diff options
Diffstat (limited to 'drivers/net/wireless/mwifiex/scan.c')
| -rw-r--r-- | drivers/net/wireless/mwifiex/scan.c | 191 |
1 files changed, 185 insertions, 6 deletions
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 3633347f50f6..c548a7d4877d 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -595,7 +595,7 @@ mwifiex_scan_channel_list(struct mwifiex_private *priv, struct mwifiex_chan_scan_param_set *tmp_chan_list; struct mwifiex_chan_scan_param_set *start_chan; - u32 tlv_idx, rates_size; + u32 tlv_idx, rates_size, cmd_no; u32 total_scan_time; u32 done_early; u8 radio_type; @@ -733,9 +733,13 @@ mwifiex_scan_channel_list(struct mwifiex_private *priv, /* Send the scan command to the firmware with the specified cfg */ - ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11_SCAN, - HostCmd_ACT_GEN_SET, 0, - scan_cfg_out); + if (priv->adapter->ext_scan) + cmd_no = HostCmd_CMD_802_11_SCAN_EXT; + else + cmd_no = HostCmd_CMD_802_11_SCAN; + + ret = mwifiex_send_cmd_async(priv, cmd_no, HostCmd_ACT_GEN_SET, + 0, scan_cfg_out); /* rate IE is updated per scan command but same starting * pointer is used each time so that rate IE from earlier @@ -786,6 +790,7 @@ mwifiex_config_scan(struct mwifiex_private *priv, struct mwifiex_adapter *adapter = priv->adapter; struct mwifiex_ie_types_num_probes *num_probes_tlv; struct mwifiex_ie_types_wildcard_ssid_params *wildcard_ssid_tlv; + struct mwifiex_ie_types_bssid_list *bssid_tlv; u8 *tlv_pos; u32 num_probes; u32 ssid_len; @@ -848,6 +853,17 @@ mwifiex_config_scan(struct mwifiex_private *priv, user_scan_in->specific_bssid, sizeof(scan_cfg_out->specific_bssid)); + if (adapter->ext_scan && + !is_zero_ether_addr(scan_cfg_out->specific_bssid)) { + bssid_tlv = + (struct mwifiex_ie_types_bssid_list *)tlv_pos; + bssid_tlv->header.type = cpu_to_le16(TLV_TYPE_BSSID); + bssid_tlv->header.len = cpu_to_le16(ETH_ALEN); + memcpy(bssid_tlv->bssid, user_scan_in->specific_bssid, + ETH_ALEN); + tlv_pos += sizeof(struct mwifiex_ie_types_bssid_list); + } + for (i = 0; i < user_scan_in->num_ssids; i++) { ssid_len = user_scan_in->ssid_list[i].ssid_len; @@ -1579,7 +1595,7 @@ done: static int mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info, u32 *bytes_left, u64 fw_tsf, u8 *radio_type, - bool ext_scan) + bool ext_scan, s32 rssi_val) { struct mwifiex_adapter *adapter = priv->adapter; struct mwifiex_chan_freq_power *cfp; @@ -1642,6 +1658,8 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info, current_ptr += sizeof(u8); curr_bcn_bytes -= sizeof(u8); dev_dbg(adapter->dev, "info: InterpretIE: RSSI=%d\n", rssi); + } else { + rssi = rssi_val; } bcn_param = (struct mwifiex_fixed_bcn_param *)current_ptr; @@ -1914,7 +1932,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, ret = mwifiex_parse_single_response_buf(priv, &bss_info, &bytes_left, le64_to_cpu(fw_tsf), - radio_type, false); + radio_type, false, 0); if (ret) goto check_next_scan; } @@ -1925,6 +1943,167 @@ check_next_scan: } /* + * This function prepares an extended scan command to be sent to the firmware + * + * This uses the scan command configuration sent to the command processing + * module in command preparation stage to configure a extended scan command + * structure to send to firmware. + */ +int mwifiex_cmd_802_11_scan_ext(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf) +{ + struct host_cmd_ds_802_11_scan_ext *ext_scan = &cmd->params.ext_scan; + struct mwifiex_scan_cmd_config *scan_cfg = data_buf; + + memcpy(ext_scan->tlv_buffer, scan_cfg->tlv_buf, scan_cfg->tlv_buf_len); + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_SCAN_EXT); + + /* Size is equal to the sizeof(fixed portions) + the TLV len + header */ + cmd->size = cpu_to_le16((u16)(sizeof(ext_scan->reserved) + + scan_cfg->tlv_buf_len + S_DS_GEN)); + + return 0; +} + +/* This function handles the command response of extended scan */ +int mwifiex_ret_802_11_scan_ext(struct mwifiex_private *priv) +{ + dev_dbg(priv->adapter->dev, "info: EXT scan returns successfully\n"); + return 0; +} + +/* This function This function handles the event extended scan report. It + * parses extended scan results and informs to cfg80211 stack. + */ +int mwifiex_handle_event_ext_scan_report(struct mwifiex_private *priv, + void *buf) +{ + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + u8 *bss_info; + u32 bytes_left, bytes_left_for_tlv, idx; + u16 type, len; + struct mwifiex_ie_types_data *tlv; + struct mwifiex_ie_types_bss_scan_rsp *scan_rsp_tlv; + struct mwifiex_ie_types_bss_scan_info *scan_info_tlv; + u8 *radio_type; + u64 fw_tsf = 0; + s32 rssi = 0; + struct mwifiex_event_scan_result *event_scan = buf; + u8 num_of_set = event_scan->num_of_set; + u8 *scan_resp = buf + sizeof(struct mwifiex_event_scan_result); + u16 scan_resp_size = le16_to_cpu(event_scan->buf_size); + + if (num_of_set > MWIFIEX_MAX_AP) { + dev_err(adapter->dev, + "EXT_SCAN: Invalid number of AP returned (%d)!!\n", + num_of_set); + ret = -1; + goto check_next_scan; + } + + bytes_left = scan_resp_size; + dev_dbg(adapter->dev, + "EXT_SCAN: size %d, returned %d APs...", + scan_resp_size, num_of_set); + + tlv = (struct mwifiex_ie_types_data *)scan_resp; + + for (idx = 0; idx < num_of_set && bytes_left; idx++) { + type = le16_to_cpu(tlv->header.type); + len = le16_to_cpu(tlv->header.len); + if (bytes_left < sizeof(struct mwifiex_ie_types_header) + len) { + dev_err(adapter->dev, "EXT_SCAN: Error bytes left < TLV length\n"); + break; + } + scan_rsp_tlv = NULL; + scan_info_tlv = NULL; + bytes_left_for_tlv = bytes_left; + + /* BSS response TLV with beacon or probe response buffer + * at the initial position of each descriptor + */ + if (type != TLV_TYPE_BSS_SCAN_RSP) + break; + + bss_info = (u8 *)tlv; + scan_rsp_tlv = (struct mwifiex_ie_types_bss_scan_rsp *)tlv; + tlv = (struct mwifiex_ie_types_data *)(tlv->data + len); + bytes_left_for_tlv -= + (len + sizeof(struct mwifiex_ie_types_header)); + + while (bytes_left_for_tlv >= + sizeof(struct mwifiex_ie_types_header) && + le16_to_cpu(tlv->header.type) != TLV_TYPE_BSS_SCAN_RSP) { + type = le16_to_cpu(tlv->header.type); + len = le16_to_cpu(tlv->header.len); + if (bytes_left_for_tlv < + sizeof(struct mwifiex_ie_types_header) + len) { + dev_err(adapter->dev, + "EXT_SCAN: Error in processing TLV, bytes left < TLV length\n"); + scan_rsp_tlv = NULL; + bytes_left_for_tlv = 0; + continue; + } + switch (type) { + case TLV_TYPE_BSS_SCAN_INFO: + scan_info_tlv = + (struct mwifiex_ie_types_bss_scan_info *)tlv; + if (len != + sizeof(struct mwifiex_ie_types_bss_scan_info) - + sizeof(struct mwifiex_ie_types_header)) { + bytes_left_for_tlv = 0; + continue; + } + break; + default: + break; + } + tlv = (struct mwifiex_ie_types_data *)(tlv->data + len); + bytes_left -= + (len + sizeof(struct mwifiex_ie_types_header)); + bytes_left_for_tlv -= + (len + sizeof(struct mwifiex_ie_types_header)); + } + + if (!scan_rsp_tlv) + break; + + /* Advance pointer to the beacon buffer length and + * update the bytes count so that the function + * wlan_interpret_bss_desc_with_ie() can handle the + * scan buffer withut any change + */ + bss_info += sizeof(u16); + bytes_left -= sizeof(u16); + + if (scan_info_tlv) { + rssi = (s32)(s16)(le16_to_cpu(scan_info_tlv->rssi)); + rssi *= 100; /* Convert dBm to mBm */ + dev_dbg(adapter->dev, + "info: InterpretIE: RSSI=%d\n", rssi); + fw_tsf = le64_to_cpu(scan_info_tlv->tsf); + radio_type = &scan_info_tlv->radio_type; + } else { + radio_type = NULL; + } + ret = mwifiex_parse_single_response_buf(priv, &bss_info, + &bytes_left, fw_tsf, + radio_type, true, rssi); + if (ret) + goto check_next_scan; + } + +check_next_scan: + if (!event_scan->more_event) + mwifiex_check_next_scan_command(priv); + + return ret; +} + +/* * This function prepares command for background scan query. * * Preparation includes - |