summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci-of-esdhc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci-of-esdhc.c')
-rw-r--r--drivers/mmc/host/sdhci-of-esdhc.c36
1 files changed, 33 insertions, 3 deletions
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index f8eb1fb0c921..ae5fcbfa1eef 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -21,6 +21,32 @@
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
+#define VENDOR_V_22 0x12
+static u32 esdhc_readl(struct sdhci_host *host, int reg)
+{
+ u32 ret;
+
+ ret = in_be32(host->ioaddr + reg);
+ /*
+ * The bit of ADMA flag in eSDHC is not compatible with standard
+ * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
+ * supported by eSDHC.
+ * And for many FSL eSDHC controller, the reset value of field
+ * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
+ * only these vendor version is greater than 2.2/0x12 support ADMA.
+ * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
+ * the verdor version number, oxFE is SDHCI_HOST_VERSION.
+ */
+ if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
+ u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+ tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+ if (tmp > VENDOR_V_22)
+ ret |= SDHCI_CAN_DO_ADMA2;
+ }
+
+ return ret;
+}
+
static u16 esdhc_readw(struct sdhci_host *host, int reg)
{
u16 ret;
@@ -144,7 +170,7 @@ static void esdhc_of_resume(struct sdhci_host *host)
#endif
static struct sdhci_ops sdhci_esdhc_ops = {
- .read_l = sdhci_be32bs_readl,
+ .read_l = esdhc_readl,
.read_w = esdhc_readw,
.read_b = esdhc_readb,
.write_l = sdhci_be32bs_writel,
@@ -161,9 +187,13 @@ static struct sdhci_ops sdhci_esdhc_ops = {
};
static struct sdhci_pltfm_data sdhci_esdhc_pdata = {
- /* card detection could be handled via GPIO */
+ /*
+ * card detection could be handled via GPIO
+ * eSDHC cannot support End Attribute in NOP ADMA descriptor
+ */
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
- | SDHCI_QUIRK_NO_CARD_NO_RESET,
+ | SDHCI_QUIRK_NO_CARD_NO_RESET
+ | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.ops = &sdhci_esdhc_ops,
};