diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/rmi4/rmi_f01.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c index eb362bc71a4c..fac81fc9bcf6 100644 --- a/drivers/input/rmi4/rmi_f01.c +++ b/drivers/input/rmi4/rmi_f01.c @@ -81,26 +81,26 @@ struct f01_basic_properties { * This bit disables whatever sleep mode may be selected by the sleep_mode * field and forces the device to run at full power without sleeping. */ -#define RMI_F01_CRTL0_NOSLEEP_BIT BIT(2) +#define RMI_F01_CTRL0_NOSLEEP_BIT BIT(2) /* * When this bit is set, the touch controller employs a noise-filtering * algorithm designed for use with a connected battery charger. */ -#define RMI_F01_CRTL0_CHARGER_BIT BIT(5) +#define RMI_F01_CTRL0_CHARGER_BIT BIT(5) /* * Sets the report rate for the device. The effect of this setting is * highly product dependent. Check the spec sheet for your particular * touch sensor. */ -#define RMI_F01_CRTL0_REPORTRATE_BIT BIT(6) +#define RMI_F01_CTRL0_REPORTRATE_BIT BIT(6) /* * Written by the host as an indicator that the device has been * successfully configured. */ -#define RMI_F01_CRTL0_CONFIGURED_BIT BIT(7) +#define RMI_F01_CTRL0_CONFIGURED_BIT BIT(7) /** * @ctrl0 - see the bit definitions above. @@ -330,10 +330,10 @@ static int rmi_f01_probe(struct rmi_function *fn) case RMI_F01_NOSLEEP_DEFAULT: break; case RMI_F01_NOSLEEP_OFF: - f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_NOSLEEP_BIT; break; case RMI_F01_NOSLEEP_ON: - f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT; break; } @@ -349,7 +349,7 @@ static int rmi_f01_probe(struct rmi_function *fn) f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK; } - f01->device_control.ctrl0 |= RMI_F01_CRTL0_CONFIGURED_BIT; + f01->device_control.ctrl0 |= RMI_F01_CTRL0_CONFIGURED_BIT; error = rmi_write(rmi_dev, fn->fd.control_base_addr, f01->device_control.ctrl0); @@ -535,8 +535,8 @@ static int rmi_f01_suspend(struct rmi_function *fn) int error; f01->old_nosleep = - f01->device_control.ctrl0 & RMI_F01_CRTL0_NOSLEEP_BIT; - f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 & RMI_F01_CTRL0_NOSLEEP_BIT; + f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_NOSLEEP_BIT; f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK; if (device_may_wakeup(fn->rmi_dev->xport->dev)) @@ -549,7 +549,7 @@ static int rmi_f01_suspend(struct rmi_function *fn) if (error) { dev_err(&fn->dev, "Failed to write sleep mode: %d.\n", error); if (f01->old_nosleep) - f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT; f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK; f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL; return error; @@ -564,7 +564,7 @@ static int rmi_f01_resume(struct rmi_function *fn) int error; if (f01->old_nosleep) - f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT; f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK; f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL; |