5 files changed, 99 insertions, 6 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 6db36dc870b5..9020cb2490f7 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -144,8 +144,9 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 	int err = cmd->error;
 
 	/* Flag re-tuning needed on CRC errors */
-	if ((cmd->opcode != MMC_SEND_TUNING_BLOCK &&
-	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
+	if (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
+	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
+	    !host->retune_crc_disable &&
 	    (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
 	    (mrq->data && mrq->data->error == -EILSEQ) ||
 	    (mrq->stop && mrq->stop->error == -EILSEQ)))
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 3e786ba204c3..671bfcceea6a 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1212,13 +1212,13 @@ static int mmc_select_hs400(struct mmc_card *card)
 	mmc_set_timing(host, MMC_TIMING_MMC_HS400);
 	mmc_set_bus_speed(card);
 
+	if (host->ops->hs400_complete)
+		host->ops->hs400_complete(host);
+
 	err = mmc_switch_status(card);
 	if (err)
 		goto out_err;
 
-	if (host->ops->hs400_complete)
-		host->ops->hs400_complete(host);
-
 	return 0;
 
 out_err:
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index d1aa1c7577bb..712a7742765e 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -937,6 +937,10 @@ static int mmc_sdio_pre_suspend(struct mmc_host *host)
  */
 static int mmc_sdio_suspend(struct mmc_host *host)
 {
+	/* Prevent processing of SDIO IRQs in suspended state. */
+	mmc_card_set_suspended(host->card);
+	cancel_delayed_work_sync(&host->sdio_irq_work);
+
 	mmc_claim_host(host);
 
 	if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host))
@@ -985,13 +989,20 @@ static int mmc_sdio_resume(struct mmc_host *host)
 		err = sdio_enable_4bit_bus(host->card);
 	}
 
-	if (!err && host->sdio_irqs) {
+	if (err)
+		goto out;
+
+	/* Allow SDIO IRQs to be processed again. */
+	mmc_card_clr_suspended(host->card);
+
+	if (host->sdio_irqs) {
 		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD))
 			wake_up_process(host->sdio_irq_thread);
 		else if (host->caps & MMC_CAP_SDIO_IRQ)
 			host->ops->enable_sdio_irq(host, 1);
 	}
 
+out:
 	mmc_release_host(host);
 
 	host->pm_flags &= ~MMC_PM_KEEP_POWER;
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index f79f0b0caab8..2ba00acf64e6 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -15,6 +15,7 @@
 #include "sdio_ops.h"
 #include "core.h"
 #include "card.h"
+#include "host.h"
 
 /**
  *	sdio_claim_host - exclusively claim a bus for a certain SDIO function
@@ -734,3 +735,79 @@ int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags);
+
+/**
+ *	sdio_retune_crc_disable - temporarily disable retuning on CRC errors
+ *	@func: SDIO function attached to host
+ *
+ *	If the SDIO card is known to be in a state where it might produce
+ *	CRC errors on the bus in response to commands (like if we know it is
+ *	transitioning between power states), an SDIO function driver can
+ *	call this function to temporarily disable the SD/MMC core behavior of
+ *	triggering an automatic retuning.
+ *
+ *	This function should be called while the host is claimed and the host
+ *	should remain claimed until sdio_retune_crc_enable() is called.
+ *	Specifically, the expected sequence of calls is:
+ *	- sdio_claim_host()
+ *	- sdio_retune_crc_disable()
+ *	- some number of calls like sdio_writeb() and sdio_readb()
+ *	- sdio_retune_crc_enable()
+ *	- sdio_release_host()
+ */
+void sdio_retune_crc_disable(struct sdio_func *func)
+{
+	func->card->host->retune_crc_disable = true;
+}
+EXPORT_SYMBOL_GPL(sdio_retune_crc_disable);
+
+/**
+ *	sdio_retune_crc_enable - re-enable retuning on CRC errors
+ *	@func: SDIO function attached to host
+ *
+ *	This is the compement to sdio_retune_crc_disable().
+ */
+void sdio_retune_crc_enable(struct sdio_func *func)
+{
+	func->card->host->retune_crc_disable = false;
+}
+EXPORT_SYMBOL_GPL(sdio_retune_crc_enable);
+
+/**
+ *	sdio_retune_hold_now - start deferring retuning requests till release
+ *	@func: SDIO function attached to host
+ *
+ *	This function can be called if it's currently a bad time to do
+ *	a retune of the SDIO card.  Retune requests made during this time
+ *	will be held and we'll actually do the retune sometime after the
+ *	release.
+ *
+ *	This function could be useful if an SDIO card is in a power state
+ *	where it can respond to a small subset of commands that doesn't
+ *	include the retuning command.  Care should be taken when using
+ *	this function since (presumably) the retuning request we might be
+ *	deferring was made for a good reason.
+ *
+ *	This function should be called while the host is claimed.
+ */
+void sdio_retune_hold_now(struct sdio_func *func)
+{
+	mmc_retune_hold_now(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_hold_now);
+
+/**
+ *	sdio_retune_release - signal that it's OK to retune now
+ *	@func: SDIO function attached to host
+ *
+ *	This is the complement to sdio_retune_hold_now().  Calling this
+ *	function won't make a retune happen right away but will allow
+ *	them to be scheduled normally.
+ *
+ *	This function should be called while the host is claimed.
+ */
+void sdio_retune_release(struct sdio_func *func)
+{
+	mmc_retune_release(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_release);
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 931e6226c0b3..9f54a259a1b3 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -34,6 +34,10 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 	unsigned char pending;
 	struct sdio_func *func;
 
+	/* Don't process SDIO IRQs if the card is suspended. */
+	if (mmc_card_suspended(card))
+		return 0;
+
 	/*
 	 * Optimization, if there is only 1 function interrupt registered
 	 * and we know an IRQ was signaled then call irq handler directly.