diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ice/ice_lib.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ice/ice_lib.c | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index f981e77f72ad..acff8d3b1c97 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -3601,6 +3601,180 @@ int ice_clear_dflt_vsi(struct ice_sw *sw) } /** + * ice_get_link_speed_mbps - get link speed in Mbps + * @vsi: the VSI whose link speed is being queried + * + * Return current VSI link speed and 0 if the speed is unknown. + */ +int ice_get_link_speed_mbps(struct ice_vsi *vsi) +{ + switch (vsi->port_info->phy.link_info.link_speed) { + case ICE_AQ_LINK_SPEED_100GB: + return SPEED_100000; + case ICE_AQ_LINK_SPEED_50GB: + return SPEED_50000; + case ICE_AQ_LINK_SPEED_40GB: + return SPEED_40000; + case ICE_AQ_LINK_SPEED_25GB: + return SPEED_25000; + case ICE_AQ_LINK_SPEED_20GB: + return SPEED_20000; + case ICE_AQ_LINK_SPEED_10GB: + return SPEED_10000; + case ICE_AQ_LINK_SPEED_5GB: + return SPEED_5000; + case ICE_AQ_LINK_SPEED_2500MB: + return SPEED_2500; + case ICE_AQ_LINK_SPEED_1000MB: + return SPEED_1000; + case ICE_AQ_LINK_SPEED_100MB: + return SPEED_100; + case ICE_AQ_LINK_SPEED_10MB: + return SPEED_10; + case ICE_AQ_LINK_SPEED_UNKNOWN: + default: + return 0; + } +} + +/** + * ice_get_link_speed_kbps - get link speed in Kbps + * @vsi: the VSI whose link speed is being queried + * + * Return current VSI link speed and 0 if the speed is unknown. + */ +static int ice_get_link_speed_kbps(struct ice_vsi *vsi) +{ + int speed_mbps; + + speed_mbps = ice_get_link_speed_mbps(vsi); + + return speed_mbps * 1000; +} + +/** + * ice_set_min_bw_limit - setup minimum BW limit for Tx based on min_tx_rate + * @vsi: VSI to be configured + * @min_tx_rate: min Tx rate in Kbps to be configured as BW limit + * + * If the min_tx_rate is specified as 0 that means to clear the minimum BW limit + * profile, otherwise a non-zero value will force a minimum BW limit for the VSI + * on TC 0. + */ +int ice_set_min_bw_limit(struct ice_vsi *vsi, u64 min_tx_rate) +{ + struct ice_pf *pf = vsi->back; + enum ice_status status; + struct device *dev; + int speed; + + dev = ice_pf_to_dev(pf); + if (!vsi->port_info) { + dev_dbg(dev, "VSI %d, type %u specified doesn't have valid port_info\n", + vsi->idx, vsi->type); + return -EINVAL; + } + + speed = ice_get_link_speed_kbps(vsi); + if (min_tx_rate > (u64)speed) { + dev_err(dev, "invalid min Tx rate %llu Kbps specified for %s %d is greater than current link speed %u Kbps\n", + min_tx_rate, ice_vsi_type_str(vsi->type), vsi->idx, + speed); + return -EINVAL; + } + + /* Configure min BW for VSI limit */ + if (min_tx_rate) { + status = ice_cfg_vsi_bw_lmt_per_tc(vsi->port_info, vsi->idx, 0, + ICE_MIN_BW, min_tx_rate); + if (status) { + dev_err(dev, "failed to set min Tx rate(%llu Kbps) for %s %d\n", + min_tx_rate, ice_vsi_type_str(vsi->type), + vsi->idx); + return -EIO; + } + + dev_dbg(dev, "set min Tx rate(%llu Kbps) for %s\n", + min_tx_rate, ice_vsi_type_str(vsi->type)); + } else { + status = ice_cfg_vsi_bw_dflt_lmt_per_tc(vsi->port_info, + vsi->idx, 0, + ICE_MIN_BW); + if (status) { + dev_err(dev, "failed to clear min Tx rate configuration for %s %d\n", + ice_vsi_type_str(vsi->type), vsi->idx); + return -EIO; + } + + dev_dbg(dev, "cleared min Tx rate configuration for %s %d\n", + ice_vsi_type_str(vsi->type), vsi->idx); + } + + return 0; +} + +/** + * ice_set_max_bw_limit - setup maximum BW limit for Tx based on max_tx_rate + * @vsi: VSI to be configured + * @max_tx_rate: max Tx rate in Kbps to be configured as BW limit + * + * If the max_tx_rate is specified as 0 that means to clear the maximum BW limit + * profile, otherwise a non-zero value will force a maximum BW limit for the VSI + * on TC 0. + */ +int ice_set_max_bw_limit(struct ice_vsi *vsi, u64 max_tx_rate) +{ + struct ice_pf *pf = vsi->back; + enum ice_status status; + struct device *dev; + int speed; + + dev = ice_pf_to_dev(pf); + if (!vsi->port_info) { + dev_dbg(dev, "VSI %d, type %u specified doesn't have valid port_info\n", + vsi->idx, vsi->type); + return -EINVAL; + } + + speed = ice_get_link_speed_kbps(vsi); + if (max_tx_rate > (u64)speed) { + dev_err(dev, "invalid max Tx rate %llu Kbps specified for %s %d is greater than current link speed %u Kbps\n", + max_tx_rate, ice_vsi_type_str(vsi->type), vsi->idx, + speed); + return -EINVAL; + } + + /* Configure max BW for VSI limit */ + if (max_tx_rate) { + status = ice_cfg_vsi_bw_lmt_per_tc(vsi->port_info, vsi->idx, 0, + ICE_MAX_BW, max_tx_rate); + if (status) { + dev_err(dev, "failed setting max Tx rate(%llu Kbps) for %s %d\n", + max_tx_rate, ice_vsi_type_str(vsi->type), + vsi->idx); + return -EIO; + } + + dev_dbg(dev, "set max Tx rate(%llu Kbps) for %s %d\n", + max_tx_rate, ice_vsi_type_str(vsi->type), vsi->idx); + } else { + status = ice_cfg_vsi_bw_dflt_lmt_per_tc(vsi->port_info, + vsi->idx, 0, + ICE_MAX_BW); + if (status) { + dev_err(dev, "failed clearing max Tx rate configuration for %s %d\n", + ice_vsi_type_str(vsi->type), vsi->idx); + return -EIO; + } + + dev_dbg(dev, "cleared max Tx rate configuration for %s %d\n", + ice_vsi_type_str(vsi->type), vsi->idx); + } + + return 0; +} + +/** * ice_set_link - turn on/off physical link * @vsi: VSI to modify physical link on * @ena: turn on/off physical link |