diff options
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r-- | drivers/mtd/nand/Kconfig | 6 | ||||
-rw-r--r-- | drivers/mtd/nand/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/nand/spia.c | 176 |
3 files changed, 0 insertions, 183 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index e6e0a82cbaaf..531807dec6b3 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -79,12 +79,6 @@ config MTD_NAND_GPIO help This enables a GPIO based NAND flash driver. -config MTD_NAND_SPIA - tristate "NAND Flash device on SPIA board" - depends on ARCH_P720T - help - If you had to ask, you don't have one. Say 'N'. - config MTD_NAND_AMS_DELTA tristate "NAND Flash device on Amstrad E3" depends on MACH_AMS_DELTA diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 0b1fca24866c..6c7f2b3ca8ae 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o obj-$(CONFIG_MTD_SM_COMMON) += sm_common.o obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o -obj-$(CONFIG_MTD_NAND_SPIA) += spia.o obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o obj-$(CONFIG_MTD_NAND_DENALI) += denali.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c deleted file mode 100644 index bef76cd7c24c..000000000000 --- a/drivers/mtd/nand/spia.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * drivers/mtd/nand/spia.c - * - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * - * - * 10-29-2001 TG change to support hardwarespecific access - * to controllines (due to change in nand.c) - * page_cache added - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the NAND flash device found on the - * SPIA board which utilizes the Toshiba TC58V64AFT part. This is - * a 64Mibit (8MiB x 8 bits) NAND flash device. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <asm/io.h> - -/* - * MTD structure for SPIA board - */ -static struct mtd_info *spia_mtd = NULL; - -/* - * Values specific to the SPIA board (used with EP7212 processor) - */ -#define SPIA_IO_BASE 0xd0000000 /* Start of EP7212 IO address space */ -#define SPIA_FIO_BASE 0xf0000000 /* Address where flash is mapped */ -#define SPIA_PEDR 0x0080 /* - * IO offset to Port E data register - * where the CLE, ALE and NCE pins - * are wired to. - */ -#define SPIA_PEDDR 0x00c0 /* - * IO offset to Port E data direction - * register so we can control the IO - * lines. - */ - -/* - * Module stuff - */ - -static int spia_io_base = SPIA_IO_BASE; -static int spia_fio_base = SPIA_FIO_BASE; -static int spia_pedr = SPIA_PEDR; -static int spia_peddr = SPIA_PEDDR; - -module_param(spia_io_base, int, 0); -module_param(spia_fio_base, int, 0); -module_param(spia_pedr, int, 0); -module_param(spia_peddr, int, 0); - -/* - * Define partitions for flash device - */ -static const struct mtd_partition partition_info[] = { - { - .name = "SPIA flash partition 1", - .offset = 0, - .size = 2 * 1024 * 1024}, - { - .name = "SPIA flash partition 2", - .offset = 2 * 1024 * 1024, - .size = 6 * 1024 * 1024} -}; - -#define NUM_PARTITIONS 2 - -/* - * hardware specific access to control-lines - * - * ctrl: - * NAND_CNE: bit 0 -> bit 2 - * NAND_CLE: bit 1 -> bit 0 - * NAND_ALE: bit 2 -> bit 1 - */ -static void spia_hwcontrol(struct mtd_info *mtd, int cmd) -{ - struct nand_chip *chip = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr = spia_io_base + spia_pedr; - unsigned char bits; - - bits = (ctrl & NAND_CNE) << 2; - bits |= (ctrl & NAND_CLE | NAND_ALE) >> 1; - writeb((readb(addr) & ~0x7) | bits, addr); - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -/* - * Main initialization routine - */ -static int __init spia_init(void) -{ - struct nand_chip *this; - - /* Allocate memory for MTD device structure and private data */ - spia_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!spia_mtd) { - printk("Unable to allocate SPIA NAND MTD device structure.\n"); - return -ENOMEM; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&spia_mtd[1]); - - /* Initialize structures */ - memset(spia_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - spia_mtd->priv = this; - spia_mtd->owner = THIS_MODULE; - - /* - * Set GPIO Port E control register so that the pins are configured - * to be outputs for controlling the NAND flash. - */ - (*(volatile unsigned char *)(spia_io_base + spia_peddr)) = 0x07; - - /* Set address of NAND IO lines */ - this->IO_ADDR_R = (void __iomem *)spia_fio_base; - this->IO_ADDR_W = (void __iomem *)spia_fio_base; - /* Set address of hardware control function */ - this->cmd_ctrl = spia_hwcontrol; - /* 15 us command delay time */ - this->chip_delay = 15; - - /* Scan to find existence of the device */ - if (nand_scan(spia_mtd, 1)) { - kfree(spia_mtd); - return -ENXIO; - } - - /* Register the partitions */ - mtd_device_register(spia_mtd, partition_info, NUM_PARTITIONS); - - /* Return happy */ - return 0; -} - -module_init(spia_init); - -/* - * Clean up routine - */ -static void __exit spia_cleanup(void) -{ - /* Release resources, unregister device */ - nand_release(spia_mtd); - - /* Free the MTD device structure */ - kfree(spia_mtd); -} - -module_exit(spia_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com"); -MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on SPIA board"); |