diff options
Diffstat (limited to 'drivers/net/ethernet/dlink/de600.c')
| -rw-r--r-- | drivers/net/ethernet/dlink/de600.c | 530 |
1 files changed, 530 insertions, 0 deletions
diff --git a/drivers/net/ethernet/dlink/de600.c b/drivers/net/ethernet/dlink/de600.c new file mode 100644 index 000000000000..23a65398d011 --- /dev/null +++ b/drivers/net/ethernet/dlink/de600.c @@ -0,0 +1,530 @@ +static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj0rn@blox.se)\n"; +/* + * de600.c + * + * Linux driver for the D-Link DE-600 Ethernet pocket adapter. + * + * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall + * The Author may be reached as bj0rn@blox.se + * + * Based on adapter information gathered from DE600.ASM by D-Link Inc., + * as included on disk C in the v.2.11 of PC/TCP from FTP Software. + * For DE600.asm: + * Portions (C) Copyright 1990 D-Link, Inc. + * Copyright, 1988-1992, Russell Nelson, Crynwr Software + * + * Adapted to the sample network driver core for linux, + * written by: Donald Becker <becker@super.org> + * (Now at <becker@scyld.com>) + * + **************************************************************/ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + **************************************************************/ + +/* Add more time here if your adapter won't work OK: */ +#define DE600_SLOW_DOWN udelay(delay_time) + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <asm/system.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/inet.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> + +#include <asm/io.h> + +#include "de600.h" + +static unsigned int check_lost = 1; +module_param(check_lost, bool, 0); +MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600"); + +static unsigned int delay_time = 10; +module_param(delay_time, int, 0); +MODULE_PARM_DESC(delay_time, "DE-600 deley on I/O in microseconds"); + + +/* + * D-Link driver variables: + */ + +static volatile int rx_page; + +#define TX_PAGES 2 +static volatile int tx_fifo[TX_PAGES]; +static volatile int tx_fifo_in; +static volatile int tx_fifo_out; +static volatile int free_tx_pages = TX_PAGES; +static int was_down; +static DEFINE_SPINLOCK(de600_lock); + +static inline u8 de600_read_status(struct net_device *dev) +{ + u8 status; + + outb_p(STATUS, DATA_PORT); + status = inb(STATUS_PORT); + outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT); + + return status; +} + +static inline u8 de600_read_byte(unsigned char type, struct net_device *dev) +{ + /* dev used by macros */ + u8 lo; + outb_p((type), DATA_PORT); + lo = ((unsigned char)inb(STATUS_PORT)) >> 4; + outb_p((type) | HI_NIBBLE, DATA_PORT); + return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo; +} + +/* + * Open/initialize the board. This is called (in the current kernel) + * after booting when 'ifconfig <dev->name> $IP_ADDR' is run (in rc.inet1). + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is a non-reboot way to recover if something goes wrong. + */ + +static int de600_open(struct net_device *dev) +{ + unsigned long flags; + int ret = request_irq(DE600_IRQ, de600_interrupt, 0, dev->name, dev); + if (ret) { + printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, DE600_IRQ); + return ret; + } + spin_lock_irqsave(&de600_lock, flags); + ret = adapter_init(dev); + spin_unlock_irqrestore(&de600_lock, flags); + return ret; +} + +/* + * The inverse routine to de600_open(). + */ + +static int de600_close(struct net_device *dev) +{ + select_nic(); + rx_page = 0; + de600_put_command(RESET); + de600_put_command(STOP_RESET); + de600_put_command(0); + select_prn(); + free_irq(DE600_IRQ, dev); + return 0; +} + +static inline void trigger_interrupt(struct net_device *dev) +{ + de600_put_command(FLIP_IRQ); + select_prn(); + DE600_SLOW_DOWN; + select_nic(); + de600_put_command(0); +} + +/* + * Copy a buffer to the adapter transmit page memory. + * Start sending. + */ + +static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + int transmit_from; + int len; + int tickssofar; + u8 *buffer = skb->data; + int i; + + if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */ + tickssofar = jiffies - dev_trans_start(dev); + if (tickssofar < HZ/20) + return NETDEV_TX_BUSY; + /* else */ + printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem"); + /* Restart the adapter. */ + spin_lock_irqsave(&de600_lock, flags); + if (adapter_init(dev)) { + spin_unlock_irqrestore(&de600_lock, flags); + return NETDEV_TX_BUSY; + } + spin_unlock_irqrestore(&de600_lock, flags); + } + + /* Start real output */ + pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages); + + if ((len = skb->len) < RUNT) + len = RUNT; + + spin_lock_irqsave(&de600_lock, flags); + select_nic(); + tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len; + tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */ + + if(check_lost) + { + /* This costs about 40 instructions per packet... */ + de600_setup_address(NODE_ADDRESS, RW_ADDR); + de600_read_byte(READ_DATA, dev); + if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) { + if (adapter_init(dev)) { + spin_unlock_irqrestore(&de600_lock, flags); + return NETDEV_TX_BUSY; + } + } + } + + de600_setup_address(transmit_from, RW_ADDR); + for (i = 0; i < skb->len ; ++i, ++buffer) + de600_put_byte(*buffer); + for (; i < len; ++i) + de600_put_byte(0); + + if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */ + dev->trans_start = jiffies; + netif_start_queue(dev); /* allow more packets into adapter */ + /* Send page and generate a faked interrupt */ + de600_setup_address(transmit_from, TX_ADDR); + de600_put_command(TX_ENABLE); + } + else { + if (free_tx_pages) + netif_start_queue(dev); + else + netif_stop_queue(dev); + select_prn(); + } + spin_unlock_irqrestore(&de600_lock, flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +/* + * The typical workload of the driver: + * Handle the network interface interrupts. + */ + +static irqreturn_t de600_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + u8 irq_status; + int retrig = 0; + int boguscount = 0; + + spin_lock(&de600_lock); + + select_nic(); + irq_status = de600_read_status(dev); + + do { + pr_debug("de600_interrupt (%02X)\n", irq_status); + + if (irq_status & RX_GOOD) + de600_rx_intr(dev); + else if (!(irq_status & RX_BUSY)) + de600_put_command(RX_ENABLE); + + /* Any transmission in progress? */ + if (free_tx_pages < TX_PAGES) + retrig = de600_tx_intr(dev, irq_status); + else + retrig = 0; + + irq_status = de600_read_status(dev); + } while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) ); + /* + * Yeah, it _looks_ like busy waiting, smells like busy waiting + * and I know it's not PC, but please, it will only occur once + * in a while and then only for a loop or so (< 1ms for sure!) + */ + + /* Enable adapter interrupts */ + select_prn(); + if (retrig) + trigger_interrupt(dev); + spin_unlock(&de600_lock); + return IRQ_HANDLED; +} + +static int de600_tx_intr(struct net_device *dev, int irq_status) +{ + /* + * Returns 1 if tx still not done + */ + + /* Check if current transmission is done yet */ + if (irq_status & TX_BUSY) + return 1; /* tx not done, try again */ + + /* else */ + /* If last transmission OK then bump fifo index */ + if (!(irq_status & TX_FAILED16)) { + tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES; + ++free_tx_pages; + dev->stats.tx_packets++; + netif_wake_queue(dev); + } + + /* More to send, or resend last packet? */ + if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) { + dev->trans_start = jiffies; + de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR); + de600_put_command(TX_ENABLE); + return 1; + } + /* else */ + + return 0; +} + +/* + * We have a good packet, get it out of the adapter. + */ +static void de600_rx_intr(struct net_device *dev) +{ + struct sk_buff *skb; + int i; + int read_from; + int size; + unsigned char *buffer; + + /* Get size of received packet */ + size = de600_read_byte(RX_LEN, dev); /* low byte */ + size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */ + size -= 4; /* Ignore trailing 4 CRC-bytes */ + + /* Tell adapter where to store next incoming packet, enable receiver */ + read_from = rx_page_adr(); + next_rx_page(); + de600_put_command(RX_ENABLE); + + if ((size < 32) || (size > 1535)) { + printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size); + if (size > 10000) + adapter_init(dev); + return; + } + + skb = dev_alloc_skb(size+2); + if (skb == NULL) { + printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size); + return; + } + /* else */ + + skb_reserve(skb,2); /* Align */ + + /* 'skb->data' points to the start of sk_buff data area. */ + buffer = skb_put(skb,size); + + /* copy the packet into the buffer */ + de600_setup_address(read_from, RW_ADDR); + for (i = size; i > 0; --i, ++buffer) + *buffer = de600_read_byte(READ_DATA, dev); + + skb->protocol=eth_type_trans(skb,dev); + + netif_rx(skb); + + /* update stats */ + dev->stats.rx_packets++; /* count all receives */ + dev->stats.rx_bytes += size; /* count all received bytes */ + + /* + * If any worth-while packets have been received, netif_rx() + * will work on them when we get to the tasklets. + */ +} + +static const struct net_device_ops de600_netdev_ops = { + .ndo_open = de600_open, + .ndo_stop = de600_close, + .ndo_start_xmit = de600_start_xmit, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + + +static struct net_device * __init de600_probe(void) +{ + int i; + struct net_device *dev; + int err; + + dev = alloc_etherdev(0); + if (!dev) + return ERR_PTR(-ENOMEM); + + + if (!request_region(DE600_IO, 3, "de600")) { + printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO); + err = -EBUSY; + goto out; + } + + printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name); + /* Alpha testers must have the version number to report bugs. */ + pr_debug("%s", version); + + /* probe for adapter */ + err = -ENODEV; + rx_page = 0; + select_nic(); + (void)de600_read_status(dev); + de600_put_command(RESET); + de600_put_command(STOP_RESET); + if (de600_read_status(dev) & 0xf0) { + printk(": not at I/O %#3x.\n", DATA_PORT); + goto out1; + } + + /* + * Maybe we found one, + * have to check if it is a D-Link DE-600 adapter... + */ + + /* Get the adapter ethernet address from the ROM */ + de600_setup_address(NODE_ADDRESS, RW_ADDR); + for (i = 0; i < ETH_ALEN; i++) { + dev->dev_addr[i] = de600_read_byte(READ_DATA, dev); + dev->broadcast[i] = 0xff; + } + + /* Check magic code */ + if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) { + /* OK, install real address */ + dev->dev_addr[0] = 0x00; + dev->dev_addr[1] = 0x80; + dev->dev_addr[2] = 0xc8; + dev->dev_addr[3] &= 0x0f; + dev->dev_addr[3] |= 0x70; + } else { + printk(" not identified in the printer port\n"); + goto out1; + } + + printk(", Ethernet Address: %pM\n", dev->dev_addr); + + dev->netdev_ops = &de600_netdev_ops; + + dev->flags&=~IFF_MULTICAST; + + select_prn(); + + err = register_netdev(dev); + if (err) + goto out1; + + return dev; + +out1: + release_region(DE600_IO, 3); +out: + free_netdev(dev); + return ERR_PTR(err); +} + +static int adapter_init(struct net_device *dev) +{ + int i; + + select_nic(); + rx_page = 0; /* used by RESET */ + de600_put_command(RESET); + de600_put_command(STOP_RESET); + + /* Check if it is still there... */ + /* Get the some bytes of the adapter ethernet address from the ROM */ + de600_setup_address(NODE_ADDRESS, RW_ADDR); + de600_read_byte(READ_DATA, dev); + if ((de600_read_byte(READ_DATA, dev) != 0xde) || + (de600_read_byte(READ_DATA, dev) != 0x15)) { + /* was: if (de600_read_status(dev) & 0xf0) { */ + printk("Something has happened to the DE-600! Please check it and do a new ifconfig!\n"); + /* Goodbye, cruel world... */ + dev->flags &= ~IFF_UP; + de600_close(dev); + was_down = 1; + netif_stop_queue(dev); /* Transmit busy... */ + return 1; /* failed */ + } + + if (was_down) { + printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name); + was_down = 0; + } + + tx_fifo_in = 0; + tx_fifo_out = 0; + free_tx_pages = TX_PAGES; + + + /* set the ether address. */ + de600_setup_address(NODE_ADDRESS, RW_ADDR); + for (i = 0; i < ETH_ALEN; i++) + de600_put_byte(dev->dev_addr[i]); + + /* where to start saving incoming packets */ + rx_page = RX_BP | RX_BASE_PAGE; + de600_setup_address(MEM_4K, RW_ADDR); + /* Enable receiver */ + de600_put_command(RX_ENABLE); + select_prn(); + + netif_start_queue(dev); + + return 0; /* OK */ +} + +static struct net_device *de600_dev; + +static int __init de600_init(void) +{ + de600_dev = de600_probe(); + if (IS_ERR(de600_dev)) + return PTR_ERR(de600_dev); + return 0; +} + +static void __exit de600_exit(void) +{ + unregister_netdev(de600_dev); + release_region(DE600_IO, 3); + free_netdev(de600_dev); +} + +module_init(de600_init); +module_exit(de600_exit); + +MODULE_LICENSE("GPL"); |