diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 28 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 9 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 304 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 220 |
6 files changed, 570 insertions, 1 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/Makefile b/drivers/net/ethernet/broadcom/bnx2x/Makefile index d862ea699e9f..2ef6803a0fa7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/Makefile +++ b/drivers/net/ethernet/broadcom/bnx2x/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_BNX2X) += bnx2x.o -bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o bnx2x_vfpf.o +bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o bnx2x_vfpf.o bnx2x_sriov.o diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 2fe1908e94d7..027a4a31dd20 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -13,9 +13,12 @@ #ifndef BNX2X_H #define BNX2X_H + +#include <linux/pci.h> #include <linux/netdevice.h> #include <linux/dma-mapping.h> #include <linux/types.h> +#include <linux/pci_regs.h> /* compilation time flags */ @@ -966,6 +969,7 @@ extern struct workqueue_struct *bnx2x_wq; #define BNX2X_MAX_NUM_OF_VFS 64 #define BNX2X_VF_CID_WND 0 #define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND) +#define BNX2X_FIRST_VF_CID 256 #define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF) #define BNX2X_VF_ID_INVALID 0xFF @@ -1117,6 +1121,7 @@ struct hw_context { /* forward */ struct bnx2x_ilt; +struct bnx2x_vfdb; enum bnx2x_recovery_state { BNX2X_RECOVERY_DONE, @@ -1606,6 +1611,9 @@ struct bnx2x { char fw_ver[32]; const struct firmware *firmware; + struct bnx2x_vfdb *vfdb; +#define IS_SRIOV(bp) ((bp)->vfdb) + /* DCB support on/off */ u16 dcb_state; #define BNX2X_DCB_STATE_OFF 0 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index aafcaf610c15..6188ec68b45d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -7270,12 +7270,21 @@ static int bnx2x_init_hw_func(struct bnx2x *bp) ilt = BP_ILT(bp); cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; + if (IS_SRIOV(bp)) + cdu_ilt_start += BNX2X_FIRST_VF_CID/ILT_PAGE_CIDS; + cdu_ilt_start = bnx2x_iov_init_ilt(bp, cdu_ilt_start); + + /* since BNX2X_FIRST_VF_CID > 0 the PF L2 cids precedes + * those of the VFs, so start line should be reset + */ + cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start; for (i = 0; i < L2_ILT_LINES(bp); i++) { ilt->lines[cdu_ilt_start + i].page = bp->context[i].vcxt; ilt->lines[cdu_ilt_start + i].page_mapping = bp->context[i].cxt_mapping; ilt->lines[cdu_ilt_start + i].size = bp->context[i].size; } + bnx2x_ilt_init_op(bp, INITOP_SET); if (!CONFIGURE_NIC_MODE(bp)) { @@ -7881,6 +7890,8 @@ int bnx2x_set_int_mode(struct bnx2x *bp) /* must be called prior to any HW initializations */ static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp) { + if (IS_SRIOV(bp)) + return (BNX2X_FIRST_VF_CID + BNX2X_VF_CIDS)/ILT_PAGE_CIDS; return L2_ILT_LINES(bp); } @@ -12106,8 +12117,12 @@ static int bnx2x_set_qm_cid_count(struct bnx2x *bp) { int cid_count = BNX2X_L2_MAX_CID(bp); + if (IS_SRIOV(bp)) + cid_count += BNX2X_VF_CIDS; + if (CNIC_SUPPORT(bp)) cid_count += CNIC_CID_MAX; + return roundup(cid_count, QM_CID_ROUND); } @@ -12312,6 +12327,16 @@ static int bnx2x_init_one(struct pci_dev *pdev, goto init_one_exit; } + /* Enable SRIOV if capability found in configuration space. + * Once the generic SR-IOV framework makes it in from the + * pci tree this will be revised, to allow dynamic control + * over the number of VFs. Right now, change the num of vfs + * param below to enable SR-IOV. + */ + rc = bnx2x_iov_init_one(bp, int_mode, 0/*num vfs*/); + if (rc) + goto init_one_exit; + /* calc qm_cid_count */ bp->qm_cid_count = bnx2x_set_qm_cid_count(bp); BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count); @@ -12435,6 +12460,9 @@ static void bnx2x_remove_one(struct pci_dev *pdev) /* Make sure RESET task is not scheduled before continuing */ cancel_delayed_work_sync(&bp->sp_rtnl_task); + + bnx2x_iov_remove_one(bp); + /* send message via vfpf channel to release the resources of this vf */ if (IS_VF(bp)) bnx2x_vfpf_release(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 3f01526dec2a..00e439891241 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6305,6 +6305,15 @@ #define PCI_PM_DATA_B 0x414 #define PCI_ID_VAL1 0x434 #define PCI_ID_VAL2 0x438 +#define GRC_CONFIG_REG_PF_INIT_VF 0x624 +#define GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK 0xf +/* First VF_NUM for PF is encoded in this register. + * The number of VFs assigned to a PF is assumed to be a multiple of 8. + * Software should program these bits based on Total Number of VFs \ + * programmed for each PF. + * Since registers from 0x000-0x7ff are split across functions, each PF will + * have the same location for the same 4 bits + */ #define PXPCS_TL_CONTROL_5 0x814 #define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN (1 << 29) /*WC*/ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c new file mode 100644 index 000000000000..f92bf8b738fb --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -0,0 +1,304 @@ +/* bnx2x_sriov.c: Broadcom Everest network driver. + * + * Copyright 2009-2012 Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a + * license other than the GPL, without Broadcom's express prior written + * consent. + * + * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Written by: Shmulik Ravid <shmulikr@broadcom.com> + * Ariel Elior <ariele@broadcom.com> + * + */ +#include "bnx2x.h" +#include "bnx2x_init.h" +#include "bnx2x_sriov.h" +int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid) +{ + int idx; + + for_each_vf(bp, idx) + if (bnx2x_vf(bp, idx, abs_vfid) == abs_vfid) + break; + return idx; +} + +static +struct bnx2x_virtf *bnx2x_vf_by_abs_fid(struct bnx2x *bp, u16 abs_vfid) +{ + u16 idx = (u16)bnx2x_vf_idx_by_abs_fid(bp, abs_vfid); + return (idx < BNX2X_NR_VIRTFN(bp)) ? BP_VF(bp, idx) : NULL; +} + +static int bnx2x_ari_enabled(struct pci_dev *dev) +{ + return dev->bus->self && dev->bus->self->ari_enabled; +} + +static void +bnx2x_vf_set_igu_info(struct bnx2x *bp, u8 igu_sb_id, u8 abs_vfid) +{ + struct bnx2x_virtf *vf = bnx2x_vf_by_abs_fid(bp, abs_vfid); + if (vf) { + if (!vf_sb_count(vf)) + vf->igu_base_id = igu_sb_id; + ++vf_sb_count(vf); + } +} + +static void +bnx2x_get_vf_igu_cam_info(struct bnx2x *bp) +{ + int sb_id; + u32 val; + u8 fid; + + /* IGU in normal mode - read CAM */ + for (sb_id = 0; sb_id < IGU_REG_MAPPING_MEMORY_SIZE; sb_id++) { + val = REG_RD(bp, IGU_REG_MAPPING_MEMORY + sb_id * 4); + if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) + continue; + fid = GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID); + if (!(fid & IGU_FID_ENCODE_IS_PF)) + bnx2x_vf_set_igu_info(bp, sb_id, + (fid & IGU_FID_VF_NUM_MASK)); + + DP(BNX2X_MSG_IOV, "%s[%d], igu_sb_id=%d, msix=%d\n", + ((fid & IGU_FID_ENCODE_IS_PF) ? "PF" : "VF"), + ((fid & IGU_FID_ENCODE_IS_PF) ? (fid & IGU_FID_PF_NUM_MASK) : + (fid & IGU_FID_VF_NUM_MASK)), sb_id, + GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)); + } +} + +static void __bnx2x_iov_free_vfdb(struct bnx2x *bp) +{ + if (bp->vfdb) { + kfree(bp->vfdb->vfqs); + kfree(bp->vfdb->vfs); + kfree(bp->vfdb); + } + bp->vfdb = NULL; +} + +static int bnx2x_sriov_pci_cfg_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +{ + int pos; + struct pci_dev *dev = bp->pdev; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); + if (!pos) { + BNX2X_ERR("failed to find SRIOV capability in device\n"); + return -ENODEV; + } + + iov->pos = pos; + DP(BNX2X_MSG_IOV, "sriov ext pos %d\n", pos); + pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &iov->ctrl); + pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &iov->total); + pci_read_config_word(dev, pos + PCI_SRIOV_INITIAL_VF, &iov->initial); + pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &iov->offset); + pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &iov->stride); + pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &iov->pgsz); + pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap); + pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link); + + return 0; +} + +static int bnx2x_sriov_info(struct bnx2x *bp, struct bnx2x_sriov *iov) +{ + u32 val; + + /* read the SRIOV capability structure + * The fields can be read via configuration read or + * directly from the device (starting at offset PCICFG_OFFSET) + */ + if (bnx2x_sriov_pci_cfg_info(bp, iov)) + return -ENODEV; + + /* get the number of SRIOV bars */ + iov->nres = 0; + + /* read the first_vfid */ + val = REG_RD(bp, PCICFG_OFFSET + GRC_CONFIG_REG_PF_INIT_VF); + iov->first_vf_in_pf = ((val & GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK) + * 8) - (BNX2X_MAX_NUM_OF_VFS * BP_PATH(bp)); + + DP(BNX2X_MSG_IOV, + "IOV info[%d]: first vf %d, nres %d, cap 0x%x, ctrl 0x%x, total %d, initial %d, num vfs %d, offset %d, stride %d, page size 0x%x\n", + BP_FUNC(bp), + iov->first_vf_in_pf, iov->nres, iov->cap, iov->ctrl, iov->total, + iov->initial, iov->nr_virtfn, iov->offset, iov->stride, iov->pgsz); + + return 0; +} + +static u8 bnx2x_iov_get_max_queue_count(struct bnx2x *bp) +{ + int i; + u8 queue_count = 0; + + if (IS_SRIOV(bp)) + for_each_vf(bp, i) + queue_count += bnx2x_vf(bp, i, alloc_resc.num_sbs); + + return queue_count; +} + +/* must be called after PF bars are mapped */ +int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, + int num_vfs_param) +{ + int err, i, qcount; + struct bnx2x_sriov *iov; + struct pci_dev *dev = bp->pdev; + + bp->vfdb = NULL; + + /* verify sriov capability is present in configuration space */ + if (!pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV)) { + DP(BNX2X_MSG_IOV, "no sriov - capability not found\n"); + return 0; + } + + /* verify is pf */ + if (IS_VF(bp)) + return 0; + + /* verify chip revision */ + if (CHIP_IS_E1x(bp)) + return 0; + + /* check if SRIOV support is turned off */ + if (!num_vfs_param) + return 0; + + /* SRIOV assumes that num of PF CIDs < BNX2X_FIRST_VF_CID */ + if (BNX2X_L2_MAX_CID(bp) >= BNX2X_FIRST_VF_CID) { + BNX2X_ERR("PF cids %d are overspilling into vf space (starts at %d). Abort SRIOV\n", + BNX2X_L2_MAX_CID(bp), BNX2X_FIRST_VF_CID); + return 0; + } + + /* SRIOV can be enabled only with MSIX */ + if (int_mode_param == BNX2X_INT_MODE_MSI || + int_mode_param == BNX2X_INT_MODE_INTX) { + BNX2X_ERR("Forced MSI/INTx mode is incompatible with SRIOV\n"); + return 0; + } + + /* verify ari is enabled */ + if (!bnx2x_ari_enabled(bp->pdev)) { + BNX2X_ERR("ARI not supported, SRIOV can not be enabled\n"); + return 0; + } + + /* verify igu is in normal mode */ + if (CHIP_INT_MODE_IS_BC(bp)) { + BNX2X_ERR("IGU not normal mode, SRIOV can not be enabled\n"); + return 0; + } + + /* allocate the vfs database */ + bp->vfdb = kzalloc(sizeof(*(bp->vfdb)), GFP_KERNEL); + if (!bp->vfdb) { + BNX2X_ERR("failed to allocate vf database\n"); + err = -ENOMEM; + goto failed; + } + + /* get the sriov info - Linux already collected all the pertinent + * information, however the sriov structure is for the private use + * of the pci module. Also we want this information regardless + * of the hyper-visor. + */ + iov = &(bp->vfdb->sriov); + err = bnx2x_sriov_info(bp, iov); + if (err) + goto failed; + + /* SR-IOV capability was enabled but there are no VFs*/ + if (iov->total == 0) + goto failed; + + /* calcuate the actual number of VFs */ + iov->nr_virtfn = min_t(u16, iov->total, (u16)num_vfs_param); + + /* allcate the vf array */ + bp->vfdb->vfs = kzalloc(sizeof(struct bnx2x_virtf) * + BNX2X_NR_VIRTFN(bp), GFP_KERNEL); + if (!bp->vfdb->vfs) { + BNX2X_ERR("failed to allocate vf array\n"); + err = -ENOMEM; + goto failed; + } + + /* Initial VF init - index and abs_vfid - nr_virtfn must be set */ + for_each_vf(bp, i) { + bnx2x_vf(bp, i, index) = i; + bnx2x_vf(bp, i, abs_vfid) = iov->first_vf_in_pf + i; + bnx2x_vf(bp, i, state) = VF_FREE; + INIT_LIST_HEAD(&bnx2x_vf(bp, i, op_list_head)); + mutex_init(&bnx2x_vf(bp, i, op_mutex)); + bnx2x_vf(bp, i, op_current) = CHANNEL_TLV_NONE; + } + + /* re-read the IGU CAM for VFs - index and abs_vfid must be set */ + bnx2x_get_vf_igu_cam_info(bp); + + /* get the total queue count and allocate the global queue arrays */ + qcount = bnx2x_iov_get_max_queue_count(bp); + + /* allocate the queue arrays for all VFs */ + bp->vfdb->vfqs = kzalloc(qcount * sizeof(struct bnx2x_vf_queue), + GFP_KERNEL); + if (!bp->vfdb->vfqs) { + BNX2X_ERR("failed to allocate vf queue array\n"); + err = -ENOMEM; + goto failed; + } + + return 0; +failed: + DP(BNX2X_MSG_IOV, "Failed err=%d\n", err); + __bnx2x_iov_free_vfdb(bp); + return err; +} + +/* called by bnx2x_init_hw_func, returns the next ilt line */ +int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line) +{ + int i; + struct bnx2x_ilt *ilt = BP_ILT(bp); + + if (!IS_SRIOV(bp)) + return line; + + /* set vfs ilt lines */ + for (i = 0; i < BNX2X_VF_CIDS/ILT_PAGE_CIDS; i++) { + struct hw_dma *hw_cxt = BP_VF_CXT_PAGE(bp, i); + + ilt->lines[line+i].page = hw_cxt->addr; + ilt->lines[line+i].page_mapping = hw_cxt->mapping; + ilt->lines[line+i].size = hw_cxt->size; /* doesn't matter */ + } + return line + i; +} + +void bnx2x_iov_remove_one(struct bnx2x *bp) +{ + /* if SRIOV is not enabled there's nothing to do */ + if (!IS_SRIOV(bp)) + return; + + /* free vf database */ + __bnx2x_iov_free_vfdb(bp); +} diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 6d0df334124a..97275aa08ca9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -19,11 +19,231 @@ #ifndef BNX2X_SRIOV_H #define BNX2X_SRIOV_H +/* The bnx2x device structure holds vfdb structure described below. + * The VF array is indexed by the relative vfid. + */ +struct bnx2x_sriov { + u32 first_vf_in_pf; + + /* standard SRIOV capability fields, mostly for debugging */ + int pos; /* capability position */ + int nres; /* number of resources */ + u32 cap; /* SR-IOV Capabilities */ + u16 ctrl; /* SR-IOV Control */ + u16 total; /* total VFs associated with the PF */ + u16 initial; /* initial VFs associated with the PF */ + u16 nr_virtfn; /* number of VFs available */ + u16 offset; /* first VF Routing ID offset */ + u16 stride; /* following VF stride */ + u32 pgsz; /* page size for BAR alignment */ + u8 link; /* Function Dependency Link */ +}; + +/* bars */ +struct bnx2x_vf_bar { + u64 bar; + u32 size; +}; + +/* vf queue (used both for rx or tx) */ +struct bnx2x_vf_queue { + struct eth_context *cxt; + + /* MACs object */ + struct bnx2x_vlan_mac_obj mac_obj; + + /* VLANs object */ + struct bnx2x_vlan_mac_obj vlan_obj; + atomic_t vlan_count; /* 0 means vlan-0 is set ~ untagged */ + + /* Queue Slow-path State object */ + struct bnx2x_queue_sp_obj sp_obj; + + u32 cid; + u16 index; + u16 sb_idx; +}; + +/* struct bnx2x_vfop_qctor_params - prepare queue construction parameters: + * q-init, q-setup and SB index + */ +struct bnx2x_vfop_qctor_params { + struct bnx2x_queue_state_params qstate; + struct bnx2x_queue_setup_params prep_qsetup; +}; + +/* VFOP parameters (one copy per VF) */ +union bnx2x_vfop_params { + struct bnx2x_vlan_mac_ramrod_params vlan_mac; + struct bnx2x_rx_mode_ramrod_params rx_mode; + struct bnx2x_mcast_ramrod_params mcast; + struct bnx2x_config_rss_params rss; + struct bnx2x_vfop_qctor_params qctor; +}; + +/* forward */ +struct bnx2x_virtf; +/* vf context */ +struct bnx2x_virtf { + u16 cfg_flags; +#define VF_CFG_STATS 0x0001 +#define VF_CFG_FW_FC 0x0002 +#define VF_CFG_TPA 0x0004 +#define VF_CFG_INT_SIMD 0x0008 +#define VF_CACHE_LINE 0x0010 + + u8 state; +#define VF_FREE 0 /* VF ready to be acquired holds no resc */ +#define VF_ACQUIRED 1 /* VF aquired, but not initalized */ +#define VF_ENABLED 2 /* VF Enabled */ +#define VF_RESET 3 /* VF FLR'd, pending cleanup */ + + /* non 0 during flr cleanup */ + u8 flr_clnup_stage; +#define VF_FLR_CLN 1 /* reclaim resources and do 'final cleanup' + * sans the end-wait + */ +#define VF_FLR_ACK 2 /* ACK flr notification */ +#define VF_FLR_EPILOG 3 /* wait for VF remnants to dissipate in the HW + * ~ final cleanup' end wait + */ + + /* dma */ + dma_addr_t fw_stat_map; /* valid iff VF_CFG_STATS */ + dma_addr_t spq_map; + dma_addr_t bulletin_map; + + /* Allocated resources counters. Before the VF is acquired, the + * counters hold the following values: + * + * - xxq_count = 0 as the queues memory is not allocated yet. + * + * - sb_count = The number of status blocks configured for this VF in + * the IGU CAM. Initially read during probe. + * + * - xx_rules_count = The number of rules statically and equally + * allocated for each VF, during PF load. + */ + struct vf_pf_resc_request alloc_resc; +#define vf_rxq_count(vf) ((vf)->alloc_resc.num_rxqs) +#define vf_txq_count(vf) ((vf)->alloc_resc.num_txqs) +#define vf_sb_count(vf) ((vf)->alloc_resc.num_sbs) +#define vf_mac_rules_cnt(vf) ((vf)->alloc_resc.num_mac_filters) +#define vf_vlan_rules_cnt(vf) ((vf)->alloc_resc.num_vlan_filters) +#define vf_mc_rules_cnt(vf) ((vf)->alloc_resc.num_mc_filters) + + u8 sb_count; /* actual number of SBs */ + u8 igu_base_id; /* base igu status block id */ + + struct bnx2x_vf_queue *vfqs; +#define bnx2x_vfq(vf, nr, var) ((vf)->vfqs[(nr)].var) + + u8 index; /* index in the vf array */ + u8 abs_vfid; + u8 sp_cl_id; + u32 error; /* 0 means all's-well */ + + /* BDF */ + unsigned int bus; + unsigned int devfn; + + /* bars */ + struct bnx2x_vf_bar bars[PCI_SRIOV_NUM_BARS]; + + /* set-mac ramrod state 1-pending, 0-done */ + unsigned long filter_state; + + /* leading rss client id ~~ the client id of the first rxq, must be + * set for each txq. + */ + int leading_rss; + + /* MCAST object */ + struct bnx2x_mcast_obj mcast_obj; + + /* RSS configuration object */ + struct bnx2x_rss_config_obj rss_conf_obj; + + /* slow-path operations */ + atomic_t op_in_progress; + int op_rc; + bool op_wait_blocking; + struct list_head op_list_head; + union bnx2x_vfop_params op_params; + struct mutex op_mutex; /* one vfop at a time mutex */ + enum channel_tlvs op_current; +}; + +#define BNX2X_NR_VIRTFN(bp) ((bp)->vfdb->sriov.nr_virtfn) + +#define for_each_vf(bp, var) \ + for ((var) = 0; (var) < BNX2X_NR_VIRTFN(bp); (var)++) + struct bnx2x_vf_mbx_msg { union vfpf_tlvs req; union pfvf_tlvs resp; }; +struct bnx2x_vf_mbx { + struct bnx2x_vf_mbx_msg *msg; + dma_addr_t msg_mapping; + + /* VF GPA address */ + u32 vf_addr_lo; + u32 vf_addr_hi; + + struct vfpf_first_tlv first_tlv; /* saved VF request header */ + + u8 flags; +#define VF_MSG_INPROCESS 0x1 /* failsafe - the FW should prevent + * more then one pending msg + */ +}; + +struct hw_dma { + void *addr; + dma_addr_t mapping; + size_t size; +}; + +struct bnx2x_vfdb { +#define BP_VFDB(bp) ((bp)->vfdb) + /* vf array */ + struct bnx2x_virtf *vfs; +#define BP_VF(bp, idx) (&((bp)->vfdb->vfs[(idx)])) +#define bnx2x_vf(bp, idx, var) ((bp)->vfdb->vfs[(idx)].var) + + /* queue array - for all vfs */ + struct bnx2x_vf_queue *vfqs; + + /* vf HW contexts */ + struct hw_dma context[BNX2X_VF_CIDS/ILT_PAGE_CIDS]; +#define BP_VF_CXT_PAGE(bp, i) (&(bp)->vfdb->context[(i)]) + + /* SR-IOV information */ + struct bnx2x_sriov sriov; + struct hw_dma mbx_dma; +#define BP_VF_MBX_DMA(bp) (&((bp)->vfdb->mbx_dma)) + struct bnx2x_vf_mbx mbxs[BNX2X_MAX_NUM_OF_VFS]; +#define BP_VF_MBX(bp, vfid) (&((bp)->vfdb->mbxs[(vfid)])) + + struct hw_dma sp_dma; +#define bnx2x_vf_sp(bp, vf, field) ((bp)->vfdb->sp_dma.addr + \ + (vf)->index * sizeof(struct bnx2x_vf_sp) + \ + offsetof(struct bnx2x_vf_sp, field)) +#define bnx2x_vf_sp_map(bp, vf, field) ((bp)->vfdb->sp_dma.mapping + \ + (vf)->index * sizeof(struct bnx2x_vf_sp) + \ + offsetof(struct bnx2x_vf_sp, field)) + +#define FLRD_VFS_DWORDS (BNX2X_MAX_NUM_OF_VFS / 32) + u32 flrd_vfs[FLRD_VFS_DWORDS]; +}; + +/* global iov routines */ +int bnx2x_iov_init_ilt(struct bnx2x *bp, u16 line); +int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, int num_vfs_param); +void bnx2x_iov_remove_one(struct bnx2x *bp); +int bnx2x_vf_idx_by_abs_fid(struct bnx2x *bp, u16 abs_vfid); void bnx2x_add_tlv(struct bnx2x *bp, void *tlvs_list, u16 offset, u16 type, u16 length); void bnx2x_vfpf_prep(struct bnx2x *bp, struct vfpf_first_tlv *first_tlv, |