diff options
Diffstat (limited to 'drivers/mtd/maps/db1x00-flash.c')
| -rw-r--r-- | drivers/mtd/maps/db1x00-flash.c | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/drivers/mtd/maps/db1x00-flash.c b/drivers/mtd/maps/db1x00-flash.c deleted file mode 100644 index faa68ec56902..000000000000 --- a/drivers/mtd/maps/db1x00-flash.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * Flash memory access on Alchemy Db1xxx boards - * - * $Id: db1x00-flash.c,v 1.6 2004/11/04 13:24:14 gleixner Exp $ - * - * (C) 2003 Pete Popov <ppopov@embeddedalley.com> - * - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> - -#ifdef DEBUG_RW -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* MTD CONFIG OPTIONS */ -#if defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER) -#define DB1X00_BOTH_BANKS -#elif defined(CONFIG_MTD_DB1X00_BOOT) && !defined(CONFIG_MTD_DB1X00_USER) -#define DB1X00_BOOT_ONLY -#elif !defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER) -#define DB1X00_USER_ONLY -#endif - -static unsigned long window_addr; -static unsigned long window_size; -static unsigned long flash_size; - -static unsigned short *bcsr = (unsigned short *)0xAE000000; -static unsigned char flash_bankwidth = 4; - -/* - * The Db1x boards support different flash densities. We setup - * the mtd_partition structures below for default of 64Mbit - * flash densities, and override the partitions sizes, if - * necessary, after we check the board status register. - */ - -#ifdef DB1X00_BOTH_BANKS -/* both banks will be used. Combine the first bank and the first - * part of the second bank together into a single jffs/jffs2 - * partition. - */ -static struct mtd_partition db1x00_partitions[] = { - { - .name = "User FS", - .size = 0x1c00000, - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = (0x300000-0x40000), /* last 256KB is env */ - .offset = MTDPART_OFS_APPEND, - } -}; -#elif defined(DB1X00_BOOT_ONLY) -static struct mtd_partition db1x00_partitions[] = { - { - .name = "User FS", - .size = 0x00c00000, - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = (0x300000-0x40000), /* last 256KB is env */ - .offset = MTDPART_OFS_APPEND, - } -}; -#elif defined(DB1X00_USER_ONLY) -static struct mtd_partition db1x00_partitions[] = { - { - .name = "User FS", - .size = 0x0e00000, - .offset = 0x0000000 - },{ - .name = "raw kernel", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; -#else -#error MTD_DB1X00 define combo error /* should never happen */ -#endif -#define NB_OF(x) (sizeof(x)/sizeof(x[0])) - -#define NAME "Db1x00 Linux Flash" - -static struct map_info db1xxx_mtd_map = { - .name = NAME, -}; - -static struct mtd_partition *parsed_parts; -static struct mtd_info *db1xxx_mtd; - -/* - * Probe the flash density and setup window address and size - * based on user CONFIG options. There are times when we don't - * want the MTD driver to be probing the boot or user flash, - * so having the option to enable only one bank is important. - */ -int setup_flash_params(void) -{ - switch ((bcsr[2] >> 14) & 0x3) { - case 0: /* 64Mbit devices */ - flash_size = 0x800000; /* 8MB per part */ -#if defined(DB1X00_BOTH_BANKS) - window_addr = 0x1E000000; - window_size = 0x2000000; -#elif defined(DB1X00_BOOT_ONLY) - window_addr = 0x1F000000; - window_size = 0x1000000; -#else /* USER ONLY */ - window_addr = 0x1E000000; - window_size = 0x1000000; -#endif - break; - case 1: - /* 128 Mbit devices */ - flash_size = 0x1000000; /* 16MB per part */ -#if defined(DB1X00_BOTH_BANKS) - window_addr = 0x1C000000; - window_size = 0x4000000; - /* USERFS from 0x1C00 0000 to 0x1FC0 0000 */ - db1x00_partitions[0].size = 0x3C00000; -#elif defined(DB1X00_BOOT_ONLY) - window_addr = 0x1E000000; - window_size = 0x2000000; - /* USERFS from 0x1E00 0000 to 0x1FC0 0000 */ - db1x00_partitions[0].size = 0x1C00000; -#else /* USER ONLY */ - window_addr = 0x1C000000; - window_size = 0x2000000; - /* USERFS from 0x1C00 0000 to 0x1DE00000 */ - db1x00_partitions[0].size = 0x1DE0000; -#endif - break; - case 2: - /* 256 Mbit devices */ - flash_size = 0x4000000; /* 64MB per part */ -#if defined(DB1X00_BOTH_BANKS) - return 1; -#elif defined(DB1X00_BOOT_ONLY) - /* Boot ROM flash bank only; no user bank */ - window_addr = 0x1C000000; - window_size = 0x4000000; - /* USERFS from 0x1C00 0000 to 0x1FC00000 */ - db1x00_partitions[0].size = 0x3C00000; -#else /* USER ONLY */ - return 1; -#endif - break; - default: - return 1; - } - db1xxx_mtd_map.size = window_size; - db1xxx_mtd_map.bankwidth = flash_bankwidth; - db1xxx_mtd_map.phys = window_addr; - db1xxx_mtd_map.bankwidth = flash_bankwidth; - return 0; -} - -int __init db1x00_mtd_init(void) -{ - struct mtd_partition *parts; - int nb_parts = 0; - - if (setup_flash_params()) - return -ENXIO; - - /* - * Static partition definition selection - */ - parts = db1x00_partitions; - nb_parts = NB_OF(db1x00_partitions); - - /* - * Now let's probe for the actual flash. Do it here since - * specific machine settings might have been set above. - */ - printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n", - db1xxx_mtd_map.bankwidth*8); - db1xxx_mtd_map.virt = ioremap(window_addr, window_size); - db1xxx_mtd = do_map_probe("cfi_probe", &db1xxx_mtd_map); - if (!db1xxx_mtd) return -ENXIO; - db1xxx_mtd->owner = THIS_MODULE; - - add_mtd_partitions(db1xxx_mtd, parts, nb_parts); - return 0; -} - -static void __exit db1x00_mtd_cleanup(void) -{ - if (db1xxx_mtd) { - del_mtd_partitions(db1xxx_mtd); - map_destroy(db1xxx_mtd); - if (parsed_parts) - kfree(parsed_parts); - } -} - -module_init(db1x00_mtd_init); -module_exit(db1x00_mtd_cleanup); - -MODULE_AUTHOR("Pete Popov"); -MODULE_DESCRIPTION("Db1x00 mtd map driver"); -MODULE_LICENSE("GPL"); |