diff options
Diffstat (limited to 'drivers/net/phy/dp83867.c')
| -rw-r--r-- | drivers/net/phy/dp83867.c | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 6939563d3b7c..7446d5c6c714 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -682,6 +682,13 @@ static int dp83867_of_init(struct phy_device *phydev) */ dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN / 2; + /* For non-OF device, the RX and TX FIFO depths are taken from + * default value. So, we init RX & TX FIFO depths here + * so that it is configured correctly later in dp83867_config_init(); + */ + dp83867->tx_fifo_depth = DP83867_PHYCR_FIFO_DEPTH_4_B_NIB; + dp83867->rx_fifo_depth = DP83867_PHYCR_FIFO_DEPTH_4_B_NIB; + return 0; } #endif /* CONFIG_OF_MDIO */ @@ -853,6 +860,14 @@ static int dp83867_config_init(struct phy_device *phydev) else val &= ~DP83867_SGMII_TYPE; phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL, val); + + /* This is a SW workaround for link instability if RX_CTRL is + * not strapped to mode 3 or 4 in HW. This is required for SGMII + * in addition to clearing bit 7, handled above. + */ + if (dp83867->rxctrl_strap_quirk) + phy_set_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, + BIT(8)); } val = phy_read(phydev, DP83867_CFG3); |