diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/t4_hw.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 1c8068c02728..1aa6dc10dc0b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -3163,7 +3163,7 @@ int t4_get_tp_version(struct adapter *adapter, u32 *vers) /** * t4_get_exprom_version - return the Expansion ROM version (if any) - * @adapter: the adapter + * @adap: the adapter * @vers: where to place the version * * Reads the Expansion ROM header from FLASH and returns the version @@ -5310,7 +5310,7 @@ static unsigned int t4_use_ldst(struct adapter *adap) * @cmd: TP fw ldst address space type * @vals: where the indirect register values are stored/written * @nregs: how many indirect registers to read/write - * @start_idx: index of first indirect register to read/write + * @start_index: index of first indirect register to read/write * @rw: Read (1) or Write (0) * @sleep_ok: if true we may sleep while awaiting command completion * @@ -6115,7 +6115,7 @@ void t4_pmrx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[]) /** * compute_mps_bg_map - compute the MPS Buffer Group Map for a Port - * @adap: the adapter + * @adapter: the adapter * @pidx: the port index * * Computes and returns a bitmap indicating which MPS buffer groups are @@ -6252,7 +6252,7 @@ static unsigned int t4_get_tp_e2c_map(struct adapter *adapter, int pidx) /** * t4_get_tp_ch_map - return TP ingress channels associated with a port - * @adapter: the adapter + * @adap: the adapter * @pidx: the port index * * Returns a bitmap indicating which TP Ingress Channels are associated @@ -6589,7 +6589,7 @@ int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, * @phy_addr: the PHY address * @mmd: the PHY MMD to access (0 for clause 22 PHYs) * @reg: the register to write - * @valp: value to write + * @val: value to write * * Issues a FW command through the given mailbox to write a PHY register. */ @@ -6615,7 +6615,7 @@ int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, /** * t4_sge_decode_idma_state - decode the idma state - * @adap: the adapter + * @adapter: the adapter * @state: the state idma is stuck in */ void t4_sge_decode_idma_state(struct adapter *adapter, int state) @@ -6782,7 +6782,7 @@ void t4_sge_decode_idma_state(struct adapter *adapter, int state) * t4_sge_ctxt_flush - flush the SGE context cache * @adap: the adapter * @mbox: mailbox to use for the FW command - * @ctx_type: Egress or Ingress + * @ctxt_type: Egress or Ingress * * Issues a FW command through the given mailbox to flush the * SGE context cache. @@ -6809,7 +6809,7 @@ int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type) /** * t4_read_sge_dbqtimers - read SGE Doorbell Queue Timer values - * @adap - the adapter + * @adap: the adapter * @ndbqtimers: size of the provided SGE Doorbell Queue Timer table * @dbqtimers: SGE Doorbell Queue Timer table * @@ -7092,6 +7092,7 @@ static int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force) /** * t4_fw_restart - restart the firmware by taking the uP out of RESET * @adap: the adapter + * @mbox: mailbox to use for the FW command * @reset: if we want to do a RESET to restart things * * Restart firmware previously halted by t4_fw_halt(). On successful @@ -7630,6 +7631,8 @@ int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf, * @nmac: number of MAC addresses needed (1 to 5) * @mac: the MAC addresses of the VI * @rss_size: size of RSS table slice associated with this VI + * @vivld: the destination to store the VI Valid value. + * @vin: the destination to store the VIN value. * * Allocates a virtual interface for the given physical port. If @mac is * not %NULL it contains the MAC addresses of the VI as assigned by FW. @@ -7848,7 +7851,7 @@ int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid, * t4_alloc_encap_mac_filt - Adds a mac entry in mps tcam with VNI support * @adap: the adapter * @viid: the VI id - * @mac: the MAC address + * @addr: the MAC address * @mask: the mask * @vni: the VNI id for the tunnel protocol * @vni_mask: mask for the VNI id @@ -7897,11 +7900,11 @@ int t4_alloc_encap_mac_filt(struct adapter *adap, unsigned int viid, * t4_alloc_raw_mac_filt - Adds a mac entry in mps tcam * @adap: the adapter * @viid: the VI id - * @mac: the MAC address + * @addr: the MAC address * @mask: the mask * @idx: index at which to add this entry - * @port_id: the port index * @lookup_type: MAC address for inner (1) or outer (0) header + * @port_id: the port index * @sleep_ok: call is allowed to sleep * * Adds the mac entry at the specified index using raw mac interface. @@ -8126,7 +8129,7 @@ int t4_free_mac_filt(struct adapter *adap, unsigned int mbox, * @idx: index of existing filter for old value of MAC address, or -1 * @addr: the new MAC address value * @persist: whether a new MAC allocation should be persistent - * @add_smt: if true also add the address to the HW SMT + * @smt_idx: the destination to store the new SMT index. * * Modifies an exact-match filter and sets it to the new MAC address. * Note that in general it is not possible to modify the value of a given @@ -8448,7 +8451,6 @@ int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, /** * t4_link_down_rc_str - return a string for a Link Down Reason Code - * @adap: the adapter * @link_down_rc: Link Down Reason Code * * Returns a string representation of the Link Down Reason Code. @@ -8472,9 +8474,7 @@ static const char *t4_link_down_rc_str(unsigned char link_down_rc) return reason[link_down_rc]; } -/** - * Return the highest speed set in the port capabilities, in Mb/s. - */ +/* Return the highest speed set in the port capabilities, in Mb/s. */ static unsigned int fwcap_to_speed(fw_port_cap32_t caps) { #define TEST_SPEED_RETURN(__caps_speed, __speed) \ @@ -9110,7 +9110,6 @@ found: /** * t4_prep_adapter - prepare SW and HW for operation * @adapter: the adapter - * @reset: if true perform a HW reset * * Initialize adapter SW state for the various HW modules, set initial * values for some adapter tunables, take PHYs out of reset, and @@ -10395,6 +10394,7 @@ int t4_sched_params(struct adapter *adapter, u8 type, u8 level, u8 mode, /** * t4_i2c_rd - read I2C data from adapter * @adap: the adapter + * @mbox: mailbox to use for the FW command * @port: Port number if per-port device; <0 if not * @devid: per-port device ID or absolute device ID * @offset: byte offset into device I2C space @@ -10450,7 +10450,7 @@ int t4_i2c_rd(struct adapter *adap, unsigned int mbox, int port, /** * t4_set_vlan_acl - Set a VLAN id for the specified VF - * @adapter: the adapter + * @adap: the adapter * @mbox: mailbox to use for the FW command * @vf: one of the VFs instantiated by the specified PF * @vlan: The vlanid to be set |