summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci-acpi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pci-acpi.c')
-rw-r--r--drivers/pci/pci-acpi.c83
1 files changed, 83 insertions, 0 deletions
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index c93fbe76d281..6f6f175f51f7 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -18,6 +18,15 @@
#include <linux/pm_qos.h>
#include "pci.h"
+/*
+ * The UUID is defined in the PCI Firmware Specification available here:
+ * https://www.pcisig.com/members/downloads/pcifw_r3_1_13Dec10.pdf
+ */
+const u8 pci_acpi_dsm_uuid[] = {
+ 0xd0, 0x37, 0xc9, 0xe5, 0x53, 0x35, 0x7a, 0x4d,
+ 0x91, 0x17, 0xea, 0x4d, 0x19, 0xc3, 0x43, 0x4d
+};
+
phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
{
acpi_status status = AE_NOT_EXIST;
@@ -531,11 +540,32 @@ static struct pci_platform_pm_ops acpi_pci_platform_pm = {
void acpi_pci_add_bus(struct pci_bus *bus)
{
+ union acpi_object *obj;
+ struct pci_host_bridge *bridge;
+
if (acpi_pci_disabled || !bus->bridge)
return;
acpi_pci_slot_enumerate(bus);
acpiphp_enumerate_slots(bus);
+
+ /*
+ * For a host bridge, check its _DSM for function 8 and if
+ * that is available, mark it in pci_host_bridge.
+ */
+ if (!pci_is_root_bus(bus))
+ return;
+
+ obj = acpi_evaluate_dsm(ACPI_HANDLE(bus->bridge), pci_acpi_dsm_uuid, 3,
+ RESET_DELAY_DSM, NULL);
+ if (!obj)
+ return;
+
+ if (obj->type == ACPI_TYPE_INTEGER && obj->integer.value == 1) {
+ bridge = pci_find_host_bridge(bus);
+ bridge->ignore_reset_delay = 1;
+ }
+ ACPI_FREE(obj);
}
void acpi_pci_remove_bus(struct pci_bus *bus)
@@ -561,6 +591,57 @@ static struct acpi_device *acpi_pci_find_companion(struct device *dev)
check_children);
}
+/**
+ * pci_acpi_optimize_delay - optimize PCI D3 and D3cold delay from ACPI
+ * @pdev: the PCI device whose delay is to be updated
+ * @adev: the companion ACPI device of this PCI device
+ *
+ * Update the d3_delay and d3cold_delay of a PCI device from the ACPI _DSM
+ * control method of either the device itself or the PCI host bridge.
+ *
+ * Function 8, "Reset Delay," applies to the entire hierarchy below a PCI
+ * host bridge. If it returns one, the OS may assume that all devices in
+ * the hierarchy have already completed power-on reset delays.
+ *
+ * Function 9, "Device Readiness Durations," applies only to the object
+ * where it is located. It returns delay durations required after various
+ * events if the device requires less time than the spec requires. Delays
+ * from this function take precedence over the Reset Delay function.
+ *
+ * These _DSM functions are defined by the draft ECN of January 28, 2014,
+ * titled "ACPI additions for FW latency optimizations."
+ */
+static void pci_acpi_optimize_delay(struct pci_dev *pdev,
+ acpi_handle handle)
+{
+ struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus);
+ int value;
+ union acpi_object *obj, *elements;
+
+ if (bridge->ignore_reset_delay)
+ pdev->d3cold_delay = 0;
+
+ obj = acpi_evaluate_dsm(handle, pci_acpi_dsm_uuid, 3,
+ FUNCTION_DELAY_DSM, NULL);
+ if (!obj)
+ return;
+
+ if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 5) {
+ elements = obj->package.elements;
+ if (elements[0].type == ACPI_TYPE_INTEGER) {
+ value = (int)elements[0].integer.value / 1000;
+ if (value < PCI_PM_D3COLD_WAIT)
+ pdev->d3cold_delay = value;
+ }
+ if (elements[3].type == ACPI_TYPE_INTEGER) {
+ value = (int)elements[3].integer.value / 1000;
+ if (value < PCI_PM_D3_WAIT)
+ pdev->d3_delay = value;
+ }
+ }
+ ACPI_FREE(obj);
+}
+
static void pci_acpi_setup(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -569,6 +650,8 @@ static void pci_acpi_setup(struct device *dev)
if (!adev)
return;
+ pci_acpi_optimize_delay(pci_dev, adev->handle);
+
pci_acpi_add_pm_notifier(adev, pci_dev);
if (!adev->wakeup.flags.valid)
return;