diff options
Diffstat (limited to 'drivers/net/dsa')
| -rw-r--r-- | drivers/net/dsa/Makefile | 4 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 3 | ||||
| -rw-r--r-- | drivers/net/dsa/realtek-smi-core.c (renamed from drivers/net/dsa/realtek-smi.c) | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/realtek-smi-core.h (renamed from drivers/net/dsa/realtek-smi.h) | 0 | ||||
| -rw-r--r-- | drivers/net/dsa/rtl8366.c | 9 | ||||
| -rw-r--r-- | drivers/net/dsa/rtl8366rb.c | 2 |
6 files changed, 12 insertions, 8 deletions
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index fefb6aaa82ba..d99dc6de0006 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -9,8 +9,8 @@ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o -obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek.o -realtek-objs := realtek-smi.o rtl8366.o rtl8366rb.o +obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o +realtek-smi-objs := realtek-smi-core.o rtl8366.o rtl8366rb.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 39dace8e3512..f46086fa9064 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -83,6 +83,9 @@ static void ksz_mib_read_work(struct work_struct *work) int i; for (i = 0; i < dev->mib_port_cnt; i++) { + if (dsa_is_unused_port(dev->ds, i)) + continue; + p = &dev->ports[i]; mib = &p->mib; mutex_lock(&mib->cnt_mutex); diff --git a/drivers/net/dsa/realtek-smi.c b/drivers/net/dsa/realtek-smi-core.c index ad41ec63cc9f..dc0509c02d29 100644 --- a/drivers/net/dsa/realtek-smi.c +++ b/drivers/net/dsa/realtek-smi-core.c @@ -40,7 +40,7 @@ #include <linux/bitops.h> #include <linux/if_bridge.h> -#include "realtek-smi.h" +#include "realtek-smi-core.h" #define REALTEK_SMI_ACK_RETRY_COUNT 5 #define REALTEK_SMI_HW_STOP_DELAY 25 /* msecs */ diff --git a/drivers/net/dsa/realtek-smi.h b/drivers/net/dsa/realtek-smi-core.h index 9a63b51e1d82..9a63b51e1d82 100644 --- a/drivers/net/dsa/realtek-smi.h +++ b/drivers/net/dsa/realtek-smi-core.h diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c index 6dedd43442cc..ca3d17e43ed8 100644 --- a/drivers/net/dsa/rtl8366.c +++ b/drivers/net/dsa/rtl8366.c @@ -11,7 +11,7 @@ #include <linux/if_bridge.h> #include <net/dsa.h> -#include "realtek-smi.h" +#include "realtek-smi-core.h" int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used) { @@ -307,7 +307,8 @@ int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering) struct rtl8366_vlan_4k vlan4k; int ret; - if (!smi->ops->is_vlan_valid(smi, port)) + /* Use VLAN nr port + 1 since VLAN0 is not valid */ + if (!smi->ops->is_vlan_valid(smi, port + 1)) return -EINVAL; dev_info(smi->dev, "%s filtering on port %d\n", @@ -318,12 +319,12 @@ int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering) * The hardware support filter ID (FID) 0..7, I have no clue how to * support this in the driver when the callback only says on/off. */ - ret = smi->ops->get_vlan_4k(smi, port, &vlan4k); + ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k); if (ret) return ret; /* Just set the filter to FID 1 for now then */ - ret = rtl8366_set_vlan(smi, port, + ret = rtl8366_set_vlan(smi, port + 1, vlan4k.member, vlan4k.untag, 1); diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c index 40b3974970c6..a268085ffad2 100644 --- a/drivers/net/dsa/rtl8366rb.c +++ b/drivers/net/dsa/rtl8366rb.c @@ -20,7 +20,7 @@ #include <linux/of_irq.h> #include <linux/regmap.h> -#include "realtek-smi.h" +#include "realtek-smi-core.h" #define RTL8366RB_PORT_NUM_CPU 5 #define RTL8366RB_NUM_PORTS 6 |