diff options
Diffstat (limited to 'drivers/media/rc')
-rw-r--r-- | drivers/media/rc/Kconfig | 12 | ||||
-rw-r--r-- | drivers/media/rc/Makefile | 1 | ||||
-rw-r--r-- | drivers/media/rc/keymaps/Makefile | 1 | ||||
-rw-r--r-- | drivers/media/rc/keymaps/rc-xbox-dvd.c | 63 | ||||
-rw-r--r-- | drivers/media/rc/xbox_remote.c | 305 |
5 files changed, 382 insertions, 0 deletions
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 1021c08a9ba4..8a216068a35a 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -493,6 +493,18 @@ config IR_TANGO The HW decoder supports NEC, RC-5, RC-6 IR protocols. When compiled as a module, look for tango-ir. +config RC_XBOX_DVD + tristate "Xbox DVD Movie Playback Kit" + depends on RC_CORE + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use the Xbox DVD Movie Playback Kit. + These are IR remotes with USB receivers for the Original Xbox (2001). + + To compile this driver as a module, choose M here: the module will be + called xbox_remote. + config IR_ZX tristate "ZTE ZX IR remote control" depends on RC_CORE diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index e0340d043fe8..92c163816849 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -48,3 +48,4 @@ obj-$(CONFIG_IR_SIR) += sir_ir.o obj-$(CONFIG_IR_MTK) += mtk-cir.o obj-$(CONFIG_IR_ZX) += zx-irdec.o obj-$(CONFIG_IR_TANGO) += tango-ir.o +obj-$(CONFIG_RC_XBOX_DVD) += xbox_remote.o diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile index d6b913a3032d..5b1399af6b3a 100644 --- a/drivers/media/rc/keymaps/Makefile +++ b/drivers/media/rc/keymaps/Makefile @@ -116,4 +116,5 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-winfast.o \ rc-winfast-usbii-deluxe.o \ rc-su3000.o \ + rc-xbox-dvd.o \ rc-zx-irdec.o diff --git a/drivers/media/rc/keymaps/rc-xbox-dvd.c b/drivers/media/rc/keymaps/rc-xbox-dvd.c new file mode 100644 index 000000000000..61da6706715c --- /dev/null +++ b/drivers/media/rc/keymaps/rc-xbox-dvd.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Keytable for Xbox DVD remote +// Copyright (c) 2018 by Benjamin Valentin <benpicco@googlemail.com> + +#include <media/rc-map.h> +#include <linux/module.h> + +/* based on lircd.conf.xbox */ +static struct rc_map_table xbox_dvd[] = { + {0x0b, KEY_OK}, + {0xa6, KEY_UP}, + {0xa7, KEY_DOWN}, + {0xa8, KEY_RIGHT}, + {0xa9, KEY_LEFT}, + {0xc3, KEY_INFO}, + + {0xc6, KEY_9}, + {0xc7, KEY_8}, + {0xc8, KEY_7}, + {0xc9, KEY_6}, + {0xca, KEY_5}, + {0xcb, KEY_4}, + {0xcc, KEY_3}, + {0xcd, KEY_2}, + {0xce, KEY_1}, + {0xcf, KEY_0}, + + {0xd5, KEY_ANGLE}, + {0xd8, KEY_BACK}, + {0xdd, KEY_PREVIOUSSONG}, + {0xdf, KEY_NEXTSONG}, + {0xe0, KEY_STOP}, + {0xe2, KEY_REWIND}, + {0xe3, KEY_FASTFORWARD}, + {0xe5, KEY_TITLE}, + {0xe6, KEY_PAUSE}, + {0xea, KEY_PLAY}, + {0xf7, KEY_MENU}, +}; + +static struct rc_map_list xbox_dvd_map = { + .map = { + .scan = xbox_dvd, + .size = ARRAY_SIZE(xbox_dvd), + .rc_proto = RC_PROTO_UNKNOWN, + .name = RC_MAP_XBOX_DVD, + } +}; + +static int __init init_rc_map(void) +{ + return rc_map_register(&xbox_dvd_map); +} + +static void __exit exit_rc_map(void) +{ + rc_map_unregister(&xbox_dvd_map); +} + +module_init(init_rc_map) +module_exit(exit_rc_map) + +MODULE_LICENSE("GPL"); diff --git a/drivers/media/rc/xbox_remote.c b/drivers/media/rc/xbox_remote.c new file mode 100644 index 000000000000..141ef9253018 --- /dev/null +++ b/drivers/media/rc/xbox_remote.c @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Driver for Xbox DVD Movie Playback Kit +// Copyright (c) 2018 by Benjamin Valentin <benpicco@googlemail.com> + +/* + * Xbox DVD Movie Playback Kit USB IR dongle support + * + * The driver was derived from the ati_remote driver 2.2.1 + * and used information from lirc_xbox.c + * + * Copyright (c) 2011, 2012 Anssi Hannula <anssi.hannula@iki.fi> + * Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net> + * Copyright (c) 2002 Vladimir Dergachev + * Copyright (c) 2003-2004 Paul Miller <pmiller9@users.sourceforge.net> + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb/input.h> +#include <media/rc-core.h> + +/* + * Module and Version Information + */ +#define DRIVER_VERSION "1.0.0" +#define DRIVER_AUTHOR "Benjamin Valentin <benpicco@googlemail.com>" +#define DRIVER_DESC "Xbox DVD USB Remote Control" + +#define NAME_BUFSIZE 80 /* size of product name, path buffers */ +#define DATA_BUFSIZE 8 /* size of URB data buffers */ + +/* + * USB vendor ids for XBOX DVD Dongles + */ +#define VENDOR_GAMESTER 0x040b +#define VENDOR_MICROSOFT 0x045e + +static const struct usb_device_id xbox_remote_table[] = { + /* Gamester Xbox DVD Movie Playback Kit IR */ + { + USB_DEVICE(VENDOR_GAMESTER, 0x6521), + }, + /* Microsoft Xbox DVD Movie Playback Kit IR */ + { + USB_DEVICE(VENDOR_MICROSOFT, 0x0284), + }, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, xbox_remote_table); + +struct xbox_remote { + struct rc_dev *rdev; + struct usb_device *udev; + struct usb_interface *interface; + + struct urb *irq_urb; + unsigned char inbuf[DATA_BUFSIZE]; + + char rc_name[NAME_BUFSIZE]; + char rc_phys[NAME_BUFSIZE]; +}; + +static int xbox_remote_rc_open(struct rc_dev *rdev) +{ + struct xbox_remote *xbox_remote = rdev->priv; + + /* On first open, submit the read urb which was set up previously. */ + xbox_remote->irq_urb->dev = xbox_remote->udev; + if (usb_submit_urb(xbox_remote->irq_urb, GFP_KERNEL)) { + dev_err(&xbox_remote->interface->dev, + "%s: usb_submit_urb failed!\n", __func__); + return -EIO; + } + + return 0; +} + +static void xbox_remote_rc_close(struct rc_dev *rdev) +{ + struct xbox_remote *xbox_remote = rdev->priv; + + usb_kill_urb(xbox_remote->irq_urb); +} + +/* + * xbox_remote_report_input + */ +static void xbox_remote_input_report(struct urb *urb) +{ + struct xbox_remote *xbox_remote = urb->context; + unsigned char *data = xbox_remote->inbuf; + + /* + * data[0] = 0x00 + * data[1] = length - always 0x06 + * data[2] = the key code + * data[3] = high part of key code? - always 0x0a + * data[4] = last_press_ms (low) + * data[5] = last_press_ms (high) + */ + + /* Deal with strange looking inputs */ + if (urb->actual_length != 6 || urb->actual_length != data[1]) { + dev_warn(&urb->dev->dev, "Weird data, len=%d: %*ph\n", + urb->actual_length, urb->actual_length, data); + return; + } + + rc_keydown(xbox_remote->rdev, RC_PROTO_UNKNOWN, data[2], 0); +} + +/* + * xbox_remote_irq_in + */ +static void xbox_remote_irq_in(struct urb *urb) +{ + struct xbox_remote *xbox_remote = urb->context; + int retval; + + switch (urb->status) { + case 0: /* success */ + xbox_remote_input_report(urb); + break; + case -ECONNRESET: /* unlink */ + case -ENOENT: + case -ESHUTDOWN: + dev_dbg(&xbox_remote->interface->dev, + "%s: urb error status, unlink?\n", + __func__); + return; + default: /* error */ + dev_dbg(&xbox_remote->interface->dev, + "%s: Nonzero urb status %d\n", + __func__, urb->status); + } + + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&xbox_remote->interface->dev, + "%s: usb_submit_urb()=%d\n", + __func__, retval); +} + +static void xbox_remote_rc_init(struct xbox_remote *xbox_remote) +{ + struct rc_dev *rdev = xbox_remote->rdev; + + rdev->priv = xbox_remote; + rdev->allowed_protocols = RC_PROTO_BIT_UNKNOWN; + rdev->driver_name = "xbox_remote"; + + rdev->open = xbox_remote_rc_open; + rdev->close = xbox_remote_rc_close; + + rdev->device_name = xbox_remote->rc_name; + rdev->input_phys = xbox_remote->rc_phys; + + usb_to_input_id(xbox_remote->udev, &rdev->input_id); + rdev->dev.parent = &xbox_remote->interface->dev; +} + +static int xbox_remote_initialize(struct xbox_remote *xbox_remote, + struct usb_endpoint_descriptor *endpoint_in) +{ + struct usb_device *udev = xbox_remote->udev; + int pipe, maxp; + + /* Set up irq_urb */ + pipe = usb_rcvintpipe(udev, endpoint_in->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; + + usb_fill_int_urb(xbox_remote->irq_urb, udev, pipe, xbox_remote->inbuf, + maxp, xbox_remote_irq_in, xbox_remote, + endpoint_in->bInterval); + + return 0; +} + +/* + * xbox_remote_probe + */ +static int xbox_remote_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *iface_host = interface->cur_altsetting; + struct usb_endpoint_descriptor *endpoint_in; + struct xbox_remote *xbox_remote; + struct rc_dev *rc_dev; + int err = -ENOMEM; + + // why is there also a device with no endpoints? + if (iface_host->desc.bNumEndpoints == 0) + return -ENODEV; + + if (iface_host->desc.bNumEndpoints != 1) { + pr_err("%s: Unexpected desc.bNumEndpoints: %d\n", + __func__, iface_host->desc.bNumEndpoints); + return -ENODEV; + } + + endpoint_in = &iface_host->endpoint[0].desc; + + if (!usb_endpoint_is_int_in(endpoint_in)) { + pr_err("%s: Unexpected endpoint_in\n", __func__); + return -ENODEV; + } + if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { + pr_err("%s: endpoint_in message size==0?\n", __func__); + return -ENODEV; + } + + xbox_remote = kzalloc(sizeof(*xbox_remote), GFP_KERNEL); + rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE); + if (!xbox_remote || !rc_dev) + goto exit_free_dev_rdev; + + /* Allocate URB buffer */ + xbox_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!xbox_remote->irq_urb) + goto exit_free_buffers; + + xbox_remote->udev = udev; + xbox_remote->rdev = rc_dev; + xbox_remote->interface = interface; + + usb_make_path(udev, xbox_remote->rc_phys, sizeof(xbox_remote->rc_phys)); + + strlcat(xbox_remote->rc_phys, "/input0", sizeof(xbox_remote->rc_phys)); + + snprintf(xbox_remote->rc_name, sizeof(xbox_remote->rc_name), "%s%s%s", + udev->manufacturer ?: "", + udev->manufacturer && udev->product ? " " : "", + udev->product ?: ""); + + if (!strlen(xbox_remote->rc_name)) + snprintf(xbox_remote->rc_name, sizeof(xbox_remote->rc_name), + DRIVER_DESC "(%04x,%04x)", + le16_to_cpu(xbox_remote->udev->descriptor.idVendor), + le16_to_cpu(xbox_remote->udev->descriptor.idProduct)); + + rc_dev->map_name = RC_MAP_XBOX_DVD; /* default map */ + + xbox_remote_rc_init(xbox_remote); + + /* Device Hardware Initialization */ + err = xbox_remote_initialize(xbox_remote, endpoint_in); + if (err) + goto exit_kill_urbs; + + /* Set up and register rc device */ + err = rc_register_device(xbox_remote->rdev); + if (err) + goto exit_kill_urbs; + + usb_set_intfdata(interface, xbox_remote); + + return 0; + +exit_kill_urbs: + usb_kill_urb(xbox_remote->irq_urb); +exit_free_buffers: + usb_free_urb(xbox_remote->irq_urb); +exit_free_dev_rdev: + rc_free_device(rc_dev); + kfree(xbox_remote); + + return err; +} + +/* + * xbox_remote_disconnect + */ +static void xbox_remote_disconnect(struct usb_interface *interface) +{ + struct xbox_remote *xbox_remote; + + xbox_remote = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + if (!xbox_remote) { + dev_warn(&interface->dev, "%s - null device?\n", __func__); + return; + } + + usb_kill_urb(xbox_remote->irq_urb); + rc_unregister_device(xbox_remote->rdev); + usb_free_urb(xbox_remote->irq_urb); + kfree(xbox_remote); +} + +/* usb specific object to register with the usb subsystem */ +static struct usb_driver xbox_remote_driver = { + .name = "xbox_remote", + .probe = xbox_remote_probe, + .disconnect = xbox_remote_disconnect, + .id_table = xbox_remote_table, +}; + +module_usb_driver(xbox_remote_driver); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); |