summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/card/block.c14
-rw-r--r--drivers/mmc/host/mmci.c19
-rw-r--r--drivers/mmc/host/omap_hsmmc.c15
-rw-r--r--drivers/mmc/host/sdhci-spear.c4
4 files changed, 20 insertions, 32 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index dd2d374dcc7a..276d21ce6bc1 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -554,7 +554,6 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
- unsigned int timeout_us;
struct scatterlist sg;
@@ -574,23 +573,12 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
cmd.arg = 0;
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
- data.timeout_ns = card->csd.tacc_ns * 100;
- data.timeout_clks = card->csd.tacc_clks * 100;
-
- timeout_us = data.timeout_ns / 1000;
- timeout_us += data.timeout_clks * 1000 /
- (card->host->ios.clock / 1000);
-
- if (timeout_us > 100000) {
- data.timeout_ns = 100000000;
- data.timeout_clks = 0;
- }
-
data.blksz = 4;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
data.sg_len = 1;
+ mmc_set_data_timeout(&data, card);
mrq.cmd = &cmd;
mrq.data = &data;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index f0fcce40cd8d..50ff19a62368 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1216,12 +1216,7 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np,
int bus_width = 0;
pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
- if (!pdata->gpio_wp)
- pdata->gpio_wp = -1;
-
pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
- if (!pdata->gpio_cd)
- pdata->gpio_cd = -1;
if (of_get_property(np, "cd-inverted", NULL))
pdata->cd_invert = true;
@@ -1276,6 +1271,12 @@ static int __devinit mmci_probe(struct amba_device *dev,
return -EINVAL;
}
+ if (!plat) {
+ plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+ }
+
if (np)
mmci_dt_populate_generic_pdata(np, plat);
@@ -1424,6 +1425,10 @@ static int __devinit mmci_probe(struct amba_device *dev,
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
+ if (plat->gpio_cd == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_cd;
+ }
if (gpio_is_valid(plat->gpio_cd)) {
ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
if (ret == 0)
@@ -1447,6 +1452,10 @@ static int __devinit mmci_probe(struct amba_device *dev,
if (ret >= 0)
host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
}
+ if (plat->gpio_wp == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_wp;
+ }
if (gpio_is_valid(plat->gpio_wp)) {
ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
if (ret == 0)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 9a7a60aeb19e..389a3eedfc24 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -85,7 +85,6 @@
#define BRR_ENABLE (1 << 5)
#define DTO_ENABLE (1 << 20)
#define INIT_STREAM (1 << 1)
-#define ACEN_ACMD12 (1 << 2)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
#define DMA_EN 0x1
@@ -117,7 +116,6 @@
#define OMAP_MMC_MAX_CLOCK 52000000
#define DRIVER_NAME "omap_hsmmc"
-#define AUTO_CMD12 (1 << 0) /* Auto CMD12 support */
/*
* One controller can have multiple slots, like on some omap boards using
* omap.c controller driver. Luckily this is not currently done on any known
@@ -177,7 +175,6 @@ struct omap_hsmmc_host {
int reqs_blocked;
int use_reg;
int req_in_progress;
- unsigned int flags;
struct omap_hsmmc_next next_data;
struct omap_mmc_platform_data *pdata;
@@ -773,8 +770,6 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
cmdtype = 0x3;
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
- if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
- cmdreg |= ACEN_ACMD12;
if (data) {
cmdreg |= DP_SELECT | MSBS | BCE;
@@ -847,14 +842,11 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
else
data->bytes_xfered = 0;
- if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) {
- omap_hsmmc_start_command(host, data->stop, NULL);
- } else {
- if (data->stop)
- data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
- RSP76);
+ if (!data->stop) {
omap_hsmmc_request_done(host, data->mrq);
+ return;
}
+ omap_hsmmc_start_command(host, data->stop, NULL);
}
/*
@@ -1859,7 +1851,6 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
host->mapbase = res->start + pdata->reg_offset;
host->base = ioremap(host->mapbase, SZ_4K);
host->power_mode = MMC_POWER_OFF;
- host->flags = AUTO_CMD12;
host->next_data.cookie = 1;
platform_set_drvdata(pdev, host);
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 1fe32dfa7cd4..423da8194cd8 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -4,7 +4,7 @@
* Support of SDHCI platform devices for spear soc family
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired by sdhci-pltfm.c
*
@@ -289,5 +289,5 @@ static struct platform_driver sdhci_driver = {
module_platform_driver(sdhci_driver);
MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-31 02:11:51 +0000