summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/marvell.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/marvell.c')
-rw-r--r--drivers/net/phy/marvell.c53
1 files changed, 51 insertions, 2 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f721444c2b0a..e6897b6a8a53 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -48,8 +48,11 @@
#define MII_M1011_IMASK_CLEAR 0x0000
#define MII_M1011_PHY_SCR 0x10
+#define MII_M1011_PHY_SCR_MDI 0x0000
+#define MII_M1011_PHY_SCR_MDI_X 0x0020
#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
+#define MII_M1145_PHY_EXT_ADDR_PAGE 0x16
#define MII_M1145_PHY_EXT_SR 0x1b
#define MII_M1145_PHY_EXT_CR 0x14
#define MII_M1145_RGMII_RX_DELAY 0x0080
@@ -159,6 +162,43 @@ static int marvell_config_intr(struct phy_device *phydev)
return err;
}
+static int marvell_set_polarity(struct phy_device *phydev, int polarity)
+{
+ int reg;
+ int err;
+ int val;
+
+ /* get the current settings */
+ reg = phy_read(phydev, MII_M1011_PHY_SCR);
+ if (reg < 0)
+ return reg;
+
+ val = reg;
+ val &= ~MII_M1011_PHY_SCR_AUTO_CROSS;
+ switch (polarity) {
+ case ETH_TP_MDI:
+ val |= MII_M1011_PHY_SCR_MDI;
+ break;
+ case ETH_TP_MDI_X:
+ val |= MII_M1011_PHY_SCR_MDI_X;
+ break;
+ case ETH_TP_MDI_AUTO:
+ case ETH_TP_MDI_INVALID:
+ default:
+ val |= MII_M1011_PHY_SCR_AUTO_CROSS;
+ break;
+ }
+
+ if (val != reg) {
+ /* Set the new polarity value in the register */
+ err = phy_write(phydev, MII_M1011_PHY_SCR, val);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
static int marvell_config_aneg(struct phy_device *phydev)
{
int err;
@@ -191,8 +231,7 @@ static int marvell_config_aneg(struct phy_device *phydev)
if (err < 0)
return err;
- err = phy_write(phydev, MII_M1011_PHY_SCR,
- MII_M1011_PHY_SCR_AUTO_CROSS);
+ err = marvell_set_polarity(phydev, phydev->mdix);
if (err < 0)
return err;
@@ -514,6 +553,16 @@ static int m88e1111_config_init(struct phy_device *phydev)
err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
if (err < 0)
return err;
+
+ /* make sure copper is selected */
+ err = phy_read(phydev, MII_M1145_PHY_EXT_ADDR_PAGE);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE,
+ err & (~0xff));
+ if (err < 0)
+ return err;
}
if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {