 1023 | ||||
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-usb.c | 540 |
8 files changed, 3853 insertions, 0 deletions
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig new file mode 100644 index 000000000000..f5325b2b679e --- /dev/null +++ b/drivers/phy/rockchip/Kconfig @@ -0,0 +1,51 @@ +# +# Phy drivers for Rockchip platforms +# +config PHY_ROCKCHIP_DP + tristate "Rockchip Display Port PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip Display Port PHY. + +config PHY_ROCKCHIP_EMMC + tristate "Rockchip EMMC PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip EMMC PHY. + +config PHY_ROCKCHIP_INNO_USB2 + tristate "Rockchip INNO USB2PHY Driver" + depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF + depends on COMMON_CLK + depends on EXTCON + depends on USB_SUPPORT + select GENERIC_PHY + select USB_COMMON + help + Support for Rockchip USB2.0 PHY with Innosilicon IP block. + +config PHY_ROCKCHIP_PCIE + tristate "Rockchip PCIe PHY Driver" + depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the Rockchip PCIe PHY. + +config PHY_ROCKCHIP_TYPEC + tristate "Rockchip TYPEC PHY Driver" + depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) + select EXTCON + select GENERIC_PHY + select RESET_CONTROLLER + help + Enable this to support the Rockchip USB TYPEC PHY. + +config PHY_ROCKCHIP_USB + tristate "Rockchip USB2 PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip USB 2.0 PHY. diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile new file mode 100644 index 000000000000..bd0acdf38e0f --- /dev/null +++ b/drivers/phy/rockchip/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o +obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o +obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o +obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o diff --git a/drivers/phy/rockchip/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c new file mode 100644 index 000000000000..8b267a746576 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-dp.c @@ -0,0 +1,154 @@ +/* + * Rockchip DP PHY driver + * + * Copyright (C) 2016 FuZhou Rockchip Co., Ltd. + * Author: Yakir Yang <ykk@@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define GRF_SOC_CON12 0x0274 + +#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20) +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4) + +#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21) +#define GRF_EDP_PHY_SIDDQ_ON 0 +#define GRF_EDP_PHY_SIDDQ_OFF BIT(5) + +struct rockchip_dp_phy { + struct device *dev; + struct regmap *grf; + struct clk *phy_24m; +}; + +static int rockchip_set_phy_state(struct phy *phy, bool enable) +{ + struct rockchip_dp_phy *dp = phy_get_drvdata(phy); + int ret; + + if (enable) { + ret = regmap_write(dp->grf, GRF_SOC_CON12, + GRF_EDP_PHY_SIDDQ_HIWORD_MASK | + GRF_EDP_PHY_SIDDQ_ON); + if (ret < 0) { + dev_err(dp->dev, "Can't enable PHY power %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(dp->phy_24m); + } else { + clk_disable_unprepare(dp->phy_24m); + + ret = regmap_write(dp->grf, GRF_SOC_CON12, + GRF_EDP_PHY_SIDDQ_HIWORD_MASK | + GRF_EDP_PHY_SIDDQ_OFF); + } + + return ret; +} + +static int rockchip_dp_phy_power_on(struct phy *phy) +{ + return rockchip_set_phy_state(phy, true); +} + +static int rockchip_dp_phy_power_off(struct phy *phy) +{ + return rockchip_set_phy_state(phy, false); +} + +static const struct phy_ops rockchip_dp_phy_ops = { + .power_on = rockchip_dp_phy_power_on, + .power_off = rockchip_dp_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_dp_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + struct rockchip_dp_phy *dp; + struct phy *phy; + int ret; + + if (!np) + return -ENODEV; + + if (!dev->parent || !dev->parent->of_node) + return -ENODEV; + + dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL); + if (!dp) + return -ENOMEM; + + dp->dev = dev; + + dp->phy_24m = devm_clk_get(dev, "24m"); + if (IS_ERR(dp->phy_24m)) { + dev_err(dev, "cannot get clock 24m\n"); + return PTR_ERR(dp->phy_24m); + } + + ret = clk_set_rate(dp->phy_24m, 24000000); + if (ret < 0) { + dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret); + return ret; + } + + dp->grf = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(dp->grf)) { + dev_err(dev, "rk3288-dp needs the General Register Files syscon\n"); + return PTR_ERR(dp->grf); + } + + ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER | + GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK); + if (ret != 0) { + dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret); + return ret; + } + + phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, dp); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id rockchip_dp_phy_dt_ids[] = { + { .compatible = "rockchip,rk3288-dp-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids); + +static struct platform_driver rockchip_dp_phy_driver = { + .probe = rockchip_dp_phy_probe, + .driver = { + .name = "rockchip-dp-phy", + .of_match_table = rockchip_dp_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_dp_phy_driver); + +MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip DP PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c new file mode 100644 index 000000000000..f1b24f18e9b2 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-emmc.c @@ -0,0 +1,383 @@ +/* + * Rockchip emmc PHY driver + * + * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com> + * Copyright (C) 2016 ROCKCHIP, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* + * The higher 16-bit of this register is used for write protection + * only if BIT(x + 16) set to 1 the BIT(x) can be written. + */ +#define HIWORD_UPDATE(val, mask, shift) \ + ((val) << (shift) | (mask) << ((shift) + 16)) + +/* Register definition */ +#define GRF_EMMCPHY_CON0 0x0 +#define GRF_EMMCPHY_CON1 0x4 +#define GRF_EMMCPHY_CON2 0x8 +#define GRF_EMMCPHY_CON3 0xc +#define GRF_EMMCPHY_CON4 0x10 +#define GRF_EMMCPHY_CON5 0x14 +#define GRF_EMMCPHY_CON6 0x18 +#define GRF_EMMCPHY_STATUS 0x20 + +#define PHYCTRL_PDB_MASK 0x1 +#define PHYCTRL_PDB_SHIFT 0x0 +#define PHYCTRL_PDB_PWR_ON 0x1 +#define PHYCTRL_PDB_PWR_OFF 0x0 +#define PHYCTRL_ENDLL_MASK 0x1 +#define PHYCTRL_ENDLL_SHIFT 0x1 +#define PHYCTRL_ENDLL_ENABLE 0x1 +#define PHYCTRL_ENDLL_DISABLE 0x0 +#define PHYCTRL_CALDONE_MASK 0x1 +#define PHYCTRL_CALDONE_SHIFT 0x6 +#define PHYCTRL_CALDONE_DONE 0x1 +#define PHYCTRL_CALDONE_GOING 0x0 +#define PHYCTRL_DLLRDY_MASK 0x1 +#define PHYCTRL_DLLRDY_SHIFT 0x5 +#define PHYCTRL_DLLRDY_DONE 0x1 +#define PHYCTRL_DLLRDY_GOING 0x0 +#define PHYCTRL_FREQSEL_200M 0x0 +#define PHYCTRL_FREQSEL_50M 0x1 +#define PHYCTRL_FREQSEL_100M 0x2 +#define PHYCTRL_FREQSEL_150M 0x3 +#define PHYCTRL_FREQSEL_MASK 0x3 +#define PHYCTRL_FREQSEL_SHIFT 0xc +#define PHYCTRL_DR_MASK 0x7 +#define PHYCTRL_DR_SHIFT 0x4 +#define PHYCTRL_DR_50OHM 0x0 +#define PHYCTRL_DR_33OHM 0x1 +#define PHYCTRL_DR_66OHM 0x2 +#define PHYCTRL_DR_100OHM 0x3 +#define PHYCTRL_DR_40OHM 0x4 +#define PHYCTRL_OTAPDLYENA 0x1 +#define PHYCTRL_OTAPDLYENA_MASK 0x1 +#define PHYCTRL_OTAPDLYENA_SHIFT 0xb +#define PHYCTRL_OTAPDLYSEL_MASK 0xf +#define PHYCTRL_OTAPDLYSEL_SHIFT 0x7 + +struct rockchip_emmc_phy { + unsigned int reg_offset; + struct regmap *reg_base; + struct clk *emmcclk; +}; + +static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) +{ + struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); + unsigned int caldone; + unsigned int dllrdy; + unsigned int freqsel = PHYCTRL_FREQSEL_200M; + unsigned long rate; + unsigned long timeout; + + /* + * Keep phyctrl_pdb and phyctrl_endll low to allow + * initialization of CALIO state M/C DFFs + */ + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF, + PHYCTRL_PDB_MASK, + PHYCTRL_PDB_SHIFT)); + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE, + PHYCTRL_ENDLL_MASK, + PHYCTRL_ENDLL_SHIFT)); + + /* Already finish power_off above */ + if (on_off == PHYCTRL_PDB_PWR_OFF) + return 0; + + rate = clk_get_rate(rk_phy->emmcclk); + + if (rate != 0) { + unsigned long ideal_rate; + unsigned long diff; + + switch (rate) { + case 1 ... 74999999: + ideal_rate = 50000000; + freqsel = PHYCTRL_FREQSEL_50M; + break; + case 75000000 ... 124999999: + ideal_rate = 100000000; + freqsel = PHYCTRL_FREQSEL_100M; + break; + case 125000000 ... 174999999: + ideal_rate = 150000000; + freqsel = PHYCTRL_FREQSEL_150M; + break; + default: + ideal_rate = 200000000; + break; + } + + diff = (rate > ideal_rate) ? + rate - ideal_rate : ideal_rate - rate; + + /* + * In order for tuning delays to be accurate we need to be + * pretty spot on for the DLL range, so warn if we're too + * far off. Also warn if we're above the 200 MHz max. Don't + * warn for really slow rates since we won't be tuning then. + */ + if ((rate > 50000000 && diff > 15000000) || (rate > 200000000)) + dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate); + } + + /* + * According to the user manual, calpad calibration + * cycle takes more than 2us without the minimal recommended + * value, so we may need a little margin here + */ + udelay(3); + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_PDB_PWR_ON, + PHYCTRL_PDB_MASK, + PHYCTRL_PDB_SHIFT)); + + /* + * According to the user manual, it asks driver to + * wait 5us for calpad busy trimming + */ + udelay(5); + regmap_read(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_STATUS, + &caldone); + caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK; + if (caldone != PHYCTRL_CALDONE_DONE) { + pr_err("rockchip_emmc_phy_power: caldone timeout.\n"); + return -ETIMEDOUT; + } + + /* Set the frequency of the DLL operation */ + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON0, + HIWORD_UPDATE(freqsel, PHYCTRL_FREQSEL_MASK, + PHYCTRL_FREQSEL_SHIFT)); + + /* Turn on the DLL */ + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE, + PHYCTRL_ENDLL_MASK, + PHYCTRL_ENDLL_SHIFT)); + + /* + * We turned on the DLL even though the rate was 0 because we the + * clock might be turned on later. ...but we can't wait for the DLL + * to lock when the rate is 0 because it will never lock with no + * input clock. + * + * Technically we should be checking the lock later when the clock + * is turned on, but for now we won't. + */ + if (rate == 0) + return 0; + + /* + * After enabling analog DLL circuits docs say that we need 10.2 us if + * our source clock is at 50 MHz and that lock time scales linearly + * with clock speed. If we are powering on the PHY and the card clock + * is super slow (like 100 kHZ) this could take as long as 5.1 ms as + * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms + * Hopefully we won't be running at 100 kHz, but we should still make + * sure we wait long enough. + * + * NOTE: There appear to be corner cases where the DLL seems to take + * extra long to lock for reasons that aren't understood. In some + * extreme cases we've seen it take up to over 10ms (!). We'll be + * generous and give it 50ms. We still busy wait here because: + * - In most cases it should be super fast. + * - This is not called lots during normal operation so it shouldn't + * be a power or performance problem to busy wait. We expect it + * only at boot / resume. In both cases, eMMC is probably on the + * critical path so busy waiting a little extra time should be OK. + */ + timeout = jiffies + msecs_to_jiffies(50); + do { + udelay(1); + + regmap_read(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_STATUS, + &dllrdy); + dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK; + if (dllrdy == PHYCTRL_DLLRDY_DONE) + break; + } while (!time_after(jiffies, timeout)); + + if (dllrdy != PHYCTRL_DLLRDY_DONE) { + pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int rockchip_emmc_phy_init(struct phy *phy) +{ + struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); + int ret = 0; + + /* + * We purposely get the clock here and not in probe to avoid the + * circular dependency problem. We expect: + * - PHY driver to probe + * - SDHCI driver to start probe + * - SDHCI driver to register it's clock + * - SDHCI driver to get the PHY + * - SDHCI driver to init the PHY + * + * The clock is optional, so upon any error we just set to NULL. + * + * NOTE: we don't do anything special for EPROBE_DEFER here. Given the + * above expected use case, EPROBE_DEFER isn't sensible to expect, so + * it's just like any other error. + */ + rk_phy->emmcclk = clk_get(&phy->dev, "emmcclk"); + if (IS_ERR(rk_phy->emmcclk)) { + dev_dbg(&phy->dev, "Error getting emmcclk: %d\n", ret); + rk_phy->emmcclk = NULL; + } + + return ret; +} + +static int rockchip_emmc_phy_exit(struct phy *phy) +{ + struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); + + clk_put(rk_phy->emmcclk); + + return 0; +} + +static int rockchip_emmc_phy_power_off(struct phy *phy) +{ + /* Power down emmc phy analog blocks */ + return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_OFF); +} + +static int rockchip_emmc_phy_power_on(struct phy *phy) +{ + struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); + + /* Drive impedance: 50 Ohm */ + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON6, + HIWORD_UPDATE(PHYCTRL_DR_50OHM, + PHYCTRL_DR_MASK, + PHYCTRL_DR_SHIFT)); + + /* Output tap delay: enable */ + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON0, + HIWORD_UPDATE(PHYCTRL_OTAPDLYENA, + PHYCTRL_OTAPDLYENA_MASK, + PHYCTRL_OTAPDLYENA_SHIFT)); + + /* Output tap delay */ + regmap_write(rk_phy->reg_base, + rk_phy->reg_offset + GRF_EMMCPHY_CON0, + HIWORD_UPDATE(4, + PHYCTRL_OTAPDLYSEL_MASK, + PHYCTRL_OTAPDLYSEL_SHIFT)); + + /* Power up emmc phy analog blocks */ + return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON); +} + +static const struct phy_ops ops = { + .init = rockchip_emmc_phy_init, + .exit = rockchip_emmc_phy_exit, + .power_on = rockchip_emmc_phy_power_on, + .power_off = rockchip_emmc_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_emmc_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rockchip_emmc_phy *rk_phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct regmap *grf; + unsigned int reg_offset; + + if (!dev->parent || !dev->parent->of_node) + return -ENODEV; + + grf = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(grf)) { + dev_err(dev, "Missing rockchip,grf property\n"); + return PTR_ERR(grf); + } + + rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); + if (!rk_phy) + return -ENOMEM; + + if (of_property_read_u32(dev->of_node, "reg", ®_offset)) { + dev_err(dev, "missing reg property in node %s\n", + dev->of_node->name); + return -EINVAL; + } + + rk_phy->reg_offset = reg_offset; + rk_phy->reg_base = grf; + + generic_phy = devm_phy_create(dev, dev->of_node, &ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, rk_phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id rockchip_emmc_phy_dt_ids[] = { + { .compatible = "rockchip,rk3399-emmc-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_emmc_phy_dt_ids); + +static struct platform_driver rockchip_emmc_driver = { + .probe = rockchip_emmc_phy_probe, + .driver = { + .name = "rockchip-emmc-phy", + .of_match_table = rockchip_emmc_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_emmc_driver); + +MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip EMMC PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c new file mode 100644 index 000000000000..626883d9d176 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -0,0 +1,1350 @@ +/* + * Rockchip USB2.0 PHY with Innosilicon IP block driver + * + * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/extcon.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio/consumer.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/usb/of.h> +#include <linux/usb/otg.h> + +#define BIT_WRITEABLE_SHIFT 16 +#define SCHEDULE_DELAY (60 * HZ) +#define OTG_SCHEDULE_DELAY (2 * HZ) + +enum rockchip_usb2phy_port_id { + USB2PHY_PORT_OTG, + USB2PHY_PORT_HOST, + USB2PHY_NUM_PORTS, +}; + +enum rockchip_usb2phy_host_state { + PHY_STATE_HS_ONLINE = 0, + PHY_STATE_DISCONNECT = 1, + PHY_STATE_CONNECT = 2, + PHY_STATE_FS_LS_ONLINE = 4, +}; + +/** + * Different states involved in USB charger detection. + * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection + * process is not yet started. + * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact. + * USB_CHG_STATE_DCD_DONE Data pin contact is detected. + * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects + * between SDP and DCP/CDP). + * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects + * between DCP and CDP). + * USB_CHG_STATE_DETECTED USB charger type is determined. + */ +enum usb_chg_state { + USB_CHG_STATE_UNDEFINED = 0, + USB_CHG_STATE_WAIT_FOR_DCD, + USB_CHG_STATE_DCD_DONE, + USB_CHG_STATE_PRIMARY_DONE, + USB_CHG_STATE_SECONDARY_DONE, + USB_CHG_STATE_DETECTED, +}; + +static const unsigned int rockchip_usb2phy_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_SLOW, + EXTCON_NONE, +}; + +struct usb2phy_reg { + unsigned int offset; + unsigned int bitend; + unsigned int bitstart; + unsigned int disable; + unsigned int enable; +}; + +/** + * struct rockchip_chg_det_reg: usb charger detect registers + * @cp_det: charging port detected successfully. + * @dcp_det: dedicated charging port detected successfully. + * @dp_det: assert data pin connect successfully. + * @idm_sink_en: open dm sink curren. + * @idp_sink_en: open dp sink current. + * @idp_src_en: open dm source current. + * @rdm_pdwn_en: open dm pull down resistor. + * @vdm_src_en: open dm voltage source. + * @vdp_src_en: open dp voltage source. + * @opmode: utmi operational mode. + */ +struct rockchip_chg_det_reg { + struct usb2phy_reg cp_det; + struct usb2phy_reg dcp_det; + struct usb2phy_reg dp_det; + struct usb2phy_reg idm_sink_en; + struct usb2phy_reg idp_sink_en; + struct usb2phy_reg idp_src_en; + struct usb2phy_reg rdm_pdwn_en; + struct usb2phy_reg vdm_src_en; + struct usb2phy_reg vdp_src_en; + struct usb2phy_reg opmode; +}; + +/** + * struct rockchip_usb2phy_port_cfg: usb-phy port configuration. + * @phy_sus: phy suspend register. + * @bvalid_det_en: vbus valid rise detection enable register. + * @bvalid_det_st: vbus valid rise detection status register. + * @bvalid_det_clr: vbus valid rise detection clear register. + * @ls_det_en: linestate detection enable register. + * @ls_det_st: linestate detection state register. + * @ls_det_clr: linestate detection clear register. + * @utmi_avalid: utmi vbus avalid status register. + * @utmi_bvalid: utmi vbus bvalid status register. + * @utmi_ls: utmi linestate state register. + * @utmi_hstdet: utmi host disconnect register. + */ +struct rockchip_usb2phy_port_cfg { + struct usb2phy_reg phy_sus; + struct usb2phy_reg bvalid_det_en; + struct usb2phy_reg bvalid_det_st; + struct usb2phy_reg bvalid_det_clr; + struct usb2phy_reg ls_det_en; + struct usb2phy_reg ls_det_st; + struct usb2phy_reg ls_det_clr; + struct usb2phy_reg utmi_avalid; + struct usb2phy_reg utmi_bvalid; + struct usb2phy_reg utmi_ls; + struct usb2phy_reg utmi_hstdet; +}; + +/** + * struct rockchip_usb2phy_cfg: usb-phy configuration. + * @reg: the address offset of grf for usb-phy config. + * @num_ports: specify how many ports that the phy has. + * @clkout_ctl: keep on/turn off output clk of phy. + * @chg_det: charger detection registers. + */ +struct rockchip_usb2phy_cfg { + unsigned int reg; + unsigned int num_ports; + struct usb2phy_reg clkout_ctl; + const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS]; + const struct rockchip_chg_det_reg chg_det; +}; + +/** + * struct rockchip_usb2phy_port: usb-phy port data. + * @port_id: flag for otg port or host port. + * @suspended: phy suspended flag. + * @utmi_avalid: utmi avalid status usage flag. + * true - use avalid to get vbus status + * flase - use bvalid to get vbus status + * @vbus_attached: otg device vbus status. + * @bvalid_irq: IRQ number assigned for vbus valid rise detection. + * @ls_irq: IRQ number assigned for linestate detection. + * @mutex: for register updating in sm_work. + * @chg_work: charge detect work. + * @otg_sm_work: OTG state machine work. + * @sm_work: HOST state machine work. + * @phy_cfg: port register configuration, assigned by driver data. + * @event_nb: hold event notification callback. + * @state: define OTG enumeration states before device reset. + * @mode: the dr_mode of the controller. + */ +struct rockchip_usb2phy_port { + struct phy *phy; + unsigned int port_id; + bool suspended; + bool utmi_avalid; + bool vbus_attached; + int bvalid_irq; + int ls_irq; + struct mutex mutex; + struct delayed_work chg_work; + struct delayed_work otg_sm_work; + struct delayed_work sm_work; + const struct rockchip_usb2phy_port_cfg *port_cfg; + struct notifier_block event_nb; + enum usb_otg_state state; + enum usb_dr_mode mode; +}; + +/** + * struct rockchip_usb2phy: usb2.0 phy driver data. + * @grf: General Register Files regmap. + * @clk: clock struct of phy input clk. + * @clk480m: clock struct of phy output clk. + * @clk_hw: clock struct of phy output clk management. + * @chg_state: states involved in USB charger detection. + * @chg_type: USB charger types. + * @dcd_retries: The retry count used to track Data contact + * detection process. + * @edev: extcon device for notification registration + * @phy_cfg: phy register configuration, assigned by driver data. + * @ports: phy port instance. + */ +struct rockchip_usb2phy { + struct device *dev; + struct regmap *grf; + struct clk *clk; + struct clk *clk480m; + struct clk_hw clk480m_hw; + enum usb_chg_state chg_state; + enum power_supply_type chg_type; + u8 dcd_retries; + struct extcon_dev *edev; + const struct rockchip_usb2phy_cfg *phy_cfg; + struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS]; +}; + +static inline int property_enable(struct rockchip_usb2phy *rphy, + const struct usb2phy_reg *reg, bool en) +{ + unsigned int val, mask, tmp; + + tmp = en ? reg->enable : reg->disable; + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + + return regmap_write(rphy->grf, reg->offset, val); +} + +static inline bool property_enabled(struct rockchip_usb2phy *rphy, + const struct usb2phy_reg *reg) +{ + int ret; + unsigned int tmp, orig; + unsigned int mask = GENMASK(reg->bitend, reg->bitstart); + + ret = regmap_read(rphy->grf, reg->offset, &orig); + if (ret) + return false; + + tmp = (orig & mask) >> reg->bitstart; + return tmp == reg->enable; +} + +static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw) +{ + struct rockchip_usb2phy *rphy = + container_of(hw, struct rockchip_usb2phy, clk480m_hw); + int ret; + + /* turn on 480m clk output if it is off */ + if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) { + ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true); + if (ret) + return ret; + + /* waiting for the clk become stable */ + usleep_range(1200, 1300); + } + + return 0; +} + +static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw) +{ + struct rockchip_usb2phy *rphy = + container_of(hw, struct rockchip_usb2phy, clk480m_hw); + + /* turn off 480m clk output */ + property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false); +} + +static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw) +{ + struct rockchip_usb2phy *rphy = + container_of(hw, struct rockchip_usb2phy, clk480m_hw); + + return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl); +} + +static unsigned long +rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 480000000; +} + +static const struct clk_ops rockchip_usb2phy_clkout_ops = { + .prepare = rockchip_usb2phy_clk480m_prepare, + .unprepare = rockchip_usb2phy_clk480m_unprepare, + .is_prepared = rockchip_usb2phy_clk480m_prepared, + .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate, +}; + +static void rockchip_usb2phy_clk480m_unregister(void *data) +{ + struct rockchip_usb2phy *rphy = data; + + of_clk_del_provider(rphy->dev->of_node); + clk_unregister(rphy->clk480m); +} + +static int +rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy) +{ + struct device_node *node = rphy->dev->of_node; + struct clk_init_data init; + const char *clk_name; + int ret; + + init.flags = 0; + init.name = "clk_usbphy_480m"; + init.ops = &rockchip_usb2phy_clkout_ops; + + /* optional override of the clockname */ + of_property_read_string(node, "clock-output-names", &init.name); + + if (rphy->clk) { + clk_name = __clk_get_name(rphy->clk); + init.parent_names = &clk_name; + init.num_parents = 1; + } else { + init.parent_names = NULL; + init.num_parents = 0; + } + + rphy->clk480m_hw.init = &init; + + /* register the clock */ + rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw); + if (IS_ERR(rphy->clk480m)) { + ret = PTR_ERR(rphy->clk480m); + goto err_ret; + } + + ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m); + if (ret < 0) + goto err_clk_provider; + + ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister, + rphy); + if (ret < 0) + goto err_unreg_action; + + return 0; + +err_unreg_action: + of_clk_del_provider(node); +err_clk_provider: + clk_unregister(rphy->clk480m); +err_ret: + return ret; +} + +static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy) +{ + int ret; + struct device_node *node = rphy->dev->of_node; + struct extcon_dev *edev; + + if (of_property_read_bool(node, "extcon")) { + edev = extcon_get_edev_by_phandle(rphy->dev, 0); + if (IS_ERR(edev)) { + if (PTR_ERR(edev) != -EPROBE_DEFER) + dev_err(rphy->dev, "Invalid or missing extcon\n"); + return PTR_ERR(edev); + } + } else { + /* Initialize extcon device */ + edev = devm_extcon_dev_allocate(rphy->dev, + rockchip_usb2phy_extcon_cable); + + if (IS_ERR(edev)) + return -ENOMEM; + + ret = devm_extcon_dev_register(rphy->dev, edev); + if (ret) { + dev_err(rphy->dev, "failed to register extcon device\n"); + return ret; + } + } + + rphy->edev = edev; + + return 0; +} + +static int rockchip_usb2phy_init(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + int ret = 0; + + mutex_lock(&rport->mutex); + + if (rport->port_id == USB2PHY_PORT_OTG) { + if (rport->mode != USB_DR_MODE_HOST && + rport->mode != USB_DR_MODE_UNKNOWN) { + /* clear bvalid status and enable bvalid detect irq */ + ret = property_enable(rphy, + &rport->port_cfg->bvalid_det_clr, + true); + if (ret) + goto out; + + ret = property_enable(rphy, + &rport->port_cfg->bvalid_det_en, + true); + if (ret) + goto out; + + schedule_delayed_work(&rport->otg_sm_work, + OTG_SCHEDULE_DELAY * 3); + } else { + /* If OTG works in host only mode, do nothing. */ + dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode); + } + } else if (rport->port_id == USB2PHY_PORT_HOST) { + /* clear linestate and enable linestate detect irq */ + ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + if (ret) + goto out; + + ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true); + if (ret) + goto out; + + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); + } + +out: + mutex_unlock(&rport->mutex); + return ret; +} + +static int rockchip_usb2phy_power_on(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + int ret; + + dev_dbg(&rport->phy->dev, "port power on\n"); + + if (!rport->suspended) + return 0; + + ret = clk_prepare_enable(rphy->clk480m); + if (ret) + return ret; + + ret = property_enable(rphy, &rport->port_cfg->phy_sus, false); + if (ret) + return ret; + + /* waiting for the utmi_clk to become stable */ + usleep_range(1500, 2000); + + rport->suspended = false; + return 0; +} + +static int rockchip_usb2phy_power_off(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + int ret; + + dev_dbg(&rport->phy->dev, "port power off\n"); + + if (rport->suspended) + return 0; + + ret = property_enable(rphy, &rport->port_cfg->phy_sus, true); + if (ret) + return ret; + + rport->suspended = true; + clk_disable_unprepare(rphy->clk480m); + + return 0; +} + +static int rockchip_usb2phy_exit(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + + if (rport->port_id == USB2PHY_PORT_OTG && + rport->mode != USB_DR_MODE_HOST && + rport->mode != USB_DR_MODE_UNKNOWN) { + cancel_delayed_work_sync(&rport->otg_sm_work); + cancel_delayed_work_sync(&rport->chg_work); + } else if (rport->port_id == USB2PHY_PORT_HOST) + cancel_delayed_work_sync(&rport->sm_work); + + return 0; +} + +static const struct phy_ops rockchip_usb2phy_ops = { + .init = rockchip_usb2phy_init, + .exit = rockchip_usb2phy_exit, + .power_on = rockchip_usb2phy_power_on, + .power_off = rockchip_usb2phy_power_off, + .owner = THIS_MODULE, +}; + +static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, + otg_sm_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + static unsigned int cable; + unsigned long delay; + bool vbus_attach, sch_work, notify_charger; + + if (rport->utmi_avalid) + vbus_attach = + property_enabled(rphy, &rport->port_cfg->utmi_avalid); + else + vbus_attach = + property_enabled(rphy, &rport->port_cfg->utmi_bvalid); + + sch_work = false; + notify_charger = false; + delay = OTG_SCHEDULE_DELAY; + dev_dbg(&rport->phy->dev, "%s otg sm work\n", + usb_otg_state_string(rport->state)); + + switch (rport->state) { + case OTG_STATE_UNDEFINED: + rport->state = OTG_STATE_B_IDLE; + if (!vbus_attach) + rockchip_usb2phy_power_off(rport->phy); + /* fall through */ + case OTG_STATE_B_IDLE: + if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) > 0) { + dev_dbg(&rport->phy->dev, "usb otg host connect\n"); + rport->state = OTG_STATE_A_HOST; + rockchip_usb2phy_power_on(rport->phy); + return; + } else if (vbus_attach) { + dev_dbg(&rport->phy->dev, "vbus_attach\n"); + switch (rphy->chg_state) { + case USB_CHG_STATE_UNDEFINED: + schedule_delayed_work(&rport->chg_work, 0); + return; + case USB_CHG_STATE_DETECTED: + switch (rphy->chg_type) { + case POWER_SUPPLY_TYPE_USB: + dev_dbg(&rport->phy->dev, "sdp cable is connected\n"); + rockchip_usb2phy_power_on(rport->phy); + rport->state = OTG_STATE_B_PERIPHERAL; + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_SDP; + break; + case POWER_SUPPLY_TYPE_USB_DCP: + dev_dbg(&rport->phy->dev, "dcp cable is connected\n"); + rockchip_usb2phy_power_off(rport->phy); + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_DCP; + break; + case POWER_SUPPLY_TYPE_USB_CDP: + dev_dbg(&rport->phy->dev, "cdp cable is connected\n"); + rockchip_usb2phy_power_on(rport->phy); + rport->state = OTG_STATE_B_PERIPHERAL; + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_CDP; + break; + default: + break; + } + break; + default: + break; + } + } else { + notify_charger = true; + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + } + + if (rport->vbus_attached != vbus_attach) { + rport->vbus_attached = vbus_attach; + + if (notify_charger && rphy->edev) { + extcon_set_cable_state_(rphy->edev, + cable, vbus_attach); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(rphy->edev, + EXTCON_USB, + vbus_attach); + } + } + break; + case OTG_STATE_B_PERIPHERAL: + if (!vbus_attach) { + dev_dbg(&rport->phy->dev, "usb disconnect\n"); + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + rport->state = OTG_STATE_B_IDLE; + delay = 0; + rockchip_usb2phy_power_off(rport->phy); + } + sch_work = true; + break; + case OTG_STATE_A_HOST: + if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) == 0) { + dev_dbg(&rport->phy->dev, "usb otg host disconnect\n"); + rport->state = OTG_STATE_B_IDLE; + rockchip_usb2phy_power_off(rport->phy); + } + break; + default: + break; + } + + if (sch_work) + schedule_delayed_work(&rport->otg_sm_work, delay); +} + +static const char *chg_to_string(enum power_supply_type chg_type) +{ + switch (chg_type) { + case POWER_SUPPLY_TYPE_USB: + return "USB_SDP_CHARGER"; + case POWER_SUPPLY_TYPE_USB_DCP: + return "USB_DCP_CHARGER"; + case POWER_SUPPLY_TYPE_USB_CDP: + return "USB_CDP_CHARGER"; + default: + return "INVALID_CHARGER"; + } +} + +static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy, + bool en) +{ + property_enable(rphy, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en); + property_enable(rphy, &rphy->phy_cfg->chg_det.idp_src_en, en); +} + +static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy, + bool en) +{ + property_enable(rphy, &rphy->phy_cfg->chg_det.vdp_src_en, en); + property_enable(rphy, &rphy->phy_cfg->chg_det.idm_sink_en, en); +} + +static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy, + bool en) +{ + property_enable(rphy, &rphy->phy_cfg->chg_det.vdm_src_en, en); + property_enable(rphy, &rphy->phy_cfg->chg_det.idp_sink_en, en); +} + +#define CHG_DCD_POLL_TIME (100 * HZ / 1000) +#define CHG_DCD_MAX_RETRIES 6 +#define CHG_PRIMARY_DET_TIME (40 * HZ / 1000) +#define CHG_SECONDARY_DET_TIME (40 * HZ / 1000) +static void rockchip_chg_detect_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, chg_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + bool is_dcd, tmout, vout; + unsigned long delay; + + dev_dbg(&rport->phy->dev, "chg detection work state = %d\n", + rphy->chg_state); + switch (rphy->chg_state) { + case USB_CHG_STATE_UNDEFINED: + if (!rport->suspended) + rockchip_usb2phy_power_off(rport->phy); + /* put the controller in non-driving mode */ + property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, false); + /* Start DCD processing stage 1 */ + rockchip_chg_enable_dcd(rphy, true); + rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; + rphy->dcd_retries = 0; + delay = CHG_DCD_POLL_TIME; + break; + case USB_CHG_STATE_WAIT_FOR_DCD: + /* get data contact detection status */ + is_dcd = property_enabled(rphy, &rphy->phy_cfg->chg_det.dp_det); + tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES; + /* stage 2 */ + if (is_dcd || tmout) { + /* stage 4 */ + /* Turn off DCD circuitry */ + rockchip_chg_enable_dcd(rphy, false); + /* Voltage Source on DP, Probe on DM */ + rockchip_chg_enable_primary_det(rphy, true); + delay = CHG_PRIMARY_DET_TIME; + rphy->chg_state = USB_CHG_STATE_DCD_DONE; + } else { + /* stage 3 */ + delay = CHG_DCD_POLL_TIME; + } + break; + case USB_CHG_STATE_DCD_DONE: + vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.cp_det); + rockchip_chg_enable_primary_det(rphy, false); + if (vout) { + /* Voltage Source on DM, Probe on DP */ + rockchip_chg_enable_secondary_det(rphy, true); + delay = CHG_SECONDARY_DET_TIME; + rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE; + } else { + if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) { + /* floating charger found */ + rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } else { + rphy->chg_type = POWER_SUPPLY_TYPE_USB; + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } + } + break; + case USB_CHG_STATE_PRIMARY_DONE: + vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.dcp_det); + /* Turn off voltage source */ + rockchip_chg_enable_secondary_det(rphy, false); + if (vout) + rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; + else + rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP; + /* fall through */ + case USB_CHG_STATE_SECONDARY_DONE: + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + /* fall through */ + case USB_CHG_STATE_DETECTED: + /* put the controller in normal mode */ + property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, true); + rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); + dev_info(&rport->phy->dev, "charger = %s\n", + chg_to_string(rphy->chg_type)); + return; + default: + return; + } + + schedule_delayed_work(&rport->chg_work, delay); +} + +/* + * The function manage host-phy port state and suspend/resume phy port + * to save power. + * + * we rely on utmi_linestate and utmi_hostdisconnect to identify whether + * devices is disconnect or not. Besides, we do not need care it is FS/LS + * disconnected or HS disconnected, actually, we just only need get the + * device is disconnected at last through rearm the delayed work, + * to suspend the phy port in _PHY_STATE_DISCONNECT_ case. + * + * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke + * some clk related APIs, so do not invoke it from interrupt context directly. + */ +static void rockchip_usb2phy_sm_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, sm_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + unsigned int sh = rport->port_cfg->utmi_hstdet.bitend - + rport->port_cfg->utmi_hstdet.bitstart + 1; + unsigned int ul, uhd, state; + unsigned int ul_mask, uhd_mask; + int ret; + + mutex_lock(&rport->mutex); + + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul); + if (ret < 0) + goto next_schedule; + + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, + &uhd); + if (ret < 0) + goto next_schedule; + + uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend, + rport->port_cfg->utmi_hstdet.bitstart); + ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend, + rport->port_cfg->utmi_ls.bitstart); + + /* stitch on utmi_ls and utmi_hstdet as phy state */ + state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) | + (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh); + + switch (state) { + case PHY_STATE_HS_ONLINE: + dev_dbg(&rport->phy->dev, "HS online\n"); + break; + case PHY_STATE_FS_LS_ONLINE: + /* + * For FS/LS device, the online state share with connect state + * from utmi_ls and utmi_hstdet register, so we distinguish + * them via suspended flag. + * + * Plus, there are two cases, one is D- Line pull-up, and D+ + * line pull-down, the state is 4; another is D+ line pull-up, + * and D- line pull-down, the state is 2. + */ + if (!rport->suspended) { + /* D- line pull-up, D+ line pull-down */ + dev_dbg(&rport->phy->dev, "FS/LS online\n"); + break; + } + /* fall through */ + case PHY_STATE_CONNECT: + if (rport->suspended) { + dev_dbg(&rport->phy->dev, "Connected\n"); + rockchip_usb2phy_power_on(rport->phy); + rport->suspended = false; + } else { + /* D+ line pull-up, D- line pull-down */ + dev_dbg(&rport->phy->dev, "FS/LS online\n"); + } + break; + case PHY_STATE_DISCONNECT: + if (!rport->suspended) { + dev_dbg(&rport->phy->dev, "Disconnected\n"); + rockchip_usb2phy_power_off(rport->phy); + rport->suspended = true; + } + + /* + * activate the linestate detection to get the next device + * plug-in irq. + */ + property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + property_enable(rphy, &rport->port_cfg->ls_det_en, true); + + /* + * we don't need to rearm the delayed work when the phy port + * is suspended. + */ + mutex_unlock(&rport->mutex); + return; + default: + dev_dbg(&rport->phy->dev, "unknown phy state\n"); + break; + } + +next_schedule: + mutex_unlock(&rport->mutex); + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); +} + +static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data) +{ + struct rockchip_usb2phy_port *rport = data; + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + + if (!property_enabled(rphy, &rport->port_cfg->ls_det_st)) + return IRQ_NONE; + + mutex_lock(&rport->mutex); + + /* disable linestate detect irq and clear its status */ + property_enable(rphy, &rport->port_cfg->ls_det_en, false); + property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + + mutex_unlock(&rport->mutex); + + /* + * In this case for host phy port, a new device is plugged in, + * meanwhile, if the phy port is suspended, we need rearm the work to + * resume it and mange its states; otherwise, we do nothing about that. + */ + if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST) + rockchip_usb2phy_sm_work(&rport->sm_work.work); + + return IRQ_HANDLED; +} + +static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data) +{ + struct rockchip_usb2phy_port *rport = data; + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + + if (!property_enabled(rphy, &rport->port_cfg->bvalid_det_st)) + return IRQ_NONE; + + mutex_lock(&rport->mutex); + + /* clear bvalid detect irq pending status */ + property_enable(rphy, &rport->port_cfg->bvalid_det_clr, true); + + mutex_unlock(&rport->mutex); + + rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); + + return IRQ_HANDLED; +} + +static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy, + struct rockchip_usb2phy_port *rport, + struct device_node *child_np) +{ + int ret; + + rport->port_id = USB2PHY_PORT_HOST; + rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST]; + rport->suspended = true; + + mutex_init(&rport->mutex); + INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work); + + rport->ls_irq = of_irq_get_byname(child_np, "linestate"); + if (rport->ls_irq < 0) { + dev_err(rphy->dev, "no linestate irq provided\n"); + return rport->ls_irq; + } + + ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL, + rockchip_usb2phy_linestate_irq, + IRQF_ONESHOT, + "rockchip_usb2phy", rport); + if (ret) { + dev_err(rphy->dev, "failed to request linestate irq handle\n"); + return ret; + } + + return 0; +} + +static int rockchip_otg_event(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct rockchip_usb2phy_port *rport = + container_of(nb, struct rockchip_usb2phy_port, event_nb); + + schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY); + + return NOTIFY_DONE; +} + +static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, + struct rockchip_usb2phy_port *rport, + struct device_node *child_np) +{ + int ret; + + rport->port_id = USB2PHY_PORT_OTG; + rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; + rport->state = OTG_STATE_UNDEFINED; + + /* + * set suspended flag to true, but actually don't + * put phy in suspend mode, it aims to enable usb + * phy and clock in power_on() called by usb controller + * driver during probe. + */ + rport->suspended = true; + rport->vbus_attached = false; + + mutex_init(&rport->mutex); + + rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1); + if (rport->mode == USB_DR_MODE_HOST || + rport->mode == USB_DR_MODE_UNKNOWN) { + ret = 0; + goto out; + } + + INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work); + INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work); + + rport->utmi_avalid = + of_property_read_bool(child_np, "rockchip,utmi-avalid"); + + rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid"); + if (rport->bvalid_irq < 0) { + dev_err(rphy->dev, "no vbus valid irq provided\n"); + ret = rport->bvalid_irq; + goto out; + } + + ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq, NULL, + rockchip_usb2phy_bvalid_irq, + IRQF_ONESHOT, + "rockchip_usb2phy_bvalid", rport); + if (ret) { + dev_err(rphy->dev, "failed to request otg-bvalid irq handle\n"); + goto out; + } + + if (!IS_ERR(rphy->edev)) { + rport->event_nb.notifier_call = rockchip_otg_event; + + ret = extcon_register_notifier(rphy->edev, EXTCON_USB_HOST, + &rport->event_nb); + if (ret) + dev_err(rphy->dev, "register USB HOST notifier failed\n"); + } + +out: + return ret; +} + +static int rockchip_usb2phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct rockchip_usb2phy *rphy; + const struct rockchip_usb2phy_cfg *phy_cfgs; + const struct of_device_id *match; + unsigned int reg; + int index, ret; + + rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL); + if (!rphy) + return -ENOMEM; + + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) { + dev_err(dev, "phy configs are not assigned!\n"); + return -EINVAL; + } + + if (!dev->parent || !dev->parent->of_node) + return -EINVAL; + + rphy->grf = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(rphy->grf)) + return PTR_ERR(rphy->grf); + + if (of_property_read_u32(np, "reg", ®)) { + dev_err(dev, "the reg property is not assigned in %s node\n", + np->name); + return -EINVAL; + } + + rphy->dev = dev; + phy_cfgs = match->data; + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + platform_set_drvdata(pdev, rphy); + + ret = rockchip_usb2phy_extcon_register(rphy); + if (ret) + return ret; + + /* find out a proper config which can be matched with dt. */ + index = 0; + while (phy_cfgs[index].reg) { + if (phy_cfgs[index].reg == reg) { + rphy->phy_cfg = &phy_cfgs[index]; + break; + } + + ++index; + } + + if (!rphy->phy_cfg) { + dev_err(dev, "no phy-config can be matched with %s node\n", + np->name); + return -EINVAL; + } + + rphy->clk = of_clk_get_by_name(np, "phyclk"); + if (!IS_ERR(rphy->clk)) { + clk_prepare_enable(rphy->clk); + } else { + dev_info(&pdev->dev, "no phyclk specified\n"); + rphy->clk = NULL; + } + + ret = rockchip_usb2phy_clk480m_register(rphy); + if (ret) { + dev_err(dev, "failed to register 480m output clock\n"); + goto disable_clks; + } + + index = 0; + for_each_available_child_of_node(np, child_np) { + struct rockchip_usb2phy_port *rport = &rphy->ports[index]; + struct phy *phy; + + /* This driver aims to support both otg-port and host-port */ + if (of_node_cmp(child_np->name, "host-port") && + of_node_cmp(child_np->name, "otg-port")) + goto next_child; + + phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + ret = PTR_ERR(phy); + goto put_child; + } + + rport->phy = phy; + phy_set_drvdata(rport->phy, rport); + + /* initialize otg/host port separately */ + if (!of_node_cmp(child_np->name, "host-port")) { + ret = rockchip_usb2phy_host_port_init(rphy, rport, + child_np); + if (ret) + goto put_child; + } else { + ret = rockchip_usb2phy_otg_port_init(rphy, rport, + child_np); + if (ret) + goto put_child; + } + +next_child: + /* to prevent out of boundary */ + if (++index >= rphy->phy_cfg->num_ports) + break; + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(provider); + +put_child: + of_node_put(child_np); +disable_clks: + if (rphy->clk) { + clk_disable_unprepare(rphy->clk); + clk_put(rphy->clk); + } + return ret; +} + +static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = { + { + .reg = 0x760, + .num_ports = 2, + .clkout_ctl = { 0x0768, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0760, 15, 0, 0, 0x1d1 }, + .bvalid_det_en = { 0x0680, 3, 3, 0, 1 }, + .bvalid_det_st = { 0x0690, 3, 3, 0, 1 }, + .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 }, + .ls_det_en = { 0x0680, 2, 2, 0, 1 }, + .ls_det_st = { 0x0690, 2, 2, 0, 1 }, + .ls_det_clr = { 0x06a0, 2, 2, 0, 1 }, + .utmi_bvalid = { 0x0480, 4, 4, 0, 1 }, + .utmi_ls = { 0x0480, 3, 2, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0764, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0680, 4, 4, 0, 1 }, + .ls_det_st = { 0x0690, 4, 4, 0, 1 }, + .ls_det_clr = { 0x06a0, 4, 4, 0, 1 } + } + }, + .chg_det = { + .opmode = { 0x0760, 3, 0, 5, 1 }, + .cp_det = { 0x0884, 4, 4, 0, 1 }, + .dcp_det = { 0x0884, 3, 3, 0, 1 }, + .dp_det = { 0x0884, 5, 5, 0, 1 }, + .idm_sink_en = { 0x0768, 8, 8, 0, 1 }, + .idp_sink_en = { 0x0768, 7, 7, 0, 1 }, + .idp_src_en = { 0x0768, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0x0768, 10, 10, 0, 1 }, + .vdm_src_en = { 0x0768, 12, 12, 0, 1 }, + .vdp_src_en = { 0x0768, 11, 11, 0, 1 }, + }, + }, + { + .reg = 0x800, + .num_ports = 2, + .clkout_ctl = { 0x0808, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x800, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0684, 0, 0, 0, 1 }, + .ls_det_st = { 0x0694, 0, 0, 0, 1 }, + .ls_det_clr = { 0x06a4, 0, 0, 0, 1 } + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x804, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0684, 1, 1, 0, 1 }, + .ls_det_st = { 0x0694, 1, 1, 0, 1 }, + .ls_det_clr = { 0x06a4, 1, 1, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = { + { + .reg = 0x100, + .num_ports = 2, + .clkout_ctl = { 0x108, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0100, 15, 0, 0, 0x1d1 }, + .bvalid_det_en = { 0x0110, 2, 2, 0, 1 }, + .bvalid_det_st = { 0x0114, 2, 2, 0, 1 }, + .bvalid_det_clr = { 0x0118, 2, 2, 0, 1 }, + .ls_det_en = { 0x0110, 0, 0, 0, 1 }, + .ls_det_st = { 0x0114, 0, 0, 0, 1 }, + .ls_det_clr = { 0x0118, 0, 0, 0, 1 }, + .utmi_avalid = { 0x0120, 10, 10, 0, 1 }, + .utmi_bvalid = { 0x0120, 9, 9, 0, 1 }, + .utmi_ls = { 0x0120, 5, 4, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x104, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x110, 1, 1, 0, 1 }, + .ls_det_st = { 0x114, 1, 1, 0, 1 }, + .ls_det_clr = { 0x118, 1, 1, 0, 1 }, + .utmi_ls = { 0x120, 17, 16, 0, 1 }, + .utmi_hstdet = { 0x120, 19, 19, 0, 1 } + } + }, + .chg_det = { + .opmode = { 0x0100, 3, 0, 5, 1 }, + .cp_det = { 0x0120, 24, 24, 0, 1 }, + .dcp_det = { 0x0120, 23, 23, 0, 1 }, + .dp_det = { 0x0120, 25, 25, 0, 1 }, + .idm_sink_en = { 0x0108, 8, 8, 0, 1 }, + .idp_sink_en = { 0x0108, 7, 7, 0, 1 }, + .idp_src_en = { 0x0108, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 }, + .vdm_src_en = { 0x0108, 12, 12, 0, 1 }, + .vdp_src_en = { 0x0108, 11, 11, 0, 1 }, + }, + }, + { /* sentinel */ } +}; + +static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = { + { + .reg = 0x700, + .num_ports = 2, + .clkout_ctl = { 0x0724, 15, 15, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0728, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0680, 4, 4, 0, 1 }, + .ls_det_st = { 0x0690, 4, 4, 0, 1 }, + .ls_det_clr = { 0x06a0, 4, 4, 0, 1 }, + .utmi_ls = { 0x049c, 14, 13, 0, 1 }, + .utmi_hstdet = { 0x049c, 12, 12, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = { + { + .reg = 0xe450, + .num_ports = 2, + .clkout_ctl = { 0xe450, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe454, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 }, + .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 6, 6, 0, 1 }, + .ls_det_st = { 0xe3e0, 6, 6, 0, 1 }, + .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 }, + .utmi_ls = { 0xe2ac, 22, 21, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 } + } + }, + .chg_det = { + .opmode = { 0xe454, 3, 0, 5, 1 }, + .cp_det = { 0xe2ac, 2, 2, 0, 1 }, + .dcp_det = { 0xe2ac, 1, 1, 0, 1 }, + .dp_det = { 0xe2ac, 0, 0, 0, 1 }, + .idm_sink_en = { 0xe450, 8, 8, 0, 1 }, + .idp_sink_en = { 0xe450, 7, 7, 0, 1 }, + .idp_src_en = { 0xe450, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0xe450, 10, 10, 0, 1 }, + .vdm_src_en = { 0xe450, 12, 12, 0, 1 }, + .vdp_src_en = { 0xe450, 11, 11, 0, 1 }, + }, + }, + { + .reg = 0xe460, + .num_ports = 2, + .clkout_ctl = { 0xe460, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe464, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 }, + .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 11, 11, 0, 1 }, + .ls_det_st = { 0xe3e0, 11, 11, 0, 1 }, + .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 }, + .utmi_ls = { 0xe2ac, 26, 25, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct of_device_id rockchip_usb2phy_dt_match[] = { + { .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs }, + { .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs }, + { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs }, + { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs }, + {} +}; +MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match); + +static struct platform_driver rockchip_usb2phy_driver = { + .probe = rockchip_usb2phy_probe, + .driver = { + .name = "rockchip-usb2phy", + .of_match_table = rockchip_usb2phy_dt_match, + }, +}; +module_platform_driver(rockchip_usb2phy_driver); + +MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c new file mode 100644 index 000000000000..6904633cad68 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-pcie.c @@ -0,0 +1,346 @@ +/* + * Rockchip PCIe PHY driver + * + * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com> + * Copyright (C) 2016 ROCKCHIP, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> + +/* + * The higher 16-bit of this register is used for write protection + * only if BIT(x + 16) set to 1 the BIT(x) can be written. + */ +#define HIWORD_UPDATE(val, mask, shift) \ + ((val) << (shift) | (mask) << ((shift) + 16)) + +#define PHY_MAX_LANE_NUM 4 +#define PHY_CFG_DATA_SHIFT 7 +#define PHY_CFG_ADDR_SHIFT 1 +#define PHY_CFG_DATA_MASK 0xf +#define PHY_CFG_ADDR_MASK 0x3f +#define PHY_CFG_RD_MASK 0x3ff +#define PHY_CFG_WR_ENABLE 1 +#define PHY_CFG_WR_DISABLE 1 +#define PHY_CFG_WR_SHIFT 0 +#define PHY_CFG_WR_MASK 1 +#define PHY_CFG_PLL_LOCK 0x10 +#define PHY_CFG_CLK_TEST 0x10 +#define PHY_CFG_CLK_SCC 0x12 +#define PHY_CFG_SEPE_RATE BIT(3) +#define PHY_CFG_PLL_100M BIT(3) +#define PHY_PLL_LOCKED BIT(9) +#define PHY_PLL_OUTPUT BIT(10) +#define PHY_LANE_A_STATUS 0x30 +#define PHY_LANE_B_STATUS 0x31 +#define PHY_LANE_C_STATUS 0x32 +#define PHY_LANE_D_STATUS 0x33 +#define PHY_LANE_RX_DET_SHIFT 11 +#define PHY_LANE_RX_DET_TH 0x1 +#define PHY_LANE_IDLE_OFF 0x1 +#define PHY_LANE_IDLE_MASK 0x1 +#define PHY_LANE_IDLE_A_SHIFT 3 +#define PHY_LANE_IDLE_B_SHIFT 4 +#define PHY_LANE_IDLE_C_SHIFT 5 +#define PHY_LANE_IDLE_D_SHIFT 6 + +struct rockchip_pcie_data { + unsigned int pcie_conf; + unsigned int pcie_status; + unsigned int pcie_laneoff; +}; + +struct rockchip_pcie_phy { + struct rockchip_pcie_data *phy_data; + struct regmap *reg_base; + struct reset_control *phy_rst; + struct clk *clk_pciephy_ref; +}; + +static inline void phy_wr_cfg(struct rockchip_pcie_phy *rk_phy, + u32 addr, u32 data) +{ + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(data, + PHY_CFG_DATA_MASK, + PHY_CFG_DATA_SHIFT) | + HIWORD_UPDATE(addr, + PHY_CFG_ADDR_MASK, + PHY_CFG_ADDR_SHIFT)); + udelay(1); + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(PHY_CFG_WR_ENABLE, + PHY_CFG_WR_MASK, + PHY_CFG_WR_SHIFT)); + udelay(1); + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(PHY_CFG_WR_DISABLE, + PHY_CFG_WR_MASK, + PHY_CFG_WR_SHIFT)); +} + +static inline u32 phy_rd_cfg(struct rockchip_pcie_phy *rk_phy, + u32 addr) +{ + u32 val; + + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(addr, + PHY_CFG_RD_MASK, + PHY_CFG_ADDR_SHIFT)); + regmap_read(rk_phy->reg_base, + rk_phy->phy_data->pcie_status, + &val); + return val; +} + +static int rockchip_pcie_phy_power_off(struct phy *phy) +{ + struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); + int err = 0; + + err = reset_control_assert(rk_phy->phy_rst); + if (err) { + dev_err(&phy->dev, "assert phy_rst err %d\n", err); + return err; + } + + return 0; +} + +static int rockchip_pcie_phy_power_on(struct phy *phy) +{ + struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); + int err = 0; + u32 status; + unsigned long timeout; + + err = reset_control_deassert(rk_phy->phy_rst); + if (err) { + dev_err(&phy->dev, "deassert phy_rst err %d\n", err); + return err; + } + + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(PHY_CFG_PLL_LOCK, + PHY_CFG_ADDR_MASK, + PHY_CFG_ADDR_SHIFT)); + + /* + * No documented timeout value for phy operation below, + * so we make it large enough here. And we use loop-break + * method which should not be harmful. + */ + timeout = jiffies + msecs_to_jiffies(1000); + + err = -EINVAL; + while (time_before(jiffies, timeout)) { + regmap_read(rk_phy->reg_base, + rk_phy->phy_data->pcie_status, + &status); + if (status & PHY_PLL_LOCKED) { + dev_dbg(&phy->dev, "pll locked!\n"); + err = 0; + break; + } + msleep(20); + } + + if (err) { + dev_err(&phy->dev, "pll lock timeout!\n"); + goto err_pll_lock; + } + + phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE); + phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M); + + err = -ETIMEDOUT; + while (time_before(jiffies, timeout)) { + regmap_read(rk_phy->reg_base, + rk_phy->phy_data->pcie_status, + &status); + if (!(status & PHY_PLL_OUTPUT)) { + dev_dbg(&phy->dev, "pll output enable done!\n"); + err = 0; + break; + } + msleep(20); + } + + if (err) { + dev_err(&phy->dev, "pll output enable timeout!\n"); + goto err_pll_lock; + } + + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(PHY_CFG_PLL_LOCK, + PHY_CFG_ADDR_MASK, + PHY_CFG_ADDR_SHIFT)); + err = -EINVAL; + while (time_before(jiffies, timeout)) { + regmap_read(rk_phy->reg_base, + rk_phy->phy_data->pcie_status, + &status); + if (status & PHY_PLL_LOCKED) { + dev_dbg(&phy->dev, "pll relocked!\n"); + err = 0; + break; + } + msleep(20); + } + + if (err) { + dev_err(&phy->dev, "pll relock timeout!\n"); + goto err_pll_lock; + } + + return 0; + +err_pll_lock: + reset_control_assert(rk_phy->phy_rst); + return err; +} + +static int rockchip_pcie_phy_init(struct phy *phy) +{ + struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); + int err = 0; + + err = clk_prepare_enable(rk_phy->clk_pciephy_ref); + if (err) { + dev_err(&phy->dev, "Fail to enable pcie ref clock.\n"); + goto err_refclk; + } + + err = reset_control_assert(rk_phy->phy_rst); + if (err) { + dev_err(&phy->dev, "assert phy_rst err %d\n", err); + goto err_reset; + } + + return err; + +err_reset: + clk_disable_unprepare(rk_phy->clk_pciephy_ref); +err_refclk: + return err; +} + +static int rockchip_pcie_phy_exit(struct phy *phy) +{ + struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); + + clk_disable_unprepare(rk_phy->clk_pciephy_ref); + + return 0; +} + +static const struct phy_ops ops = { + .init = rockchip_pcie_phy_init, + .exit = rockchip_pcie_phy_exit, + .power_on = rockchip_pcie_phy_power_on, + .power_off = rockchip_pcie_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct rockchip_pcie_data rk3399_pcie_data = { + .pcie_conf = 0xe220, + .pcie_status = 0xe2a4, + .pcie_laneoff = 0xe214, +}; + +static const struct of_device_id rockchip_pcie_phy_dt_ids[] = { + { + .compatible = "rockchip,rk3399-pcie-phy", + .data = &rk3399_pcie_data, + }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_pcie_phy_dt_ids); + +static int rockchip_pcie_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rockchip_pcie_phy *rk_phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct regmap *grf; + const struct of_device_id *of_id; + + grf = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(grf)) { + dev_err(dev, "Cannot find GRF syscon\n"); + return PTR_ERR(grf); + } + + rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); + if (!rk_phy) + return -ENOMEM; + + of_id = of_match_device(rockchip_pcie_phy_dt_ids, &pdev->dev); + if (!of_id) + return -EINVAL; + + rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data; + rk_phy->reg_base = grf; + + rk_phy->phy_rst = devm_reset_control_get(dev, "phy"); + if (IS_ERR(rk_phy->phy_rst)) { + if (PTR_ERR(rk_phy->phy_rst) != -EPROBE_DEFER) + dev_err(dev, + "missing phy property for reset controller\n"); + return PTR_ERR(rk_phy->phy_rst); + } + + rk_phy->clk_pciephy_ref = devm_clk_get(dev, "refclk"); + if (IS_ERR(rk_phy->clk_pciephy_ref)) { + dev_err(dev, "refclk not found.\n"); + return PTR_ERR(rk_phy->clk_pciephy_ref); + } + + generic_phy = devm_phy_create(dev, dev->of_node, &ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, rk_phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver rockchip_pcie_driver = { + .probe = rockchip_pcie_phy_probe, + .driver = { + .name = "rockchip-pcie-phy", + .of_match_table = rockchip_pcie_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_pcie_driver); + +MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip PCIe PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c new file mode 100644 index 000000000000..7cfb0f8995de --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -0,0 +1,1023 @@ +/* + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd + * Author: Chris Zhong <zyw@rock-chips.com> + * Kever Yang <kever.yang@rock-chips.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * The ROCKCHIP Type-C PHY has two PLL clocks. The first PLL clock + * is used for USB3, the second PLL clock is used for DP. This Type-C PHY has + * 3 working modes: USB3 only mode, DP only mode, and USB3+DP mode. + * At USB3 only mode, both PLL clocks need to be initialized, this allows the + * PHY to switch mode between USB3 and USB3+DP, without disconnecting the USB + * device. + * In The DP only mode, only the DP PLL needs to be powered on, and the 4 lanes + * are all used for DP. + * + * This driver gets extcon cable state and property, then decides which mode to + * select: + * + * 1. USB3 only mode: + * EXTCON_USB or EXTCON_USB_HOST state is true, and + * EXTCON_PROP_USB_SS property is true. + * EXTCON_DISP_DP state is false. + * + * 2. DP only mode: + * EXTCON_DISP_DP state is true, and + * EXTCON_PROP_USB_SS property is false. + * If EXTCON_USB_HOST state is true, it is DP + USB2 mode, since the USB2 phy + * is a separate phy, so this case is still DP only mode. + * + * 3. USB3+DP mode: + * EXTCON_USB_HOST and EXTCON_DISP_DP are both true, and + * EXTCON_PROP_USB_SS property is true. + * + * This Type-C PHY driver supports normal and flip orientation. The orientation + * is reported by the EXTCON_PROP_USB_TYPEC_POLARITY property: true is flip + * orientation, false is normal orientation. + * + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/extcon.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> + +#include <linux/mfd/syscon.h> +#include <linux/phy/phy.h> + +#define CMN_SSM_BANDGAP (0x21 << 2) +#define CMN_SSM_BIAS (0x22 << 2) +#define CMN_PLLSM0_PLLEN (0x29 << 2) +#define CMN_PLLSM0_PLLPRE (0x2a << 2) +#define CMN_PLLSM0_PLLVREF (0x2b << 2) +#define CMN_PLLSM0_PLLLOCK (0x2c << 2) +#define CMN_PLLSM1_PLLEN (0x31 << 2) +#define CMN_PLLSM1_PLLPRE (0x32 << 2) +#define CMN_PLLSM1_PLLVREF (0x33 << 2) +#define CMN_PLLSM1_PLLLOCK (0x34 << 2) +#define CMN_PLLSM1_USER_DEF_CTRL (0x37 << 2) +#define CMN_ICAL_OVRD (0xc1 << 2) +#define CMN_PLL0_VCOCAL_OVRD (0x83 << 2) +#define CMN_PLL0_VCOCAL_INIT (0x84 << 2) +#define CMN_PLL0_VCOCAL_ITER (0x85 << 2) +#define CMN_PLL0_LOCK_REFCNT_START (0x90 << 2) +#define CMN_PLL0_LOCK_PLLCNT_START (0x92 << 2) +#define CMN_PLL0_LOCK_PLLCNT_THR (0x93 << 2) +#define CMN_PLL0_INTDIV (0x94 << 2) +#define CMN_PLL0_FRACDIV (0x95 << 2) +#define CMN_PLL0_HIGH_THR (0x96 << 2) +#define CMN_PLL0_DSM_DIAG (0x97 << 2) +#define CMN_PLL0_SS_CTRL1 (0x98 << 2) +#define CMN_PLL0_SS_CTRL2 (0x99 << 2) +#define CMN_PLL1_VCOCAL_START (0xa1 << 2) +#define CMN_PLL1_VCOCAL_OVRD (0xa3 << 2) +#define CMN_PLL1_VCOCAL_INIT (0xa4 << 2) +#define CMN_PLL1_VCOCAL_ITER (0xa5 << 2) +#define CMN_PLL1_LOCK_REFCNT_START (0xb0 << 2) +#define CMN_PLL1_LOCK_PLLCNT_START (0xb2 << 2) +#define CMN_PLL1_LOCK_PLLCNT_THR (0xb3 << 2) +#define CMN_PLL1_INTDIV (0xb4 << 2) +#define CMN_PLL1_FRACDIV (0xb5 << 2) +#define CMN_PLL1_HIGH_THR (0xb6 << 2) +#define CMN_PLL1_DSM_DIAG (0xb7 << 2) +#define CMN_PLL1_SS_CTRL1 (0xb8 << 2) +#define CMN_PLL1_SS_CTRL2 (0xb9 << 2) +#define CMN_RXCAL_OVRD (0xd1 << 2) +#define CMN_TXPUCAL_CTRL (0xe0 << 2) +#define CMN_TXPUCAL_OVRD (0xe1 << 2) +#define CMN_TXPDCAL_OVRD (0xf1 << 2) +#define CMN_DIAG_PLL0_FBH_OVRD (0x1c0 << 2) +#define CMN_DIAG_PLL0_FBL_OVRD (0x1c1 << 2) +#define CMN_DIAG_PLL0_OVRD (0x1c2 << 2) +#define CMN_DIAG_PLL0_V2I_TUNE (0x1c5 << 2) +#define CMN_DIAG_PLL0_CP_TUNE (0x1c6 << 2) +#define CMN_DIAG_PLL0_LF_PROG (0x1c7 << 2) +#define CMN_DIAG_PLL1_FBH_OVRD (0x1d0 << 2) +#define CMN_DIAG_PLL1_FBL_OVRD (0x1d1 << 2) +#define CMN_DIAG_PLL1_OVRD (0x1d2 << 2) +#define CMN_DIAG_PLL1_V2I_TUNE (0x1d5 << 2) +#define CMN_DIAG_PLL1_CP_TUNE (0x1d6 << 2) +#define CMN_DIAG_PLL1_LF_PROG (0x1d7 << 2) +#define CMN_DIAG_PLL1_PTATIS_TUNE1 (0x1d8 << 2) +#define CMN_DIAG_PLL1_PTATIS_TUNE2 (0x1d9 << 2) +#define CMN_DIAG_PLL1_INCLK_CTRL (0x1da << 2) +#define CMN_DIAG_HSCLK_SEL (0x1e0 << 2) + +#define XCVR_PSM_RCTRL(n) ((0x4001 | ((n) << 9)) << 2) +#define XCVR_PSM_CAL_TMR(n) ((0x4002 | ((n) << 9)) << 2) +#define XCVR_PSM_A0IN_TMR(n) ((0x4003 | ((n) << 9)) << 2) +#define TX_TXCC_CAL_SCLR_MULT(n) ((0x4047 | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_00(n) ((0x404c | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_01(n) ((0x404d | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_10(n) ((0x404e | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_11(n) ((0x404f | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_000(n) ((0x4050 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_001(n) ((0x4051 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_010(n) ((0x4052 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_011(n) ((0x4053 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_100(n) ((0x4054 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_101(n) ((0x4055 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_110(n) ((0x4056 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_111(n) ((0x4057 | ((n) << 9)) << 2) +#define XCVR_DIAG_PLLDRC_CTRL(n) ((0x40e0 | ((n) << 9)) << 2) +#define XCVR_DIAG_BIDI_CTRL(n) ((0x40e8 | ((n) << 9)) << 2) +#define XCVR_DIAG_LANE_FCM_EN_MGN(n) ((0x40f2 | ((n) << 9)) << 2) +#define TX_PSC_A0(n) ((0x4100 | ((n) << 9)) << 2) +#define TX_PSC_A1(n) ((0x4101 | ((n) << 9)) << 2) +#define TX_PSC_A2(n) ((0x4102 | ((n) << 9)) << 2) +#define TX_PSC_A3(n) ((0x4103 | ((n) << 9)) << 2) +#define TX_RCVDET_CTRL(n) ((0x4120 | ((n) << 9)) << 2) +#define TX_RCVDET_EN_TMR(n) ((0x4122 | ((n) << 9)) << 2) +#define TX_RCVDET_ST_TMR(n) ((0x4123 | ((n) << 9)) << 2) +#define TX_DIAG_TX_DRV(n) ((0x41e1 | ((n) << 9)) << 2) +#define TX_DIAG_BGREF_PREDRV_DELAY (0x41e7 << 2) +#define TX_ANA_CTRL_REG_1 (0x5020 << 2) +#define TX_ANA_CTRL_REG_2 (0x5021 << 2) +#define TXDA_COEFF_CALC_CTRL (0x5022 << 2) +#define TX_DIG_CTRL_REG_2 (0x5024 << 2) +#define TXDA_CYA_AUXDA_CYA (0x5025 << 2) +#define TX_ANA_CTRL_REG_3 (0x5026 << 2) +#define TX_ANA_CTRL_REG_4 (0x5027 << 2) +#define TX_ANA_CTRL_REG_5 (0x5029 << 2) + +#define RX_PSC_A0(n) ((0x8000 | ((n) << 9)) << 2) +#define RX_PSC_A1(n) ((0x8001 | ((n) << 9)) << 2) +#define RX_PSC_A2(n) ((0x8002 | ((n) << 9)) << 2) +#define RX_PSC_A3(n) ((0x8003 | ((n) << 9)) << 2) +#define RX_PSC_CAL(n) ((0x8006 | ((n) << 9)) << 2) +#define RX_PSC_RDY(n) ((0x8007 | ((n) << 9)) << 2) +#define RX_IQPI_ILL_CAL_OVRD (0x8023 << 2) +#define RX_EPI_ILL_CAL_OVRD (0x8033 << 2) +#define RX_SDCAL0_OVRD (0x8041 << 2) +#define RX_SDCAL1_OVRD (0x8049 << 2) +#define RX_SLC_INIT (0x806d << 2) +#define RX_SLC_RUN (0x806e << 2) +#define RX_CDRLF_CNFG2 (0x8081 << 2) +#define RX_SIGDET_HL_FILT_TMR(n) ((0x8090 | ((n) << 9)) << 2) +#define RX_SLC_IOP0_OVRD (0x8101 << 2) +#define RX_SLC_IOP1_OVRD (0x8105 << 2) +#define RX_SLC_QOP0_OVRD (0x8109 << 2) +#define RX_SLC_QOP1_OVRD (0x810d << 2) +#define RX_SLC_EOP0_OVRD (0x8111 << 2) +#define RX_SLC_EOP1_OVRD (0x8115 << 2) +#define RX_SLC_ION0_OVRD (0x8119 << 2) +#define RX_SLC_ION1_OVRD (0x811d << 2) +#define RX_SLC_QON0_OVRD (0x8121 << 2) +#define RX_SLC_QON1_OVRD (0x8125 << 2) +#define RX_SLC_EON0_OVRD (0x8129 << 2) +#define RX_SLC_EON1_OVRD (0x812d << 2) +#define RX_SLC_IEP0_OVRD (0x8131 << 2) +#define RX_SLC_IEP1_OVRD (0x8135 << 2) +#define RX_SLC_QEP0_OVRD (0x8139 << 2) +#define RX_SLC_QEP1_OVRD (0x813d << 2) +#define RX_SLC_EEP0_OVRD (0x8141 << 2) +#define RX_SLC_EEP1_OVRD (0x8145 << 2) +#define RX_SLC_IEN0_OVRD (0x8149 << 2) +#define RX_SLC_IEN1_OVRD (0x814d << 2) +#define RX_SLC_QEN0_OVRD (0x8151 << 2) +#define RX_SLC_QEN1_OVRD (0x8155 << 2) +#define RX_SLC_EEN0_OVRD (0x8159 << 2) +#define RX_SLC_EEN1_OVRD (0x815d << 2) +#define RX_REE_CTRL_DATA_MASK(n) ((0x81bb | ((n) << 9)) << 2) +#define RX_DIAG_SIGDET_TUNE(n) ((0x81dc | ((n) << 9)) << 2) +#define RX_DIAG_SC2C_DELAY (0x81e1 << 2) + +#define PMA_LANE_CFG (0xc000 << 2) +#define PIPE_CMN_CTRL1 (0xc001 << 2) +#define PIPE_CMN_CTRL2 (0xc002 << 2) +#define PIPE_COM_LOCK_CFG1 (0xc003 << 2) +#define PIPE_COM_LOCK_CFG2 (0xc004 << 2) +#define PIPE_RCV_DET_INH (0xc005 << 2) +#define DP_MODE_CTL (0xc008 << 2) +#define DP_CLK_CTL (0xc009 << 2) +#define STS (0xc00F << 2) +#define PHY_ISO_CMN_CTRL (0xc010 << 2) +#define PHY_DP_TX_CTL (0xc408 << 2) +#define PMA_CMN_CTRL1 (0xc800 << 2) +#define PHY_PMA_ISO_CMN_CTRL (0xc810 << 2) +#define PHY_ISOLATION_CTRL (0xc81f << 2) +#define PHY_PMA_ISO_XCVR_CTRL(n) ((0xcc11 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_LINK_MODE(n) ((0xcc12 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_PWRST_CTRL(n) ((0xcc13 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_TX_DATA_LO(n) ((0xcc14 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_TX_DATA_HI(n) ((0xcc15 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_RX_DATA_LO(n) ((0xcc16 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_RX_DATA_HI(n) ((0xcc17 | ((n) << 6)) << 2) +#define TX_BIST_CTRL(n) ((0x4140 | ((n) << 9)) << 2) +#define TX_BIST_UDDWR(n) ((0x4141 | ((n) << 9)) << 2) + +/* + * Selects which PLL clock will be driven on the analog high speed + * clock 0: PLL 0 div 1 + * clock 1: PLL 1 div 2 + */ +#define CLK_PLL_CONFIG 0X30 +#define CLK_PLL_MASK 0x33 + +#define CMN_READY BIT(0) + +#define DP_PLL_CLOCK_ENABLE BIT(2) +#define DP_PLL_ENABLE BIT(0) +#define DP_PLL_DATA_RATE_RBR ((2 << 12) | (4 << 8)) +#define DP_PLL_DATA_RATE_HBR ((2 << 12) | (4 << 8)) +#define DP_PLL_DATA_RATE_HBR2 ((1 << 12) | (2 << 8)) + +#define DP_MODE_A0 BIT(4) +#define DP_MODE_A2 BIT(6) +#define DP_MODE_ENTER_A0 0xc101 +#define DP_MODE_ENTER_A2 0xc104 + +#define PHY_MODE_SET_TIMEOUT 100000 + +#define PIN_ASSIGN_C_E 0x51d9 +#define PIN_ASSIGN_D_F 0x5100 + +#define MODE_DISCONNECT 0 +#define MODE_UFP_USB BIT(0) +#define MODE_DFP_USB BIT(1) +#define MODE_DFP_DP BIT(2) + +struct usb3phy_reg { + u32 offset; + u32 enable_bit; + u32 write_enable; +}; + +struct rockchip_usb3phy_port_cfg { + struct usb3phy_reg typec_conn_dir; + struct usb3phy_reg usb3tousb2_en; + struct usb3phy_reg external_psm; + struct usb3phy_reg pipe_status; +}; + +struct rockchip_typec_phy { + struct device *dev; + void __iomem *base; + struct extcon_dev *extcon; + struct regmap *grf_regs; + struct clk *clk_core; + struct clk *clk_ref; + struct reset_control *uphy_rst; + struct reset_control *pipe_rst; + struct reset_control *tcphy_rst; + struct rockchip_usb3phy_port_cfg port_cfgs; + /* mutex to protect access to individual PHYs */ + struct mutex lock; + + bool flip; + u8 mode; +}; + +struct phy_reg { + u16 value; + u32 addr; +}; + +struct phy_reg usb3_pll_cfg[] = { + { 0xf0, CMN_PLL0_VCOCAL_INIT }, + { 0x18, CMN_PLL0_VCOCAL_ITER }, + { 0xd0, CMN_PLL0_INTDIV }, + { 0x4a4a, CMN_PLL0_FRACDIV }, + { 0x34, CMN_PLL0_HIGH_THR }, + { 0x1ee, CMN_PLL0_SS_CTRL1 }, + { 0x7f03, CMN_PLL0_SS_CTRL2 }, + { 0x20, CMN_PLL0_DSM_DIAG }, + { 0, CMN_DIAG_PLL0_OVRD }, + { 0, CMN_DIAG_PLL0_FBH_OVRD }, + { 0, CMN_DIAG_PLL0_FBL_OVRD }, + { 0x7, CMN_DIAG_PLL0_V2I_TUNE }, + { 0x45, CMN_DIAG_PLL0_CP_TUNE }, + { 0x8, CMN_DIAG_PLL0_LF_PROG }, +}; + +struct phy_reg dp_pll_cfg[] = { + { 0xf0, CMN_PLL1_VCOCAL_INIT }, + { 0x18, CMN_PLL1_VCOCAL_ITER }, + { 0x30b9, CMN_PLL1_VCOCAL_START }, + { 0x21c, CMN_PLL1_INTDIV }, + { 0, CMN_PLL1_FRACDIV }, + { 0x5, CMN_PLL1_HIGH_THR }, + { 0x35, CMN_PLL1_SS_CTRL1 }, + { 0x7f1e, CMN_PLL1_SS_CTRL2 }, + { 0x20, CMN_PLL1_DSM_DIAG }, + { 0, CMN_PLLSM1_USER_DEF_CTRL }, + { 0, CMN_DIAG_PLL1_OVRD }, + { 0, CMN_DIAG_PLL1_FBH_OVRD }, + { 0, CMN_DIAG_PLL1_FBL_OVRD }, + { 0x6, CMN_DIAG_PLL1_V2I_TUNE }, + { 0x45, CMN_DIAG_PLL1_CP_TUNE }, + { 0x8, CMN_DIAG_PLL1_LF_PROG }, + { 0x100, CMN_DIAG_PLL1_PTATIS_TUNE1 }, + { 0x7, CMN_DIAG_PLL1_PTATIS_TUNE2 }, + { 0x4, CMN_DIAG_PLL1_INCLK_CTRL }, +}; + +static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy) +{ + u32 i, rdata; + + /* + * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent + * cmn_psm_clk_dig_div = 2, set the clk division to 2 + */ + writel(0x830, tcphy->base + PMA_CMN_CTRL1); + for (i = 0; i < 4; i++) { + /* + * The following PHY configuration assumes a 24 MHz reference + * clock. + */ + writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i)); + writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i)); + writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i)); + } + + rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL); + rdata &= ~CLK_PLL_MASK; + rdata |= CLK_PLL_CONFIG; + writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL); +} + +static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy) +{ + u32 i; + + /* load the configuration of PLL0 */ + for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++) + writel(usb3_pll_cfg[i].value, + tcphy->base + usb3_pll_cfg[i].addr); +} + +static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy) +{ + u32 i; + + /* set the default mode to RBR */ + writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR, + tcphy->base + DP_CLK_CTL); + + /* load the configuration of PLL1 */ + for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++) + writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr); +} + +static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) +{ + writel(0x7799, tcphy->base + TX_PSC_A0(lane)); + writel(0x7798, tcphy->base + TX_PSC_A1(lane)); + writel(0x5098, tcphy->base + TX_PSC_A2(lane)); + writel(0x5098, tcphy->base + TX_PSC_A3(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); + writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); +} + +static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) +{ + writel(0xa6fd, tcphy->base + RX_PSC_A0(lane)); + writel(0xa6fd, tcphy->base + RX_PSC_A1(lane)); + writel(0xa410, tcphy->base + RX_PSC_A2(lane)); + writel(0x2410, tcphy->base + RX_PSC_A3(lane)); + writel(0x23ff, tcphy->base + RX_PSC_CAL(lane)); + writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane)); + writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane)); + writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane)); + writel(0x2010, tcphy->base + RX_PSC_RDY(lane)); + writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); +} + +static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) +{ + u16 rdata; + + writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane)); + writel(0x6799, tcphy->base + TX_PSC_A0(lane)); + writel(0x6798, tcphy->base + TX_PSC_A1(lane)); + writel(0x98, tcphy->base + TX_PSC_A2(lane)); + writel(0x98, tcphy->base + TX_PSC_A3(lane)); + + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane)); + + writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane)); + writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane)); + + rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); + rdata = (rdata & 0x8fff) | 0x6000; + writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); +} + +static inline int property_enable(struct rockchip_typec_phy *tcphy, + const struct usb3phy_reg *reg, bool en) +{ + u32 mask = 1 << reg->write_enable; + u32 val = en << reg->enable_bit; + + return regmap_write(tcphy->grf_regs, reg->offset, val | mask); +} + +static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) +{ + u16 rdata, rdata2, val; + + /* disable txda_cal_latch_en for rewrite the calibration values */ + rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); + val = rdata & 0xdfff; + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + + /* + * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and + * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it + * works. + */ + rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2); + rdata = rdata & 0xffc0; + + rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL); + rdata2 = rdata2 & 0x3f; + + val = rdata | rdata2; + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); + usleep_range(1000, 1050); + + /* + * Enable signal for latch that sample and holds calibration values. + * Activate this signal for 1 clock cycle to sample new calibration + * values. + */ + rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); + val = rdata | 0x2000; + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + usleep_range(150, 200); + + /* set TX Voltage Level and TX Deemphasis to 0 */ + writel(0, tcphy->base + PHY_DP_TX_CTL); + /* re-enable decap */ + writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2); + writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2); + writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1); + writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1); + + writel(0, tcphy->base + TX_ANA_CTRL_REG_5); + + /* + * Programs txda_drv_ldo_prog[15:0], Sets driver LDO + * voltage 16'h1001 for DP-AUX-TX and RX + */ + writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4); + + /* re-enables Bandgap reference for LDO */ + writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1); + writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1); + + /* + * re-enables the transmitter pre-driver, driver data selection MUX, + * and receiver detect circuits. + */ + writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2); + writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2); + + /* + * BIT 12: Controls auxda_polarity, which selects the polarity of the + * xcvr: + * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull + * down aux_m) + * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down + * aux_p) + */ + val = 0xa078; + if (!tcphy->flip) + val |= BIT(12); + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + + writel(0, tcphy->base + TX_ANA_CTRL_REG_3); + writel(0, tcphy->base + TX_ANA_CTRL_REG_4); + writel(0, tcphy->base + TX_ANA_CTRL_REG_5); + + /* + * Controls low_power_swing_en, set the voltage swing of the driver + * to 400mv. The values below are peak to peak (differential) values. + */ + writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL); + writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA); + + /* Controls tx_high_z_tm_en */ + val = readl(tcphy->base + TX_DIG_CTRL_REG_2); + val |= BIT(15); + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); +} + +static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode) +{ + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + int ret, i; + u32 val; + + ret = clk_prepare_enable(tcphy->clk_core); + if (ret) { + dev_err(tcphy->dev, "Failed to prepare_enable core clock\n"); + return ret; + } + + ret = clk_prepare_enable(tcphy->clk_ref); + if (ret) { + dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n"); + goto err_clk_core; + } + + reset_control_deassert(tcphy->tcphy_rst); + + property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip); + + tcphy_cfg_24m(tcphy); + + if (mode == MODE_DFP_DP) { + tcphy_cfg_dp_pll(tcphy); + for (i = 0; i < 4; i++) + tcphy_dp_cfg_lane(tcphy, i); + + writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG); + } else { + tcphy_cfg_usb3_pll(tcphy); + tcphy_cfg_dp_pll(tcphy); + if (tcphy->flip) { + tcphy_tx_usb3_cfg_lane(tcphy, 3); + tcphy_rx_usb3_cfg_lane(tcphy, 2); + tcphy_dp_cfg_lane(tcphy, 0); + tcphy_dp_cfg_lane(tcphy, 1); + } else { + tcphy_tx_usb3_cfg_lane(tcphy, 0); + tcphy_rx_usb3_cfg_lane(tcphy, 1); + tcphy_dp_cfg_lane(tcphy, 2); + tcphy_dp_cfg_lane(tcphy, 3); + } + + writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG); + } + + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); + + reset_control_deassert(tcphy->uphy_rst); + + ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1, + val, val & CMN_READY, 10, + PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + dev_err(tcphy->dev, "wait pma ready timeout\n"); + ret = -ETIMEDOUT; + goto err_wait_pma; + } + + reset_control_deassert(tcphy->pipe_rst); + + return 0; + +err_wait_pma: + reset_control_assert(tcphy->uphy_rst); + reset_control_assert(tcphy->tcphy_rst); + clk_disable_unprepare(tcphy->clk_ref); +err_clk_core: + clk_disable_unprepare(tcphy->clk_core); + return ret; +} + +static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy) +{ + reset_control_assert(tcphy->tcphy_rst); + reset_control_assert(tcphy->uphy_rst); + reset_control_assert(tcphy->pipe_rst); + clk_disable_unprepare(tcphy->clk_core); + clk_disable_unprepare(tcphy->clk_ref); +} + +static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) +{ + struct extcon_dev *edev = tcphy->extcon; + union extcon_property_value property; + unsigned int id; + bool dfp, ufp, dp; + u8 mode; + int ret; + + ufp = extcon_get_state(edev, EXTCON_USB); + dfp = extcon_get_state(edev, EXTCON_USB_HOST); + dp = extcon_get_state(edev, EXTCON_DISP_DP); + + mode = MODE_DFP_USB; + id = EXTCON_USB_HOST; + + if (ufp) { + mode = MODE_UFP_USB; + id = EXTCON_USB; + } else if (dp) { + mode = MODE_DFP_DP; + id = EXTCON_DISP_DP; + + ret = extcon_get_property(edev, id, EXTCON_PROP_USB_SS, + &property); + if (ret) { + dev_err(tcphy->dev, "get superspeed property failed\n"); + return ret; + } + + if (property.intval) + mode |= MODE_DFP_USB; + } + + ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY, + &property); + if (ret) { + dev_err(tcphy->dev, "get polarity property failed\n"); + return ret; + } + + tcphy->flip = property.intval ? 1 : 0; + + return mode; +} + +static int rockchip_usb3_phy_power_on(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + const struct usb3phy_reg *reg = &cfg->pipe_status; + int timeout, new_mode, ret = 0; + u32 val; + + mutex_lock(&tcphy->lock); + + new_mode = tcphy_get_mode(tcphy); + if (new_mode < 0) { + ret = new_mode; + goto unlock_ret; + } + + /* DP-only mode; fall back to USB2 */ + if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) + goto unlock_ret; + + if (tcphy->mode == new_mode) + goto unlock_ret; + + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_init(tcphy, new_mode); + + /* wait TCPHY for pipe ready */ + for (timeout = 0; timeout < 100; timeout++) { + regmap_read(tcphy->grf_regs, reg->offset, &val); + if (!(val & BIT(reg->enable_bit))) { + tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB); + goto unlock_ret; + } + usleep_range(10, 20); + } + + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); + + ret = -ETIMEDOUT; + +unlock_ret: + mutex_unlock(&tcphy->lock); + return ret; +} + +static int rockchip_usb3_phy_power_off(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + + mutex_lock(&tcphy->lock); + + if (tcphy->mode == MODE_DISCONNECT) + goto unlock; + + tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB); + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); + +unlock: + mutex_unlock(&tcphy->lock); + return 0; +} + +static const struct phy_ops rockchip_usb3_phy_ops = { + .power_on = rockchip_usb3_phy_power_on, + .power_off = rockchip_usb3_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_dp_phy_power_on(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + int new_mode, ret = 0; + u32 val; + + mutex_lock(&tcphy->lock); + + new_mode = tcphy_get_mode(tcphy); + if (new_mode < 0) { + ret = new_mode; + goto unlock_ret; + } + + if (!(new_mode & MODE_DFP_DP)) { + ret = -ENODEV; + goto unlock_ret; + } + + if (tcphy->mode == new_mode) + goto unlock_ret; + + /* + * If the PHY has been power on, but the mode is not DP only mode, + * re-init the PHY for setting all of 4 lanes to DP. + */ + if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) { + tcphy_phy_deinit(tcphy); + tcphy_phy_init(tcphy, new_mode); + } else if (tcphy->mode == MODE_DISCONNECT) { + tcphy_phy_init(tcphy, new_mode); + } + + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, + val, val & DP_MODE_A2, 1000, + PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n"); + goto power_on_finish; + } + + tcphy_dp_aux_calibration(tcphy); + + writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL); + + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, + val, val & DP_MODE_A0, 1000, + PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); + dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n"); + goto power_on_finish; + } + + tcphy->mode |= MODE_DFP_DP; + +power_on_finish: + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); +unlock_ret: + mutex_unlock(&tcphy->lock); + return ret; +} + +static int rockchip_dp_phy_power_off(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + + mutex_lock(&tcphy->lock); + + if (tcphy->mode == MODE_DISCONNECT) + goto unlock; + + tcphy->mode &= ~MODE_DFP_DP; + + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); + + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); + +unlock: + mutex_unlock(&tcphy->lock); + return 0; +} + +static const struct phy_ops rockchip_dp_phy_ops = { + .power_on = rockchip_dp_phy_power_on, + .power_off = rockchip_dp_phy_power_off, + .owner = THIS_MODULE, +}; + +static int tcphy_get_param(struct device *dev, + struct usb3phy_reg *reg, + const char *name) +{ + u32 buffer[3]; + int ret; + + ret = of_property_read_u32_array(dev->of_node, name, buffer, 3); + if (ret) { + dev_err(dev, "Can not parse %s\n", name); + return ret; + } + + reg->offset = buffer[0]; + reg->enable_bit = buffer[1]; + reg->write_enable = buffer[2]; + return 0; +} + +static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy, + struct device *dev) +{ + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + int ret; + + ret = tcphy_get_param(dev, &cfg->typec_conn_dir, + "rockchip,typec-conn-dir"); + if (ret) + return ret; + + ret = tcphy_get_param(dev, &cfg->usb3tousb2_en, + "rockchip,usb3tousb2-en"); + if (ret) + return ret; + + ret = tcphy_get_param(dev, &cfg->external_psm, + "rockchip,external-psm"); + if (ret) + return ret; + + ret = tcphy_get_param(dev, &cfg->pipe_status, + "rockchip,pipe-status"); + if (ret) + return ret; + + tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node, + "rockchip,grf"); + if (IS_ERR(tcphy->grf_regs)) { + dev_err(dev, "could not find grf dt node\n"); + return PTR_ERR(tcphy->grf_regs); + } + + tcphy->clk_core = devm_clk_get(dev, "tcpdcore"); + if (IS_ERR(tcphy->clk_core)) { + dev_err(dev, "could not get uphy core clock\n"); + return PTR_ERR(tcphy->clk_core); + } + + tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref"); + if (IS_ERR(tcphy->clk_ref)) { + dev_err(dev, "could not get uphy ref clock\n"); + return PTR_ERR(tcphy->clk_ref); + } + + tcphy->uphy_rst = devm_reset_control_get(dev, "uphy"); + if (IS_ERR(tcphy->uphy_rst)) { + dev_err(dev, "no uphy_rst reset control found\n"); + return PTR_ERR(tcphy->uphy_rst); + } + + tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe"); + if (IS_ERR(tcphy->pipe_rst)) { + dev_err(dev, "no pipe_rst reset control found\n"); + return PTR_ERR(tcphy->pipe_rst); + } + + tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy"); + if (IS_ERR(tcphy->tcphy_rst)) { + dev_err(dev, "no tcphy_rst reset control found\n"); + return PTR_ERR(tcphy->tcphy_rst); + } + + return 0; +} + +static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy) +{ + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + + reset_control_assert(tcphy->tcphy_rst); + reset_control_assert(tcphy->uphy_rst); + reset_control_assert(tcphy->pipe_rst); + + /* select external psm clock */ + property_enable(tcphy, &cfg->external_psm, 1); + property_enable(tcphy, &cfg->usb3tousb2_en, 0); + + tcphy->mode = MODE_DISCONNECT; +} + +static int rockchip_typec_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct rockchip_typec_phy *tcphy; + struct phy_provider *phy_provider; + struct resource *res; + int ret; + + tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL); + if (!tcphy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tcphy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(tcphy->base)) + return PTR_ERR(tcphy->base); + + ret = tcphy_parse_dt(tcphy, dev); + if (ret) + return ret; + + tcphy->dev = dev; + platform_set_drvdata(pdev, tcphy); + mutex_init(&tcphy->lock); + + typec_phy_pre_init(tcphy); + + tcphy->extcon = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(tcphy->extcon)) { + if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER) + dev_err(dev, "Invalid or missing extcon\n"); + return PTR_ERR(tcphy->extcon); + } + + pm_runtime_enable(dev); + + for_each_available_child_of_node(np, child_np) { + struct phy *phy; + + if (!of_node_cmp(child_np->name, "dp-port")) + phy = devm_phy_create(dev, child_np, + &rockchip_dp_phy_ops); + else if (!of_node_cmp(child_np->name, "usb3-port")) + phy = devm_phy_create(dev, child_np, + &rockchip_usb3_phy_ops); + else + continue; + + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy: %s\n", + child_np->name); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, tcphy); + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static int rockchip_typec_phy_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id rockchip_typec_phy_dt_ids[] = { + { .compatible = "rockchip,rk3399-typec-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids); + +static struct platform_driver rockchip_typec_phy_driver = { + .probe = rockchip_typec_phy_probe, + .remove = rockchip_typec_phy_remove, + .driver = { + .name = "rockchip-typec-phy", + .of_match_table = rockchip_typec_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_typec_phy_driver); + +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>"); +MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c new file mode 100644 index 000000000000..3378eeb7a562 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-usb.c @@ -0,0 +1,540 @@ +/* + * Rockchip usb PHY driver + * + * Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com> + * Copyright (C) 2014 ROCKCHIP, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/delay.h> + +static int enable_usb_uart; + +#define HIWORD_UPDATE(val, mask) \ + ((val) | (mask) << 16) + +#define UOC_CON0_SIDDQ BIT(13) + +struct rockchip_usb_phys { + int reg; + const char *pll_name; +}; + +struct rockchip_usb_phy_base; +struct rockchip_usb_phy_pdata { + struct rockchip_usb_phys *phys; + int (*init_usb_uart)(struct regmap *grf); + int usb_uart_phy; +}; + +struct rockchip_usb_phy_base { + struct device *dev; + struct regmap *reg_base; + const struct rockchip_usb_phy_pdata *pdata; +}; + +struct rockchip_usb_phy { + struct rockchip_usb_phy_base *base; + struct device_node *np; + unsigned int reg_offset; + struct clk *clk; + struct clk *clk480m; + struct clk_hw clk480m_hw; + struct phy *phy; + bool uart_enabled; + struct reset_control *reset; + struct regulator *vbus; +}; + +static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, + bool siddq) +{ + u32 val = HIWORD_UPDATE(siddq ? UOC_CON0_SIDDQ : 0, UOC_CON0_SIDDQ); + + return regmap_write(phy->base->reg_base, phy->reg_offset, val); +} + +static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 480000000; +} + +static void rockchip_usb_phy480m_disable(struct clk_hw *hw) +{ + struct rockchip_usb_phy *phy = container_of(hw, + struct rockchip_usb_phy, + clk480m_hw); + + if (phy->vbus) + regulator_disable(phy->vbus); + + /* Power down usb phy analog blocks by set siddq 1 */ + rockchip_usb_phy_power(phy, 1); +} + +static int rockchip_usb_phy480m_enable(struct clk_hw *hw) +{ + struct rockchip_usb_phy *phy = container_of(hw, + struct rockchip_usb_phy, + clk480m_hw); + + /* Power up usb phy analog blocks by set siddq 0 */ + return rockchip_usb_phy_power(phy, 0); +} + +static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw) +{ + struct rockchip_usb_phy *phy = container_of(hw, + struct rockchip_usb_phy, + clk480m_hw); + int ret; + u32 val; + + ret = regmap_read(phy->base->reg_base, phy->reg_offset, &val); + if (ret < 0) + return ret; + + return (val & UOC_CON0_SIDDQ) ? 0 : 1; +} + +static const struct clk_ops rockchip_usb_phy480m_ops = { + .enable = rockchip_usb_phy480m_enable, + .disable = rockchip_usb_phy480m_disable, + .is_enabled = rockchip_usb_phy480m_is_enabled, + .recalc_rate = rockchip_usb_phy480m_recalc_rate, +}; + +static int rockchip_usb_phy_power_off(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + + if (phy->uart_enabled) + return -EBUSY; + + clk_disable_unprepare(phy->clk480m); + + return 0; +} + +static int rockchip_usb_phy_power_on(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + + if (phy->uart_enabled) + return -EBUSY; + + if (phy->vbus) { + int ret; + + ret = regulator_enable(phy->vbus); + if (ret) + return ret; + } + + return clk_prepare_enable(phy->clk480m); +} + +static int rockchip_usb_phy_reset(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + + if (phy->reset) { + reset_control_assert(phy->reset); + udelay(10); + reset_control_deassert(phy->reset); + } + + return 0; +} + +static const struct phy_ops ops = { + .power_on = rockchip_usb_phy_power_on, + .power_off = rockchip_usb_phy_power_off, + .reset = rockchip_usb_phy_reset, + .owner = THIS_MODULE, +}; + +static void rockchip_usb_phy_action(void *data) +{ + struct rockchip_usb_phy *rk_phy = data; + + if (!rk_phy->uart_enabled) { + of_clk_del_provider(rk_phy->np); + clk_unregister(rk_phy->clk480m); + } + + if (rk_phy->clk) + clk_put(rk_phy->clk); +} + +static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, + struct device_node *child) +{ + struct rockchip_usb_phy *rk_phy; + unsigned int reg_offset; + const char *clk_name; + struct clk_init_data init; + int err, i; + + rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL); + if (!rk_phy) + return -ENOMEM; + + rk_phy->base = base; + rk_phy->np = child; + + if (of_property_read_u32(child, "reg", ®_offset)) { + dev_err(base->dev, "missing reg property in node %s\n", + child->name); + return -EINVAL; + } + + rk_phy->reset = of_reset_control_get(child, "phy-reset"); + if (IS_ERR(rk_phy->reset)) + rk_phy->reset = NULL; + + rk_phy->reg_offset = reg_offset; + + rk_phy->clk = of_clk_get_by_name(child, "phyclk"); + if (IS_ERR(rk_phy->clk)) + rk_phy->clk = NULL; + + i = 0; + init.name = NULL; + while (base->pdata->phys[i].reg) { + if (base->pdata->phys[i].reg == reg_offset) { + init.name = base->pdata->phys[i].pll_name; + break; + } + i++; + } + + if (!init.name) { + dev_err(base->dev, "phy data not found\n"); + return -EINVAL; + } + + if (enable_usb_uart && base->pdata->usb_uart_phy == i) { + dev_dbg(base->dev, "phy%d used as uart output\n", i); + rk_phy->uart_enabled = true; + } else { + if (rk_phy->clk) { + clk_name = __clk_get_name(rk_phy->clk); + init.flags = 0; + init.parent_names = &clk_name; + init.num_parents = 1; + } else { + init.flags = 0; + init.parent_names = NULL; + init.num_parents = 0; + } + + init.ops = &rockchip_usb_phy480m_ops; + rk_phy->clk480m_hw.init = &init; + + rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw); + if (IS_ERR(rk_phy->clk480m)) { + err = PTR_ERR(rk_phy->clk480m); + goto err_clk; + } + + err = of_clk_add_provider(child, of_clk_src_simple_get, + rk_phy->clk480m); + if (err < 0) + goto err_clk_prov; + } + + err = devm_add_action_or_reset(base->dev, rockchip_usb_phy_action, + rk_phy); + if (err) + return err; + + rk_phy->phy = devm_phy_create(base->dev, child, &ops); + if (IS_ERR(rk_phy->phy)) { + dev_err(base->dev, "failed to create PHY\n"); + return PTR_ERR(rk_phy->phy); + } + phy_set_drvdata(rk_phy->phy, rk_phy); + + rk_phy->vbus = devm_regulator_get_optional(&rk_phy->phy->dev, "vbus"); + if (IS_ERR(rk_phy->vbus)) { + if (PTR_ERR(rk_phy->vbus) == -EPROBE_DEFER) + return PTR_ERR(rk_phy->vbus); + rk_phy->vbus = NULL; + } + + /* + * When acting as uart-pipe, just keep clock on otherwise + * only power up usb phy when it use, so disable it when init + */ + if (rk_phy->uart_enabled) + return clk_prepare_enable(rk_phy->clk); + else + return rockchip_usb_phy_power(rk_phy, 1); + +err_clk_prov: + if (!rk_phy->uart_enabled) + clk_unregister(rk_phy->clk480m); +err_clk: + if (rk_phy->clk) + clk_put(rk_phy->clk); + return err; +} + +static const struct rockchip_usb_phy_pdata rk3066a_pdata = { + .phys = (struct rockchip_usb_phys[]){ + { .reg = 0x17c, .pll_name = "sclk_otgphy0_480m" }, + { .reg = 0x188, .pll_name = "sclk_otgphy1_480m" }, + { /* sentinel */ } + }, +}; + +static const struct rockchip_usb_phy_pdata rk3188_pdata = { + .phys = (struct rockchip_usb_phys[]){ + { .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" }, + { .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" }, + { /* sentinel */ } + }, +}; + +#define RK3288_UOC0_CON0 0x320 +#define RK3288_UOC0_CON0_COMMON_ON_N BIT(0) +#define RK3288_UOC0_CON0_DISABLE BIT(4) + +#define RK3288_UOC0_CON2 0x328 +#define RK3288_UOC0_CON2_SOFT_CON_SEL BIT(2) + +#define RK3288_UOC0_CON3 0x32c +#define RK3288_UOC0_CON3_UTMI_SUSPENDN BIT(0) +#define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING (1 << 1) +#define RK3288_UOC0_CON3_UTMI_OPMODE_MASK (3 << 1) +#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3) +#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK (3 << 3) +#define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED BIT(5) +#define RK3288_UOC0_CON3_BYPASSDMEN BIT(6) +#define RK3288_UOC0_CON3_BYPASSSEL BIT(7) + +/* + * Enable the bypass of uart2 data through the otg usb phy. + * Original description in the TRM. + * 1. Disable the OTG block by setting OTGDISABLE0 to 1’b1. + * 2. Disable the pull-up resistance on the D+ line by setting + * OPMODE0[1:0] to 2’b01. + * 3. To ensure that the XO, Bias, and PLL blocks are powered down in Suspend + * mode, set COMMONONN to 1’b1. + * 4. Place the USB PHY in Suspend mode by setting SUSPENDM0 to 1’b0. + * 5. Set BYPASSSEL0 to 1’b1. + * 6. To transmit data, controls BYPASSDMEN0, and BYPASSDMDATA0. + * To receive data, monitor FSVPLUS0. + * + * The actual code in the vendor kernel does some things differently. + */ +static int __init rk3288_init_usb_uart(struct regmap *grf) +{ + u32 val; + int ret; + + /* + * COMMON_ON and DISABLE settings are described in the TRM, + * but were not present in the original code. + * Also disable the analog phy components to save power. + */ + val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N + | RK3288_UOC0_CON0_DISABLE + | UOC_CON0_SIDDQ, + RK3288_UOC0_CON0_COMMON_ON_N + | RK3288_UOC0_CON0_DISABLE + | UOC_CON0_SIDDQ); + ret = regmap_write(grf, RK3288_UOC0_CON0, val); + if (ret) + return ret; + + val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL, + RK3288_UOC0_CON2_SOFT_CON_SEL); + ret = regmap_write(grf, RK3288_UOC0_CON2, val); + if (ret) + return ret; + + val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING + | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC + | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED, + RK3288_UOC0_CON3_UTMI_SUSPENDN + | RK3288_UOC0_CON3_UTMI_OPMODE_MASK + | RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK + | RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED); + ret = regmap_write(grf, RK3288_UOC0_CON3, val); + if (ret) + return ret; + + val = HIWORD_UPDATE(RK3288_UOC0_CON3_BYPASSSEL + | RK3288_UOC0_CON3_BYPASSDMEN, + RK3288_UOC0_CON3_BYPASSSEL + | RK3288_UOC0_CON3_BYPASSDMEN); + ret = regmap_write(grf, RK3288_UOC0_CON3, val); + if (ret) + return ret; + + return 0; +} + +static const struct rockchip_usb_phy_pdata rk3288_pdata = { + .phys = (struct rockchip_usb_phys[]){ + { .reg = 0x320, .pll_name = "sclk_otgphy0_480m" }, + { .reg = 0x334, .pll_name = "sclk_otgphy1_480m" }, + { .reg = 0x348, .pll_name = "sclk_otgphy2_480m" }, + { /* sentinel */ } + }, + .init_usb_uart = rk3288_init_usb_uart, + .usb_uart_phy = 0, +}; + +static int rockchip_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rockchip_usb_phy_base *phy_base; + struct phy_provider *phy_provider; + const struct of_device_id *match; + struct device_node *child; + int err; + + phy_base = devm_kzalloc(dev, sizeof(*phy_base), GFP_KERNEL); + if (!phy_base) + return -ENOMEM; + + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) { + dev_err(dev, "missing phy data\n"); + return -EINVAL; + } + + phy_base->pdata = match->data; + + phy_base->dev = dev; + phy_base->reg_base = ERR_PTR(-ENODEV); + if (dev->parent && dev->parent->of_node) + phy_base->reg_base = syscon_node_to_regmap( + dev->parent->of_node); + if (IS_ERR(phy_base->reg_base)) + phy_base->reg_base = syscon_regmap_lookup_by_phandle( + dev->of_node, "rockchip,grf"); + if (IS_ERR(phy_base->reg_base)) { + dev_err(&pdev->dev, "Missing rockchip,grf property\n"); + return PTR_ERR(phy_base->reg_base); + } + + for_each_available_child_of_node(dev->of_node, child) { + err = rockchip_usb_phy_init(phy_base, child); + if (err) { + of_node_put(child); + return err; + } + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id rockchip_usb_phy_dt_ids[] = { + { .compatible = "rockchip,rk3066a-usb-phy", .data = &rk3066a_pdata }, + { .compatible = "rockchip,rk3188-usb-phy", .data = &rk3188_pdata }, + { .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids); + +static struct platform_driver rockchip_usb_driver = { + .probe = rockchip_usb_phy_probe, + .driver = { + .name = "rockchip-usb-phy", + .of_match_table = rockchip_usb_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_usb_driver); + +#ifndef MODULE +static int __init rockchip_init_usb_uart(void) +{ + const struct of_device_id *match; + const struct rockchip_usb_phy_pdata *data; + struct device_node *np; + struct regmap *grf; + int ret; + + if (!enable_usb_uart) + return 0; + + np = of_find_matching_node_and_match(NULL, rockchip_usb_phy_dt_ids, + &match); + if (!np) { + pr_err("%s: failed to find usbphy node\n", __func__); + return -ENOTSUPP; + } + + pr_debug("%s: using settings for %s\n", __func__, match->compatible); + data = match->data; + + if (!data->init_usb_uart) { + pr_err("%s: usb-uart not available on %s\n", + __func__, match->compatible); + return -ENOTSUPP; + } + + grf = ERR_PTR(-ENODEV); + if (np->parent) + grf = syscon_node_to_regmap(np->parent); + if (IS_ERR(grf)) + grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(grf)) { + pr_err("%s: Missing rockchip,grf property, %lu\n", + __func__, PTR_ERR(grf)); + return PTR_ERR(grf); + } + + ret = data->init_usb_uart(grf); + if (ret) { + pr_err("%s: could not init usb_uart, %d\n", __func__, ret); + enable_usb_uart = 0; + return ret; + } + + return 0; +} +early_initcall(rockchip_init_usb_uart); + +static int __init rockchip_usb_uart(char *buf) +{ + enable_usb_uart = true; + return 0; +} +early_param("rockchip.usb_uart", rockchip_usb_uart); +#endif + +MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver"); +MODULE_LICENSE("GPL v2"); |