diff options
Diffstat (limited to 'drivers/net/dsa/qca8k.c')
| -rw-r--r-- | drivers/net/dsa/qca8k.c | 1582 |
1 files changed, 1142 insertions, 440 deletions
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 039694518788..d3ed0a7f8077 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -20,6 +20,7 @@ #include <linux/phylink.h> #include <linux/gpio/consumer.h> #include <linux/etherdevice.h> +#include <linux/dsa/tag_qca.h> #include "qca8k.h" @@ -74,12 +75,6 @@ static const struct qca8k_mib_desc ar8327_mib[] = { MIB_DESC(1, 0xac, "TXUnicast"), }; -/* The 32bit switch registers are accessed indirectly. To achieve this we need - * to set the page of the register. Track the last page that was set to reduce - * mdio writes - */ -static u16 qca8k_current_page = 0xffff; - static void qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) { @@ -94,6 +89,44 @@ qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) } static int +qca8k_set_lo(struct qca8k_priv *priv, int phy_id, u32 regnum, u16 lo) +{ + u16 *cached_lo = &priv->mdio_cache.lo; + struct mii_bus *bus = priv->bus; + int ret; + + if (lo == *cached_lo) + return 0; + + ret = bus->write(bus, phy_id, regnum, lo); + if (ret < 0) + dev_err_ratelimited(&bus->dev, + "failed to write qca8k 32bit lo register\n"); + + *cached_lo = lo; + return 0; +} + +static int +qca8k_set_hi(struct qca8k_priv *priv, int phy_id, u32 regnum, u16 hi) +{ + u16 *cached_hi = &priv->mdio_cache.hi; + struct mii_bus *bus = priv->bus; + int ret; + + if (hi == *cached_hi) + return 0; + + ret = bus->write(bus, phy_id, regnum, hi); + if (ret < 0) + dev_err_ratelimited(&bus->dev, + "failed to write qca8k 32bit hi register\n"); + + *cached_hi = hi; + return 0; +} + +static int qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) { int ret; @@ -116,7 +149,7 @@ qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) } static void -qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) +qca8k_mii_write32(struct qca8k_priv *priv, int phy_id, u32 regnum, u32 val) { u16 lo, hi; int ret; @@ -124,20 +157,19 @@ qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) lo = val & 0xffff; hi = (u16)(val >> 16); - ret = bus->write(bus, phy_id, regnum, lo); + ret = qca8k_set_lo(priv, phy_id, regnum, lo); if (ret >= 0) - ret = bus->write(bus, phy_id, regnum + 1, hi); - if (ret < 0) - dev_err_ratelimited(&bus->dev, - "failed to write qca8k 32bit register\n"); + ret = qca8k_set_hi(priv, phy_id, regnum + 1, hi); } static int -qca8k_set_page(struct mii_bus *bus, u16 page) +qca8k_set_page(struct qca8k_priv *priv, u16 page) { + u16 *cached_page = &priv->mdio_cache.page; + struct mii_bus *bus = priv->bus; int ret; - if (page == qca8k_current_page) + if (page == *cached_page) return 0; ret = bus->write(bus, 0x18, 0, page); @@ -147,7 +179,7 @@ qca8k_set_page(struct mii_bus *bus, u16 page) return ret; } - qca8k_current_page = page; + *cached_page = page; usleep_range(1000, 2000); return 0; } @@ -170,6 +202,252 @@ qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) return regmap_update_bits(priv->regmap, reg, mask, write_val); } +static void qca8k_rw_reg_ack_handler(struct dsa_switch *ds, struct sk_buff *skb) +{ + struct qca8k_mgmt_eth_data *mgmt_eth_data; + struct qca8k_priv *priv = ds->priv; + struct qca_mgmt_ethhdr *mgmt_ethhdr; + u8 len, cmd; + + mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb_mac_header(skb); + mgmt_eth_data = &priv->mgmt_eth_data; + + cmd = FIELD_GET(QCA_HDR_MGMT_CMD, mgmt_ethhdr->command); + len = FIELD_GET(QCA_HDR_MGMT_LENGTH, mgmt_ethhdr->command); + + /* Make sure the seq match the requested packet */ + if (mgmt_ethhdr->seq == mgmt_eth_data->seq) + mgmt_eth_data->ack = true; + + if (cmd == MDIO_READ) { + mgmt_eth_data->data[0] = mgmt_ethhdr->mdio_data; + + /* Get the rest of the 12 byte of data. + * The read/write function will extract the requested data. + */ + if (len > QCA_HDR_MGMT_DATA1_LEN) + memcpy(mgmt_eth_data->data + 1, skb->data, + QCA_HDR_MGMT_DATA2_LEN); + } + + complete(&mgmt_eth_data->rw_done); +} + +static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 *val, + int priority, unsigned int len) +{ + struct qca_mgmt_ethhdr *mgmt_ethhdr; + unsigned int real_len; + struct sk_buff *skb; + u32 *data2; + u16 hdr; + + skb = dev_alloc_skb(QCA_HDR_MGMT_PKT_LEN); + if (!skb) + return NULL; + + /* Max value for len reg is 15 (0xf) but the switch actually return 16 byte + * Actually for some reason the steps are: + * 0: nothing + * 1-4: first 4 byte + * 5-6: first 12 byte + * 7-15: all 16 byte + */ + if (len == 16) + real_len = 15; + else + real_len = len; + + skb_reset_mac_header(skb); + skb_set_network_header(skb, skb->len); + + mgmt_ethhdr = skb_push(skb, QCA_HDR_MGMT_HEADER_LEN + QCA_HDR_LEN); + + hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION); + hdr |= FIELD_PREP(QCA_HDR_XMIT_PRIORITY, priority); + hdr |= QCA_HDR_XMIT_FROM_CPU; + hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(0)); + hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG); + + mgmt_ethhdr->command = FIELD_PREP(QCA_HDR_MGMT_ADDR, reg); + mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_LENGTH, real_len); + mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_CMD, cmd); + mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_CHECK_CODE, + QCA_HDR_MGMT_CHECK_CODE_VAL); + + if (cmd == MDIO_WRITE) + mgmt_ethhdr->mdio_data = *val; + + mgmt_ethhdr->hdr = htons(hdr); + + data2 = skb_put_zero(skb, QCA_HDR_MGMT_DATA2_LEN + QCA_HDR_MGMT_PADDING_LEN); + if (cmd == MDIO_WRITE && len > QCA_HDR_MGMT_DATA1_LEN) + memcpy(data2, val + 1, len - QCA_HDR_MGMT_DATA1_LEN); + + return skb; +} + +static void qca8k_mdio_header_fill_seq_num(struct sk_buff *skb, u32 seq_num) +{ + struct qca_mgmt_ethhdr *mgmt_ethhdr; + + mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb->data; + mgmt_ethhdr->seq = FIELD_PREP(QCA_HDR_MGMT_SEQ_NUM, seq_num); +} + +static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) +{ + struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; + struct sk_buff *skb; + bool ack; + int ret; + + skb = qca8k_alloc_mdio_header(MDIO_READ, reg, NULL, + QCA8K_ETHERNET_MDIO_PRIORITY, len); + if (!skb) + return -ENOMEM; + + mutex_lock(&mgmt_eth_data->mutex); + + /* Check mgmt_master if is operational */ + if (!priv->mgmt_master) { + kfree_skb(skb); + mutex_unlock(&mgmt_eth_data->mutex); + return -EINVAL; + } + + skb->dev = priv->mgmt_master; + + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the mdio pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); + + *val = mgmt_eth_data->data[0]; + if (len > QCA_HDR_MGMT_DATA1_LEN) + memcpy(val + 1, mgmt_eth_data->data + 1, len - QCA_HDR_MGMT_DATA1_LEN); + + ack = mgmt_eth_data->ack; + + mutex_unlock(&mgmt_eth_data->mutex); + + if (ret <= 0) + return -ETIMEDOUT; + + if (!ack) + return -EINVAL; + + return 0; +} + +static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) +{ + struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; + struct sk_buff *skb; + bool ack; + int ret; + + skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, val, + QCA8K_ETHERNET_MDIO_PRIORITY, len); + if (!skb) + return -ENOMEM; + + mutex_lock(&mgmt_eth_data->mutex); + + /* Check mgmt_master if is operational */ + if (!priv->mgmt_master) { + kfree_skb(skb); + mutex_unlock(&mgmt_eth_data->mutex); + return -EINVAL; + } + + skb->dev = priv->mgmt_master; + + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the mdio pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); + + ack = mgmt_eth_data->ack; + + mutex_unlock(&mgmt_eth_data->mutex); + + if (ret <= 0) + return -ETIMEDOUT; + + if (!ack) + return -EINVAL; + + return 0; +} + +static int +qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) +{ + u32 val = 0; + int ret; + + ret = qca8k_read_eth(priv, reg, &val, sizeof(val)); + if (ret) + return ret; + + val &= ~mask; + val |= write_val; + + return qca8k_write_eth(priv, reg, &val, sizeof(val)); +} + +static int +qca8k_bulk_read(struct qca8k_priv *priv, u32 reg, u32 *val, int len) +{ + int i, count = len / sizeof(u32), ret; + + if (priv->mgmt_master && !qca8k_read_eth(priv, reg, val, len)) + return 0; + + for (i = 0; i < count; i++) { + ret = regmap_read(priv->regmap, reg + (i * 4), val + i); + if (ret < 0) + return ret; + } + + return 0; +} + +static int +qca8k_bulk_write(struct qca8k_priv *priv, u32 reg, u32 *val, int len) +{ + int i, count = len / sizeof(u32), ret; + u32 tmp; + + if (priv->mgmt_master && !qca8k_write_eth(priv, reg, val, len)) + return 0; + + for (i = 0; i < count; i++) { + tmp = val[i]; + + ret = regmap_write(priv->regmap, reg + (i * 4), tmp); + if (ret < 0) + return ret; + } + + return 0; +} + static int qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) { @@ -178,11 +456,14 @@ qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) u16 r1, r2, page; int ret; + if (!qca8k_read_eth(priv, reg, val, sizeof(*val))) + return 0; + qca8k_split_addr(reg, &r1, &r2, &page); mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); - ret = qca8k_set_page(bus, page); + ret = qca8k_set_page(priv, page); if (ret < 0) goto exit; @@ -201,15 +482,18 @@ qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) u16 r1, r2, page; int ret; + if (!qca8k_write_eth(priv, reg, &val, sizeof(val))) + return 0; + qca8k_split_addr(reg, &r1, &r2, &page); mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); - ret = qca8k_set_page(bus, page); + ret = qca8k_set_page(priv, page); if (ret < 0) goto exit; - qca8k_mii_write32(bus, 0x10 | r2, r1, val); + qca8k_mii_write32(priv, 0x10 | r2, r1, val); exit: mutex_unlock(&bus->mdio_lock); @@ -225,11 +509,14 @@ qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_ u32 val; int ret; + if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val)) + return 0; + qca8k_split_addr(reg, &r1, &r2, &page); mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); - ret = qca8k_set_page(bus, page); + ret = qca8k_set_page(priv, page); if (ret < 0) goto exit; @@ -239,7 +526,7 @@ qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_ val &= ~mask; val |= write_val; - qca8k_mii_write32(bus, 0x10 | r2, r1, val); + qca8k_mii_write32(priv, 0x10 | r2, r1, val); exit: mutex_unlock(&bus->mdio_lock); @@ -296,17 +583,13 @@ qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask) static int qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb) { - u32 reg[4], val; - int i, ret; + u32 reg[3]; + int ret; /* load the ARL table into an array */ - for (i = 0; i < 4; i++) { - ret = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4), &val); - if (ret < 0) - return ret; - - reg[i] = val; - } + ret = qca8k_bulk_read(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg)); + if (ret) + return ret; /* vid - 83:72 */ fdb->vid = FIELD_GET(QCA8K_ATU_VID_MASK, reg[2]); @@ -330,7 +613,6 @@ qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac, u8 aging) { u32 reg[3] = { 0 }; - int i; /* vid - 83:72 */ reg[2] = FIELD_PREP(QCA8K_ATU_VID_MASK, vid); @@ -347,8 +629,7 @@ qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac, reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]); /* load the array into the ARL table */ - for (i = 0; i < 3; i++) - qca8k_write(priv, QCA8K_REG_ATU_DATA0 + (i * 4), reg[i]); + qca8k_bulk_write(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg)); } static int @@ -632,7 +913,10 @@ qca8k_mib_init(struct qca8k_priv *priv) int ret; mutex_lock(&priv->reg_mutex); - ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); + ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB, + QCA8K_MIB_FUNC | QCA8K_MIB_BUSY, + FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_FLUSH) | + QCA8K_MIB_BUSY); if (ret) goto exit; @@ -666,6 +950,199 @@ qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable) regmap_clear_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask); } +static int +qca8k_phy_eth_busy_wait(struct qca8k_mgmt_eth_data *mgmt_eth_data, + struct sk_buff *read_skb, u32 *val) +{ + struct sk_buff *skb = skb_copy(read_skb, GFP_KERNEL); + bool ack; + int ret; + + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the copy pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + QCA8K_ETHERNET_TIMEOUT); + + ack = mgmt_eth_data->ack; + + if (ret <= 0) + return -ETIMEDOUT; + + if (!ack) + return -EINVAL; + + *val = mgmt_eth_data->data[0]; + + return 0; +} + +static int +qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, + int regnum, u16 data) +{ + struct sk_buff *write_skb, *clear_skb, *read_skb; + struct qca8k_mgmt_eth_data *mgmt_eth_data; + u32 write_val, clear_val = 0, val; + struct net_device *mgmt_master; + int ret, ret1; + bool ack; + + if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) + return -EINVAL; + + mgmt_eth_data = &priv->mgmt_eth_data; + + write_val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | + QCA8K_MDIO_MASTER_PHY_ADDR(phy) | + QCA8K_MDIO_MASTER_REG_ADDR(regnum); + + if (read) { + write_val |= QCA8K_MDIO_MASTER_READ; + } else { + write_val |= QCA8K_MDIO_MASTER_WRITE; + write_val |= QCA8K_MDIO_MASTER_DATA(data); + } + + /* Prealloc all the needed skb before the lock */ + write_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &write_val, + QCA8K_ETHERNET_PHY_PRIORITY, sizeof(write_val)); + if (!write_skb) + return -ENOMEM; + + clear_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &clear_val, + QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); + if (!clear_skb) { + ret = -ENOMEM; + goto err_clear_skb; + } + + read_skb = qca8k_alloc_mdio_header(MDIO_READ, QCA8K_MDIO_MASTER_CTRL, &clear_val, + QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); + if (!read_skb) { + ret = -ENOMEM; + goto err_read_skb; + } + + /* Actually start the request: + * 1. Send mdio master packet + * 2. Busy Wait for mdio master command + * 3. Get the data if we are reading + * 4. Reset the mdio master (even with error) + */ + mutex_lock(&mgmt_eth_data->mutex); + + /* Check if mgmt_master is operational */ + mgmt_master = priv->mgmt_master; + if (!mgmt_master) { + mutex_unlock(&mgmt_eth_data->mutex); + ret = -EINVAL; + goto err_mgmt_master; + } + + read_skb->dev = mgmt_master; + clear_skb->dev = mgmt_master; + write_skb->dev = mgmt_master; + + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the write pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(write_skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(write_skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + QCA8K_ETHERNET_TIMEOUT); + + ack = mgmt_eth_data->ack; + + if (ret <= 0) { + ret = -ETIMEDOUT; + kfree_skb(read_skb); + goto exit; + } + + if (!ack) { + ret = -EINVAL; + kfree_skb(read_skb); + goto exit; + } + + ret = read_poll_timeout(qca8k_phy_eth_busy_wait, ret1, + !(val & QCA8K_MDIO_MASTER_BUSY), 0, + QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, + mgmt_eth_data, read_skb, &val); + + if (ret < 0 && ret1 < 0) { + ret = ret1; + goto exit; + } + + if (read) { + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the read pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(read_skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(read_skb); + + ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, + QCA8K_ETHERNET_TIMEOUT); + + ack = mgmt_eth_data->ack; + + if (ret <= 0) { + ret = -ETIMEDOUT; + goto exit; + } + + if (!ack) { + ret = -EINVAL; + goto exit; + } + + ret = mgmt_eth_data->data[0] & QCA8K_MDIO_MASTER_DATA_MASK; + } else { + kfree_skb(read_skb); + } +exit: + reinit_completion(&mgmt_eth_data->rw_done); + + /* Increment seq_num and set it in the clear pkt */ + mgmt_eth_data->seq++; + qca8k_mdio_header_fill_seq_num(clear_skb, mgmt_eth_data->seq); + mgmt_eth_data->ack = false; + + dev_queue_xmit(clear_skb); + + wait_for_completion_timeout(&mgmt_eth_data->rw_done, + QCA8K_ETHERNET_TIMEOUT); + + mutex_unlock(&mgmt_eth_data->mutex); + + return ret; + + /* Error handling before lock */ +err_mgmt_master: + kfree_skb(read_skb); +err_read_skb: + kfree_skb(clear_skb); +err_clear_skb: + kfree_skb(write_skb); + + return ret; +} + static u32 qca8k_port_to_phy(int port) { @@ -704,8 +1181,9 @@ qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) } static int -qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data) +qca8k_mdio_write(struct qca8k_priv *priv, int phy, int regnum, u16 data) { + struct mii_bus *bus = priv->bus; u16 r1, r2, page; u32 val; int ret; @@ -722,18 +1200,18 @@ qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data) mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); - ret = qca8k_set_page(bus, page); + ret = qca8k_set_page(priv, page); if (ret) goto exit; - qca8k_mii_write32(bus, 0x10 | r2, r1, val); + qca8k_mii_write32(priv, 0x10 | r2, r1, val); ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, QCA8K_MDIO_MASTER_BUSY); exit: /* even if the busy_wait timeouts try to clear the MASTER_EN */ - qca8k_mii_write32(bus, 0x10 | r2, r1, 0); + qca8k_mii_write32(priv, 0x10 | r2, r1, 0); mutex_unlock(&bus->mdio_lock); @@ -741,8 +1219,9 @@ exit: } static int -qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum) +qca8k_mdio_read(struct qca8k_priv *priv, int phy, int regnum) { + struct mii_bus *bus = priv->bus; u16 r1, r2, page; u32 val; int ret; @@ -758,11 +1237,11 @@ qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum) mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); - ret = qca8k_set_page(bus, page); + ret = qca8k_set_page(priv, page); if (ret) goto exit; - qca8k_mii_write32(bus, 0x10 | r2, r1, val); + qca8k_mii_write32(priv, 0x10 | r2, r1, val); ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, QCA8K_MDIO_MASTER_BUSY); @@ -773,7 +1252,7 @@ qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum) exit: /* even if the busy_wait timeouts try to clear the MASTER_EN */ - qca8k_mii_write32(bus, 0x10 | r2, r1, 0); + qca8k_mii_write32(priv, 0x10 | r2, r1, 0); mutex_unlock(&bus->mdio_lock); @@ -787,24 +1266,35 @@ static int qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data) { struct qca8k_priv *priv = slave_bus->priv; - struct mii_bus *bus = priv->bus; + int ret; - return qca8k_mdio_write(bus, phy, regnum, data); + /* Use mdio Ethernet when available, fallback to legacy one on error */ + ret = qca8k_phy_eth_command(priv, false, phy, regnum, data); + if (!ret) + return 0; + + return qca8k_mdio_write(priv, phy, regnum, data); } static int qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum) { struct qca8k_priv *priv = slave_bus->priv; - struct mii_bus *bus = priv->bus; + int ret; + + /* Use mdio Ethernet when available, fallback to legacy one on error */ + ret = qca8k_phy_eth_command(priv, true, phy, regnum, 0); + if (ret >= 0) + return ret; - return qca8k_mdio_read(bus, phy, regnum); + return qca8k_mdio_read(priv, phy, regnum); } static int qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data) { struct qca8k_priv *priv = ds->priv; + int ret; /* Check if the legacy mapping should be used and the * port is not correctly mapped to the right PHY in the @@ -813,7 +1303,12 @@ qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data) if (priv->legacy_phy_port_mapping) port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; - return qca8k_mdio_write(priv->bus, port, regnum, data); + /* Use mdio Ethernet when available, fallback to legacy one on error */ + ret = qca8k_phy_eth_command(priv, false, port, regnum, 0); + if (!ret) + return ret; + + return qca8k_mdio_write(priv, port, regnum, data); } static int @@ -829,7 +1324,12 @@ qca8k_phy_read(struct dsa_switch *ds, int port, int regnum) if (priv->legacy_phy_port_mapping) port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; - ret = qca8k_mdio_read(priv->bus, port, regnum); + /* Use mdio Ethernet when available, fallback to legacy one on error */ + ret = qca8k_phy_eth_command(priv, true, port, regnum, 0); + if (ret >= 0) + return ret; + + ret = qca8k_mdio_read(priv, port, regnum); if (ret < 0) return 0xffff; @@ -1132,220 +1632,6 @@ qca8k_parse_port_config(struct qca8k_priv *priv) return 0; } -static int -qca8k_setup(struct dsa_switch *ds) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - int cpu_port, ret, i; - u32 mask; - - cpu_port = qca8k_find_cpu_port(ds); - if (cpu_port < 0) { - dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6"); - return cpu_port; - } - - /* Parse CPU port config to be later used in phy_link mac_config */ - ret = qca8k_parse_port_config(priv); - if (ret) - return ret; - - ret = qca8k_setup_mdio_bus(priv); - if (ret) - return ret; - - ret = qca8k_setup_of_pws_reg(priv); - if (ret) - return ret; - - ret = qca8k_setup_mac_pwr_sel(priv); - if (ret) - return ret; - - /* Make sure MAC06 is disabled */ - ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL, - QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); - if (ret) { - dev_err(priv->dev, "failed disabling MAC06 exchange"); - return ret; - } - - /* Enable CPU Port */ - ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, - QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); - if (ret) { - dev_err(priv->dev, "failed enabling CPU port"); - return ret; - } - - /* Enable MIB counters */ - ret = qca8k_mib_init(priv); - if (ret) - dev_warn(priv->dev, "mib init failed"); - - /* Initial setup of all ports */ - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - /* Disable forwarding by default on all ports */ - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), - QCA8K_PORT_LOOKUP_MEMBER, 0); - if (ret) - return ret; - - /* Enable QCA header mode on all cpu ports */ - if (dsa_is_cpu_port(ds, i)) { - ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i), - FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) | - FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL)); - if (ret) { - dev_err(priv->dev, "failed enabling QCA header mode"); - return ret; - } - } - - /* Disable MAC by default on all user ports */ - if (dsa_is_user_port(ds, i)) - qca8k_port_set_status(priv, i, 0); - } - - /* Forward all unknown frames to CPU port for Linux processing - * Notice that in multi-cpu config only one port should be set - * for igmp, unknown, multicast and broadcast packet - */ - ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, - FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) | - FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) | - FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) | - FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port))); - if (ret) - return ret; - - /* Setup connection between CPU port & user ports - * Configure specific switch configuration for ports - */ - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - /* CPU port gets connected to all user ports of the switch */ - if (dsa_is_cpu_port(ds, i)) { - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), - QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); - if (ret) - return ret; - } - - /* Individual user ports get connected to CPU port only */ - if (dsa_is_user_port(ds, i)) { - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), - QCA8K_PORT_LOOKUP_MEMBER, - BIT(cpu_port)); - if (ret) - return ret; - - /* Enable ARP Auto-learning by default */ - ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i), - QCA8K_PORT_LOOKUP_LEARN); - if (ret) - return ret; - - /* For port based vlans to work we need to set the - * default egress vid - */ - ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i), - QCA8K_EGREES_VLAN_PORT_MASK(i), - QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF)); - if (ret) - return ret; - - ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i), - QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | - QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); - if (ret) - return ret; - } - - /* The port 5 of the qca8337 have some problem in flood condition. The - * original legacy driver had some specific buffer and priority settings - * for the different port suggested by the QCA switch team. Add this - * missing settings to improve switch stability under load condition. - * This problem is limited to qca8337 and other qca8k switch are not affected. - */ - if (priv->switch_id == QCA8K_ID_QCA8337) { - switch (i) { - /* The 2 CPU port and port 5 requires some different - * priority than any other ports. - */ - case 0: - case 5: - case 6: - mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | - QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | - QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) | - QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) | - QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) | - QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) | - QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e); - break; - default: - mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | - QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | - QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) | - QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) | - QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19); - } - qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask); - - mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) | - QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | - QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | - QCA8K_PORT_HOL_CTRL1_WRED_EN; - qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i), - QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK | - QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | - QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | - QCA8K_PORT_HOL_CTRL1_WRED_EN, - mask); - } - - /* Set initial MTU for every port. - * We have only have a general MTU setting. So track - * every port and set the max across all port. - * Set per port MTU to 1500 as the MTU change function - * will add the overhead and if its set to 1518 then it - * will apply the overhead again and we will end up with - * MTU of 1536 instead of 1518 - */ - priv->port_mtu[i] = ETH_DATA_LEN; - } - - /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ - if (priv->switch_id == QCA8K_ID_QCA8327) { - mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) | - QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496); - qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH, - QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK | - QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK, - mask); - } - - /* Setup our port MTUs to match power on defaults */ - ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); - if (ret) - dev_warn(priv->dev, "failed setting MTU settings"); - - /* Flush the FDB table */ - qca8k_fdb_flush(priv); - - /* We don't have interrupts for link changes, so we need to poll */ - ds->pcs_poll = true; - - /* Set min a max ageing value supported */ - ds->ageing_time_min = 7000; - ds->ageing_time_max = 458745000; - - /* Set max number of LAGs supported */ - ds->num_lag_ids = QCA8K_NUM_LAGS; - - return 0; -} - static void qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index, u32 reg) @@ -1387,13 +1673,41 @@ qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_inde cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6); } +static struct phylink_pcs * +qca8k_phylink_mac_select_pcs(struct dsa_switch *ds, int port, + phy_interface_t interface) +{ + struct qca8k_priv *priv = ds->priv; + struct phylink_pcs *pcs = NULL; + + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + switch (port) { + case 0: + pcs = &priv->pcs_port_0.pcs; + break; + + case 6: + pcs = &priv->pcs_port_6.pcs; + break; + } + break; + + default: + break; + } + + return pcs; +} + static void qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, const struct phylink_link_state *state) { struct qca8k_priv *priv = ds->priv; - int cpu_port_index, ret; - u32 reg, val; + int cpu_port_index; + u32 reg; switch (port) { case 0: /* 1st CPU port */ @@ -1459,70 +1773,6 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, case PHY_INTERFACE_MODE_1000BASEX: /* Enable SGMII on the port */ qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN); - - /* Enable/disable SerDes auto-negotiation as necessary */ - ret = qca8k_read(priv, QCA8K_REG_PWS, &val); - if (ret) - return; - if (phylink_autoneg_inband(mode)) - val &= ~QCA8K_PWS_SERDES_AEN_DIS; - else - val |= QCA8K_PWS_SERDES_AEN_DIS; - qca8k_write(priv, QCA8K_REG_PWS, val); - - /* Configure the SGMII parameters */ - ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); - if (ret) - return; - - val |= QCA8K_SGMII_EN_SD; - - if (priv->ports_config.sgmii_enable_pll) - val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | - QCA8K_SGMII_EN_TX; - - if (dsa_is_cpu_port(ds, port)) { - /* CPU port, we're talking to the CPU MAC, be a PHY */ - val &= ~QCA8K_SGMII_MODE_CTRL_MASK; - val |= QCA8K_SGMII_MODE_CTRL_PHY; - } else if (state->interface == PHY_INTERFACE_MODE_SGMII) { - val &= ~QCA8K_SGMII_MODE_CTRL_MASK; - val |= QCA8K_SGMII_MODE_CTRL_MAC; - } else if (state->interface == PHY_INTERFACE_MODE_1000BASEX) { - val &= ~QCA8K_SGMII_MODE_CTRL_MASK; - val |= QCA8K_SGMII_MODE_CTRL_BASEX; - } - - qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); - - /* From original code is reported port instability as SGMII also - * require delay set. Apply advised values here or take them from DT. - */ - if (state->interface == PHY_INTERFACE_MODE_SGMII) - qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); - - /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and - * falling edge is set writing in the PORT0 PAD reg - */ - if (priv->switch_id == QCA8K_ID_QCA8327 || - priv->switch_id == QCA8K_ID_QCA8337) - reg = QCA8K_REG_PORT0_PAD_CTRL; - - val = 0; - - /* SGMII Clock phase configuration */ - if (priv->ports_config.sgmii_rx_clk_falling_edge) - val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; - - if (priv->ports_config.sgmii_tx_clk_falling_edge) - val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; - - if (val) - ret = qca8k_rmw(priv, reg, - QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | - QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, - val); - break; default: dev_err(ds->dev, "xMII mode %s not supported for port %d\n", @@ -1531,109 +1781,41 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, } } -static void -qca8k_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) +static void qca8k_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) { - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - switch (port) { case 0: /* 1st CPU port */ - if (state->interface != PHY_INTERFACE_MODE_NA && - state->interface != PHY_INTERFACE_MODE_RGMII && - state->interface != PHY_INTERFACE_MODE_RGMII_ID && - state->interface != PHY_INTERFACE_MODE_RGMII_TXID && - state->interface != PHY_INTERFACE_MODE_RGMII_RXID && - state->interface != PHY_INTERFACE_MODE_SGMII) - goto unsupported; + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); break; + case 1: case 2: case 3: case 4: case 5: /* Internal PHY */ - if (state->interface != PHY_INTERFACE_MODE_NA && - state->interface != PHY_INTERFACE_MODE_GMII && - state->interface != PHY_INTERFACE_MODE_INTERNAL) - goto unsupported; - break; - case 6: /* 2nd CPU port / external PHY */ - if (state->interface != PHY_INTERFACE_MODE_NA && - state->interface != PHY_INTERFACE_MODE_RGMII && - state->interface != PHY_INTERFACE_MODE_RGMII_ID && - state->interface != PHY_INTERFACE_MODE_RGMII_TXID && - state->interface != PHY_INTERFACE_MODE_RGMII_RXID && - state->interface != PHY_INTERFACE_MODE_SGMII && - state->interface != PHY_INTERFACE_MODE_1000BASEX) - goto unsupported; + __set_bit(PHY_INTERFACE_MODE_GMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); break; - default: -unsupported: - linkmode_zero(supported); - return; - } - - phylink_set_port_modes(mask); - phylink_set(mask, Autoneg); - - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - if (state->interface == PHY_INTERFACE_MODE_1000BASEX) - phylink_set(mask, 1000baseX_Full); - - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); -} - -static int -qca8k_phylink_mac_link_state(struct dsa_switch *ds, int port, - struct phylink_link_state *state) -{ - struct qca8k_priv *priv = ds->priv; - u32 reg; - int ret; - - ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®); - if (ret < 0) - return ret; - - state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP); - state->an_complete = state->link; - state->an_enabled = !!(reg & QCA8K_PORT_STATUS_LINK_AUTO); - state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL : - DUPLEX_HALF; - - switch (reg & QCA8K_PORT_STATUS_SPEED) { - case QCA8K_PORT_STATUS_SPEED_10: - state->speed = SPEED_10; - break; - case QCA8K_PORT_STATUS_SPEED_100: - state->speed = SPEED_100; - break; - case QCA8K_PORT_STATUS_SPEED_1000: - state->speed = SPEED_1000; - break; - default: - state->speed = SPEED_UNKNOWN; + case 6: /* 2nd CPU port / external PHY */ + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + config->supported_interfaces); break; } - state->pause = MLO_PAUSE_NONE; - if (reg & QCA8K_PORT_STATUS_RXFLOW) - state->pause |= MLO_PAUSE_RX; - if (reg & QCA8K_PORT_STATUS_TXFLOW) - state->pause |= MLO_PAUSE_TX; + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000FD; - return 1; + config->legacy_pre_march2020 = false; } static void @@ -1686,6 +1868,164 @@ qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg); } +static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs) +{ + return container_of(pcs, struct qca8k_pcs, pcs); +} + +static void qca8k_pcs_get_state(struct phylink_pcs *pcs, + struct phylink_link_state *state) +{ + struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; + int port = pcs_to_qca8k_pcs(pcs)->port; + u32 reg; + int ret; + + ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®); + if (ret < 0) { + state->link = false; + return; + } + + state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP); + state->an_complete = state->link; + state->an_enabled = !!(reg & QCA8K_PORT_STATUS_LINK_AUTO); + state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL : + DUPLEX_HALF; + + switch (reg & QCA8K_PORT_STATUS_SPEED) { + case QCA8K_PORT_STATUS_SPEED_10: + state->speed = SPEED_10; + break; + case QCA8K_PORT_STATUS_SPEED_100: + state->speed = SPEED_100; + break; + case QCA8K_PORT_STATUS_SPEED_1000: + state->speed = SPEED_1000; + break; + default: + state->speed = SPEED_UNKNOWN; + break; + } + + if (reg & QCA8K_PORT_STATUS_RXFLOW) + state->pause |= MLO_PAUSE_RX; + if (reg & QCA8K_PORT_STATUS_TXFLOW) + state->pause |= MLO_PAUSE_TX; +} + +static int qca8k_pcs_config(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; + int cpu_port_index, ret, port; + u32 reg, val; + + port = pcs_to_qca8k_pcs(pcs)->port; + switch (port) { + case 0: + reg = QCA8K_REG_PORT0_PAD_CTRL; + cpu_port_index = QCA8K_CPU_PORT0; + break; + + case 6: + reg = QCA8K_REG_PORT6_PAD_CTRL; + cpu_port_index = QCA8K_CPU_PORT6; + break; + + default: + WARN_ON(1); + return -EINVAL; + } + + /* Enable/disable SerDes auto-negotiation as necessary */ + ret = qca8k_read(priv, QCA8K_REG_PWS, &val); + if (ret) + return ret; + if (phylink_autoneg_inband(mode)) + val &= ~QCA8K_PWS_SERDES_AEN_DIS; + else + val |= QCA8K_PWS_SERDES_AEN_DIS; + qca8k_write(priv, QCA8K_REG_PWS, val); + + /* Configure the SGMII parameters */ + ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); + if (ret) + return ret; + + val |= QCA8K_SGMII_EN_SD; + + if (priv->ports_config.sgmii_enable_pll) + val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | + QCA8K_SGMII_EN_TX; + + if (dsa_is_cpu_port(priv->ds, port)) { + /* CPU port, we're talking to the CPU MAC, be a PHY */ + val &= ~QCA8K_SGMII_MODE_CTRL_MASK; + val |= QCA8K_SGMII_MODE_CTRL_PHY; + } else if (interface == PHY_INTERFACE_MODE_SGMII) { + val &= ~QCA8K_SGMII_MODE_CTRL_MASK; + val |= QCA8K_SGMII_MODE_CTRL_MAC; + } else if (interface == PHY_INTERFACE_MODE_1000BASEX) { + val &= ~QCA8K_SGMII_MODE_CTRL_MASK; + val |= QCA8K_SGMII_MODE_CTRL_BASEX; + } + + qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); + + /* From original code is reported port instability as SGMII also + * require delay set. Apply advised values here or take them from DT. + */ + if (interface == PHY_INTERFACE_MODE_SGMII) + qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); + /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and + * falling edge is set writing in the PORT0 PAD reg + */ + if (priv->switch_id == QCA8K_ID_QCA8327 || + priv->switch_id == QCA8K_ID_QCA8337) + reg = QCA8K_REG_PORT0_PAD_CTRL; + + val = 0; + + /* SGMII Clock phase configuration */ + if (priv->ports_config.sgmii_rx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; + + if (priv->ports_config.sgmii_tx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; + + if (val) + ret = qca8k_rmw(priv, reg, + QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | + QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, + val); + + return 0; +} + +static void qca8k_pcs_an_restart(struct phylink_pcs *pcs) +{ +} + +static const struct phylink_pcs_ops qca8k_pcs_ops = { + .pcs_get_state = qca8k_pcs_get_state, + .pcs_config = qca8k_pcs_config, + .pcs_an_restart = qca8k_pcs_an_restart, +}; + +static void qca8k_setup_pcs(struct qca8k_priv *priv, struct qca8k_pcs *qpcs, + int port) +{ + qpcs->pcs.ops = &qca8k_pcs_ops; + + /* We don't have interrupts for link changes, so we need to poll */ + qpcs->pcs.poll = true; + qpcs->priv = priv; + qpcs->port = port; +} + static void qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) { @@ -1703,6 +2043,97 @@ qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) ETH_GSTRING_LEN); } +static void qca8k_mib_autocast_handler(struct dsa_switch *ds, struct sk_buff *skb) +{ + const struct qca8k_match_data *match_data; + struct qca8k_mib_eth_data *mib_eth_data; + struct qca8k_priv *priv = ds->priv; + const struct qca8k_mib_desc *mib; + struct mib_ethhdr *mib_ethhdr; + int i, mib_len, offset = 0; + u64 *data; + u8 port; + + mib_ethhdr = (struct mib_ethhdr *)skb_mac_header(skb); + mib_eth_data = &priv->mib_eth_data; + + /* The switch autocast every port. Ignore other packet and + * parse only the requested one. + */ + port = FIELD_GET(QCA_HDR_RECV_SOURCE_PORT, ntohs(mib_ethhdr->hdr)); + if (port != mib_eth_data->req_port) + goto exit; + + match_data = device_get_match_data(priv->dev); + data = mib_eth_data->data; + + for (i = 0; i < match_data->mib_count; i++) { + mib = &ar8327_mib[i]; + + /* First 3 mib are present in the skb head */ + if (i < 3) { + data[i] = mib_ethhdr->data[i]; + continue; + } + + mib_len = sizeof(uint32_t); + + /* Some mib are 64 bit wide */ + if (mib->size == 2) + mib_len = sizeof(uint64_t); + + /* Copy the mib value from packet to the */ + memcpy(data + i, skb->data + offset, mib_len); + + /* Set the offset for the next mib */ + offset += mib_len; + } + +exit: + /* Complete on receiving all the mib packet */ + if (refcount_dec_and_test(&mib_eth_data->port_parsed)) + complete(&mib_eth_data->rw_done); +} + +static int +qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct qca8k_mib_eth_data *mib_eth_data; + struct qca8k_priv *priv = ds->priv; + int ret; + + mib_eth_data = &priv->mib_eth_data; + + mutex_lock(&mib_eth_data->mutex); + + reinit_completion(&mib_eth_data->rw_done); + + mib_eth_data->req_port = dp->index; + mib_eth_data->data = data; + refcount_set(&mib_eth_data->port_parsed, QCA8K_NUM_PORTS); + + mutex_lock(&priv->reg_mutex); + + /* Send mib autocast request */ + ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB, + QCA8K_MIB_FUNC | QCA8K_MIB_BUSY, + FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_CAST) | + QCA8K_MIB_BUSY); + + mutex_unlock(&priv->reg_mutex); + + if (ret) + goto exit; + + ret = wait_for_completion_timeout(&mib_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT); + +exit: + mutex_unlock(&mib_eth_data->mutex); + + return ret; +} + static void qca8k_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) @@ -1714,6 +2145,10 @@ qca8k_get_ethtool_stats(struct dsa_switch *ds, int port, u32 hi = 0; int ret; + if (priv->mgmt_master && + qca8k_get_ethtool_stats_eth(ds, port, data) > 0) + return; + match_data = of_device_get_match_data(priv->dev); for (i = 0; i < match_data->mib_count; i++) { @@ -1812,7 +2247,8 @@ qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) static int qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, - bool *tx_fwd_offload) + bool *tx_fwd_offload, + struct netlink_ext_ack *extack) { struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; int port_mask, cpu_port; @@ -1963,7 +2399,8 @@ qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr, static int qca8k_port_fdb_add(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) + const unsigned char *addr, u16 vid, + struct dsa_db db) { struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; u16 port_mask = BIT(port); @@ -1973,7 +2410,8 @@ qca8k_port_fdb_add(struct dsa_switch *ds, int port, static int qca8k_port_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) + const unsigned char *addr, u16 vid, + struct dsa_db db) { struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; u16 port_mask = BIT(port); @@ -2010,7 +2448,8 @@ qca8k_port_fdb_dump(struct dsa_switch *ds, int port, static int qca8k_port_mdb_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_mdb *mdb) + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) { struct qca8k_priv *priv = ds->priv; const u8 *addr = mdb->addr; @@ -2021,7 +2460,8 @@ qca8k_port_mdb_add(struct dsa_switch *ds, int port, static int qca8k_port_mdb_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_mdb *mdb) + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) { struct qca8k_priv *priv = ds->priv; const u8 *addr = mdb->addr; @@ -2033,7 +2473,7 @@ qca8k_port_mdb_del(struct dsa_switch *ds, int port, static int qca8k_port_mirror_add(struct dsa_switch *ds, int port, struct dsa_mall_mirror_tc_entry *mirror, - bool ingress) + bool ingress, struct netlink_ext_ack *extack) { struct qca8k_priv *priv = ds->priv; int monitor_port, ret; @@ -2212,18 +2652,16 @@ qca8k_get_tag_protocol(struct dsa_switch *ds, int port, } static bool -qca8k_lag_can_offload(struct dsa_switch *ds, - struct net_device *lag, +qca8k_lag_can_offload(struct dsa_switch *ds, struct dsa_lag lag, struct netdev_lag_upper_info *info) { struct dsa_port *dp; - int id, members = 0; + int members = 0; - id = dsa_lag_id(ds->dst, lag); - if (id < 0 || id >= ds->num_lag_ids) + if (!lag.id) return false; - dsa_lag_foreach_port(dp, ds->dst, lag) + dsa_lag_foreach_port(dp, ds->dst, &lag) /* Includes the port joining the LAG */ members++; @@ -2241,16 +2679,14 @@ qca8k_lag_can_offload(struct dsa_switch *ds, } static int -qca8k_lag_setup_hash(struct dsa_switch *ds, - struct net_device *lag, +qca8k_lag_setup_hash(struct dsa_switch *ds, struct dsa_lag lag, struct netdev_lag_upper_info *info) { + struct net_device *lag_dev = lag.dev; struct qca8k_priv *priv = ds->priv; bool unique_lag = true; + unsigned int i; u32 hash = 0; - int i, id; - - id = dsa_lag_id(ds->dst, lag); switch (info->hash_type) { case NETDEV_LAG_HASH_L23: @@ -2267,7 +2703,7 @@ qca8k_lag_setup_hash(struct dsa_switch *ds, /* Check if we are the unique configured LAG */ dsa_lags_foreach_id(i, ds->dst) - if (i != id && dsa_lag_dev(ds->dst, i)) { + if (i != lag.id && dsa_lag_by_id(ds->dst, i)) { unique_lag = false; break; } @@ -2282,7 +2718,7 @@ qca8k_lag_setup_hash(struct dsa_switch *ds, if (unique_lag) { priv->lag_hash_mode = hash; } else if (priv->lag_hash_mode != hash) { - netdev_err(lag, "Error: Mismatched Hash Mode across different lag is not supported\n"); + netdev_err(lag_dev, "Error: Mismatched Hash Mode across different lag is not supported\n"); return -EOPNOTSUPP; } @@ -2292,13 +2728,14 @@ qca8k_lag_setup_hash(struct dsa_switch *ds, static int qca8k_lag_refresh_portmap(struct dsa_switch *ds, int port, - struct net_device *lag, bool delete) + struct dsa_lag lag, bool delete) { struct qca8k_priv *priv = ds->priv; int ret, id, i; u32 val; - id = dsa_lag_id(ds->dst, lag); + /* DSA LAG IDs are one-based, hardware is zero-based */ + id = lag.id - 1; /* Read current port member */ ret = regmap_read(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL0, &val); @@ -2360,8 +2797,7 @@ qca8k_lag_refresh_portmap(struct dsa_switch *ds, int port, } static int -qca8k_port_lag_join(struct dsa_switch *ds, int port, - struct net_device *lag, +qca8k_port_lag_join(struct dsa_switch *ds, int port, struct dsa_lag lag, struct netdev_lag_upper_info *info) { int ret; @@ -2378,11 +2814,265 @@ qca8k_port_lag_join(struct dsa_switch *ds, int port, static int qca8k_port_lag_leave(struct dsa_switch *ds, int port, - struct net_device *lag) + struct dsa_lag lag) { return qca8k_lag_refresh_portmap(ds, port, lag, true); } +static void +qca8k_master_change(struct dsa_switch *ds, const struct net_device *master, + bool operational) +{ + struct dsa_port *dp = master->dsa_ptr; + struct qca8k_priv *priv = ds->priv; + + /* Ethernet MIB/MDIO is only supported for CPU port 0 */ + if (dp->index != 0) + return; + + mutex_lock(&priv->mgmt_eth_data.mutex); + mutex_lock(&priv->mib_eth_data.mutex); + + priv->mgmt_master = operational ? (struct net_device *)master : NULL; + + mutex_unlock(&priv->mib_eth_data.mutex); + mutex_unlock(&priv->mgmt_eth_data.mutex); +} + +static int qca8k_connect_tag_protocol(struct dsa_switch *ds, + enum dsa_tag_protocol proto) +{ + struct qca_tagger_data *tagger_data; + + switch (proto) { + case DSA_TAG_PROTO_QCA: + tagger_data = ds->tagger_data; + + tagger_data->rw_reg_ack_handler = qca8k_rw_reg_ack_handler; + tagger_data->mib_autocast_handler = qca8k_mib_autocast_handler; + + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int +qca8k_setup(struct dsa_switch *ds) +{ + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + int cpu_port, ret, i; + u32 mask; + + cpu_port = qca8k_find_cpu_port(ds); + if (cpu_port < 0) { + dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6"); + return cpu_port; + } + + /* Parse CPU port config to be later used in phy_link mac_config */ + ret = qca8k_parse_port_config(priv); + if (ret) + return ret; + + ret = qca8k_setup_mdio_bus(priv); + if (ret) + return ret; + + ret = qca8k_setup_of_pws_reg(priv); + if (ret) + return ret; + + ret = qca8k_setup_mac_pwr_sel(priv); + if (ret) + return ret; + + qca8k_setup_pcs(priv, &priv->pcs_port_0, 0); + qca8k_setup_pcs(priv, &priv->pcs_port_6, 6); + + /* Make sure MAC06 is disabled */ + ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL, + QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); + if (ret) { + dev_err(priv->dev, "failed disabling MAC06 exchange"); + return ret; + } + + /* Enable CPU Port */ + ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, + QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); + if (ret) { + dev_err(priv->dev, "failed enabling CPU port"); + return ret; + } + + /* Enable MIB counters */ + ret = qca8k_mib_init(priv); + if (ret) + dev_warn(priv->dev, "mib init failed"); + + /* Initial setup of all ports */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* Disable forwarding by default on all ports */ + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, 0); + if (ret) + return ret; + + /* Enable QCA header mode on all cpu ports */ + if (dsa_is_cpu_port(ds, i)) { + ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i), + FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) | + FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL)); + if (ret) { + dev_err(priv->dev, "failed enabling QCA header mode"); + return ret; + } + } + + /* Disable MAC by default on all user ports */ + if (dsa_is_user_port(ds, i)) + qca8k_port_set_status(priv, i, 0); + } + + /* Forward all unknown frames to CPU port for Linux processing + * Notice that in multi-cpu config only one port should be set + * for igmp, unknown, multicast and broadcast packet + */ + ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, + FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) | + FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) | + FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) | + FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port))); + if (ret) + return ret; + + /* Setup connection between CPU port & user ports + * Configure specific switch configuration for ports + */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* CPU port gets connected to all user ports of the switch */ + if (dsa_is_cpu_port(ds, i)) { + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); + if (ret) + return ret; + } + + /* Individual user ports get connected to CPU port only */ + if (dsa_is_user_port(ds, i)) { + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, + BIT(cpu_port)); + if (ret) + return ret; + + /* Enable ARP Auto-learning by default */ + ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_LEARN); + if (ret) + return ret; + + /* For port based vlans to work we need to set the + * default egress vid + */ + ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i), + QCA8K_EGREES_VLAN_PORT_MASK(i), + QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF)); + if (ret) + return ret; + + ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i), + QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | + QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); + if (ret) + return ret; + } + + /* The port 5 of the qca8337 have some problem in flood condition. The + * original legacy driver had some specific buffer and priority settings + * for the different port suggested by the QCA switch team. Add this + * missing settings to improve switch stability under load condition. + * This problem is limited to qca8337 and other qca8k switch are not affected. + */ + if (priv->switch_id == QCA8K_ID_QCA8337) { + switch (i) { + /* The 2 CPU port and port 5 requires some different + * priority than any other ports. + */ + case 0: + case 5: + case 6: + mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | + QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | + QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) | + QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) | + QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) | + QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) | + QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e); + break; + default: + mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) | + QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) | + QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) | + QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) | + QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19); + } + qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask); + + mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) | + QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | + QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | + QCA8K_PORT_HOL_CTRL1_WRED_EN; + qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i), + QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK | + QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN | + QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN | + QCA8K_PORT_HOL_CTRL1_WRED_EN, + mask); + } + + /* Set initial MTU for every port. + * We have only have a general MTU setting. So track + * every port and set the max across all port. + * Set per port MTU to 1500 as the MTU change function + * will add the overhead and if its set to 1518 then it + * will apply the overhead again and we will end up with + * MTU of 1536 instead of 1518 + */ + priv->port_mtu[i] = ETH_DATA_LEN; + } + + /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ + if (priv->switch_id == QCA8K_ID_QCA8327) { + mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) | + QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496); + qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH, + QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK | + QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK, + mask); + } + + /* Setup our port MTUs to match power on defaults */ + ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); + if (ret) + dev_warn(priv->dev, "failed setting MTU settings"); + + /* Flush the FDB table */ + qca8k_fdb_flush(priv); + + /* Set min a max ageing value supported */ + ds->ageing_time_min = 7000; + ds->ageing_time_max = 458745000; + + /* Set max number of LAGs supported */ + ds->num_lag_ids = QCA8K_NUM_LAGS; + + return 0; +} + static const struct dsa_switch_ops qca8k_switch_ops = { .get_tag_protocol = qca8k_get_tag_protocol, .setup = qca8k_setup, @@ -2410,14 +3100,16 @@ static const struct dsa_switch_ops qca8k_switch_ops = { .port_vlan_filtering = qca8k_port_vlan_filtering, .port_vlan_add = qca8k_port_vlan_add, .port_vlan_del = qca8k_port_vlan_del, - .phylink_validate = qca8k_phylink_validate, - .phylink_mac_link_state = qca8k_phylink_mac_link_state, + .phylink_get_caps = qca8k_phylink_get_caps, + .phylink_mac_select_pcs = qca8k_phylink_mac_select_pcs, .phylink_mac_config = qca8k_phylink_mac_config, .phylink_mac_link_down = qca8k_phylink_mac_link_down, .phylink_mac_link_up = qca8k_phylink_mac_link_up, .get_phy_flags = qca8k_get_phy_flags, .port_lag_join = qca8k_port_lag_join, .port_lag_leave = qca8k_port_lag_leave, + .master_state_change = qca8k_master_change, + .connect_tag_protocol = qca8k_connect_tag_protocol, }; static int qca8k_read_switch_id(struct qca8k_priv *priv) @@ -2488,6 +3180,10 @@ qca8k_sw_probe(struct mdio_device *mdiodev) return PTR_ERR(priv->regmap); } + priv->mdio_cache.page = 0xffff; + priv->mdio_cache.lo = 0xffff; + priv->mdio_cache.hi = 0xffff; + /* Check the detected switch id */ ret = qca8k_read_switch_id(priv); if (ret) @@ -2497,6 +3193,12 @@ qca8k_sw_probe(struct mdio_device *mdiodev) if (!priv->ds) return -ENOMEM; + mutex_init(&priv->mgmt_eth_data.mutex); + init_completion(&priv->mgmt_eth_data.rw_done); + + mutex_init(&priv->mib_eth_data.mutex); + init_completion(&priv->mib_eth_data.rw_done); + priv->ds->dev = &mdiodev->dev; priv->ds->num_ports = QCA8K_NUM_PORTS; priv->ds->priv = priv; |