summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/maps/physmap-ixp4xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/maps/physmap-ixp4xx.c')
-rw-r--r--drivers/mtd/maps/physmap-ixp4xx.c132
1 files changed, 132 insertions, 0 deletions
diff --git a/drivers/mtd/maps/physmap-ixp4xx.c b/drivers/mtd/maps/physmap-ixp4xx.c
new file mode 100644
index 000000000000..6a054229a8a0
--- /dev/null
+++ b/drivers/mtd/maps/physmap-ixp4xx.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel IXP4xx OF physmap add-on
+ * Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the ixp4xx.c map driver, originally written by:
+ * Intel Corporation
+ * Deepak Saxena <dsaxena@mvista.com>
+ * Copyright (C) 2002 Intel Corporation
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ */
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/xip.h>
+#include "physmap-ixp4xx.h"
+
+/*
+ * Read/write a 16 bit word from flash address 'addr'.
+ *
+ * When the cpu is in little-endian mode it swizzles the address lines
+ * ('address coherency') so we need to undo the swizzling to ensure commands
+ * and the like end up on the correct flash address.
+ *
+ * To further complicate matters, due to the way the expansion bus controller
+ * handles 32 bit reads, the byte stream ABCD is stored on the flash as:
+ * D15 D0
+ * +---+---+
+ * | A | B | 0
+ * +---+---+
+ * | C | D | 2
+ * +---+---+
+ * This means that on LE systems each 16 bit word must be swapped. Note that
+ * this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI
+ * data and other flash commands which are always in D7-D0.
+ */
+#ifndef CONFIG_CPU_BIG_ENDIAN
+
+static inline u16 flash_read16(void __iomem *addr)
+{
+ return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2)));
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+ __raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2));
+}
+
+#define BYTE0(h) ((h) & 0xFF)
+#define BYTE1(h) (((h) >> 8) & 0xFF)
+
+#else
+
+static inline u16 flash_read16(const void __iomem *addr)
+{
+ return __raw_readw(addr);
+}
+
+static inline void flash_write16(u16 d, void __iomem *addr)
+{
+ __raw_writew(d, addr);
+}
+
+#define BYTE0(h) (((h) >> 8) & 0xFF)
+#define BYTE1(h) ((h) & 0xFF)
+#endif
+
+static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
+{
+ map_word val;
+
+ val.x[0] = flash_read16(map->virt + ofs);
+ return val;
+}
+
+/*
+ * The IXP4xx expansion bus only allows 16-bit wide acceses
+ * when attached to a 16-bit wide device (such as the 28F128J3A),
+ * so we can't just memcpy_fromio().
+ */
+static void ixp4xx_copy_from(struct map_info *map, void *to,
+ unsigned long from, ssize_t len)
+{
+ u8 *dest = (u8 *) to;
+ void __iomem *src = map->virt + from;
+
+ if (len <= 0)
+ return;
+
+ if (from & 1) {
+ *dest++ = BYTE1(flash_read16(src-1));
+ src++;
+ --len;
+ }
+
+ while (len >= 2) {
+ u16 data = flash_read16(src);
+ *dest++ = BYTE0(data);
+ *dest++ = BYTE1(data);
+ src += 2;
+ len -= 2;
+ }
+
+ if (len > 0)
+ *dest++ = BYTE0(flash_read16(src));
+}
+
+static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+ flash_write16(d.x[0], map->virt + adr);
+}
+
+int of_flash_probe_ixp4xx(struct platform_device *pdev,
+ struct device_node *np,
+ struct map_info *map)
+{
+ struct device *dev = &pdev->dev;
+
+ /* Multiplatform guard */
+ if (!of_device_is_compatible(np, "intel,ixp4xx-flash"))
+ return 0;
+
+ map->read = ixp4xx_read16;
+ map->write = ixp4xx_write16;
+ map->copy_from = ixp4xx_copy_from;
+ map->copy_to = NULL;
+
+ dev_info(dev, "initialized Intel IXP4xx-specific physmap control\n");
+
+ return 0;
+}