diff options
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/mmc.c | 83 | ||||
-rw-r--r-- | drivers/mmc/sdhci.c | 25 |
2 files changed, 58 insertions, 50 deletions
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 5046a1661342..4a73e8b2428d 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -376,10 +376,11 @@ static inline void mmc_set_ios(struct mmc_host *host) { struct mmc_ios *ios = &host->ios; - pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n", + pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u " + "width %u timing %u\n", mmc_hostname(host), ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select, ios->vdd, - ios->bus_width); + ios->bus_width, ios->timing); host->ops->set_ios(host, ios); } @@ -809,6 +810,7 @@ static void mmc_power_up(struct mmc_host *host) host->ios.chip_select = MMC_CS_DONTCARE; host->ios.power_mode = MMC_POWER_UP; host->ios.bus_width = MMC_BUS_WIDTH_1; + host->ios.timing = MMC_TIMING_LEGACY; mmc_set_ios(host); mmc_delay(1); @@ -828,6 +830,7 @@ static void mmc_power_off(struct mmc_host *host) host->ios.chip_select = MMC_CS_DONTCARE; host->ios.power_mode = MMC_POWER_OFF; host->ios.bus_width = MMC_BUS_WIDTH_1; + host->ios.timing = MMC_TIMING_LEGACY; mmc_set_ios(host); } @@ -1112,46 +1115,50 @@ static void mmc_process_ext_csds(struct mmc_host *host) continue; } - /* Activate highspeed support. */ - cmd.opcode = MMC_SWITCH; - cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_HS_TIMING << 16) | - (1 << 8) | - EXT_CSD_CMD_SET_NORMAL; - cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + if (host->caps & MMC_CAP_MMC_HIGHSPEED) { + /* Activate highspeed support. */ + cmd.opcode = MMC_SWITCH; + cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_HS_TIMING << 16) | + (1 << 8) | + EXT_CSD_CMD_SET_NORMAL; + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; - err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); - if (err != MMC_ERR_NONE) { - printk("%s: failed to switch card to mmc v4 " - "high-speed mode.\n", - mmc_hostname(card->host)); - continue; - } + err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); + if (err != MMC_ERR_NONE) { + printk("%s: failed to switch card to mmc v4 " + "high-speed mode.\n", + mmc_hostname(card->host)); + continue; + } - mmc_card_set_highspeed(card); + mmc_card_set_highspeed(card); - /* Check for host support for wide-bus modes. */ - if (!(host->caps & MMC_CAP_4_BIT_DATA)) { - continue; + host->ios.timing = MMC_TIMING_SD_HS; + mmc_set_ios(host); } - /* Activate 4-bit support. */ - cmd.opcode = MMC_SWITCH; - cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_BUS_WIDTH << 16) | - (EXT_CSD_BUS_WIDTH_4 << 8) | - EXT_CSD_CMD_SET_NORMAL; - cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + /* Check for host support for wide-bus modes. */ + if (host->caps & MMC_CAP_4_BIT_DATA) { + /* Activate 4-bit support. */ + cmd.opcode = MMC_SWITCH; + cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_BUS_WIDTH << 16) | + (EXT_CSD_BUS_WIDTH_4 << 8) | + EXT_CSD_CMD_SET_NORMAL; + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; - err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); - if (err != MMC_ERR_NONE) { - printk("%s: failed to switch card to " - "mmc v4 4-bit bus mode.\n", - mmc_hostname(card->host)); - continue; - } + err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); + if (err != MMC_ERR_NONE) { + printk("%s: failed to switch card to " + "mmc v4 4-bit bus mode.\n", + mmc_hostname(card->host)); + continue; + } - host->ios.bus_width = MMC_BUS_WIDTH_4; + host->ios.bus_width = MMC_BUS_WIDTH_4; + mmc_set_ios(host); + } } kfree(ext_csd); @@ -1241,6 +1248,9 @@ static void mmc_read_switch_caps(struct mmc_host *host) unsigned char *status; struct scatterlist sg; + if (!(host->caps & MMC_CAP_SD_HIGHSPEED)) + return; + status = kmalloc(64, GFP_KERNEL); if (!status) { printk(KERN_WARNING "%s: Unable to allocate buffer for " @@ -1332,6 +1342,9 @@ static void mmc_read_switch_caps(struct mmc_host *host) } mmc_card_set_highspeed(card); + + host->ios.timing = MMC_TIMING_SD_HS; + mmc_set_ios(host); } kfree(status); diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 7522f76b15ec..c52b167e8585 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -606,7 +606,6 @@ static void sdhci_finish_command(struct sdhci_host *host) static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { int div; - u8 ctrl; u16 clk; unsigned long timeout; @@ -615,13 +614,6 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); - ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); - if (clock > 25000000) - ctrl |= SDHCI_CTRL_HISPD; - else - ctrl &= ~SDHCI_CTRL_HISPD; - writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); - if (clock == 0) goto out; @@ -761,10 +753,17 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) sdhci_set_power(host, ios->vdd); ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); + if (ios->bus_width == MMC_BUS_WIDTH_4) ctrl |= SDHCI_CTRL_4BITBUS; else ctrl &= ~SDHCI_CTRL_4BITBUS; + + if (ios->timing == MMC_TIMING_SD_HS) + ctrl |= SDHCI_CTRL_HISPD; + else + ctrl &= ~SDHCI_CTRL_HISPD; + writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); mmiowb(); @@ -1274,6 +1273,9 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) mmc->f_max = host->max_clk; mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK; + if (caps & SDHCI_CAN_DO_HISPD) + mmc->caps |= MMC_CAP_SD_HIGHSPEED; + mmc->ocr_avail = 0; if (caps & SDHCI_CAN_VDD_330) mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34; @@ -1282,13 +1284,6 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) if (caps & SDHCI_CAN_VDD_180) mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19; - if ((host->max_clk > 25000000) && !(caps & SDHCI_CAN_DO_HISPD)) { - printk(KERN_ERR "%s: Controller reports > 25 MHz base clock," - " but no high speed support.\n", - host->slot_descr); - mmc->f_max = 25000000; - } - if (mmc->ocr_avail == 0) { printk(KERN_ERR "%s: Hardware doesn't report any " "support voltages.\n", host->slot_descr); |