diff options
Diffstat (limited to 'drivers/media/i2c/max9271.h')
| -rw-r--r-- | drivers/media/i2c/max9271.h | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/drivers/media/i2c/max9271.h b/drivers/media/i2c/max9271.h new file mode 100644 index 000000000000..d78fb21441e9 --- /dev/null +++ b/drivers/media/i2c/max9271.h @@ -0,0 +1,224 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2017-2020 Jacopo Mondi + * Copyright (C) 2017-2020 Kieran Bingham + * Copyright (C) 2017-2020 Laurent Pinchart + * Copyright (C) 2017-2020 Niklas Söderlund + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + */ + +#include <linux/i2c.h> + +#define MAX9271_DEFAULT_ADDR 0x40 + +/* Register 0x02 */ +#define MAX9271_SPREAD_SPECT_0 (0 << 5) +#define MAX9271_SPREAD_SPECT_05 (1 << 5) +#define MAX9271_SPREAD_SPECT_15 (2 << 5) +#define MAX9271_SPREAD_SPECT_1 (5 << 5) +#define MAX9271_SPREAD_SPECT_2 (3 << 5) +#define MAX9271_SPREAD_SPECT_3 (6 << 5) +#define MAX9271_SPREAD_SPECT_4 (7 << 5) +#define MAX9271_R02_RES BIT(4) +#define MAX9271_PCLK_AUTODETECT (3 << 2) +#define MAX9271_SERIAL_AUTODETECT (0x03) +/* Register 0x04 */ +#define MAX9271_SEREN BIT(7) +#define MAX9271_CLINKEN BIT(6) +#define MAX9271_PRBSEN BIT(5) +#define MAX9271_SLEEP BIT(4) +#define MAX9271_INTTYPE_I2C (0 << 2) +#define MAX9271_INTTYPE_UART (1 << 2) +#define MAX9271_INTTYPE_NONE (2 << 2) +#define MAX9271_REVCCEN BIT(1) +#define MAX9271_FWDCCEN BIT(0) +/* Register 0x07 */ +#define MAX9271_DBL BIT(7) +#define MAX9271_DRS BIT(6) +#define MAX9271_BWS BIT(5) +#define MAX9271_ES BIT(4) +#define MAX9271_HVEN BIT(2) +#define MAX9271_EDC_1BIT_PARITY (0 << 0) +#define MAX9271_EDC_6BIT_CRC (1 << 0) +#define MAX9271_EDC_6BIT_HAMMING (2 << 0) +/* Register 0x08 */ +#define MAX9271_INVVS BIT(7) +#define MAX9271_INVHS BIT(6) +#define MAX9271_REV_LOGAIN BIT(3) +#define MAX9271_REV_HIVTH BIT(0) +/* Register 0x09 */ +#define MAX9271_ID 0x09 +/* Register 0x0d */ +#define MAX9271_I2CLOCACK BIT(7) +#define MAX9271_I2CSLVSH_1046NS_469NS (3 << 5) +#define MAX9271_I2CSLVSH_938NS_352NS (2 << 5) +#define MAX9271_I2CSLVSH_469NS_234NS (1 << 5) +#define MAX9271_I2CSLVSH_352NS_117NS (0 << 5) +#define MAX9271_I2CMSTBT_837KBPS (7 << 2) +#define MAX9271_I2CMSTBT_533KBPS (6 << 2) +#define MAX9271_I2CMSTBT_339KBPS (5 << 2) +#define MAX9271_I2CMSTBT_173KBPS (4 << 2) +#define MAX9271_I2CMSTBT_105KBPS (3 << 2) +#define MAX9271_I2CMSTBT_84KBPS (2 << 2) +#define MAX9271_I2CMSTBT_28KBPS (1 << 2) +#define MAX9271_I2CMSTBT_8KBPS (0 << 2) +#define MAX9271_I2CSLVTO_NONE (3 << 0) +#define MAX9271_I2CSLVTO_1024US (2 << 0) +#define MAX9271_I2CSLVTO_256US (1 << 0) +#define MAX9271_I2CSLVTO_64US (0 << 0) +/* Register 0x0f */ +#define MAX9271_GPIO5OUT BIT(5) +#define MAX9271_GPIO4OUT BIT(4) +#define MAX9271_GPIO3OUT BIT(3) +#define MAX9271_GPIO2OUT BIT(2) +#define MAX9271_GPIO1OUT BIT(1) +#define MAX9271_GPO BIT(0) +/* Register 0x15 */ +#define MAX9271_PCLKDET BIT(0) + +/** + * struct max9271_device - max9271 device + * @client: The i2c client for the max9271 instance + */ +struct max9271_device { + struct i2c_client *client; +}; + +/** + * max9271_set_serial_link() - Enable/disable serial link + * @dev: The max9271 device + * @enable: Serial link enable/disable flag + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_serial_link(struct max9271_device *dev, bool enable); + +/** + * max9271_configure_i2c() - Configure I2C bus parameters + * @dev: The max9271 device + * @i2c_config: The I2C bus configuration bit mask + * + * Configure MAX9271 I2C interface. The bus configuration provided in the + * @i2c_config parameter shall be assembled using bit values defined by the + * MAX9271_I2C* macros. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config); + +/** + * max9271_set_high_threshold() - Enable or disable reverse channel high + * threshold + * @dev: The max9271 device + * @enable: High threshold enable/disable flag + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_high_threshold(struct max9271_device *dev, bool enable); + +/** + * max9271_configure_gmsl_link() - Configure the GMSL link + * @dev: The max9271 device + * + * FIXME: the GMSL link configuration is currently hardcoded and performed + * by programming registers 0x04, 0x07 and 0x02. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_configure_gmsl_link(struct max9271_device *dev); + +/** + * max9271_set_gpios() - Set gpio lines to physical high value + * @dev: The max9271 device + * @gpio_mask: The mask of gpio lines to set to high value + * + * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]* + * bit values. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask); + +/** + * max9271_clear_gpios() - Set gpio lines to physical low value + * @dev: The max9271 device + * @gpio_mask: The mask of gpio lines to set to low value + * + * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]* + * bit values. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask); + +/** + * max9271_enable_gpios() - Enable gpio lines + * @dev: The max9271 device + * @gpio_mask: The mask of gpio lines to enable + * + * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO* + * bit values. GPO line is always enabled by default. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask); + +/** + * max9271_disable_gpios() - Disable gpio lines + * @dev: The max9271 device + * @gpio_mask: The mask of gpio lines to disable + * + * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO* + * bit values. GPO line is always enabled by default and cannot be disabled. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_disable_gpios(struct max9271_device *dev, u8 gpio_mask); + +/** + * max9271_verify_id() - Read and verify MAX9271 id + * @dev: The max9271 device + * + * Return 0 on success or a negative error code on failure + */ +int max9271_verify_id(struct max9271_device *dev); + +/** + * max9271_set_address() - Program a new I2C address + * @dev: The max9271 device + * @addr: The new I2C address in 7-bit format + * + * This function only takes care of programming the new I2C address @addr to + * in the MAX9271 chip registers, it is responsiblity of the caller to set + * the i2c address client to the @addr value to be able to communicate with + * the MAX9271 chip using the I2C framework APIs after this function returns. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_address(struct max9271_device *dev, u8 addr); + +/** + * max9271_set_deserializer_address() - Program the remote deserializer address + * @dev: The max9271 device + * @addr: The deserializer I2C address in 7-bit format + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_deserializer_address(struct max9271_device *dev, u8 addr); + +/** + * max9271_set_translation() - Program I2C address translation + * @dev: The max9271 device + * @source: The I2C source address + * @dest: The I2C destination address + * + * Program address translation from @source to @dest. This is required to + * communicate with local devices that do not support address reprogramming. + * + * TODO: The device supports translation of two address, this function currently + * supports a single one. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_translation(struct max9271_device *dev, u8 source, u8 dest); |